14 files changed, 0 insertions, 1046 deletions
diff --git a/sli/common/src/test/resources/EvcActivateSvcLogic_v100.xml b/sli/common/src/test/resources/EvcActivateSvcLogic_v100.xml
deleted file mode 100644
index 097078a..0000000
--- a/sli/common/src/test/resources/EvcActivateSvcLogic_v100.xml
+++ /dev/null
@@ -1,70 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
-    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd"
-    module="ase" version="1.0.0">
-
-
-    <method rpc="ase-evc-activation" mode="sync">
-        <configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor"
-            key="$evc-name" activate="true">
-            <parameter name="circuit.name" value="$evc-name" />
-            <parameter name="topology" value="$topology" />
-            <parameter name="leg1.uniCircuitId" value="$evc-leg[0].evc-access-name" />
-            <parameter name="leg2.uniCircuitId" value="$evc-leg[1].evc-access-name" />
-            <outcome value="success">
-                <return status="success" />
-            </outcome>
-            <outcome value="already-active">
-                <return status="failure">
-                    <parameter name="error-code" value="1590" />
-                    <parameter name="error-message" value="`Circuit already active`" />
-                </return>
-            </outcome>
-            <outcome value="Other">
-                <return status="failure">
-                    <parameter name="error-code" value="1542" />
-                    <parameter name="error-message" value="Activation failure" />
-                </return>
-            </outcome>
-        </configure>
-    </method>
-
-    <method rpc="ase-evc-disconnect-request" mode="sync">
-        <configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor"
-            key="$evc-name" activate="false">
-            <outcome value="success">
-                <return status="success" />
-            </outcome>
-
-            <outcome value="Other">
-                <return status="failure">
-                    <parameter name="error-code" value="1542" />
-                    <parameter name="error-message" value="De-activation failure" />
-                </return>
-            </outcome>
-        </configure>
-    </method>
-
-
-</service-logic>
diff --git a/sli/common/src/test/resources/EvcPortSvcLogic_v100.xml b/sli/common/src/test/resources/EvcPortSvcLogic_v100.xml
deleted file mode 100644
index 0808442..0000000
--- a/sli/common/src/test/resources/EvcPortSvcLogic_v100.xml
+++ /dev/null
@@ -1,263 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
-    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd"
-    module="ase" version="1.0.0">
-
-    <!-- Reserve a port. Returns uni-circuit-id of reserved ase-port -->
-    <method rpc="ase-port-reserve" mode="sync">
-        <switch test="$uni-cir-units">
-            <outcome value="Mbps">
-                <reserve plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-                    resource="ase-port"
-                    key="resource-emt-clli == $edge-device-clli and speed >= $uni-cir-value"
-                    pfx="asePort">
-
-
-                    <outcome value="success">
-                        <block>
-                            <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
-                                <parameter name="file" value="/tmp/sample_r1.log" />
-                                <parameter name="field1" value="__TIMESTAMP__"/>
-                                <parameter name="field2" value="RESERVED"/>
-                                <parameter name="field3" value="$asePort.uni_circuit_id"/>
-                            </record>
-                            <return status="success">
-                                <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-                            </return>
-                        </block>
-
-                    </outcome>
-
-                    <outcome value="not-found">
-                        <return status="failure">
-                            <parameter name="error-code" value="1010" />
-                            <parameter name="error-message" value="No ports found that match criteria" />
-                        </return>
-                    </outcome>
-
-                    <outcome value="Other">
-                        <return status="failure">
-                            <parameter name="error-code" value="1010" />
-                            <parameter name="error-message"
-                                value="Error encountered trying to reserve port" />
-                        </return>
-                    </outcome>
-
-                </reserve>
-            </outcome>
-            <outcome value="Gbps">
-                <reserve plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-                    resource="ase-port"
-                    key="resource-emt-clli == $edge-device-clli and speed >= 1000 * $uni-cir-value"
-                    pfx="asePort">
-
-
-                    <outcome value="success">
-                        <block>
-                            <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
-                                <parameter name="file" value="/tmp/sample_r1.log" />
-                                <parameter name="field1" value="__TIMESTAMP__"/>
-                                <parameter name="field2" value="RESERVED"/>
-                                <parameter name="field3" value="$asePort.uni_circuit_id"/>
-                            </record>
-                            <return status="success">
-                                <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-                            </return>
-                        </block>
-                    </outcome>
-
-                    <outcome value="not-found">
-                        <return status="failure">
-                            <parameter name="error-code" value="1010" />
-                            <parameter name="error-message" value="No ports found that match criteria" />
-                        </return>
-                    </outcome>
-                    <outcome value="">
-                        <return status="failure">
-                            <parameter name="error-code" value="1012" />
-                            <parameter name="error-message"
-                                value="Error encountered trying to reserve port" />
-                        </return>
-                    </outcome>
-                    <outcome value="Other">
-                        <return status="failure">
-                            <parameter name="error-code" value="1010" />
-                            <parameter name="error-message"
-                                value="Error encountered trying to reserve port" />
-                        </return>
-                    </outcome>
-                </reserve>
-            </outcome>
-        </switch>
-    </method>
-
-    <!-- One step provisioning/activation command. Allocates a local resource,
-        then configures it on device -->
-    <method rpc="ase-port-activate-request" mode="sync">
-
-        <allocate plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-            resource="ase-port" key="uni-circuit-id == $uni-circuit-id" pfx="asePort">
-
-            <outcome value="success">
-                <configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor"
-                    key="$uni-circuit-id" activate="true">
-                    <parameter name="circuit.id" value="$uni-circuit-id" />
-                    <parameter name="subscriber.name" value="$subscriber-name" />
-                    <parameter name="emt.clli" value="$edge-device-clli" />
-                    <parameter name="port.tagging" value="$port-tagging" />
-                    <parameter name="port.mediaSpeed" value="$media-speed" />
-                    <parameter name="location.state" value="$uni-location-state" />
-                    <parameter name="location.city" value="$uni-location-city" />
-                    <parameter name="cosCategory" value="$cos-category" />
-                    <parameter name="gosProfile" value="$gos-profile" />
-                    <parameter name="lldp" value="$asePort.resource-lldp" />
-                    <parameter name="mtu" value="$asePort.resource-mtu" />
-                    <outcome value="success">
-                        <block>
-                            <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
-                                <parameter name="file" value="/tmp/sample_r1.log" />
-                                <parameter name="field1" value="__TIMESTAMP__"/>
-                                <parameter name="field2" value="ACTIVE"/>
-                                <parameter name="field3" value="$uni-circuit-id"/>
-                            </record>
-                            <return status="success">
-                                <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" />
-                            </return>
-                        </block>
-
-                    </outcome>
-                    <outcome value="already-active">
-                        <return status="failure">
-                            <parameter name="error-code" value="1590" />
-                            <parameter name="error-message" value="Port already active" />
-                        </return>
-                    </outcome>
-                    <outcome value="Other">
-                        <return status="failure">
-                            <parameter name="error-code" value="1542" />
-                            <parameter name="error-message" value="Activation failure" />
-                        </return>
-                    </outcome>
-                </configure>
-            </outcome>
-
-            <outcome value="not-found">
-
-                <return status="failure">
-                    <parameter name="error-code" value="1220" />
-                    <parameter name="error-message" value="Circuit not found" />
-                </return>
-
-            </outcome>
-
-            <outcome value="Other">
-                <return status="failure">
-                    <parameter name="error-code" value="1230" />
-                    <parameter name="error-message" value="Error occurred trying to find circuit" />
-                </return>
-            </outcome>
-        </allocate>
-    </method>
-
-
-
-    <!-- Change provisioning w/o activation -->
-    <method rpc="ase-change-port-prov-request" mode="sync">
-        <allocate plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-            resource="ase-port" key="uni-circuit-id == $uni-circuit-id" pfx="asePort">
-
-            <outcome value="success">
-                <return status="success">
-                    <parameter name="edge-device-clli" value="$asePort.resource-emt-clli" />
-                </return>
-            </outcome>
-
-            <outcome value="not-found">
-                <return status="failure">
-                    <parameter name="error-code" value="1220" />
-                    <parameter name="error-message" value="Circuit not found" />
-                </return>
-            </outcome>
-
-            <outcome value="Other">
-                <return status="failure">
-                    <parameter name="error-code" value="1230" />
-                    <parameter name="error-message" value="Error occurred trying to find circuit" />
-                </return>
-            </outcome>
-        </allocate>
-    </method>
-
-
-
-
-    <!-- Release port -->
-
-    <method rpc="ase-release-port-request" mode="sync">
-        <exists plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-            resource="ase-evc" key="uni-circuit-id  == $uni-circuit-id">
-
-            <outcome value="true">
-                <return status="failure">
-                    <parameter name="error-code" value="1130" />
-                    <parameter name="error-message"
-                        value="Cannot release port - used in existing EVC" />
-                </return>
-            </outcome>
-            <outcome value="false">
-                <release plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-                    resource="ase-port" key="uni-circuit-id == $uni-circuit-id">
-                    <outcome value="success">
-                        <block>
-                            <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
-                                <parameter name="file" value="/tmp/sample_r1.log" />
-                                <parameter name="field1" value="__TIMESTAMP__"/>
-                                <parameter name="field2" value="RELEASED"/>
-                                <parameter name="field3" value="$uni-circuit-id"/>
-                            </record>
-                            <return status="success"/>
-                        </block>
-                    </outcome>
-
-                    <outcome value="not-found">
-                        <return status="failure">
-                            <parameter name="error-code" value="1110" />
-                            <parameter name="error-message" value="No port found for this uni-circuit-id" />
-                        </return>
-                    </outcome>
-
-                    <outcome value="Other">
-                        <return status="failure">
-                            <parameter name="error-code" value="1130" />
-                            <parameter name="error-message"
-                                value="Error encountered trying to release port" />
-                        </return>
-                    </outcome>
-                </release>
-            </outcome>
-        </exists>
-    </method>
-
-</service-logic>
-
diff --git a/sli/common/src/test/resources/ReleasePortSvcLogic_v101.xml b/sli/common/src/test/resources/ReleasePortSvcLogic_v101.xml
deleted file mode 100644
index 5a835b7..0000000
--- a/sli/common/src/test/resources/ReleasePortSvcLogic_v101.xml
+++ /dev/null
@@ -1,89 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
-    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd"
-    module="ase" version="1.0.1">
-
-    <!-- Updated release port logic : deactivate the released port on the EMT -->
-    <method rpc="ase-release-port-request" mode="sync">
-        <exists plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-            resource="ase-evc" key="uni-circuit-id  == $uni-circuit-id">
-
-            <outcome value="true">
-                <return status="failure">
-                    <parameter name="error-code" value="1130" />
-                    <parameter name="error-message"
-                        value="Cannot release port - used in existing EVC" />
-                </return>
-            </outcome>
-            <outcome value="false">
-                <release plugin="org.openecomp.sdnc.sli.resource.sample.SampleResource"
-                    resource="ase-port" key="uni-circuit-id == $uni-circuit-id">
-                    <outcome value="success">
-                        <configure adaptor="org.openecomp.sdnc.sli.adaptor.emt.EmtAdaptor"
-                            key="$uni-circuit-id" activate="false">
-
-                            <outcome value="success">
-                                <block>
-                                    <record plugin="org.openecomp.sdnc.sli.recording.FileRecorder">
-                                        <parameter name="file" value="/tmp/sample_r1.log" />
-                                        <parameter name="field1" value="__TIMESTAMP__" />
-                                        <parameter name="field2" value="RELEASED" />
-                                        <parameter name="field3" value="$uni-circuit-id" />
-                                    </record>
-                                    <return status="success">
-                                        <parameter name="uni-circuit-id" value="$asePort.uni_circuit_id" />
-                                    </return>
-                                </block>
-                            </outcome>
-                            <outcome value="Other">
-                                <return status="failure">
-                                    <parameter name="error-code" value="1130" />
-                                    <parameter name="error-message"
-                                        value="Error encountered trying to de-activate port" />
-                                </return>
-                            </outcome>
-                        </configure>
-                    </outcome>
-
-                    <outcome value="not-found">
-                        <return status="failure">
-                            <parameter name="error-code" value="1110" />
-                            <parameter name="error-message" value="No port found for this uni-circuit-id" />
-                        </return>
-                    </outcome>
-
-                    <outcome value="Other">
-                        <return status="failure">
-                            <parameter name="error-code" value="1130" />
-                            <parameter name="error-message"
-                                value="Error encountered trying to release port" />
-                        </return>
-                    </outcome>
-                </release>
-            </outcome>
-        </exists>
-    </method>
-
-</service-logic>
-
diff --git a/sli/common/src/test/resources/bad_neutron_logic_v11.xml b/sli/common/src/test/resources/bad_neutron_logic_v11.xml
deleted file mode 100644
index 4e1e8d9..0000000
--- a/sli/common/src/test/resources/bad_neutron_logic_v11.xml
+++ /dev/null
@@ -1,61 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
-    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd"
-    module="neutron" version="1.0.0">
-
-    <method rpc="canCreateNetwork" mode="sync">
-        <switch test="true">
-        <return status="success">
-            <parameter name="error-code" value="200" />
-        </return>
-        </switch>
-    </method>
-
-    <method rpc="networkCreated" mode="sync">
-        <switch test="`(length($network.segment[0].provider-physical-network) >= 5) and (substr($network.segment[0].provider-physical-network,0,5) == 'dvspg')`">
-            <outcome value="true">
-                <block>
-                <set>
-                  <parameter name="vlanlist" value="`$network.segment[0].provider-segmentation-id`"/>
-                </set>
-                <for index="i" start="1" end="`$network.num-segments`">
-                  <set>
-                    <parameter name="vlanlist" value="`$vlanlist+','+$network.segment[$i].provider-segmentation-id`"/>
-                  </set>
-                </for>
-
-                <switch test="true">
-                    <return status="success"/>
-                </switch>
-                </block>
-            </outcome>
-            <outcome value="Other">
-                <return status="success">
-                    <parameter name="error-code" value="200"/>
-                </return>
-            </outcome>
-        </switch>
-    </method>
-
-</service-logic>
diff --git a/sli/common/src/test/resources/expression.tests b/sli/common/src/test/resources/expression.tests
deleted file mode 100644
index c352e9b..0000000
--- a/sli/common/src/test/resources/expression.tests
+++ /dev/null
@@ -1,19 +0,0 @@
-$uni-circuit-id
-$asePort
-length($uni-circuit-id) > 0
-$asePort.uni-circuit-id
-$uni-cir-units * 1000 * 100 / 100
-$uni-cir-units / 1000
-$uni-cir-units - 100
-$uni-cir-units + 100
-(value * 3 - $arg1 > 0) and (length($uni-circuit-id) == 0)
-'pg-'+$network.name
-$network.segment[0].provider-physical-network
-length($network_segment[0].provider-physical-network) >= 5
-substr($network_segment[0].provider-physical-network,0,5) == 'dvspg'
-length($network_segment[0].provider-physical-network) >= 5 and substr($network_segment[0].provider-physical-network,0,5) == 'dvspg'
-(length($network_segment[0].provider-physical-network) >= 5) and (substr($network_segment[0].provider-physical-network,0,5) == 'dvspg')
-4-2-2
-1+1
-1
-1+2*3-4
diff --git a/sli/common/src/test/resources/mergetest.xml b/sli/common/src/test/resources/mergetest.xml
deleted file mode 100644
index 12e083c..0000000
--- a/sli/common/src/test/resources/mergetest.xml
+++ /dev/null
@@ -1,54 +0,0 @@
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-<multicast-parameters xmlns="org.openecomp.sdnc:test">
-       <vpn-v4-multicast-enabled>Y</vpn-v4-multicast-enabled>
-       <v4-multicast>
-              <v4-pim-ssm-default-range>Y</v4-pim-ssm-default-range>
-              <v4-data-mdt>11.11.11.11</v4-data-mdt>
-              <v4-data-mdt-wildcard-mask>2.2.2.2</v4-data-mdt-wildcard-mask>
-              <max-routes-limit>100</max-routes-limit>
-              <v4-default-mdt>1.1.1.1</v4-default-mdt>
-              <v4-pim-sm-static-override>N</v4-pim-sm-static-override>
-              <v4-pim-ssm-groups>
-                     <v4-pim-ssm-group-address>4.4.4.4</v4-pim-ssm-group-address>
-              </v4-pim-ssm-groups>
-              <v4-pim-ssm-groups>
-                     <v4-pim-ssm-group-address>3.3.3.3</v4-pim-ssm-group-address>
-              </v4-pim-ssm-groups>
-              <v4-static-rp-triplet>
-                     <rp-address>8.8.8.8</rp-address>
-                     <c-groups>
-                           <c-group-address-prefix>10.10.10.10</c-group-address-prefix>
-                     </c-groups>
-                     <c-groups>
-                           <c-group-address-prefix>9.9.9.9</c-group-address-prefix>
-                     </c-groups>
-              </v4-static-rp-triplet>
-              <v4-static-rp-triplet>
-                     <rp-address>7.7.7.7</rp-address>
-                     <c-groups>
-                           <c-group-address-prefix>6.6.6.6</c-group-address-prefix>
-                     </c-groups>
-                     <c-groups>
-                           <c-group-address-prefix>5.5.5.5</c-group-address-prefix>
-                     </c-groups>
-              </v4-static-rp-triplet>
-       </v4-multicast>
-</multicast-parameters>
diff --git a/sli/common/src/test/resources/neutron_logic_v10.xml b/sli/common/src/test/resources/neutron_logic_v10.xml
deleted file mode 100644
index 9cd3312..0000000
--- a/sli/common/src/test/resources/neutron_logic_v10.xml
+++ /dev/null
@@ -1,56 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-       http://www.apache.org/licenses/LICENSE-2.0
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-
-<service-logic xmlns="http://www.openecomp.org/sdnc/svclogic"
-    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
-    xsi:schemaLocation="http://www.openecomp.org/sdnc/svclogic ./svclogic.xsd"
-    module="neutron" version="1.0.0">
-
-    <method rpc="canCreateNetwork" mode="sync">
-        <return status="success">
-            <parameter name="error-code" value="200" />
-        </return>
-    </method>
-
-    <method rpc="networkCreated" mode="sync">
-        <switch test="`(length($network.segment[0].provider-physical-network) >= 5) and (substr($network.segment[0].provider-physical-network,0,5) == 'dvspg')`">
-            <outcome value="true">
-                <block>
-                <set>
-                  <parameter name="vlanlist" value="`$network.segment[0].provider-segmentation-id`"/>
-                </set>
-                <for index="i" start="1" end="`$network.num-segments`">
-                  <set>
-                    <parameter name="vlanlist" value="`$vlanlist+','+$network.segment[$i].provider-segmentation-id`"/>
-                  </set>
-                </for>
-
-                </block>
-            </outcome>
-            <outcome value="Other">
-                <return status="success">
-                    <parameter name="error-code" value="200"/>
-                </return>
-            </outcome>
-        </switch>
-    </method>
-
-</service-logic>
diff --git a/sli/common/src/test/resources/nonsense.xml b/sli/common/src/test/resources/nonsense.xml
deleted file mode 100644
index 6122082..0000000
--- a/sli/common/src/test/resources/nonsense.xml
+++ /dev/null
@@ -1,24 +0,0 @@
-<!--
-  ============LICENSE_START=======================================================
-  openECOMP : SDN-C
-  ================================================================================
-  Copyright (C) 2017 AT&T Intellectual Property. All rights
-  						reserved.
-  ================================================================================
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-  
-       http://www.apache.org/licenses/LICENSE-2.0
-  
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-  ============LICENSE_END=========================================================
-  -->
-
-<non>
-<sense>Hello world</sense>
-</non>
diff --git a/sli/common/src/test/resources/parser-bad.tests b/sli/common/src/test/resources/parser-bad.tests
deleted file mode 100644
index 82913af..0000000
--- a/sli/common/src/test/resources/parser-bad.tests
+++ /dev/null
@@ -1,3 +0,0 @@
-bad_neutron_logic_v11.xml
-EvcActivateSvcLogic_v100.xml
-nonsense.xml
-\ No newline at end of file
diff --git a/sli/common/src/test/resources/parser-good.tests b/sli/common/src/test/resources/parser-good.tests
deleted file mode 100644
index 0654312..0000000
--- a/sli/common/src/test/resources/parser-good.tests
+++ /dev/null
@@ -1,2 +0,0 @@
-ReleasePortSvcLogic_v101.xml
-neutron_logic_v10.xml
diff --git a/sli/common/src/test/resources/simplelogger.properties b/sli/common/src/test/resources/simplelogger.properties
deleted file mode 100644
index 6f70984..0000000
--- a/sli/common/src/test/resources/simplelogger.properties
+++ /dev/null
@@ -1,24 +0,0 @@
-###
-# ============LICENSE_START=======================================================
-# openECOMP : SDN-C
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# 						reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# 
-#      http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-###
-
-org.slf4j.simpleLogger.defaultLogLevel=info
-org.slf4j.simplelogger.log.org.openecomp.sdnc.sli.SvcLogicContext=debug
-org.slf4j.simplelogger.log.SvcLogicContext=debug
diff --git a/sli/common/src/test/resources/svclogic.properties b/sli/common/src/test/resources/svclogic.properties
deleted file mode 100644
index fa33146..0000000
--- a/sli/common/src/test/resources/svclogic.properties
+++ /dev/null
@@ -1,26 +0,0 @@
-###
-# ============LICENSE_START=======================================================
-# openECOMP : SDN-C
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# 						reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# 
-#      http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-###
-
-org.openecomp.sdnc.sli.dbtype = jdbc
-org.openecomp.sdnc.sli.jdbc.url = jdbc:mysql://localhost:3306/sdnctl
-org.openecomp.sdnc.sli.jdbc.database = sdnctl
-org.openecomp.sdnc.sli.jdbc.user = sdnctl
-org.openecomp.sdnc.sli.jdbc.password = gamma
diff --git a/sli/common/src/test/resources/svclogic.sh b/sli/common/src/test/resources/svclogic.sh
deleted file mode 100644
index 09f0637..0000000
--- a/sli/common/src/test/resources/svclogic.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/bash
-
-###
-# ============LICENSE_START=======================================================
-# openECOMP : SDN-C
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# 						reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# 
-#      http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-###
-
-MYSQL_JDBC_DRIVER=${MYSQL_JDBC_DRIVER:-/home/ubuntu/mysql-connector-java-5.1.38.1.jar}
-SLI_COMMON_TARGETDIR=${SLI_COMMON_TARGETDIR:-/home/ubuntu/opendaylight/plugins}
-#SLI_COMMON_TARGETDIR=${SLI_COMMON_TARGETDIR:-/home/ubuntu/git/sdnctl/sli/common/target}
-SLI_VERSION=${SLI_VERSION:-1.1.0-SNAPSHOT}
-SLI_COMMON_JAR=${SLI_COMMON_JAR:=${SLI_COMMON_TARGETDIR}/sli-common-${SLI_VERSION}.jar}
-
-echo SLI_COMMON_JAR is $SLI_COMMON_JAR
-
-java -cp ${CLASSPATH}:${MYSQL_JDBC_DRIVER}:${SLI_COMMON_JAR} org.openecomp.sdnc.sli.SvcLogicParser $*
diff --git a/sli/common/src/test/resources/svclogic.xsd b/sli/common/src/test/resources/svclogic.xsd
deleted file mode 100644
index 0743089..0000000
--- a/sli/common/src/test/resources/svclogic.xsd
+++ /dev/null
@@ -1,323 +0,0 @@
-<?xml version = "1.0" encoding = "UTF-8"?>
-<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.openecomp.org/sdnc/svclogic" xmlns="http://www.openecomp.org/sdnc/svclogic">
-
-	<xsd:simpleType name="modeType">
-		<xsd:restriction base="xsd:string">
-			<xsd:enumeration value="sync" />
-			<xsd:enumeration value="async" />
-		</xsd:restriction>
-	</xsd:simpleType>
-
-	<xsd:group name="node">
-		<xsd:choice>
-			<xsd:element ref="block" />
-			<xsd:element ref="is-available" />
-			<xsd:element ref="exists" />
-			<xsd:element ref="reserve" />
-			<xsd:element ref="release" />
-			<xsd:element ref="allocate" />
-			<xsd:element ref="get-resource" />
-			<xsd:element ref="configure" />
-			<xsd:element ref="return" />
-			<xsd:element ref="switch" />
-			<xsd:element ref="record" />
-			<xsd:element ref="save" />
-			<xsd:element ref="for" />
-			<xsd:element ref="set" />
-			<xsd:element ref="execute" />
-			<xsd:element ref="delete" />
-			<xsd:element ref="update" />
-			<xsd:element ref="call" />
-			<xsd:element ref="notify" />
-			<xsd:element ref="break" />
-		</xsd:choice>
-	</xsd:group>
-
-	<xsd:element name="service-logic">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="method" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="module" use="required" type="xsd:string" />
-			<xsd:attribute name="version" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="method">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:group ref="node" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="rpc" use="required" type="xsd:string" />
-			<xsd:attribute name="mode" use="optional" type="modeType" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="block">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:group ref="node" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="atomic" use="optional" type="xsd:boolean" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="is-available">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="exists">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="outcome">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:group ref="node" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="ref" use="optional" type="xsd:string" />
-			<xsd:attribute name="value" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="reserve">
-		<xsd:complexType>
-			<xsd:sequence>
-				<!-- This node does not actually read from parameters -->
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<xsd:attribute name="select" use="optional" type="xsd:string" />
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="release">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="record">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="allocate">
-		<xsd:complexType>
-			<xsd:sequence>
-				<!-- This node does not actually read from parameters -->
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="required" type="xsd:string" />
-			<xsd:attribute name="pfx" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="get-resource">
-		<xsd:complexType>
-			<xsd:sequence>
-				<!-- This node does not actually read from parameters -->
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<xsd:attribute name="local-only" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="order-by" use="optional" type="xsd:string" />
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-			<!-- force is retired and does not do anything -->
-			<xsd:attribute name="force" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="configure">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="adaptor" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="required" type="xsd:string" />
-			<xsd:attribute name="activate" use="optional" type="xsd:boolean" />
-		</xsd:complexType>
-	</xsd:element>
-
-
-	<xsd:element name="parameter">
-		<xsd:complexType>
-			<xsd:attribute name="name" use="required" type="xsd:string" />
-			<xsd:attribute name="value" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-
-	<xsd:element name="return">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="status" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="switch">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="test" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="save">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<xsd:attribute name="force" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="local-only" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="delete">
-		<xsd:complexType>
-			<xsd:sequence>
-				<!-- This node does not actually read from parameters -->
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<!-- force is retired and does not do anything -->
-			<xsd:attribute name="force" use="optional" type="xsd:string" />
-			<!-- local-only is retired and does not do anything -->
-			<xsd:attribute name="local-only" use="optional" type="xsd:string" />
-			<!-- pfx is retired and does not do anything -->
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="for">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:group ref="node" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="atomic" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="index" use="required" type="xsd:string" />
-			<xsd:attribute name="start" use="required" type="xsd:string" />
-			<xsd:attribute name="end" use="required" type="xsd:string" />
-			<xsd:attribute name="silentFailure" use="optional" type="xsd:boolean" default="false" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="set">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="only-if-unset" use="optional"
-				type="xsd:boolean" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="execute">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="method" use="required" type="xsd:string" />
-			<xsd:attribute name="emitsOutcome" use="optional" type="xsd:boolean" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="update">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="required" type="xsd:string" />
-			<xsd:attribute name="resource" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<xsd:attribute name="force" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="local-only" use="optional" type="xsd:boolean" />
-			<xsd:attribute name="pfx" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="call">
-		<xsd:complexType>
-			<xsd:sequence>
-				<!-- This node does not actually read from parameters -->
-				<xsd:element ref="parameter" minOccurs="0" maxOccurs="unbounded" />
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="module" use="optional" type="xsd:string" />
-			<xsd:attribute name="rpc" use="required" type="xsd:string" />
-			<xsd:attribute name="version" use="optional" type="xsd:string" />
-			<xsd:attribute name="mode" use="required" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="notify">
-		<xsd:complexType>
-			<xsd:sequence>
-				<xsd:element ref="outcome" minOccurs="0" maxOccurs="unbounded" />
-			</xsd:sequence>
-			<xsd:attribute name="plugin" use="optional" type="xsd:string" />
-			<xsd:attribute name="resource" use="optional" type="xsd:string" />
-			<xsd:attribute name="action" use="required" type="xsd:string" />
-			<xsd:attribute name="key" use="optional" type="xsd:string" />
-			<!-- force is retired and does not do anything -->
-			<xsd:attribute name="force" use="optional" type="xsd:string" />
-		</xsd:complexType>
-	</xsd:element>
-
-	<xsd:element name="break">
-		<xsd:complexType />
-	</xsd:element>
-
-</xsd:schema>