diff options
Diffstat (limited to 'docs/files/EventRegistration-v2.0.rst')
| -rw-r--r-- | docs/files/EventRegistration-v2.0.rst | 2884 |
1 files changed, 2884 insertions, 0 deletions
diff --git a/docs/files/EventRegistration-v2.0.rst b/docs/files/EventRegistration-v2.0.rst new file mode 100644 index 0000000..917b997 --- /dev/null +++ b/docs/files/EventRegistration-v2.0.rst @@ -0,0 +1,2884 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. Copyright 2017 AT&T Intellectual Property, All rights reserved +.. Copyright 2017-2018 Huawei Technologies Co., Ltd. + +========================== +VES Event Registration 2.0 +========================== + +.. contents:: Table of Contents + +Introduction +============ + +This document specifies a YAML format for the registration of VES +Events. The YAML format enables both human designers and applications to +parse and understand the fields that will be sent by event sources in +conjunction with specific types of events, which are identified by their +eventNames. + +The semantics of the YAML format are easily extensible to accommodate +processing needs that may arise in the future. Among the types of +information specified in the YAML are field optionality, restrictions on +field values, and event handling recommendations and requirements. + +This document should be read in conjunction with the VES Event Listener +service specification, which defines the Common Event Format and +introduces the concept of specific types of events, identified by +eventNames. + +Audience +-------- + +This document is intended to support the following groups: + +- VNF Vendors + +- Service Provider (e.g., AT&T) Teams responsible for deploying VNFs + within their infrastructure + +VNF vendors will provide a YAML file to the Service Provider that +describes the events that their VNFs generate. Using the semantics and +syntax supported by YAML, vendors will indicate specific conditions that +may arise, and recommend actions that should be taken at specific +thresholds, or if specific conditions repeat within a specified time +interval. + +Based on the vendor’s recommendations, the Service Provider may create +another YAML, which finalizes their engineering rules for the processing +of the vendor’s events. The Service Provider may alter the threshold +levels recommended by the vendor, and may modify and more clearly +specify actions that should be taken when specified conditions arise. +The Service Provided-created version of the YAML will be distributed to +Service Provider applications at design time. + +Goal +---- + +The goal of the YAML is to completely describe the processing of VNF +events in a way that can be compiled or interpreted by applications +across a Service Provider’s infrastructure. + +Relation to the Common Event Format +----------------------------------- + +The Common Event Format described in the VES Event Listener service +specification defines the structure of VES events including optional +fields that may be provided. + +Specific eventNames registered by the YAML (e.g., an InvalidLicense +fault), may require that certain fields, which are optional in the +Common Event Format, be present when events with that eventName are +published. For example, a fault eventName which communicates an +‘InvalidLicense’ condition, may be registered to require that the +configured ‘licenseKey’ be provided as a name-value pair in the Common +Event Format’s ‘additionalFields’ structure, within the ‘faultFields’ +block. Anytime an ‘InvalidLicense’ fault event is detected, designers, +applications and microservices across the Service Provider’s +infrastructure can count on that name-value pair being present. + +The YAML registration may also restrict ranges or enumerations defined +in the Common Event Format. For example, eventSeverity is an enumerated +string within the Common Event Format with several values ranging from +‘NORMAL’ to ‘CRITICAL’. The YAML registration for a particular eventName +may require that it always be sent with eventSeverity set to a single +value (e.g., ‘MINOR’), or to a subset of the possible enumerated values +allowed by the Common Event Format (e.g., ‘MINOR’ or ‘NORMAL’). + +Relation to Service Design and Creation +--------------------------------------- + +Event registration for a VNF (or other event source) is provided to the +Service Provider’s Service Creation and Design Environment (e.g., SDC) +as a set of two YAML files consisting of the vendor recommendation YAML +and (optionally) the final Service Provider YAML. These YAML files +describe all the eventNames that that VNF (or other event source) +generates. + +Once their events are registered, the Service Creation and Design +Environment can then list the registered eventNames (e.g., as a drop +down list), for each VNF or other event source (e.g., a service), and +enable designers to study the YAML registrations for specific +eventNames. YAML registrations are both human readable and machine +readable. + +The final Service Provider YAML is a type of Service Design and Creation +‘artifact’, which can be distributed to Service Provider applications at +design time: notably, to applications involved in the collection and +processing of VNF events. It can be parsed by those applications so they +can support the receipt and processing of VNF events, without the need +for any manual, VNF-specific development. + +YAML Files +========== + +YAML Specification Conformance +------------------------------ + +YAML files should conform to version 1.2 of the YAML specification +available at: http://yaml.org/spec/1.2/spec.html. + +Filename +-------- + +YAML file names should conform to the following naming convention: + + {NamingCode}_{ModelType}_{v#}_{AdditionalInfo}.yml + +The NamingCode identifies the entity, whose events are being registered +in the yaml, with a naming code that was established in the Service +Providers’ Service Design and Creation Environment (SDC). Example Naming +codes are: + +- tbcx + +- sgsn-mme + +The ModelType describes the type of entity whose events are being +registered. It consists of values like: + +- service + +- vfModule + +- vnf + +- vnfc + +The ‘#’ should be replaced with the current numbered version of the +file. Note that ‘#’ can be an integer or a number of the form x.y or +x.y.z (where x is the major number, y is the minor number and z is the +patch number) + +Additional descriptive info may be added after the version information + +Example file name: + +- vIsbcSsc_vnfc_v1.yml + +File Structure +-------------- + +Each eventType is registered as a distinct YAML ‘document’. + +YAML files consist of a series of YAML documents delimited by ‘---‘ and +‘…’ for example: + + --- + + # Event Registration for eventName ‘name1’ + + # details omitted + + ... + + --- + + # Event Registration for eventName ‘name2’ + + # details omitted + + ... + + --- + + # Event Registration for eventName ‘name3’ + + # details omitted + + ... + +YAML Syntax and Semantics +========================= + +YAML registration documents show each relevant VES Common Event Model +object and field (i.e., each element) for the eventName being +registered, including any extensible fields (e.g., specific name-value +pairs). + +Qualifiers +---------- + +Each object or field name in the eventName being registered is followed +by a ‘qualifier’, which consists of a colon and two curly braces, for +example: + + “objectOrFieldName: { }” + +The curly braces contain meta-information about that object or field +name (also known as the ‘element’), such as whether it is required to be +present, what values it may have, what handling it should trigger, etc… + +Semantics have been defined for the following types of meta-information +within the curly braces: + +Action +~~~~~~ + +The ‘action’ keyword may be applied to field values or to the event as a +whole. The ‘action’ keyword specifies a set of actions that should be +taken if a specified trigger occurs. For example, the ‘action’ keyword +may specify that a threshold crossing alert (i.e., tca) be generated, +and/or that a specific microservice handler be invoked, and/or that a +specific named-condition be asserted. In the Rules section of the YAML +file, tca’s and microservices may be defined on individual +named-conditions or on logical combinations of named-conditions. + +The ‘action:’ keyword is followed by five values in square brackets. The +first two values communicate the trigger, and the last three values +communicate the actions to be taken if that trigger occurs: + +1. The first value conveys the trigger level. If the field on which the + action is defined reaches or passes through that level, then the + trigger fires. If a specific level is not important to the + recommended action, the ‘any’ keyword may be used as the first value. + (Note: ‘any’ is often used when an action is defined on the ‘event’ + structure as a whole). + +2. The second value indicates the direction of traversal of the level + specified in the first value. The second value may be ‘up’, ‘down’, + ‘at’ or ‘any’. ‘any’ is used if the direction of traversal is not + important. ‘at’ implies that it traversed (or exactly attained) the + trigger level but it doesn’t matter if the traversal was in the up + direction or down direction. Note: If ‘up’, ‘down’ or ‘at’ are used, + the implication is that the microservices processing the events + within the service provider are maintaining state (e.g., to know that + a measurement field traversed a trigger level in an ‘up’ direction, + the microservice would have to know that the field was previously + below the trigger level). When initially implementing support for + YAML actions, a service provider may choose to use and interpret + these keywords in a simpler way to eliminate the need to handle + state. Specifically, they may choose to define and interpret all ‘up’ + guidance to mean ‘at the indicated trigger level or greater’, and + they may choose to define and interpret all ‘down’ guidance to mean + ‘at the indicated trigger level or lower’. + +3. The third value optionally names the condition that has been attained + when the triggers fires (e.g., ‘invalidLicence’ or + ‘capacityExhaustion’). Named-conditions should be expressed in camel + case with no underscores, hyphens or spaces and with the first letter + in lowercase. In the Rules section of the YAML file, named-conditions + may be used to specify events that should be generated and/or + microservices that should be invoked. If it is not important to name + a condition, then the string ‘null’ (without the quotes) must be used + as the third value. + +4. The fourth value recommends a specific microservice (e.g., ‘rebootVm’ + or ‘rebuildVnf’) supported by the Service Provider, be invoked if the + trigger is attained. Design time processing of the YAML by the + service provider can use these directives to automatically establish + policies and configure flows that need to be in place to support the + recommended runtime behavior. + +.. + + If a vendor wants to recommend an action, it can either work with the + service provider to identify and specify microservices that the + service provider support, or, the vendor may simply indicate and + recommend a generic microservice function by prefixing ‘RECO-’ in + front of the microservice name, which should be expressed in upper + camel case with no underscores, hyphens or spaces. + + A fourth value must be provided. If not needed, the string ‘null’ + (without the quotes) must be used. + +5. The fifth value indicates a specific named event (e.g., a TCA) that + should be generated if the trigger occurs. This field must be + provided as a VES eventName or, if not needed, as the string ‘null’ + (without the quotes). + +.. + + When an event is specified, a YAML registration for that eventName + should be added to the event registrations within the YAML file. + +Examples: + +- event: { action: [ any, any, null, rebootVm, null ] } + +.. + + # whenever the above event occurs, the VM should be rebooted + +- fieldname: { action: [ 80, up, null, null, tcaUpEventName ], action: + [ 60, down, overcapacity, null, null ] } + +.. + + # when the value of fieldname crosses 80 in an up direction, + tcaUpEventName + + should be published; if the fieldname crosses 60 in a down direction + an + + ‘overCapacity’ named-condition is asserted. + +AggregationRole +~~~~~~~~~~~~~~~ + +The ‘aggregationRole’ keyword is applied to a keyValuePair. + +AggregationRole may be set to one of the following: + +- counter + +- index + +- reference + +If needed, the aggergationRole setting tells the receiving event +processor how to aggregate the extensible keyValuePair data. Data +aggregation may use a combination of ‘index’ and ‘reference’ data fields +as aggregation keys while applying aggregation formulas, such as +summation or average on the ‘counter’ fields. + +Example 1: + + Interpretation of the below: If additionalMeasurements is supplied, + it must have key name1 and name1’s value should be interpreted as an + index: + +- additionalMeasurements: {presence: optional, structure: { + +.. + + keyValuePair: {presence: required, structure: { + + key: {presence: required, value: name1}, + + value: {presence: required, aggregationRole: index } + + }}, + + . . . + + }} + +Example 2: + +- Let’s say a vnf wants to send the following ‘TunnelTraffic’ fields + through a VES arrayOfNamedHashMap structure (specifically through + additionalMeasurements in the VES measurementField block): + ++-------------+-------------+-------------+-------------+-------------+ +| Tunnel Name | Tunnel Type | Total | Total | Total | +| | | Output | Output | Output | +| | | Bytes | Packets | Errors | ++=============+=============+=============+=============+=============+ +| ST6WA21CRS: | PRIMARY | 2457205 | 21505 | 0 | +| TUNNEL-TE40 | | | | | +| 018 | | | | | ++-------------+-------------+-------------+-------------+-------------+ +| ST6WA21CRS: | PRIMARY | 46677 | 220 | 0 | +| TUNNEL-TE10 | | | | | +| 29 | | | | | ++-------------+-------------+-------------+-------------+-------------+ +| ST6WA21CRS: | PRIMARY | 80346 | 577 | 0 | +| TUNNEL-TE10 | | | | | +| 28 | | | | | ++-------------+-------------+-------------+-------------+-------------+ + +- Tunnel Name is an index, Tunnel Type is reference data and the other + three columns are counters + +- The first three columns would be sent through VES as follows: + +additionalMeasurements: { presence: required, isHomogeneous: true, +array: [ + +namedHashMap: { presence: required, structure: { + +name: { presence: required, value: "TunnelTraffic" }, + +hashMap: { presence: required, array: [ + +keyValuePair: { presence: required, aggregationRole: index, structure: { + +key: { presence: required, value: TunnelName }, + +value: { presence: required } + +}}, + +keyValuePair: { presence: required, aggregationRole: reference, +structure: { + +key: { presence: required, value: TunnelType }, + +value: { presence: required } + +}}, + +keyValuePair: { presence: required, aggregationRole: counter, structure: +{ + +key: { presence: required, value: TotalOutputBytes }, + +value: { presence: required, castTo: integer } + +}} + +]} + +}} + +]} + +Array +~~~~~ + +The ‘array’ keyword indicates that the element is an array; ‘array:’ is +following by square brackets which contain the elements of the array. +Note that unlike JSON itself, the YAML registration will explicitly +declare the array elements and will not communicate them anonymously. + +Examples: + +- element: { array: [ + +.. + + firstArrayElement: { }, + + secondArrayElement: { } + + ] } + +CastTo +~~~~~~ + +The ‘castTo’ keyword is applied to ‘value’ keywords. It tells the +receiving event processor to cast the supplied value from its standard +VES datatype (typically a string) to some other datatype. If not +supplied the implication is the standard VES datatype applies. + +A value may be castTo one and only one of the following data types: + +- boolean + +- integer + +- number (note: this supports decimal values as well as integral + values) + +- string + +Example: + +- fieldname: { value: [ x, y, z ], castTo: number } # only values ‘x’, + ‘y’, or ‘z’ allowed + +.. + + # each must be cast to a number + +- additionalMeasurements: {presence: optional, structure: { + +.. + + keyValuePair: {presence: required, structure: { # if + additionalMeasurements is + + key: {presence: required, value: name1}, # supplied, it must have key + ‘name1’ + + value: {presence: required, castTo: integer} # its value must be cast + to integer + + }} + + }} + + For another example, see the second example under AggregationRole. + +Default +~~~~~~~ + +The ‘default’ keyword specifies a default field value. Note: the default +value must be within the range or enumeration of acceptable values. + +Examples: + +- fieldname: { range: [ 1, unbounded ], default: 5 } + +- fieldname: { value: [ red, white, blue ], default: blue } + +HeartbeatAction +~~~~~~~~~~~~~~~ + +The ‘heartbeatAction’ keyword is provided on the ‘event’ objectName for +heartbeat events only. It provides design time guidance to the service +provider’s heartbeat processing applications (i.e., their watchdog +timers). The syntax and semantics of the ‘heartbeatAction’ keyword are +similar to the ‘action’ keyword except the trigger is specified by the +first field only instead of the first two fields. When the +‘heartbeatAction’ keyword is indicated, the first field is an integer +indicating the number of successively missed heartbeat events. Should +that trigger occur, the remaining fields have the same order, meaning +and optionality as those described for the ‘action’ keyword. + +Examples: + +- event: { heartbeatAction: [ 3, vnfDown, RECO-rebootVnf, tcaEventName + ] } + +.. + + # whenever the above event occurs, a vnfDown condition is asserted + and the vnf should be rebooted, plus the indicated tca should be + generated. + +isHomogeneous +~~~~~~~~~~~~~ + +The isHomogeneous keyword is applied to fields containing +arrayOfNamedHashMap. It lets the receiving event processor know whether +each namedHashMap in the arrayOfNamedHashMap conveys the same data +structure or whether convey different data structures. + +isHomogeneous may be set to one of the following (note that lowercase +letters only should be used): + +- true + +- false + +Example: The second example for the AggregationRole keyword, shows how +isHomogeneous is used. In that example, the implication is that all +namedHashMapssent through additionalMeasurements would convey +TunnelTraffic data sets and thus the receiving event processor could +convert all the data within additionalMeasurements into a single table. + +On the other hand, if isHomogeneous had been set to ‘false’, that would +tell the receiving event processor that different types of data are +being conveyed through additionalMeasurements (e.g., maybe TunnelTraffic +data is sent in some namedHashMaps while QosReport data is sent in other +namedHashMaps) and the receiving event processor would have to process +it accordingly. + +key +~~~ + +The ‘key’ keyword describes a specific key as part of a key-value pair +that may be sent within a keyValuePair keyword (see ‘keyValuePair’ +keyword for more explanation and examples). + +keyValuePair +~~~~~~~~~~~~ + +The ‘keyValuePair’ keyword describes a specific key-value pair that may +be sent within a hashMap structure (i.e., a VES field with the hashMap +datatype) or a keyValuePairString structure (see the keyValuePairString +keyword for more information). + +Within keyValuePair is a single ‘key’ and a single ‘value’ keyword, each +of which may be decorated with other keywords specified in this document +(e.g., with ‘presence’, ‘range’ and other relevant keywords). + +Examples: + +- The following specifies an additionalInformation field within VES, + which is of type hashMap: + +.. + + additionalInformation: {presence: optional, structure: { + + keyValuePair: {presence: required, structure: { + + key: {presence: required, value: name1}, + + value: {presence: required} + + }}, + + keyValuePair: {presence: optional, structure: { + + key: {presence: required, value: name2}, + + value: {presence: required} + + }} + + }} + +keyValuePairString +~~~~~~~~~~~~~~~~~~ + +The ‘keyValuePairString’ keyword describes the key-value pairs to be +communicated through a string (e.g., in the VES Syslog Fields +‘syslogSData’ or ‘additionalFields’ strings). This keyword takes three +parameters: + +- the first parameter specifies the character used to delimit (i.e., to + separate) the key-value pairs. If a space is used as a delimiter, + it should be communicated within single quotes as ‘ ‘; otherwise, + the delimiter character should be provided without any quotes. + +- The second parameter specifies the characters used to separate the + keys and values. If a space is used as a separator, it should be + communicated within single quotes as ‘ ‘; otherwise, the separator + character should be provided without any quotes. + +- The third parameter is a “sub-keyword” (i.e., it is used only within + ‘keyValuePairString’) called ‘keyValuePairs: [ ]’. Within the + square brackets, a list of ‘keyValuePair’ keywords can be provided + (see the ‘keyValuePair keyword for more information). + +Examples: + +- The following specifies an additionalFields string which is stuffed + with ‘key=value’ pairs delimited by the pipe (‘|’) symbol as in + (“key1=value1|key2=value2|key3=value3…”). + +additionalFields: {presence: required, keyValuePairString: {|, =, +keyValuePairs: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: someKeyName}, + +value: {presence: required, range: [0, 100]} + +} }, + +keyValuePair: {presence: optional, structure: { + +key: {presence: required, value: someOtherKeyName}, + +value: {presence: required, value [red, white, blue]} + +} } + +] } } + +Presence +~~~~~~~~ + +The ‘presence’ keyword may be defined as ‘required’ or ‘optional’. If +not provided, the element is assumed to be ‘optional’. + +Examples + +- element: { presence: required } # element must be present + +- element: { presence: optional } # element is optional + +- element: { value: blue } # by omitting a presence definition, the + +.. + + element is assumed to be optional + +Range +~~~~~ + +The ‘range’ keyword applies to fields (i.e., simpleTypes); indicates the +value of the field is a number within a specified range of values from +low to high (inclusive of the indicated values). . ‘range:’ is followed +by two parameters in square brackets: + +- the first parameter conveys the minimum value + +- the second parameter conveys the maximum value or ‘unbounded’ + +The keyword ‘unbounded’ is supported to convey an unbounded upper limit. +Note that the range cannot override any restrictions defined in the VES +Common Event Format. + +Examples: + +- fieldname: { range: [ 1, unbounded ] } + +- fieldname: { range: [ 0, 3.14 ] } + +Structure +~~~~~~~~~ + +The ‘structure’ keyword indicates that the element is a complexType +(i.e., an object) and is followed by curly braces containing that +object. + +Example: + +- objectName: { structure: { + +element1: { }, + +element2: { }, + +anotherObject: { structure: { + +element3: { }, + +element4: { } + +} } + +} } + +Units +~~~~~ + +The ‘units’ qualifier may be applied to values provided in VES Common +Event Format extensible field structures. The ‘units’ qualifier +communicates the units (e.g., megabytes, seconds, Hz) that the value is +expressed in. Note: the ‘units’ should not contain any space characters +and should be expressed in camel casing (e.g., use ‘numberOfPorts’, not +‘number_of_ports’ nor ‘number of ports’). + +Example: + +- additionalInformation: { presence: optional, structure: { + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: pilotNumberPoolSize}, + +value: {presence: required, units: megaBytes} + +}} + +}} + +Value +~~~~~ + +The ‘value’ keyword applies to fields (i.e., simpleTypes); indicates a +single value or an enumeration of possible values. If not provided, it +is assumed the value will be determined at runtime. Note that the +declared value cannot be inconsistent with restrictions defined in the +VES Common Event Format (e.g., it cannot add an enumerated value to an +enumeration defined in the Common Event Format, but it can subset the +defined enumerations in the Common Event Format). + +Values that are strings containing spaces should always be indicated in +single quotes. + +Examples: + +- fieldname: { value: x } # the value is ‘x’ + +- fieldname: { value: [ x, y, z ] } # the value is either ‘x’, ‘y’, or + ‘z’ + +- fieldname: { presence: required } # the value will be provided at + runtime + +- fieldname: { value: ‘error state’ } # the value is the string within + the single quotes + +Complex Conditions +------------------ + +Conditions Document +~~~~~~~~~~~~~~~~~~~ + +After all events have been defined, the YAML file may provide a YAML +document delimited by ‘---‘ and ‘…’, which specifies complex conditions +defined in terms of other conditions, which were asserted in the action +qualifiers of the preceding event definitions. For example: + + --- + + # Event Registration for eventName ‘name1’ + + event: {presence: required, action: [any, any, A, null], structure: { + + # details omitted + + }} + + ... + + --- + + # Event Registration for eventName ‘name2’ + + event: {presence: required, structure: { + + commonEventHeader: {presence: required, structure: { + + # details omitted + + }} + + measurementFields: {presence: required, structure: { + +cpuUsageArray: {presence: required, array: [ + +cpuUsage: {presence: required, structure: { + +cpuIdentifier: {presence: required}, + +percentUsage: {presence: required, action: [90, up, B, null]} + +}} + +]}, + +# details omitted + + }} + + }} + + ... + + --- + + # Complex Conditions + + conditions: [ + + conditionC: { defined in terms of A and B, details omitted }, + + conditionD: { defined in terms of A, B and C details omitted } + + ] + + ... + +Conditions Syntax and Semantics +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The YAML ‘conditions’ document begins with the keyword ‘conditions’ +followed by a colon and square brackets. Each condition is then defined +within the square brackets. Commas are used to separate conditions. + +Each condition is expressed as follows: + +conditionName: *logical expression in terms of other conditions* + +Logical Expressions +~~~~~~~~~~~~~~~~~~~ + +The following logical operators are supported: + +- &&: which is a logical AND + +- \||, which is a logical OR + +In addition parentheses may be used to group expressions. + +Example logical expression: + + (A && B) \|\| (C && D) + +Where A, B, C and D are named conditions expressed earlier in the YAML +file. + +Because YAML doesn’t support the above operators, the whole expression +needs to be enclosed in double quotes. + +Example for a condition named ‘ConditionP’: + +--- + +conditions: [ + +conditionP: "B \|\| (C && D)" + +] + +... + +Alternatively, Logical ORs and ANDs can be expressed using a syntax +defined by `metacpan.org <https://metacpan.org/pod/YAML::Logic>`__ for +Perl. Using this syntax, the example above looks like this: + +--- + +conditions: [ + +conditionP: [or, [B, [and, [C, D]]]] + +] + +... + +In the above syntax, both ORs and ANDs are provided as two nested +arrays, where the outer array consists of two items: + +- The desired operator as either ‘or’ or ‘and’ + +- The inner array which consists of the conditions to be OR’d or AND’d + together + +Note1: more than two conditions may be or’d or and’d (e.g., “B \|\| C +\|\| D” or “B && C && D”) + +Note2: however expressed by YAML, parsers must be developed to make use +of the above expressions. + +Time Based Qualifiers +~~~~~~~~~~~~~~~~~~~~~ + +Time based rules may be established using a timing keyword as follows: + +--- + +conditions: [ + +PersistentB1: { + +timing: { + +condition: B, + +occurrences: 3, + +interval: 300, + +units: seconds + +} + +} + +] + +... + +This means that if condition B occurs 3 (or more) times in 300 seconds +(e.g., 5 minutes), then condition ‘PersistentB1’ has occurred. + +Array Item Qualifiers +~~~~~~~~~~~~~~~~~~~~~ + +This ‘arrayItems’ keyword defines conditions evaluated across the items +in an array. In the example below, the condition is named ‘AnyOfC’: + +--- + +conditions: [ + +AnyOfC: { + +arrayItems: { + +condition: C, + +arrayItem: measurements.cpuUsageArray.cpuUsage, + +scope: anyOf + +} + +} + +] + +... + +This means that if condition C occurs on any cpuUsage structure within +the cpuUsageArray, then the condition ‘AnyOfC’ is in effect. + +Note the dotted notation used to convey the path to the arrayItem with +respect to the encapsulating domain field block. + +Scope may have the values ‘anyOf’ or ‘allOf’ + +Mathematical Expressions +~~~~~~~~~~~~~~~~~~~~~~~~ + +Mathematical expressions evaluate to a number, using ‘(‘, ‘)’, ‘+’, ‘-‘, +‘*’, ‘/’ and variables of the form $variablePath where the variablePath +is defined with respect to the encapsulating domain field block. + +Mathematical expressions are specified as "${mathematicalExpress}". +Because YAML does not support mathematical operators, the expressions +must be enclosed within double quotes. + +--- + +conditions: [ + +PersistentB2: { + +timing: { + +condition: B, + +occurrences: 3, + +interval: "${60 \* $measurements.measurementInterval}", + +units: seconds + +} + +} + +] + +... + +This means that if condition B occurs 3 (or more) times in an interval +defined by 60 times the measurementInterval (e.g., if the +measurementInterval was expressed in seconds as 5, then this would +evaluate to 300), then condition ‘PersistentB2’ is in effect. + +Rules +----- + +Rules Document +~~~~~~~~~~~~~~ + +After all events and conditions have been defined, the YAML file may +conclude with a final YAML document delimited by ‘---‘ and ‘…’, which +defines rules based on the named ‘conditions’ asserted previously. For +example: + + --- + + # Event Registration for eventName ‘name1’ + + event: {presence: required, action: [any, any, A, null], structure: { + + # details omitted + + }} + + ... + + --- + + # Event Registration for eventName ‘name2’ + + event: {presence: required, structure: { + + commonEventHeader: {presence: required, structure: { + + # details omitted + + }} + + measurementFields: {presence: required, structure: { + +cpuUsageArray: {presence: required, array: [ + +cpuUsage: {presence: required, structure: { + +cpuIdentifier: {presence: required}, + +percentUsage: {presence: required, action: [90, up, B, null]} + +}} + +]}, + +# details omitted + + }} + + }} + + ... + + --- + + # Complex Conditions + + conditions: [ + + C: { details omitted } + + ] + + ... + + --- + + # Rules + + rules: [ + + # defined based on conditions ‘A’, ‘B’ and ‘C’ - details omitted + + ] + + ... + +Rules Syntax and Semantics +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The YAML ‘rules’ document begins with the keyword ‘rules’ followed by a +colon and square brackets. Each rule is then defined within the square +brackets (of ‘rules’). Commas are used to separate rule structure. + +Each rule structure is expressed as follows: + +rule: { + +trigger: *logical expression in terms of conditions*, + +microservices: [ *microservice1, microservice2, microservice3…* ] + +events: [e*ventName1, eventName2, eventName3…* ], + +} + +Notes: + +- All referenced eventNames should be defined within the YAML. + +- At least one microservice or event should be specified, and both + microservices and events may be specified. + +- For information about microservices, see section 3.1.1 bullet number + 4. + +Triggers +~~~~~~~~ + +Triggers may be as simple as a named condition, or they may be logical +expressions in terms of other conditions using the same syntax as used +by the complex conditions described above. For example: + +rules: [ + +ruleName1: { + +trigger: A, + +eventss: [eventName1], + +microservices: [rebootVm] + +}, + +ruleName2: { + +trigger: "B \|\| (C && D)", + +microservices: [scaleOut] + +} + +] + +Note: when microservices are defined in terms of multiple event +conditions, the designer should take care to consider whether the target +of the microservice is clear (e.g., which VNF or VM instance to perform +the action on). Future versions of this document may provide more +clarity. + +YAML Examples +============= + +An example YAML file is provided below which registers some events for a +hypothetical VNF. Note: some of the lines have been manually +wrapped/indented to make it easier to read. Please ignore the section +breaks that interrupt this single file; they were added to make it +easier to rapidly find examples of different types of events. + +Fault +----- + +--- + +# registration for Fault_vMrf_alarm003 + +# Constants: the values of domain, eventName, priority, vfstatus + +# , version, alarmCondition, eventSeverity, eventSourceType, + +# faultFieldsVersion, specificProblem, + +# Variables (to be supplied at runtime) include: eventId, +lastEpochMicrosec, + +# reportingEntityId, reportingEntityName, sequence, sourceId, +sourceName, + +# startEpochMicrosec + +event: {presence: required, action: [ any, any, alarm003, +RECO-rebuildVnf ], + +structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: fault}, + +eventName: {presence: required, value: Fault_Vmrf-Nokia_Alarm003}, + +eventId: {presence: required}, + +nfNamingCode: {value: mrfx}, + +priority: {presence: required, value: Medium}, + +reportingEntityId: {presence: required}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceId: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +faultFields: {presence: required, structure: { + +alarmCondition: {presence: required, value: alarm003}, + +eventSeverity: {presence: required, value: MAJOR}, + +eventSourceType: {presence: required, value: virtualNetworkFunction}, + +faultFieldsVersion: {presence: required, value: 3.0}, + +specificProblem: {presence: required, value: "Configuration file was +corrupt or + +not present"}, + +vfStatus: {presence: required, value: "Requesting Termination"} + +}} + +}} + +... + +--- + +# registration for clearing Fault_vMrf_alarm003Cleared + +# Constants: the values of domain, eventName, priority, + +# , version, alarmCondition, eventSeverity, eventSourceType, + +# faultFieldsVersion, specificProblem, + +# Variables (to be supplied at runtime) include: eventId, +lastEpochMicrosec, + +# reportingEntityId, reportingEntityName, sequence, sourceId, + +# sourceName, startEpochMicrosec, vfStatus + +event: {presence: required, action: [ any, any, alarm003, Clear ], +structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: fault}, + +eventName: {presence: required, value: +Fault_Vmrf-Nokia_Alarm003Cleared}, + +eventId: {presence: required}, + +nfNamingCode: {value: mrfx}, + +priority: {presence: required, value: Medium}, + +reportingEntityId: {presence: required}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceId: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +faultFields: {presence: required, structure: { + +alarmCondition: {presence: required, value: alarm003}, + +eventSeverity: {presence: required, value: NORMAL}, + +eventSourceType: {presence: required, value: virtualNetworkFunction}, + +faultFieldsVersion: {presence: required, value: 3.0}, + +specificProblem: {presence: required, value: "Valid configuration file +found"}, + +vfStatus: {presence: required, value: "Requesting Termination"} + +}} + +}} + +... + +Heartbeat +--------- + +--- + +# registration for Heartbeat_vMRF + +# Constants: the values of domain, eventName, priority, version + +# Variables (to be supplied at runtime) include: eventId, +lastEpochMicrosec, + +# reportingEntityId, reportingEntityName, sequence, sourceId, +sourceName, + +# startEpochMicrosec + +event: {presence: required, heartbeatAction: [3, vnfDown, +RECO-rebuildVnf], + +structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: heartbeat}, + +eventName: {presence: required, value: Heartbeat_Vmrf-Nokia}, + +eventId: {presence: required}, + +nfNamingCode: {value: mrfx}, + +priority: {presence: required, value: Normal}, + +reportingEntityId: {presence: required}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceId: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +heartbeatFields: {presence: optional, structure:{ + + heartbeatFieldsVersion: {presence: required, value: 2.0}, + + heartbeatInterval: {presence: required, range: [ 15, 300 ], +default: 60 } + +}} + +}} + +... + +Measurements +------------ + +To see how additionalMeasurements may be sent in a way that is easy for +service providers to process without custom logic, please see the +following keywords: aggregationRole, castTo and isHomogeneous. In +particular, see the second example under aggergationRole. + +--- + +# registration for Measurement_vMRF + +# Constants: the values of domain, eventName, priority, version, + +# measurementFieldsVersion, +additionalMeasurements.namedArrayOfFields.name, + +# Variables (to be supplied at runtime) include: eventId, +reportingEntityName, sequence, + +# sourceName, start/lastEpochMicrosec, measurementInterval, + +# concurrentSessions, requestRate, numberOfMediaPortsInUse, + +# cpuUsageArray.cpuUsage,cpuUsage.cpuIdentifier, cpuUsage.percentUsage, + +# additionalMeasurements.namedArrayOfFields.arrayOfFields, + +# vNicPerformance.receivedOctetsAccumulated, + +# vNicPerformance.transmittedOctetsAccumulated, + +# vNicPerformance.receivedTotalPacketsAccumulated, + +# vNicPerformance.transmittedTotalPacketsAccumulated, + +# vNicPerformance.vNicIdentifier, vNicPerformance.receivedOctetsDelta, + +# vNicPerformance.receivedTotalPacketsDelta, + +# vNicPerformance.transmittedOctetsDelta, + +# vNicPerformance.transmittedTotalPacketsDelta, + +# vNicPerformance.valuesAreSuspect, memoryUsageArray.memoryUsage, + +# memoryUsage.memoryConfigured, memoryUsage.vmIdentifier, + +# memoryUsage.memoryUsed, memoryUsage.memoryFree + +event: {presence: required, structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: measurement}, + +eventName: {presence: required, value: Measurement_Vmrf-Nokia}, + +eventId: {presence: required}, + +nfNamingCode: {value: mrfx}, + +priority: {presence: required, value: Normal}, + +reportingEntityId: {presence: required}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceId: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +measurementFields: {presence: required, structure: { + +measurementFieldsVersion: {presence: required, value: 3.0}, + +measurementInterval: {presence: required, range: [ 60, 3600 ], default: +300}, + +concurrentSessions: {presence: required, range: [ 0, 100000 ]}, + +requestRate: {presence: required, range: [ 0, 100000 ]}, + +numberOfMediaPortsInUse: {presence: required, range: [ 0, 100000 ]}, + +cpuUsageArray: {presence: required, array: [ + +cpuUsage: {presence: required, structure: { + +cpuIdentifier: {presence: required}, + +percentUsage: {presence: required, range: [ 0, 100 ], + +action: [80, up, CpuUsageHigh, RECO-scaleOut], + +action: [10, down, CpuUsageLow, RECO-scaleIn]} + +}} + +]}, + +memoryUsageArray: {presence: required, array: [ + +memoryUsage: {presence: required, structure: { + +memoryConfigured: {presence: required, value: 33554432}, + +memoryFree: {presence: required, range: [ 0, 33554432 ], + +action: [100, down, FreeMemLow, RECO-scaleOut], + +action: [30198989, up, FreeMemHigh, RECO-scaleIn]}, + +memoryUsed: {presence: required, range: [ 0, 33554432 ]}, + +vmIdentifier: {presence: required} + +}} + +]}, + +additionalMeasurements: {presence: required, array: [ + +namedHashMap: {presence: required, structure: { + +name: {presence: required, value: licenseUsage}, + +hashMap: {presence: required, structure: { + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: G711AudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: G729AudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: G722AudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: AMRAudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: AMRWBAudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: OpusAudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: H263VideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: H264NonHCVideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: H264HCVideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: MPEG4VideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: VP8NonHCVideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: VP8HCVideoPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: PLC}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: AEC}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: NR}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: NG}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: NLD}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: G711FaxPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: T38FaxPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: RFactor}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: T140TextPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: EVSAudioPort}, + +value: {presence: required, range: [ 0, 100000 ], + +units: numberOfPorts } + +}} + +}} + +}}, + +namedHashMap: {presence: required, structure: { + +name: {presence: required, value: mediaCoreUtilization}, + +hashMap: {presence: required, structure: { + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualAvgAudio}, + +value: {presence: required, range: [ 0, 255 ], + +action: [80, up, AudioCoreUsageHigh, RECO-scaleOut], + +action: [10, down, AudioCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelAvgAudio}, + +value: {presence: required, range: [ 0, 100 ], + +action: [80, up, AudioCoreUsageHigh, RECO-scaleOut], + +action: [10, down, AudioCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualMaxAudio}, + +value: {presence: required, range: [ 0, 255 ]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelMaxAudio}, + +value: {presence: required, range: [ 0, 100 ]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualAvgVideo}, + +value: {presence: required, range: [ 0, 255 ], + +action: [80, up, VideoCoreUsageHigh, RECO-scaleOut], + +action: [10, down, VideoCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelAvgVideo}, + +value: {presence: required, range: [ 0, 100 ], + +action: [80, up, VideoCoreUsageHigh, RECO-scaleOut], + +action: [10, down, VideoCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualMaxVideo}, + +value: {presence: required, range: [ 0, 255 ]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelMaxVideo}, + +value: {presence: required, range: [ 0, 100 ]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualAvgHcVideo}, + +value: {presence: required, range: [ 0, 255 ], + +action: [80, up, HcVideoCoreUsageHigh, RECO-scaleOut], + +action: [10, down, HcVideoCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelAvgHcVideo}, + +value: {presence: required, range: [ 0, 100 ], + +action: [80, up, HcVideoCoreUsageHigh, RECO-scaleOut], + +action: [10, down, HcVideoCoreUsageLow, RECO-scaleIn]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: actualMaxHcVideo}, + +value: {presence: required, range: [ 0, 255 ]} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: modelMaxHcVideo}, + +value: {presence: required, range: [ 0, 100 ]} + +}} + +}} + +}} + +]}, + +vNicPerformanceArray: {presence: required, array: [ + +vNicPerformance: {presence: required, structure: { + +receivedOctetsAccumulated: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +receivedTotalPacketsAccumulated: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +receivedOctetsDelta: {presence: required}, + +range: [ 0, 18446744073709551615 ], + +receivedTotalPacketsDelta: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +transmittedOctetsDelta: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +transmittedOctetsAccumulated: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +transmittedTotalPacketsAccumulated: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +transmittedTotalPacketsDelta: {presence: required, + +range: [ 0, 18446744073709551615 ]}, + +valuesAreSuspect: {presence: required, value: [ true, false ]}, + +vNicIdentifier: {presence: required} + +}} + +]} + +}} + +}} + +... + +Mobile Flow +----------- + +--- + +# registration for mobileFlow + +# Constants: the values of domain, eventName, priority, version + +# + +# Variables (to be supplied at runtime) include: eventId, +reportingEntityName, + +# sequence, sourceName, start/lastEpochMicrosec + +# + +event: {presence: required, structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: mobileFlow}, + +eventName: {presence: required, value: MobileFlow_Vxyz-Vendor}, + +eventId: {presence: required}, + +nfType: {presence: required, value: sbcx}, + +priority: {presence: required, value: Normal}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +mobileFlowFields: {presence: required, structure: { + +mobileFlowFieldsVersion: {presence: required, value: 3.0}, + +applicationType: {presence: optional}, + +appProtocolType: {presence: optional}, + +appProtocolVersion: {presence: optional}, + +cid: {presence: optional}, + +connectionType: {presence: optional}, + +ecgi: {presence: optional}, + +flowDirection: {presence: required}, + +gtpPerFlowMetrics: {presence: required, structure: { + +avgBitErrorRate: {presence: required}, + +avgPacketDelayVariation: {presence: required}, + +avgPacketLatency: {presence: required}, + +avgReceiveThroughput: {presence: required}, + +avgTransmitThroughput: {presence: required}, + +durConnectionFailedStatus: {presence: optional}, + +durTunnelFailedStatus: {presence: optional}, + +flowActivatedBy: {presence: optional}, + +flowActivationEpoch: {presence: required}, + +flowActivationMicrosec: {presence: required}, + +flowActivationTime: {presence: optional}, + +flowDeactivatedBy: {presence: optional}, + +flowDeactivationEpoch: {presence: required}, + +flowDeactivationMicrosec: {presence: required}, + +flowDeactivationTime: {presence: required}, + +flowStatus: {presence: required}, + +gtpConnectionStatus: {presence: optional}, + +gtpTunnelStatus: {presence: optional}, + +ipTosCountList: {presence: optional}, + +ipTosList: {presence: optional}, + +largePacketRtt: {presence: optional}, + +largePacketThreshold: {presence: optional}, + +maxPacketDelayVariation: {presence: required}, + +maxReceiveBitRate: {presence: optional}, + +maxTransmitBitRate: {presence: optional}, + +mobileQciCosCountList: {presence: optional}, + +mobileQciCosList: {presence: optional}, + +numActivationFailures: {presence: required}, + +numBitErrors: {presence: required}, + +numBytesReceived: {presence: required}, + +numBytesTransmitted: {presence: required}, + +numDroppedPackets: {presence: required}, + +numGtpEchoFailures: {presence: optional}, + +numGtpTunnelErrors: {presence: optional}, + +numHttpErrors: {presence: optional}, + +numL7BytesReceived: {presence: required}, + +numL7BytesTransmitted: {presence: required}, + +numLostPackets: {presence: required}, + +numOutOfOrderPackets: {presence: required}, + +numPacketErrors: {presence: required}, + +numPacketsReceivedExclRetrans: {presence: required}, + +numPacketsReceivedInclRetrans: {presence: required}, + +numPacketsTransmittedInclRetrans: {presence: required}, + +numRetries: {presence: required}, + +numTimeouts: {presence: required}, + +numTunneledL7BytesReceived: {presence: required}, + +roundTripTime: {presence: required}, + +tcpFlagCountList: {presence: optional}, + +tcpFlagList: {presence: optional}, + +timeToFirstByte: {presence: required} + +}}, + +gtpProtocolType: {presence: optional}, + +gtpVersion: {presence: optional}, + +httpHeader: {presence: optional}, + +imei: {presence: optional}, + +imsi: {presence: optional}, + +ipProtocolType: {presence: required}, + +ipVersion: {presence: required}, + +lac: {presence: optional}, + +mcc: {presence: optional}, + +mnc: {presence: optional}, + +msisdn: {presence: optional}, + +otherEndpointIpAddress: {presence: required}, + +otherEndpointPort: {presence: required}, + +otherFunctionalRole: {presence: optional}, + +rac: {presence: optional}, + +radioAccessTechnology: {presence: optional}, + +reportingEndpointIpAddr: {presence: required}, + +reportingEndpointPort: {presence: required}, + +sac: {presence: optional}, + +samplingAlgorithm: {presence: optional}, + +tac: {presence: optional}, + +tunnelId: {presence: optional}, + +vlanId: {presence: optional}, + +additionalInformation: {presence: optional, array: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: name1}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: optional, structure: { + +key: {presence: required, value: name2}, + +value: {presence: required} + +}} + +]} + +}} + +}} + +... + +Sip Signaling +------------- + +--- + +# registration for sipSignaling + +# Constants: the values of domain, eventName, priority, version + +# + +# Variables (to be supplied at runtime) include: eventId, +reportingEntityName, + +# sequence, sourceName, start/lastEpochMicrosec + +# + +event: {presence: required, structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: sipSignaling}, + +eventName: {presence: required, value: SipSignaling_Vxyz-Vendor}, + +eventId: {presence: required}, + +nfType: {presence: required, value: sbcx}, + +priority: {presence: required, value: Normal}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +sipSignalingFields: {presence: required, structure: { + +compressedSIP: {presence: optional}, + +correlator: {presence: required}, + +localIpAaddress: {presence: required}, + +localPort: {presence: required}, + +remoteIpAddress: {presence: required}, + +remotePort: {presence: required}, + +sipSignalingFieldsVersion: {presence: required, value: 2.0}, + +summarySip: {presence: optional}, + +vnfVendorNameFields: {presence: required, structure: { + +vendorName: {presence: required}, + +vfModuleName: {presence: optional}, + +vnfName: {presence: optional} + +}}, + +additionalInformation: {presence: optional, array: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: name1}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: optional, structure: { + +key: {presence: required, value: name2}, + +value: {presence: required} + +}} + +]} + +}} + +}} + +... + +Syslog +------ + +--- + +# registration for Syslog_vMRF + +# Constants: the values of domain, eventName, priority, +lastEpochMicrosec, version, + +# syslogFields.syslogFieldsVersion, syslogFields.syslogTag + +# Variables include: eventId, lastEpochMicrosec, reportingEntityId, +reportingEntityName, + +# sequence, sourceId, sourceName, startEpochMicrosec, + +# syslogFields.eventSourceHost, syslogFields.eventSourceType, + +# syslogFields.syslogFacility, syslogFields.syslogMsg + +event: {presence: required, structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: syslog}, + +eventName: {presence: required, value: Syslog_Vmrf-Nokia}, + +eventId: {presence: required}, + +nfNamingCode: {value: mrfx}, + +priority: {presence: required, value: Normal}, + +reportingEntityId: {presence: required}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceId: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0}, + +}}, + +syslogFields: {presence: required, structure: { + +eventSourceHost: {presence: required}, + +eventSourceType: {presence: required, value: virtualNetworkFunction}, + +syslogFacility: {presence: required, range: [16, 23]}, + +syslogSev: {presence: required, value: [Emergency, Alert, Critical, +Error]}, + +syslogFieldsVersion: {presence: required, value: 3.0}, + +syslogMsg: {presence: required}, + +syslogSData: {presence: required, keyValuePairString: {‘ ‘, =, +keyValuePairs: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: ATTEST}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: DATE_IN}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: DATE_OUT}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: DEST_IN}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: FUNCTION}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: ICID}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: ORIGID}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: ORIG_TN}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: SIP_REASON_HEADER}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: STATE}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: STATUS}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: VERSTAT}, + +value: {presence: required} + +}} + +]}} }] + +syslogTag: {presence: required, value: vMRF}, + +additionalFields: {presence: required, keyValuePairString: {|, =, +keyValuePairs: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: someKeyName}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: optional, structure: { + +key: {presence: required, value: someOtherKeyName}, + +value: {presence: required} + +}} + +]}} + +}} + +}} + +... + +Voice Quality +------------- + +--- + +# registration for voiceQuality + +# Constants: the values of domain, eventName, priority, version + +# + +# Variables (to be supplied at runtime) include: eventId, +lastEpochMicrosec, + +# reportingEntityId, reportingEntityName, sequence, sourceId, + +# sourceName, startEpochMicrosec + +event: {presence: required, structure: { + +commonEventHeader: {presence: required, structure: { + +domain: {presence: required, value: voiceQualityFields}, + +eventName: {presence: required, value: VoiceQuality_Vxyz-Vendor}, + +eventId: {presence: required}, + +nfType: {presence: required, value: sbcx}, + +priority: {presence: required, value: Normal}, + +reportingEntityName: {presence: required}, + +sequence: {presence: required}, + +sourceName: {presence: required}, + +startEpochMicrosec: {presence: required}, + +lastEpochMicrosec: {presence: required}, + +timeZoneOffset: {presence: required}, + +version: {presence: required, value: 3.0} + +}}, + +voiceQualityFields: {presence: required, structure: { + +voiceQualityFieldsVersion: {presence: required, value: 2.0}, + +calleeSideCodec: {presence: required}, + +callerSideCodec: {presence: required}, + +correlator: {presence: required}, + +remoteIpAddress: {presence: required}, + +endOfCallVqmSummaries: {presence: required, structure: { + +adjacencyName: {presence: required}, + +endpointDescription: {presence: required}, + +endpointAverageJitter: {presence: optional}, + +endpointMaxJitter: {presence: optional}, + +endpointRtpOctetsLost: {presence: optional}, + +endpointRtpPacketsLost: {presence: optional}, + +endpointRtpOctetsDiscarded: {presence: optional}, + +endpointRtpOctetsReceived: {presence: optional}, + +endpointRtpOctetsSent: {presence: optional}, + +endpointRtpPacketsDiscarded: {presence: optional}, + +endpointRtpPacketsReceived: {presence: optional}, + +endpointRtpPacketsSent: {presence: optional}, + +localAverageJitter: {presence: optional}, + +localMaxJitter: {presence: optional}, + +localAverageJitterBufferDelay: {presence: optional}, + +localMaxJitterBufferDelay: {presence: optional}, + +localRtpOctetsDiscarded: {presence: optional}, + +localRtpOctetsLost: {presence: optional}, + +localRtpOctetsReceived: {presence: optional}, + +localRtpOctetsSent: {presence: optional}, + +localRtpPacketsDiscarded: {presence: optional}, + +localRtpPacketsLost: {presence: optional}, + +localRtpPacketsReceived: {presence: optional}, + +localRtpPacketsSent: {presence: optional}, + +mosCqe: {presence: optional}, + +oneWayDelay: {presence: optional}, + +packetLossPercent: {presence: optional}, + +rFactor: {presence: optional}, + +roundTripDelay: {presence: optional} + +}}, + +phoneNumber: {presence: required}, + +midCallRtcp: {presence: required}, + +vendorVnfNameFields: {presence: required, structure: { + +vendorName: {presence: required}, + +vfModuleName: {presence: optional}, + +vnfName: {presence: optional} + +}}, + +additionalInformation: {presence: optional, array: [ + +keyValuePair: {presence: required, structure: { + +key: {presence: required, value: name1}, + +value: {presence: required} + +}}, + +keyValuePair: {presence: optional, structure: { + +key: {presence: required, value: name2}, + +value: {presence: required} + +}} + +]} + +}} + +}} + +... + +.. _rules-1: + +Rules +----- + +--- + +#Rules + +Rules: [ + +ruleName1: { + +trigger: "CpuUsageHigh \|\| FreeMemLow \|\| AudioCoreUsageHigh \|\| + +VideoCoreUsageHigh \|\| HcVideoCoreUsageHigh", + +microservices: [scaleOut] + +}, + +ruleName2: { + +trigger: "CpuUsageLow && FreeMemHigh && AudioCoreUsageLow && + +VideoCoreUsageLow && HcVideoCoreUsageLow", + +microservices: [scaleIn] + +} + +] + +... + +Appendix: Historical Change Log +=============================== + +For the latest changes, see the Change Block just before the Table of +Contents. + ++-----------------------+-----------------------+-----------------------+ +| Date | Revision | Description | ++-----------------------+-----------------------+-----------------------+ +| 3/15/2017 | 1.0 | This is the initial | +| | | release of the VES | +| | | Event Registration | +| | | document. | ++-----------------------+-----------------------+-----------------------+ +| 3/22/2017 | 1.1 | - Changed the | +| | | ‘alert’ | +| | | qualifier to | +| | | ‘action’ and | +| | | added support | +| | | for conditions | +| | | that will | +| | | trigger rules. | +| | | | +| | | - Formatted the | +| | | document with | +| | | more sections | +| | | and | +| | | subsections. | +| | | | +| | | - Defined the syntax | +| | | and semantics | +| | | for condition | +| | | based rules. | +| | | | +| | | - Fixed the YAML | +| | | examples. | ++-----------------------+-----------------------+-----------------------+ +| 3/27/2017 | 1.2 | - Clarified the | +| | | audience of the | +| | | document and | +| | | the | +| | | expectations | +| | | for vendors. | +| | | | +| | | - Changed the order | +| | | of fields in | +| | | the action | +| | | keyword. | +| | | | +| | | - Updated the YAML | +| | | examples. | +| | | | +| | | - Wordsmithed | +| | | throughout. | ++-----------------------+-----------------------+-----------------------+ +| 3/31/2017 | 1.3 | - Generalized the | +| | | descriptions | +| | | from an ASDC, | +| | | ECOMP and | +| | | AT&T-specific | +| | | interaction | +| | | with a VNF | +| | | vendor, to a | +| | | generic Service | +| | | Provider | +| | | interaction | +| | | with a VNF | +| | | vendor. | +| | | | +| | | - Wordsmithed | +| | | throughout. | +| | | | +| | | - Added a ‘default’ | +| | | qualifier | +| | | | +| | | - Fixed syntax and | +| | | semantic | +| | | inconsistencies | +| | | in the Rules | +| | | section | +| | | | +| | | - Brought all | +| | | examples into | +| | | compliance with | +| | | v5.0 | +| | | | +| | | - Added a heartbeat | +| | | example | +| | | | +| | | - Modified the | +| | | measurement | +| | | example | +| | | | +| | | - Modified the | +| | | syslog example | +| | | | +| | | - Added two complex | +| | | rules | ++-----------------------+-----------------------+-----------------------+ +| 4/14/2017 | 1.4 | - Wordsmithed | +| | | throughout | +| | | | +| | | - Action keyword: | +| | | clarified use | +| | | of ‘up’, ‘down’ | +| | | and ‘at’ | +| | | triggers; | +| | | clarified the | +| | | specification | +| | | and use of | +| | | microservices | +| | | directives at | +| | | design time and | +| | | runtime, | +| | | clarified the | +| | | use of tca’s | +| | | | +| | | - HeartbeatAction | +| | | keyword: Added | +| | | the | +| | | heartbeatAction | +| | | keyword | +| | | | +| | | - Value keyword: | +| | | clarified the | +| | | communicaton of | +| | | strings | +| | | containing | +| | | spaces. | +| | | | +| | | - Rules: corrected | +| | | the use of | +| | | quotes in | +| | | examples | +| | | | +| | | - Examples: added | +| | | the | +| | | heartbeatAction | +| | | keyword on the | +| | | heartbeat event | +| | | example; also | +| | | corrected use | +| | | of quotes | +| | | throughout. | ++-----------------------+-----------------------+-----------------------+ +| 10/3/2017 | 1.5 | - Back of Cover | +| | | Page: updated the | +| | | license and | +| | | copyright notice | +| | | to comply with | +| | | ONAP guidelines | +| | | | +| | | - Section 3.1: Added | +| | | a ‘Units’ | +| | | qualifier | +| | | | +| | | - Examples: updated | +| | | the examples to | +| | | align with VES | +| | | 5.4.1 | ++-----------------------+-----------------------+-----------------------+ +| 10/31/2017 | 1.6 | - Added | +| | | KeyValuePairString | +| | | keyword to handle | +| | | strings which have | +| | | delimited | +| | | key-value pairs | +| | | within them. | +| | | | +| | | - Updated the syslog | +| | | example to show | +| | | the use of | +| | | KeyValuePairStr | +| | | ing | +| | | | +| | | - Updated the syslog | +| | | example to | +| | | align syslogSev | +| | | with VES 5.4.1 | +| | | | +| | | - Added examples for | +| | | mobile flow, | +| | | sip signaling | +| | | and voice | +| | | quality | +| | | | +| | | - Added sections | +| | | within the | +| | | examples to | +| | | facilitate | +| | | rapid access to | +| | | specific types | +| | | of example | +| | | events | +| | | | +| | | - Wordsmithed the | +| | | Introduction | ++-----------------------+-----------------------+-----------------------+ |