diff options
Diffstat (limited to 'src/kube2msb/vendor')
16 files changed, 1022 insertions, 640 deletions
diff --git a/src/kube2msb/vendor/github.com/juju/ratelimit/LICENSE b/src/kube2msb/vendor/github.com/juju/ratelimit/LICENSE deleted file mode 100644 index ade9307..0000000 --- a/src/kube2msb/vendor/github.com/juju/ratelimit/LICENSE +++ /dev/null @@ -1,191 +0,0 @@ -All files in this repository are licensed as follows. If you contribute -to this repository, it is assumed that you license your contribution -under the same license unless you state otherwise. - -All files Copyright (C) 2015 Canonical Ltd. unless otherwise specified in the file. - -This software is licensed under the LGPLv3, included below. - -As a special exception to the GNU Lesser General Public License version 3 -("LGPL3"), the copyright holders of this Library give you permission to -convey to a third party a Combined Work that links statically or dynamically -to this Library without providing any Minimal Corresponding Source or -Minimal Application Code as set out in 4d or providing the installation -information set out in section 4e, provided that you comply with the other -provisions of LGPL3 and provided that you meet, for the Application the -terms and conditions of the license(s) which apply to the Application. - -Except as stated in this special exception, the provisions of LGPL3 will -continue to comply in full to this Library. If you modify this Library, you -may apply this exception to your version of this Library, but you are not -obliged to do so. If you do not wish to do so, delete this exception -statement from your version. This exception does not (and cannot) modify any -license terms which apply to the Application, with which you must still -comply. - - - GNU LESSER GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - - This version of the GNU Lesser General Public License incorporates -the terms and conditions of version 3 of the GNU General Public -License, supplemented by the additional permissions listed below. - - 0. Additional Definitions. - - As used herein, "this License" refers to version 3 of the GNU Lesser -General Public License, and the "GNU GPL" refers to version 3 of the GNU -General Public License. - - "The Library" refers to a covered work governed by this License, -other than an Application or a Combined Work as defined below. - - An "Application" is any work that makes use of an interface provided -by the Library, but which is not otherwise based on the Library. -Defining a subclass of a class defined by the Library is deemed a mode -of using an interface provided by the Library. - - A "Combined Work" is a work produced by combining or linking an -Application with the Library. The particular version of the Library -with which the Combined Work was made is also called the "Linked -Version". - - The "Minimal Corresponding Source" for a Combined Work means the -Corresponding Source for the Combined Work, excluding any source code -for portions of the Combined Work that, considered in isolation, are -based on the Application, and not on the Linked Version. - - The "Corresponding Application Code" for a Combined Work means the -object code and/or source code for the Application, including any data -and utility programs needed for reproducing the Combined Work from the -Application, but excluding the System Libraries of the Combined Work. - - 1. Exception to Section 3 of the GNU GPL. - - You may convey a covered work under sections 3 and 4 of this License -without being bound by section 3 of the GNU GPL. - - 2. Conveying Modified Versions. - - If you modify a copy of the Library, and, in your modifications, a -facility refers to a function or data to be supplied by an Application -that uses the facility (other than as an argument passed when the -facility is invoked), then you may convey a copy of the modified -version: - - a) under this License, provided that you make a good faith effort to - ensure that, in the event an Application does not supply the - function or data, the facility still operates, and performs - whatever part of its purpose remains meaningful, or - - b) under the GNU GPL, with none of the additional permissions of - this License applicable to that copy. - - 3. Object Code Incorporating Material from Library Header Files. - - The object code form of an Application may incorporate material from -a header file that is part of the Library. You may convey such object -code under terms of your choice, provided that, if the incorporated -material is not limited to numerical parameters, data structure -layouts and accessors, or small macros, inline functions and templates -(ten or fewer lines in length), you do both of the following: - - a) Give prominent notice with each copy of the object code that the - Library is used in it and that the Library and its use are - covered by this License. - - b) Accompany the object code with a copy of the GNU GPL and this license - document. - - 4. Combined Works. - - You may convey a Combined Work under terms of your choice that, -taken together, effectively do not restrict modification of the -portions of the Library contained in the Combined Work and reverse -engineering for debugging such modifications, if you also do each of -the following: - - a) Give prominent notice with each copy of the Combined Work that - the Library is used in it and that the Library and its use are - covered by this License. - - b) Accompany the Combined Work with a copy of the GNU GPL and this license - document. - - c) For a Combined Work that displays copyright notices during - execution, include the copyright notice for the Library among - these notices, as well as a reference directing the user to the - copies of the GNU GPL and this license document. - - d) Do one of the following: - - 0) Convey the Minimal Corresponding Source under the terms of this - License, and the Corresponding Application Code in a form - suitable for, and under terms that permit, the user to - recombine or relink the Application with a modified version of - the Linked Version to produce a modified Combined Work, in the - manner specified by section 6 of the GNU GPL for conveying - Corresponding Source. - - 1) Use a suitable shared library mechanism for linking with the - Library. A suitable mechanism is one that (a) uses at run time - a copy of the Library already present on the user's computer - system, and (b) will operate properly with a modified version - of the Library that is interface-compatible with the Linked - Version. - - e) Provide Installation Information, but only if you would otherwise - be required to provide such information under section 6 of the - GNU GPL, and only to the extent that such information is - necessary to install and execute a modified version of the - Combined Work produced by recombining or relinking the - Application with a modified version of the Linked Version. (If - you use option 4d0, the Installation Information must accompany - the Minimal Corresponding Source and Corresponding Application - Code. If you use option 4d1, you must provide the Installation - Information in the manner specified by section 6 of the GNU GPL - for conveying Corresponding Source.) - - 5. Combined Libraries. - - You may place library facilities that are a work based on the -Library side by side in a single library together with other library -facilities that are not Applications and are not covered by this -License, and convey such a combined library under terms of your -choice, if you do both of the following: - - a) Accompany the combined library with a copy of the same work based - on the Library, uncombined with any other library facilities, - conveyed under the terms of this License. - - b) Give prominent notice with the combined library that part of it - is a work based on the Library, and explaining where to find the - accompanying uncombined form of the same work. - - 6. Revised Versions of the GNU Lesser General Public License. - - The Free Software Foundation may publish revised and/or new versions -of the GNU Lesser General Public License from time to time. Such new -versions will be similar in spirit to the present version, but may -differ in detail to address new problems or concerns. - - Each version is given a distinguishing version number. If the -Library as you received it specifies that a certain numbered version -of the GNU Lesser General Public License "or any later version" -applies to it, you have the option of following the terms and -conditions either of that published version or of any later version -published by the Free Software Foundation. If the Library as you -received it does not specify a version number of the GNU Lesser -General Public License, you may choose any version of the GNU Lesser -General Public License ever published by the Free Software Foundation. - - If the Library as you received it specifies that a proxy can decide -whether future versions of the GNU Lesser General Public License shall -apply, that proxy's public statement of acceptance of any version is -permanent authorization for you to choose that version for the -Library. diff --git a/src/kube2msb/vendor/github.com/juju/ratelimit/README.md b/src/kube2msb/vendor/github.com/juju/ratelimit/README.md deleted file mode 100644 index a0fdfe2..0000000 --- a/src/kube2msb/vendor/github.com/juju/ratelimit/README.md +++ /dev/null @@ -1,117 +0,0 @@ -# ratelimit --- - import "github.com/juju/ratelimit" - -The ratelimit package provides an efficient token bucket implementation. See -http://en.wikipedia.org/wiki/Token_bucket. - -## Usage - -#### func Reader - -```go -func Reader(r io.Reader, bucket *Bucket) io.Reader -``` -Reader returns a reader that is rate limited by the given token bucket. Each -token in the bucket represents one byte. - -#### func Writer - -```go -func Writer(w io.Writer, bucket *Bucket) io.Writer -``` -Writer returns a writer that is rate limited by the given token bucket. Each -token in the bucket represents one byte. - -#### type Bucket - -```go -type Bucket struct { -} -``` - -Bucket represents a token bucket that fills at a predetermined rate. Methods on -Bucket may be called concurrently. - -#### func NewBucket - -```go -func NewBucket(fillInterval time.Duration, capacity int64) *Bucket -``` -NewBucket returns a new token bucket that fills at the rate of one token every -fillInterval, up to the given maximum capacity. Both arguments must be positive. -The bucket is initially full. - -#### func NewBucketWithQuantum - -```go -func NewBucketWithQuantum(fillInterval time.Duration, capacity, quantum int64) *Bucket -``` -NewBucketWithQuantum is similar to NewBucket, but allows the specification of -the quantum size - quantum tokens are added every fillInterval. - -#### func NewBucketWithRate - -```go -func NewBucketWithRate(rate float64, capacity int64) *Bucket -``` -NewBucketWithRate returns a token bucket that fills the bucket at the rate of -rate tokens per second up to the given maximum capacity. Because of limited -clock resolution, at high rates, the actual rate may be up to 1% different from -the specified rate. - -#### func (*Bucket) Rate - -```go -func (tb *Bucket) Rate() float64 -``` -Rate returns the fill rate of the bucket, in tokens per second. - -#### func (*Bucket) Take - -```go -func (tb *Bucket) Take(count int64) time.Duration -``` -Take takes count tokens from the bucket without blocking. It returns the time -that the caller should wait until the tokens are actually available. - -Note that if the request is irrevocable - there is no way to return tokens to -the bucket once this method commits us to taking them. - -#### func (*Bucket) TakeAvailable - -```go -func (tb *Bucket) TakeAvailable(count int64) int64 -``` -TakeAvailable takes up to count immediately available tokens from the bucket. It -returns the number of tokens removed, or zero if there are no available tokens. -It does not block. - -#### func (*Bucket) TakeMaxDuration - -```go -func (tb *Bucket) TakeMaxDuration(count int64, maxWait time.Duration) (time.Duration, bool) -``` -TakeMaxDuration is like Take, except that it will only take tokens from the -bucket if the wait time for the tokens is no greater than maxWait. - -If it would take longer than maxWait for the tokens to become available, it does -nothing and reports false, otherwise it returns the time that the caller should -wait until the tokens are actually available, and reports true. - -#### func (*Bucket) Wait - -```go -func (tb *Bucket) Wait(count int64) -``` -Wait takes count tokens from the bucket, waiting until they are available. - -#### func (*Bucket) WaitMaxDuration - -```go -func (tb *Bucket) WaitMaxDuration(count int64, maxWait time.Duration) bool -``` -WaitMaxDuration is like Wait except that it will only take tokens from the -bucket if it needs to wait for no greater than maxWait. It reports whether any -tokens have been removed from the bucket If no tokens have been removed, it -returns immediately. diff --git a/src/kube2msb/vendor/github.com/juju/ratelimit/ratelimit.go b/src/kube2msb/vendor/github.com/juju/ratelimit/ratelimit.go deleted file mode 100644 index 3ef32fb..0000000 --- a/src/kube2msb/vendor/github.com/juju/ratelimit/ratelimit.go +++ /dev/null @@ -1,245 +0,0 @@ -// Copyright 2014 Canonical Ltd. -// Licensed under the LGPLv3 with static-linking exception. -// See LICENCE file for details. - -// The ratelimit package provides an efficient token bucket implementation -// that can be used to limit the rate of arbitrary things. -// See http://en.wikipedia.org/wiki/Token_bucket. -package ratelimit - -import ( - "math" - "strconv" - "sync" - "time" -) - -// Bucket represents a token bucket that fills at a predetermined rate. -// Methods on Bucket may be called concurrently. -type Bucket struct { - startTime time.Time - capacity int64 - quantum int64 - fillInterval time.Duration - - // The mutex guards the fields following it. - mu sync.Mutex - - // avail holds the number of available tokens - // in the bucket, as of availTick ticks from startTime. - // It will be negative when there are consumers - // waiting for tokens. - avail int64 - availTick int64 -} - -// NewBucket returns a new token bucket that fills at the -// rate of one token every fillInterval, up to the given -// maximum capacity. Both arguments must be -// positive. The bucket is initially full. -func NewBucket(fillInterval time.Duration, capacity int64) *Bucket { - return NewBucketWithQuantum(fillInterval, capacity, 1) -} - -// rateMargin specifes the allowed variance of actual -// rate from specified rate. 1% seems reasonable. -const rateMargin = 0.01 - -// NewBucketWithRate returns a token bucket that fills the bucket -// at the rate of rate tokens per second up to the given -// maximum capacity. Because of limited clock resolution, -// at high rates, the actual rate may be up to 1% different from the -// specified rate. -func NewBucketWithRate(rate float64, capacity int64) *Bucket { - for quantum := int64(1); quantum < 1<<50; quantum = nextQuantum(quantum) { - fillInterval := time.Duration(1e9 * float64(quantum) / rate) - if fillInterval <= 0 { - continue - } - tb := NewBucketWithQuantum(fillInterval, capacity, quantum) - if diff := math.Abs(tb.Rate() - rate); diff/rate <= rateMargin { - return tb - } - } - panic("cannot find suitable quantum for " + strconv.FormatFloat(rate, 'g', -1, 64)) -} - -// nextQuantum returns the next quantum to try after q. -// We grow the quantum exponentially, but slowly, so we -// get a good fit in the lower numbers. -func nextQuantum(q int64) int64 { - q1 := q * 11 / 10 - if q1 == q { - q1++ - } - return q1 -} - -// NewBucketWithQuantum is similar to NewBucket, but allows -// the specification of the quantum size - quantum tokens -// are added every fillInterval. -func NewBucketWithQuantum(fillInterval time.Duration, capacity, quantum int64) *Bucket { - if fillInterval <= 0 { - panic("token bucket fill interval is not > 0") - } - if capacity <= 0 { - panic("token bucket capacity is not > 0") - } - if quantum <= 0 { - panic("token bucket quantum is not > 0") - } - return &Bucket{ - startTime: time.Now(), - capacity: capacity, - quantum: quantum, - avail: capacity, - fillInterval: fillInterval, - } -} - -// Wait takes count tokens from the bucket, waiting until they are -// available. -func (tb *Bucket) Wait(count int64) { - if d := tb.Take(count); d > 0 { - time.Sleep(d) - } -} - -// WaitMaxDuration is like Wait except that it will -// only take tokens from the bucket if it needs to wait -// for no greater than maxWait. It reports whether -// any tokens have been removed from the bucket -// If no tokens have been removed, it returns immediately. -func (tb *Bucket) WaitMaxDuration(count int64, maxWait time.Duration) bool { - d, ok := tb.TakeMaxDuration(count, maxWait) - if d > 0 { - time.Sleep(d) - } - return ok -} - -const infinityDuration time.Duration = 0x7fffffffffffffff - -// Take takes count tokens from the bucket without blocking. It returns -// the time that the caller should wait until the tokens are actually -// available. -// -// Note that if the request is irrevocable - there is no way to return -// tokens to the bucket once this method commits us to taking them. -func (tb *Bucket) Take(count int64) time.Duration { - d, _ := tb.take(time.Now(), count, infinityDuration) - return d -} - -// TakeMaxDuration is like Take, except that -// it will only take tokens from the bucket if the wait -// time for the tokens is no greater than maxWait. -// -// If it would take longer than maxWait for the tokens -// to become available, it does nothing and reports false, -// otherwise it returns the time that the caller should -// wait until the tokens are actually available, and reports -// true. -func (tb *Bucket) TakeMaxDuration(count int64, maxWait time.Duration) (time.Duration, bool) { - return tb.take(time.Now(), count, maxWait) -} - -// TakeAvailable takes up to count immediately available tokens from the -// bucket. It returns the number of tokens removed, or zero if there are -// no available tokens. It does not block. -func (tb *Bucket) TakeAvailable(count int64) int64 { - return tb.takeAvailable(time.Now(), count) -} - -// takeAvailable is the internal version of TakeAvailable - it takes the -// current time as an argument to enable easy testing. -func (tb *Bucket) takeAvailable(now time.Time, count int64) int64 { - if count <= 0 { - return 0 - } - tb.mu.Lock() - defer tb.mu.Unlock() - - tb.adjust(now) - if tb.avail <= 0 { - return 0 - } - if count > tb.avail { - count = tb.avail - } - tb.avail -= count - return count -} - -// Available returns the number of available tokens. It will be negative -// when there are consumers waiting for tokens. Note that if this -// returns greater than zero, it does not guarantee that calls that take -// tokens from the buffer will succeed, as the number of available -// tokens could have changed in the meantime. This method is intended -// primarily for metrics reporting and debugging. -func (tb *Bucket) Available() int64 { - return tb.available(time.Now()) -} - -// available is the internal version of available - it takes the current time as -// an argument to enable easy testing. -func (tb *Bucket) available(now time.Time) int64 { - tb.mu.Lock() - defer tb.mu.Unlock() - tb.adjust(now) - return tb.avail -} - -// Capacity returns the capacity that the bucket was created with. -func (tb *Bucket) Capacity() int64 { - return tb.capacity -} - -// Rate returns the fill rate of the bucket, in tokens per second. -func (tb *Bucket) Rate() float64 { - return 1e9 * float64(tb.quantum) / float64(tb.fillInterval) -} - -// take is the internal version of Take - it takes the current time as -// an argument to enable easy testing. -func (tb *Bucket) take(now time.Time, count int64, maxWait time.Duration) (time.Duration, bool) { - if count <= 0 { - return 0, true - } - tb.mu.Lock() - defer tb.mu.Unlock() - - currentTick := tb.adjust(now) - avail := tb.avail - count - if avail >= 0 { - tb.avail = avail - return 0, true - } - // Round up the missing tokens to the nearest multiple - // of quantum - the tokens won't be available until - // that tick. - endTick := currentTick + (-avail+tb.quantum-1)/tb.quantum - endTime := tb.startTime.Add(time.Duration(endTick) * tb.fillInterval) - waitTime := endTime.Sub(now) - if waitTime > maxWait { - return 0, false - } - tb.avail = avail - return waitTime, true -} - -// adjust adjusts the current bucket capacity based on the current time. -// It returns the current tick. -func (tb *Bucket) adjust(now time.Time) (currentTick int64) { - currentTick = int64(now.Sub(tb.startTime) / tb.fillInterval) - - if tb.avail >= tb.capacity { - return - } - tb.avail += (currentTick - tb.availTick) * tb.quantum - if tb.avail > tb.capacity { - tb.avail = tb.capacity - } - tb.availTick = currentTick - return -} diff --git a/src/kube2msb/vendor/github.com/juju/ratelimit/reader.go b/src/kube2msb/vendor/github.com/juju/ratelimit/reader.go deleted file mode 100644 index 6403bf7..0000000 --- a/src/kube2msb/vendor/github.com/juju/ratelimit/reader.go +++ /dev/null @@ -1,51 +0,0 @@ -// Copyright 2014 Canonical Ltd. -// Licensed under the LGPLv3 with static-linking exception. -// See LICENCE file for details. - -package ratelimit - -import "io" - -type reader struct { - r io.Reader - bucket *Bucket -} - -// Reader returns a reader that is rate limited by -// the given token bucket. Each token in the bucket -// represents one byte. -func Reader(r io.Reader, bucket *Bucket) io.Reader { - return &reader{ - r: r, - bucket: bucket, - } -} - -func (r *reader) Read(buf []byte) (int, error) { - n, err := r.r.Read(buf) - if n <= 0 { - return n, err - } - r.bucket.Wait(int64(n)) - return n, err -} - -type writer struct { - w io.Writer - bucket *Bucket -} - -// Writer returns a reader that is rate limited by -// the given token bucket. Each token in the bucket -// represents one byte. -func Writer(w io.Writer, bucket *Bucket) io.Writer { - return &writer{ - w: w, - bucket: bucket, - } -} - -func (w *writer) Write(buf []byte) (int, error) { - w.bucket.Wait(int64(len(buf))) - return w.w.Write(buf) -} diff --git a/src/kube2msb/vendor/golang.org/x/time/AUTHORS b/src/kube2msb/vendor/golang.org/x/time/AUTHORS new file mode 100644 index 0000000..15167cd --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/AUTHORS @@ -0,0 +1,3 @@ +# This source code refers to The Go Authors for copyright purposes. +# The master list of authors is in the main Go distribution, +# visible at http://tip.golang.org/AUTHORS. diff --git a/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTING.md b/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTING.md new file mode 100644 index 0000000..d0485e8 --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTING.md @@ -0,0 +1,26 @@ +# Contributing to Go + +Go is an open source project. + +It is the work of hundreds of contributors. We appreciate your help! + +## Filing issues + +When [filing an issue](https://golang.org/issue/new), make sure to answer these five questions: + +1. What version of Go are you using (`go version`)? +2. What operating system and processor architecture are you using? +3. What did you do? +4. What did you expect to see? +5. What did you see instead? + +General questions should go to the [golang-nuts mailing list](https://groups.google.com/group/golang-nuts) instead of the issue tracker. +The gophers there will answer or ask you to file an issue if you've tripped over a bug. + +## Contributing code + +Please read the [Contribution Guidelines](https://golang.org/doc/contribute.html) +before sending patches. + +Unless otherwise noted, the Go source files are distributed under +the BSD-style license found in the LICENSE file. diff --git a/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTORS b/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTORS new file mode 100644 index 0000000..1c4577e --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/CONTRIBUTORS @@ -0,0 +1,3 @@ +# This source code was written by the Go contributors. +# The master list of contributors is in the main Go distribution, +# visible at http://tip.golang.org/CONTRIBUTORS. diff --git a/src/kube2msb/vendor/golang.org/x/time/LICENSE b/src/kube2msb/vendor/golang.org/x/time/LICENSE new file mode 100644 index 0000000..6a66aea --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/LICENSE @@ -0,0 +1,27 @@ +Copyright (c) 2009 The Go Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/src/kube2msb/vendor/golang.org/x/time/PATENTS b/src/kube2msb/vendor/golang.org/x/time/PATENTS new file mode 100644 index 0000000..7330990 --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/PATENTS @@ -0,0 +1,22 @@ +Additional IP Rights Grant (Patents) + +"This implementation" means the copyrightable works distributed by +Google as part of the Go project. + +Google hereby grants to You a perpetual, worldwide, non-exclusive, +no-charge, royalty-free, irrevocable (except as stated in this section) +patent license to make, have made, use, offer to sell, sell, import, +transfer and otherwise run, modify and propagate the contents of this +implementation of Go, where such license applies only to those patent +claims, both currently owned or controlled by Google and acquired in +the future, licensable by Google that are necessarily infringed by this +implementation of Go. This grant does not include claims that would be +infringed only as a consequence of further modification of this +implementation. If you or your agent or exclusive licensee institute or +order or agree to the institution of patent litigation against any +entity (including a cross-claim or counterclaim in a lawsuit) alleging +that this implementation of Go or any code incorporated within this +implementation of Go constitutes direct or contributory patent +infringement, or inducement of patent infringement, then any patent +rights granted to you under this License for this implementation of Go +shall terminate as of the date such litigation is filed. diff --git a/src/kube2msb/vendor/golang.org/x/time/rate/rate.go b/src/kube2msb/vendor/golang.org/x/time/rate/rate.go new file mode 100644 index 0000000..7228d97 --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/rate/rate.go @@ -0,0 +1,384 @@ +// Copyright 2015 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package rate provides a rate limiter. +package rate + +import ( + "fmt" + "math" + "sync" + "time" +) + +// Limit defines the maximum frequency of some events. +// Limit is represented as number of events per second. +// A zero Limit allows no events. +type Limit float64 + +// Inf is the infinite rate limit; it allows all events (even if burst is zero). +const Inf = Limit(math.MaxFloat64) + +// Every converts a minimum time interval between events to a Limit. +func Every(interval time.Duration) Limit { + if interval <= 0 { + return Inf + } + return 1 / Limit(interval.Seconds()) +} + +// A Limiter controls how frequently events are allowed to happen. +// It implements a "token bucket" of size b, initially full and refilled +// at rate r tokens per second. +// Informally, in any large enough time interval, the Limiter limits the +// rate to r tokens per second, with a maximum burst size of b events. +// As a special case, if r == Inf (the infinite rate), b is ignored. +// See https://en.wikipedia.org/wiki/Token_bucket for more about token buckets. +// +// The zero value is a valid Limiter, but it will reject all events. +// Use NewLimiter to create non-zero Limiters. +// +// Limiter has three main methods, Allow, Reserve, and Wait. +// Most callers should use Wait. +// +// Each of the three methods consumes a single token. +// They differ in their behavior when no token is available. +// If no token is available, Allow returns false. +// If no token is available, Reserve returns a reservation for a future token +// and the amount of time the caller must wait before using it. +// If no token is available, Wait blocks until one can be obtained +// or its associated context.Context is canceled. +// +// The methods AllowN, ReserveN, and WaitN consume n tokens. +type Limiter struct { + limit Limit + burst int + + mu sync.Mutex + tokens float64 + // last is the last time the limiter's tokens field was updated + last time.Time + // lastEvent is the latest time of a rate-limited event (past or future) + lastEvent time.Time +} + +// Limit returns the maximum overall event rate. +func (lim *Limiter) Limit() Limit { + lim.mu.Lock() + defer lim.mu.Unlock() + return lim.limit +} + +// Burst returns the maximum burst size. Burst is the maximum number of tokens +// that can be consumed in a single call to Allow, Reserve, or Wait, so higher +// Burst values allow more events to happen at once. +// A zero Burst allows no events, unless limit == Inf. +func (lim *Limiter) Burst() int { + return lim.burst +} + +// NewLimiter returns a new Limiter that allows events up to rate r and permits +// bursts of at most b tokens. +func NewLimiter(r Limit, b int) *Limiter { + return &Limiter{ + limit: r, + burst: b, + } +} + +// Allow is shorthand for AllowN(time.Now(), 1). +func (lim *Limiter) Allow() bool { + return lim.AllowN(time.Now(), 1) +} + +// AllowN reports whether n events may happen at time now. +// Use this method if you intend to drop / skip events that exceed the rate limit. +// Otherwise use Reserve or Wait. +func (lim *Limiter) AllowN(now time.Time, n int) bool { + return lim.reserveN(now, n, 0).ok +} + +// A Reservation holds information about events that are permitted by a Limiter to happen after a delay. +// A Reservation may be canceled, which may enable the Limiter to permit additional events. +type Reservation struct { + ok bool + lim *Limiter + tokens int + timeToAct time.Time + // This is the Limit at reservation time, it can change later. + limit Limit +} + +// OK returns whether the limiter can provide the requested number of tokens +// within the maximum wait time. If OK is false, Delay returns InfDuration, and +// Cancel does nothing. +func (r *Reservation) OK() bool { + return r.ok +} + +// Delay is shorthand for DelayFrom(time.Now()). +func (r *Reservation) Delay() time.Duration { + return r.DelayFrom(time.Now()) +} + +// InfDuration is the duration returned by Delay when a Reservation is not OK. +const InfDuration = time.Duration(1<<63 - 1) + +// DelayFrom returns the duration for which the reservation holder must wait +// before taking the reserved action. Zero duration means act immediately. +// InfDuration means the limiter cannot grant the tokens requested in this +// Reservation within the maximum wait time. +func (r *Reservation) DelayFrom(now time.Time) time.Duration { + if !r.ok { + return InfDuration + } + delay := r.timeToAct.Sub(now) + if delay < 0 { + return 0 + } + return delay +} + +// Cancel is shorthand for CancelAt(time.Now()). +func (r *Reservation) Cancel() { + r.CancelAt(time.Now()) + return +} + +// CancelAt indicates that the reservation holder will not perform the reserved action +// and reverses the effects of this Reservation on the rate limit as much as possible, +// considering that other reservations may have already been made. +func (r *Reservation) CancelAt(now time.Time) { + if !r.ok { + return + } + + r.lim.mu.Lock() + defer r.lim.mu.Unlock() + + if r.lim.limit == Inf || r.tokens == 0 || r.timeToAct.Before(now) { + return + } + + // calculate tokens to restore + // The duration between lim.lastEvent and r.timeToAct tells us how many tokens were reserved + // after r was obtained. These tokens should not be restored. + restoreTokens := float64(r.tokens) - r.limit.tokensFromDuration(r.lim.lastEvent.Sub(r.timeToAct)) + if restoreTokens <= 0 { + return + } + // advance time to now + now, _, tokens := r.lim.advance(now) + // calculate new number of tokens + tokens += restoreTokens + if burst := float64(r.lim.burst); tokens > burst { + tokens = burst + } + // update state + r.lim.last = now + r.lim.tokens = tokens + if r.timeToAct == r.lim.lastEvent { + prevEvent := r.timeToAct.Add(r.limit.durationFromTokens(float64(-r.tokens))) + if !prevEvent.Before(now) { + r.lim.lastEvent = prevEvent + } + } + + return +} + +// Reserve is shorthand for ReserveN(time.Now(), 1). +func (lim *Limiter) Reserve() *Reservation { + return lim.ReserveN(time.Now(), 1) +} + +// ReserveN returns a Reservation that indicates how long the caller must wait before n events happen. +// The Limiter takes this Reservation into account when allowing future events. +// ReserveN returns false if n exceeds the Limiter's burst size. +// Usage example: +// r := lim.ReserveN(time.Now(), 1) +// if !r.OK() { +// // Not allowed to act! Did you remember to set lim.burst to be > 0 ? +// return +// } +// time.Sleep(r.Delay()) +// Act() +// Use this method if you wish to wait and slow down in accordance with the rate limit without dropping events. +// If you need to respect a deadline or cancel the delay, use Wait instead. +// To drop or skip events exceeding rate limit, use Allow instead. +func (lim *Limiter) ReserveN(now time.Time, n int) *Reservation { + r := lim.reserveN(now, n, InfDuration) + return &r +} + +// contextContext is a temporary(?) copy of the context.Context type +// to support both Go 1.6 using golang.org/x/net/context and Go 1.7+ +// with the built-in context package. If people ever stop using Go 1.6 +// we can remove this. +type contextContext interface { + Deadline() (deadline time.Time, ok bool) + Done() <-chan struct{} + Err() error + Value(key interface{}) interface{} +} + +// Wait is shorthand for WaitN(ctx, 1). +func (lim *Limiter) wait(ctx contextContext) (err error) { + return lim.WaitN(ctx, 1) +} + +// WaitN blocks until lim permits n events to happen. +// It returns an error if n exceeds the Limiter's burst size, the Context is +// canceled, or the expected wait time exceeds the Context's Deadline. +// The burst limit is ignored if the rate limit is Inf. +func (lim *Limiter) waitN(ctx contextContext, n int) (err error) { + if n > lim.burst && lim.limit != Inf { + return fmt.Errorf("rate: Wait(n=%d) exceeds limiter's burst %d", n, lim.burst) + } + // Check if ctx is already cancelled + select { + case <-ctx.Done(): + return ctx.Err() + default: + } + // Determine wait limit + now := time.Now() + waitLimit := InfDuration + if deadline, ok := ctx.Deadline(); ok { + waitLimit = deadline.Sub(now) + } + // Reserve + r := lim.reserveN(now, n, waitLimit) + if !r.ok { + return fmt.Errorf("rate: Wait(n=%d) would exceed context deadline", n) + } + // Wait if necessary + delay := r.DelayFrom(now) + if delay == 0 { + return nil + } + t := time.NewTimer(delay) + defer t.Stop() + select { + case <-t.C: + // We can proceed. + return nil + case <-ctx.Done(): + // Context was canceled before we could proceed. Cancel the + // reservation, which may permit other events to proceed sooner. + r.Cancel() + return ctx.Err() + } +} + +// SetLimit is shorthand for SetLimitAt(time.Now(), newLimit). +func (lim *Limiter) SetLimit(newLimit Limit) { + lim.SetLimitAt(time.Now(), newLimit) +} + +// SetLimitAt sets a new Limit for the limiter. The new Limit, and Burst, may be violated +// or underutilized by those which reserved (using Reserve or Wait) but did not yet act +// before SetLimitAt was called. +func (lim *Limiter) SetLimitAt(now time.Time, newLimit Limit) { + lim.mu.Lock() + defer lim.mu.Unlock() + + now, _, tokens := lim.advance(now) + + lim.last = now + lim.tokens = tokens + lim.limit = newLimit +} + +// reserveN is a helper method for AllowN, ReserveN, and WaitN. +// maxFutureReserve specifies the maximum reservation wait duration allowed. +// reserveN returns Reservation, not *Reservation, to avoid allocation in AllowN and WaitN. +func (lim *Limiter) reserveN(now time.Time, n int, maxFutureReserve time.Duration) Reservation { + lim.mu.Lock() + + if lim.limit == Inf { + lim.mu.Unlock() + return Reservation{ + ok: true, + lim: lim, + tokens: n, + timeToAct: now, + } + } + + now, last, tokens := lim.advance(now) + + // Calculate the remaining number of tokens resulting from the request. + tokens -= float64(n) + + // Calculate the wait duration + var waitDuration time.Duration + if tokens < 0 { + waitDuration = lim.limit.durationFromTokens(-tokens) + } + + // Decide result + ok := n <= lim.burst && waitDuration <= maxFutureReserve + + // Prepare reservation + r := Reservation{ + ok: ok, + lim: lim, + limit: lim.limit, + } + if ok { + r.tokens = n + r.timeToAct = now.Add(waitDuration) + } + + // Update state + if ok { + lim.last = now + lim.tokens = tokens + lim.lastEvent = r.timeToAct + } else { + lim.last = last + } + + lim.mu.Unlock() + return r +} + +// advance calculates and returns an updated state for lim resulting from the passage of time. +// lim is not changed. +func (lim *Limiter) advance(now time.Time) (newNow time.Time, newLast time.Time, newTokens float64) { + last := lim.last + if now.Before(last) { + last = now + } + + // Avoid making delta overflow below when last is very old. + maxElapsed := lim.limit.durationFromTokens(float64(lim.burst) - lim.tokens) + elapsed := now.Sub(last) + if elapsed > maxElapsed { + elapsed = maxElapsed + } + + // Calculate the new number of tokens, due to time that passed. + delta := lim.limit.tokensFromDuration(elapsed) + tokens := lim.tokens + delta + if burst := float64(lim.burst); tokens > burst { + tokens = burst + } + + return now, last, tokens +} + +// durationFromTokens is a unit conversion function from the number of tokens to the duration +// of time it takes to accumulate them at a rate of limit tokens per second. +func (limit Limit) durationFromTokens(tokens float64) time.Duration { + seconds := tokens / float64(limit) + return time.Nanosecond * time.Duration(1e9*seconds) +} + +// tokensFromDuration is a unit conversion function from a time duration to the number of tokens +// which could be accumulated during that duration at a rate of limit tokens per second. +func (limit Limit) tokensFromDuration(d time.Duration) float64 { + return d.Seconds() * float64(limit) +} diff --git a/src/kube2msb/vendor/golang.org/x/time/rate/rate_go16.go b/src/kube2msb/vendor/golang.org/x/time/rate/rate_go16.go new file mode 100644 index 0000000..6bab185 --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/rate/rate_go16.go @@ -0,0 +1,21 @@ +// Copyright 2017 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !go1.7 + +package rate + +import "golang.org/x/net/context" + +// Wait is shorthand for WaitN(ctx, 1). +func (lim *Limiter) Wait(ctx context.Context) (err error) { + return lim.waitN(ctx, 1) +} + +// WaitN blocks until lim permits n events to happen. +// It returns an error if n exceeds the Limiter's burst size, the Context is +// canceled, or the expected wait time exceeds the Context's Deadline. +func (lim *Limiter) WaitN(ctx context.Context, n int) (err error) { + return lim.waitN(ctx, n) +} diff --git a/src/kube2msb/vendor/golang.org/x/time/rate/rate_go17.go b/src/kube2msb/vendor/golang.org/x/time/rate/rate_go17.go new file mode 100644 index 0000000..f90d85f --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/rate/rate_go17.go @@ -0,0 +1,21 @@ +// Copyright 2017 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.7 + +package rate + +import "context" + +// Wait is shorthand for WaitN(ctx, 1). +func (lim *Limiter) Wait(ctx context.Context) (err error) { + return lim.waitN(ctx, 1) +} + +// WaitN blocks until lim permits n events to happen. +// It returns an error if n exceeds the Limiter's burst size, the Context is +// canceled, or the expected wait time exceeds the Context's Deadline. +func (lim *Limiter) WaitN(ctx context.Context, n int) (err error) { + return lim.waitN(ctx, n) +} diff --git a/src/kube2msb/vendor/golang.org/x/time/rate/rate_test.go b/src/kube2msb/vendor/golang.org/x/time/rate/rate_test.go new file mode 100644 index 0000000..ec8c66d --- /dev/null +++ b/src/kube2msb/vendor/golang.org/x/time/rate/rate_test.go @@ -0,0 +1,459 @@ +// Copyright 2015 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.7 + +package rate + +import ( + "context" + "math" + "runtime" + "sync" + "sync/atomic" + "testing" + "time" +) + +func TestLimit(t *testing.T) { + if Limit(10) == Inf { + t.Errorf("Limit(10) == Inf should be false") + } +} + +func closeEnough(a, b Limit) bool { + return (math.Abs(float64(a)/float64(b)) - 1.0) < 1e-9 +} + +func TestEvery(t *testing.T) { + cases := []struct { + interval time.Duration + lim Limit + }{ + {0, Inf}, + {-1, Inf}, + {1 * time.Nanosecond, Limit(1e9)}, + {1 * time.Microsecond, Limit(1e6)}, + {1 * time.Millisecond, Limit(1e3)}, + {10 * time.Millisecond, Limit(100)}, + {100 * time.Millisecond, Limit(10)}, + {1 * time.Second, Limit(1)}, + {2 * time.Second, Limit(0.5)}, + {time.Duration(2.5 * float64(time.Second)), Limit(0.4)}, + {4 * time.Second, Limit(0.25)}, + {10 * time.Second, Limit(0.1)}, + {time.Duration(math.MaxInt64), Limit(1e9 / float64(math.MaxInt64))}, + } + for _, tc := range cases { + lim := Every(tc.interval) + if !closeEnough(lim, tc.lim) { + t.Errorf("Every(%v) = %v want %v", tc.interval, lim, tc.lim) + } + } +} + +const ( + d = 100 * time.Millisecond +) + +var ( + t0 = time.Now() + t1 = t0.Add(time.Duration(1) * d) + t2 = t0.Add(time.Duration(2) * d) + t3 = t0.Add(time.Duration(3) * d) + t4 = t0.Add(time.Duration(4) * d) + t5 = t0.Add(time.Duration(5) * d) + t9 = t0.Add(time.Duration(9) * d) +) + +type allow struct { + t time.Time + n int + ok bool +} + +func run(t *testing.T, lim *Limiter, allows []allow) { + for i, allow := range allows { + ok := lim.AllowN(allow.t, allow.n) + if ok != allow.ok { + t.Errorf("step %d: lim.AllowN(%v, %v) = %v want %v", + i, allow.t, allow.n, ok, allow.ok) + } + } +} + +func TestLimiterBurst1(t *testing.T) { + run(t, NewLimiter(10, 1), []allow{ + {t0, 1, true}, + {t0, 1, false}, + {t0, 1, false}, + {t1, 1, true}, + {t1, 1, false}, + {t1, 1, false}, + {t2, 2, false}, // burst size is 1, so n=2 always fails + {t2, 1, true}, + {t2, 1, false}, + }) +} + +func TestLimiterBurst3(t *testing.T) { + run(t, NewLimiter(10, 3), []allow{ + {t0, 2, true}, + {t0, 2, false}, + {t0, 1, true}, + {t0, 1, false}, + {t1, 4, false}, + {t2, 1, true}, + {t3, 1, true}, + {t4, 1, true}, + {t4, 1, true}, + {t4, 1, false}, + {t4, 1, false}, + {t9, 3, true}, + {t9, 0, true}, + }) +} + +func TestLimiterJumpBackwards(t *testing.T) { + run(t, NewLimiter(10, 3), []allow{ + {t1, 1, true}, // start at t1 + {t0, 1, true}, // jump back to t0, two tokens remain + {t0, 1, true}, + {t0, 1, false}, + {t0, 1, false}, + {t1, 1, true}, // got a token + {t1, 1, false}, + {t1, 1, false}, + {t2, 1, true}, // got another token + {t2, 1, false}, + {t2, 1, false}, + }) +} + +func TestSimultaneousRequests(t *testing.T) { + const ( + limit = 1 + burst = 5 + numRequests = 15 + ) + var ( + wg sync.WaitGroup + numOK = uint32(0) + ) + + // Very slow replenishing bucket. + lim := NewLimiter(limit, burst) + + // Tries to take a token, atomically updates the counter and decreases the wait + // group counter. + f := func() { + defer wg.Done() + if ok := lim.Allow(); ok { + atomic.AddUint32(&numOK, 1) + } + } + + wg.Add(numRequests) + for i := 0; i < numRequests; i++ { + go f() + } + wg.Wait() + if numOK != burst { + t.Errorf("numOK = %d, want %d", numOK, burst) + } +} + +func TestLongRunningQPS(t *testing.T) { + if testing.Short() { + t.Skip("skipping in short mode") + } + if runtime.GOOS == "openbsd" { + t.Skip("low resolution time.Sleep invalidates test (golang.org/issue/14183)") + return + } + + // The test runs for a few seconds executing many requests and then checks + // that overall number of requests is reasonable. + const ( + limit = 100 + burst = 100 + ) + var numOK = int32(0) + + lim := NewLimiter(limit, burst) + + var wg sync.WaitGroup + f := func() { + if ok := lim.Allow(); ok { + atomic.AddInt32(&numOK, 1) + } + wg.Done() + } + + start := time.Now() + end := start.Add(5 * time.Second) + for time.Now().Before(end) { + wg.Add(1) + go f() + + // This will still offer ~500 requests per second, but won't consume + // outrageous amount of CPU. + time.Sleep(2 * time.Millisecond) + } + wg.Wait() + elapsed := time.Since(start) + ideal := burst + (limit * float64(elapsed) / float64(time.Second)) + + // We should never get more requests than allowed. + if want := int32(ideal + 1); numOK > want { + t.Errorf("numOK = %d, want %d (ideal %f)", numOK, want, ideal) + } + // We should get very close to the number of requests allowed. + if want := int32(0.999 * ideal); numOK < want { + t.Errorf("numOK = %d, want %d (ideal %f)", numOK, want, ideal) + } +} + +type request struct { + t time.Time + n int + act time.Time + ok bool +} + +// dFromDuration converts a duration to a multiple of the global constant d +func dFromDuration(dur time.Duration) int { + // Adding a millisecond to be swallowed by the integer division + // because we don't care about small inaccuracies + return int((dur + time.Millisecond) / d) +} + +// dSince returns multiples of d since t0 +func dSince(t time.Time) int { + return dFromDuration(t.Sub(t0)) +} + +func runReserve(t *testing.T, lim *Limiter, req request) *Reservation { + return runReserveMax(t, lim, req, InfDuration) +} + +func runReserveMax(t *testing.T, lim *Limiter, req request, maxReserve time.Duration) *Reservation { + r := lim.reserveN(req.t, req.n, maxReserve) + if r.ok && (dSince(r.timeToAct) != dSince(req.act)) || r.ok != req.ok { + t.Errorf("lim.reserveN(t%d, %v, %v) = (t%d, %v) want (t%d, %v)", + dSince(req.t), req.n, maxReserve, dSince(r.timeToAct), r.ok, dSince(req.act), req.ok) + } + return &r +} + +func TestSimpleReserve(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + runReserve(t, lim, request{t0, 2, t2, true}) + runReserve(t, lim, request{t3, 2, t4, true}) +} + +func TestMix(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 3, t1, false}) // should return false because n > Burst + runReserve(t, lim, request{t0, 2, t0, true}) + run(t, lim, []allow{{t1, 2, false}}) // not enought tokens - don't allow + runReserve(t, lim, request{t1, 2, t2, true}) + run(t, lim, []allow{{t1, 1, false}}) // negative tokens - don't allow + run(t, lim, []allow{{t3, 1, true}}) +} + +func TestCancelInvalid(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 3, t3, false}) + r.CancelAt(t0) // should have no effect + runReserve(t, lim, request{t0, 2, t2, true}) // did not get extra tokens +} + +func TestCancelLast(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 2, t2, true}) + r.CancelAt(t1) // got 2 tokens back + runReserve(t, lim, request{t1, 2, t2, true}) +} + +func TestCancelTooLate(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 2, t2, true}) + r.CancelAt(t3) // too late to cancel - should have no effect + runReserve(t, lim, request{t3, 2, t4, true}) +} + +func TestCancel0Tokens(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 1, t1, true}) + runReserve(t, lim, request{t0, 1, t2, true}) + r.CancelAt(t0) // got 0 tokens back + runReserve(t, lim, request{t0, 1, t3, true}) +} + +func TestCancel1Token(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 2, t2, true}) + runReserve(t, lim, request{t0, 1, t3, true}) + r.CancelAt(t2) // got 1 token back + runReserve(t, lim, request{t2, 2, t4, true}) +} + +func TestCancelMulti(t *testing.T) { + lim := NewLimiter(10, 4) + + runReserve(t, lim, request{t0, 4, t0, true}) + rA := runReserve(t, lim, request{t0, 3, t3, true}) + runReserve(t, lim, request{t0, 1, t4, true}) + rC := runReserve(t, lim, request{t0, 1, t5, true}) + rC.CancelAt(t1) // get 1 token back + rA.CancelAt(t1) // get 2 tokens back, as if C was never reserved + runReserve(t, lim, request{t1, 3, t5, true}) +} + +func TestReserveJumpBack(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t1, 2, t1, true}) // start at t1 + runReserve(t, lim, request{t0, 1, t1, true}) // should violate Limit,Burst + runReserve(t, lim, request{t2, 2, t3, true}) +} + +func TestReserveJumpBackCancel(t *testing.T) { + lim := NewLimiter(10, 2) + + runReserve(t, lim, request{t1, 2, t1, true}) // start at t1 + r := runReserve(t, lim, request{t1, 2, t3, true}) + runReserve(t, lim, request{t1, 1, t4, true}) + r.CancelAt(t0) // cancel at t0, get 1 token back + runReserve(t, lim, request{t1, 2, t4, true}) // should violate Limit,Burst +} + +func TestReserveSetLimit(t *testing.T) { + lim := NewLimiter(5, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + runReserve(t, lim, request{t0, 2, t4, true}) + lim.SetLimitAt(t2, 10) + runReserve(t, lim, request{t2, 1, t4, true}) // violates Limit and Burst +} + +func TestReserveSetLimitCancel(t *testing.T) { + lim := NewLimiter(5, 2) + + runReserve(t, lim, request{t0, 2, t0, true}) + r := runReserve(t, lim, request{t0, 2, t4, true}) + lim.SetLimitAt(t2, 10) + r.CancelAt(t2) // 2 tokens back + runReserve(t, lim, request{t2, 2, t3, true}) +} + +func TestReserveMax(t *testing.T) { + lim := NewLimiter(10, 2) + maxT := d + + runReserveMax(t, lim, request{t0, 2, t0, true}, maxT) + runReserveMax(t, lim, request{t0, 1, t1, true}, maxT) // reserve for close future + runReserveMax(t, lim, request{t0, 1, t2, false}, maxT) // time to act too far in the future +} + +type wait struct { + name string + ctx context.Context + n int + delay int // in multiples of d + nilErr bool +} + +func runWait(t *testing.T, lim *Limiter, w wait) { + start := time.Now() + err := lim.WaitN(w.ctx, w.n) + delay := time.Now().Sub(start) + if (w.nilErr && err != nil) || (!w.nilErr && err == nil) || w.delay != dFromDuration(delay) { + errString := "<nil>" + if !w.nilErr { + errString = "<non-nil error>" + } + t.Errorf("lim.WaitN(%v, lim, %v) = %v with delay %v ; want %v with delay %v", + w.name, w.n, err, delay, errString, d*time.Duration(w.delay)) + } +} + +func TestWaitSimple(t *testing.T) { + lim := NewLimiter(10, 3) + + ctx, cancel := context.WithCancel(context.Background()) + cancel() + runWait(t, lim, wait{"already-cancelled", ctx, 1, 0, false}) + + runWait(t, lim, wait{"exceed-burst-error", context.Background(), 4, 0, false}) + + runWait(t, lim, wait{"act-now", context.Background(), 2, 0, true}) + runWait(t, lim, wait{"act-later", context.Background(), 3, 2, true}) +} + +func TestWaitCancel(t *testing.T) { + lim := NewLimiter(10, 3) + + ctx, cancel := context.WithCancel(context.Background()) + runWait(t, lim, wait{"act-now", ctx, 2, 0, true}) // after this lim.tokens = 1 + go func() { + time.Sleep(d) + cancel() + }() + runWait(t, lim, wait{"will-cancel", ctx, 3, 1, false}) + // should get 3 tokens back, and have lim.tokens = 2 + t.Logf("tokens:%v last:%v lastEvent:%v", lim.tokens, lim.last, lim.lastEvent) + runWait(t, lim, wait{"act-now-after-cancel", context.Background(), 2, 0, true}) +} + +func TestWaitTimeout(t *testing.T) { + lim := NewLimiter(10, 3) + + ctx, cancel := context.WithTimeout(context.Background(), d) + defer cancel() + runWait(t, lim, wait{"act-now", ctx, 2, 0, true}) + runWait(t, lim, wait{"w-timeout-err", ctx, 3, 0, false}) +} + +func TestWaitInf(t *testing.T) { + lim := NewLimiter(Inf, 0) + + runWait(t, lim, wait{"exceed-burst-no-error", context.Background(), 3, 0, true}) +} + +func BenchmarkAllowN(b *testing.B) { + lim := NewLimiter(Every(1*time.Second), 1) + now := time.Now() + b.ReportAllocs() + b.ResetTimer() + b.RunParallel(func(pb *testing.PB) { + for pb.Next() { + lim.AllowN(now, 1) + } + }) +} + +func BenchmarkWaitNNoDelay(b *testing.B) { + lim := NewLimiter(Limit(b.N), b.N) + ctx := context.Background() + b.ReportAllocs() + b.ResetTimer() + for i := 0; i < b.N; i++ { + lim.WaitN(ctx, 1) + } +} diff --git a/src/kube2msb/vendor/golang.org/x/tour b/src/kube2msb/vendor/golang.org/x/tour new file mode 160000 +Subproject ced884f4700c5c9657569036e287a0653481574 diff --git a/src/kube2msb/vendor/k8s.io/kubernetes/pkg/util/flowcontrol/throttle.go b/src/kube2msb/vendor/k8s.io/kubernetes/pkg/util/flowcontrol/throttle.go index 482ba7d..e671c04 100644 --- a/src/kube2msb/vendor/k8s.io/kubernetes/pkg/util/flowcontrol/throttle.go +++ b/src/kube2msb/vendor/k8s.io/kubernetes/pkg/util/flowcontrol/throttle.go @@ -18,8 +18,9 @@ package flowcontrol import ( "sync" + "time" - "github.com/juju/ratelimit" + "golang.org/x/time/rate" ) type RateLimiter interface { @@ -30,15 +31,14 @@ type RateLimiter interface { Accept() // Stop stops the rate limiter, subsequent calls to CanAccept will return false Stop() - // Saturation returns a percentage number which describes how saturated - // this rate limiter is. - // Usually we use token bucket rate limiter. In that case, - // 1.0 means no tokens are available; 0.0 means we have a full bucket of tokens to use. - Saturation() float64 + // QPS returns QPS of this rate limiter + QPS() float32 } type tokenBucketRateLimiter struct { - limiter *ratelimit.Bucket + limiter *rate.Limiter + clock Clock + qps float32 } // NewTokenBucketRateLimiter creates a rate limiter which implements a token bucket approach. @@ -47,28 +47,57 @@ type tokenBucketRateLimiter struct { // The bucket is initially filled with 'burst' tokens, and refills at a rate of 'qps'. // The maximum number of tokens in the bucket is capped at 'burst'. func NewTokenBucketRateLimiter(qps float32, burst int) RateLimiter { - limiter := ratelimit.NewBucketWithRate(float64(qps), int64(burst)) - return &tokenBucketRateLimiter{limiter} + limiter := rate.NewLimiter(rate.Limit(qps), burst) + return newTokenBucketRateLimiter(limiter, realClock{}, qps) } -func (t *tokenBucketRateLimiter) TryAccept() bool { - return t.limiter.TakeAvailable(1) == 1 +// An injectable, mockable clock interface. +type Clock interface { + Now() time.Time + Sleep(time.Duration) } -func (t *tokenBucketRateLimiter) Saturation() float64 { - capacity := t.limiter.Capacity() - avail := t.limiter.Available() - return float64(capacity-avail) / float64(capacity) +type realClock struct{} + +func (realClock) Now() time.Time { + return time.Now() +} +func (realClock) Sleep(d time.Duration) { + time.Sleep(d) +} + +// NewTokenBucketRateLimiterWithClock is identical to NewTokenBucketRateLimiter +// but allows an injectable clock, for testing. +func NewTokenBucketRateLimiterWithClock(qps float32, burst int, c Clock) RateLimiter { + limiter := rate.NewLimiter(rate.Limit(qps), burst) + return newTokenBucketRateLimiter(limiter, c, qps) +} + +func newTokenBucketRateLimiter(limiter *rate.Limiter, c Clock, qps float32) RateLimiter { + return &tokenBucketRateLimiter{ + limiter: limiter, + clock: c, + qps: qps, + } +} + +func (t *tokenBucketRateLimiter) TryAccept() bool { + return t.limiter.AllowN(t.clock.Now(), 1) } // Accept will block until a token becomes available func (t *tokenBucketRateLimiter) Accept() { - t.limiter.Wait(1) + now := t.clock.Now() + t.clock.Sleep(t.limiter.ReserveN(now, 1).DelayFrom(now)) } func (t *tokenBucketRateLimiter) Stop() { } +func (t *tokenBucketRateLimiter) QPS() float32 { + return t.qps +} + type fakeAlwaysRateLimiter struct{} func NewFakeAlwaysRateLimiter() RateLimiter { @@ -79,34 +108,28 @@ func (t *fakeAlwaysRateLimiter) TryAccept() bool { return true } -func (t *fakeAlwaysRateLimiter) Saturation() float64 { - return 0 -} - func (t *fakeAlwaysRateLimiter) Stop() {} func (t *fakeAlwaysRateLimiter) Accept() {} +func (t *fakeAlwaysRateLimiter) QPS() float32 { + return 1 +} + type fakeNeverRateLimiter struct { wg sync.WaitGroup } func NewFakeNeverRateLimiter() RateLimiter { - wg := sync.WaitGroup{} - wg.Add(1) - return &fakeNeverRateLimiter{ - wg: wg, - } + rl := fakeNeverRateLimiter{} + rl.wg.Add(1) + return &rl } func (t *fakeNeverRateLimiter) TryAccept() bool { return false } -func (t *fakeNeverRateLimiter) Saturation() float64 { - return 1 -} - func (t *fakeNeverRateLimiter) Stop() { t.wg.Done() } @@ -114,3 +137,7 @@ func (t *fakeNeverRateLimiter) Stop() { func (t *fakeNeverRateLimiter) Accept() { t.wg.Wait() } + +func (t *fakeNeverRateLimiter) QPS() float32 { + return 1 +} diff --git a/src/kube2msb/vendor/vendor.json b/src/kube2msb/vendor/vendor.json index f6f1d8e..379be52 100644 --- a/src/kube2msb/vendor/vendor.json +++ b/src/kube2msb/vendor/vendor.json @@ -199,13 +199,6 @@ "revisionTime": "2016-07-12T10:00:20Z" }, { - "checksumSHA1": "sKheT5xw89Tbu2Q071FQO27CVmE=", - "origin": "k8s.io/kubernetes/vendor/github.com/juju/ratelimit", - "path": "github.com/juju/ratelimit", - "revision": "baa956b6864800c46094b68723bbe316c65035be", - "revisionTime": "2016-07-12T10:00:20Z" - }, - { "checksumSHA1": "Q2vw4HZBbnU8BLFt8VrzStwqSJg=", "origin": "k8s.io/kubernetes/vendor/github.com/matttproud/golang_protobuf_extensions/pbutil", "path": "github.com/matttproud/golang_protobuf_extensions/pbutil", |