Merge "Remove bash version of installer"

51 files changed, 95 insertions, 2183 deletions

diff --git a/bash/deploy_onap.sh b/bash/deploy_onap.sh
deleted file mode 100755
index d8ae4f3e..00000000
--- a/bash/deploy_onap.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# fail fast
-set -e
-
-# OS check
-. /etc/os-release
-OS_ID="${ID}"
-
-case "$OS_ID" in
-    centos)
-        ;;
-    rhel)
-        ;;
-    ubuntu)
-        ;;
-    *)
-        echo This OS is not supported: $OS_ID
-        exit 1
-        ;;
-esac
-
-# boilerplate
-RELATIVE_PATH=./tools # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-get_configuration
-copy_onap_values_file
-patch_npm_oom
-patch_spring_oom
-patch_cfy_manager_depl $OS_ID
-deploy_onap
diff --git a/bash/tools/000cleanup.sh b/bash/tools/000cleanup.sh
deleted file mode 100755
index 3349c501..00000000
--- a/bash/tools/000cleanup.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-oldifs=$IFS
-IFS=$'\n'
-
-echo "Deleting containers"
-for x in $(docker ps -a); do
-    cid=$(echo "$x" | awk '{print $1}')
-    docker rm -f $cid
-done
-
-echo "Deleting volumes"
-for x in $(docker volume ls | grep -v 'nexus-data'); do
-    name=$(echo "$x" | awk '{print $2}')
-#    echo "A: $name"
-    docker volume rm $name
-done
-
-echo "Unmounting kubelet pods"
-for x in $(mount | grep 'kubelet/pods\|rancher\|docker' | cut -d ' ' -f 3) ; do umount "$x" ; done
-
-rm -rfd /var/lib/kubelet/*
-rm -rfd /var/lib/rancher/*
-rm -rfd /var/lib/docker/*
-
diff --git a/bash/tools/certificates/2create_cert_for_nginx.sh b/bash/tools/certificates/2create_cert_for_nginx.sh
deleted file mode 100755
index a9adb520..00000000
--- a/bash/tools/certificates/2create_cert_for_nginx.sh
+++ /dev/null
@@ -1,47 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# fail fast
-set -e
-
-# boilerplate
-RELATIVE_PATH=../ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-message info "Reading configuration"
-get_configuration
-
-update_hosts
-
-message info "Restarting dnsmasq"
-systemctl enable dnsmasq
-systemctl restart dnsmasq
-
-message info "Configure ssl certificates"
-create_cert "nexus"
-
-message info "** Certificates finished **"
-
-docker restart nginx
diff --git a/bash/tools/certificates/self_extract_cacert.sh b/bash/tools/certificates/self_extract_cacert.sh
deleted file mode 100755
index 1e7a5abc..00000000
--- a/bash/tools/certificates/self_extract_cacert.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#! /bin/sh
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-
-extract_ca() {
-    cpath=$1
-    sed '0,/^#EOF#$/d' $0 > $cpath;
-    echo "Certificate installed into: $cpath"
-}
-
-OS_ID=$(awk -F= '/^ID=/{print $2}' /etc/os-release)
-OS_ID="${OS_ID%\"}"
-OS_ID="${OS_ID#\"}"
-
-if [ "$OS_ID" = "rhel" -o "$OS_ID" = "centos" ]; then
-    # for centos/ rhel
-    echo "Detected rhel like distribution"
-
-    update-ca-trust force-enable
-    extract_ca /etc/pki/ca-trust/source/anchors/rootCAcert.crt
-    update-ca-trust extract
-
-elif [ "$OS_ID" = "ubuntu" ]; then
-    echo "Detected ubuntu distribution"
-
-    mkdir -p /usr/local/share/ca-certificates/extra
-    extract_ca /usr/local/share/ca-certificates/extra/rootCAcert.crt
-    update-ca-certificates
-else
-    echo "OS $OS_ID is not supported"
-    exit -2
-fi
-
-echo "** Please restart docker (because of reload new CA) **"
-
-exit 0
-#EOF#
diff --git a/bash/tools/common-functions.sh b/bash/tools/common-functions.sh
deleted file mode 100755
index 6ffb42a7..00000000
--- a/bash/tools/common-functions.sh
+++ /dev/null
@@ -1,658 +0,0 @@
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-#
-# this file contains shared variables and functions for the onap installer
-#
-
-# any script which needs this file can check this variable
-# and it will know immediately if the functions and variables
-# are loaded and usable
-IS_COMMON_FUNCTIONS_SOURCED=YES
-
-# setting of the path variables
-if [ -z "$APROJECT_DIR" ] ; then
-    INCLUDE_PATH="${LOCAL_PATH}"/"${RELATIVE_PATH}"
-    APROJECT_DIR=$(readlink -f "$INCLUDE_PATH"/../..)
-fi
-
-RESOURCES_DIR="$APROJECT_DIR/resources"
-BASH_SCRIPTS_DIR="$APROJECT_DIR/bash"
-NEXUS_DATA="$RESOURCES_DIR/nexus_data"
-CERTS_TARGET_PATH="$APROJECT_DIR/live/certs"
-NGINX_LOG_DIR="$APROJECT_DIR/live/nginx_logs"
-GEN_CFG_PATH="$APROJECT_DIR/live/cfg"
-GIT_REPOS="$RESOURCES_DIR/git-repo"
-NGINX_HTTP_DIR="$RESOURCES_DIR/http"
-RHEL_REPO="$RESOURCES_DIR/pkg/rhel"
-
-PATH="${PATH}:/usr/local/bin:/usr/local/sbin"
-export PATH
-
-# just self-defense against locale
-LANG=C
-export LANG
-
-# dns handling
-SIMUL_HOSTS="gcr.io \
-git.rancher.io \
-gerrit.onap.org \
-registry-1.docker.io \
-docker.io \
-registry.npmjs.org \
-nexus3.onap.org \
-nexus.onap.org \
-docker.elastic.co \
-www.getcloudify.org \
-www.springframework.org \
-registry.hub.docker.com \
-git.onap.org \
-repo1.maven.org \
-repo.maven.apache.org"
-
-# default credentials to the repository
-NEXUS_USERNAME=admin
-NEXUS_PASSWORD=admin123
-NEXUS_EMAIL=admin@onap.org
-
-# this function is intended to unify the installer output
-message() {
-    case "$1" in
-        info)
-            echo 'INFO:' "$@"
-            ;;
-        debug)
-            echo 'DEBUG:' "$@" >&2
-            ;;
-        warning)
-            echo 'WARNING [!]:' "$@" >&2
-            ;;
-        error)
-            echo 'ERROR [!!]:' "$@" >&2
-            return 1
-            ;;
-        *)
-            echo 'UNKNOWN [?!]:' "$@" >&2
-            return 2
-            ;;
-    esac
-    return 0
-}
-export message
-
-# if the environment variable DEBUG is set to DEBUG-ONAP ->
-#  -> this function will print its arguments
-# otherwise nothing is done
-debug() {
-    [ "$DEBUG" = DEBUG-ONAP ] && message debug "$@"
-}
-export debug
-
-fail() {
-    message error "$@"
-    exit 1
-}
-
-retry() {
-    local n=1
-    local max=5
-    while ! "$@"; do
-        if [ $n -lt $max ]; then
-            n=$((n + 1))
-            message warning "Command ${@} failed. Attempt: $n/$max"
-            message info "waiting 10s for another try..."
-            sleep 10s
-        else
-            fail "Command ${@} failed after $n attempts. Better to abort now."
-        fi
-    done
-}
-
-may_self_extract() {
-    # extract and untar to the current directory
-    sed '0,/^# PAYLOAD BELOW #$/d' "$0" | tar -xvpf - ;
-}
-
-update_hosts() {
-    if grep -q "^[^#]\+\s$SIMUL_HOSTS\s*\$" /etc/hosts ; then
-        message info "simulated domains already in /etc/hosts"
-    else
-        echo "$LOCAL_IP $SIMUL_HOSTS" >> /etc/hosts
-        message info "simulated domains added to /etc/hosts (please check it)"
-    fi
-
-    if grep -q "^[^#]\+\s$NEXUS_FQDN\s*\$" /etc/hosts ; then
-        message info "nexus FQDN already in /etc/hosts"
-    else
-        echo "$LOCAL_IP $NEXUS_FQDN" >> /etc/hosts
-        message info "Nexus FQDN added to /etc/hosts (please check it)"
-    fi
-
-    if grep -q "^[^#]\+\srepo.install-server\s*\$" /etc/hosts ; then
-        message info "custom repo FQDN already in /etc/hosts"
-    else
-        echo "$LOCAL_IP repo.install-server" >> /etc/hosts
-        message info "Nexus FQDN added to /etc/hosts (please check it)"
-    fi
-}
-
-get_cfg_val() {
-    name="$1"
-    shift
-    ask="$@"
-
-    value=$(eval "echo \$${name}")
-    if [ -z "$value" ]; then
-        while [ -z "$value" ] ; do
-            printf "${ask}"
-            read -r $name
-
-            value=$(eval "echo \$${name}")
-        done
-        echo "${name}='${value}'" >> ./local_repo.conf
-    fi
-}
-
-get_configuration() {
-    if [ -f ./local_repo.conf ]; then
-        . ./local_repo.conf
-    fi
-
-    if [ -z "${NEXUS_FQDN}" ]; then
-        NEXUS_FQDN="nexus.$HOSTNAME"
-        echo "NEXUS_FQDN='${NEXUS_FQDN}'" >> ./local_repo.conf
-    fi
-
-    if [ -z "${ONAP_SCALE}" ]; then
-        ONAP_SCALE=full
-        echo "ONAP_SCALE='${ONAP_SCALE}'" >> ./local_repo.conf
-    fi
-
-    # nexus should be configured using those default entries
-    # if it was not put the correct inputs instead
-    if [ -z "${NPM_USERNAME}" ]; then
-        NPM_USERNAME="${NEXUS_USERNAME}"
-        echo "NPM_USERNAME='${NPM_USERNAME}'" >> ./local_repo.conf
-    fi
-
-    if [ -z "${NPM_PASSWORD}" ]; then
-        NPM_PASSWORD="${NEXUS_PASSWORD}"
-        echo "NPM_PASSWORD='${NPM_PASSWORD}'" >> ./local_repo.conf
-    fi
-
-    if [ -z "${NPM_EMAIL}" ]; then
-        NPM_EMAIL="$NEXUS_EMAIL"
-        echo "NPM_EMAIL='${NPM_EMAIL}'" >> ./local_repo.conf
-    fi
-
-    export NEXUS_FQDN
-    export ONAP_SCALE
-    export NPM_USERNAME
-    export NPM_PASSWORD
-    export NPM_EMAIL
-
-    NODE_USERNAME="root"
-
-    if [ -z "$LOCAL_IP" ] ; then
-        echo
-        echo "======= Mandatory configuration ======="
-        echo
-        message info "fill in these mandatory configuration values"
-        get_cfg_val "LOCAL_IP" "Enter the public IPv4 used for this '$HOSTNAME' install machine," \
-            "\nDO NOT USE LOOPBACK! (for example: 10.0.0.1): "
-    fi
-}
-
-enable_local_repo() {
-    sed -r "s%PATH%file://$APROJECT_DIR/resources/pkg/rhel%" "$APROJECT_DIR/resources/pkg/rhel/onap.repo" > /etc/yum.repos.d/onap.repo
-}
-
-install_packages() {
-    os_id="$1"
-
-    message info "Installing packages"
-
-    case "$os_id" in
-        centos)
-            yum -y install "$APROJECT_DIR/resources/pkg/centos/*.rpm"
-            ;;
-        rhel)
-            enable_local_repo
-            yum -y install docker-ce dnsmasq icewm firefox tigervnc-server
-            systemctl enable docker
-            systemctl start docker
-            ;;
-        ubuntu)
-            dpkg -i "$APROJECT_DIR/resources/pkg/ubuntu/*.deb"
-            ;;
-        *)
-            message error "OS release is not supported: $os_id"
-            message info "ABORTING INSTALLATION"
-            exit 1
-            ;;
-    esac
-}
-
-install_files() {
-    message info "installation of external binaries"
-    for binary in kubectl helm rancher jq ; do
-        cp "$APROJECT_DIR/resources/downloads/${binary}" /usr/local/bin/
-        chmod 755 "/usr/local/bin/${binary}"
-    done
-    mkdir -p ~/.kube
-}
-
-setup_vnc_server() {
-    mkdir -p ~/.vnc ~/.icewm
-    echo "onap" | vncpasswd -f > ~/.vnc/passwd
-    chmod 0600 ~/.vnc/passwd
-
-    cat > ~/.vnc/xstartup <<EOF
-#!/bin/sh
-
-unset SESSION_MANAGER
-unset DBUS_SESSION_BUS_ADDRESS
-exec icewm-session
-
-EOF
-
-chmod +x ~/.vnc/xstartup
-
-    cat > ~/.icewm/menu <<EOF
-prog Firefox firefox firefox
-separator
-
-EOF
-vncserver
-}
-
-update_docker_cfg() {
-    if [ -f "/etc/docker/daemon.json" ]; then
-        jq '.dns += ["172.17.0.1"]' /etc/docker/daemon.json > /tmp/daemon.json
-        mv /tmp/daemon.json /etc/docker/daemon.json
-    else
-        echo '{"dns": ["172.17.0.1"]}' > /etc/docker/daemon.json
-    fi
-}
-
-create_root_CA() {
-    echo "** Generate certificates **"
-    openssl genrsa -out $CERTS_TARGET_PATH/rootCA.key 4096
-
-    echo "** Generate self signed ***"
-    openssl req -config $GEN_CFG_PATH/cacert.cnf -key $CERTS_TARGET_PATH/rootCA.key -new -x509 -days 7300 -sha256 -extensions v3_ca \
-                  -out $CERTS_TARGET_PATH/rootCAcert.pem
-
-
-    # convert to crt
-    openssl x509 -in $CERTS_TARGET_PATH/rootCAcert.pem -inform PEM -out $CERTS_TARGET_PATH/rootCAcert.crt
-}
-
-install_root_CA() {
-    os=$1
-    echo "** Publishing root CA **"
-    if [ "$os" == "redhat" ]; then
-        # for centos
-        update-ca-trust force-enable
-        cp $CERTS_TARGET_PATH/rootCAcert.crt /etc/pki/ca-trust/source/anchors/
-        update-ca-trust extract
-    elif [ "$os" == "ubuntu" ]; then
-        mkdir -p /usr/local/share/ca-certificates/extra
-        cp $CERTS_TARGET_PATH/rootCAcert.crt /usr/local/share/ca-certificates/extra
-        update-ca-certificates
-    else
-        echo "OS \"$os\" is not supported"
-        exit -2
-    fi
-
-    echo "** Restart docker (because of reload new CA) **"
-    systemctl restart docker
-
-}
-
-create_cert() {
-    server_name=$1
-
-    openssl genrsa -out $CERTS_TARGET_PATH/${server_name}_server.key 4096
-    echo "** Generate sig request ***"
-    openssl req -new -config $GEN_CFG_PATH/${server_name}_cert.cnf -key $CERTS_TARGET_PATH/${server_name}_server.key -out $CERTS_TARGET_PATH/${server_name}_server.csr
-
-    # v3.ext must be in separate file , because of bug in openssl 1.0
-    echo "** sign **"
-    openssl x509 -req -in $CERTS_TARGET_PATH/${server_name}_server.csr\
-    -extfile $GEN_CFG_PATH/v3.ext\
-    -CA $CERTS_TARGET_PATH/rootCAcert.crt\
-    -CAkey $CERTS_TARGET_PATH/rootCA.key\
-    -CAcreateserial -out $CERTS_TARGET_PATH/${server_name}_server.crt -days 3650 -sha256
-}
-
-create_all_certs() {
-    create_cert "nexus"
-}
-
-update_firewall() {
-# TODO
-#firewall-cmd --permanent --add-port=53/udp
-#firewall-cmd --permanent --add-port=53/tcp
-#firewall-cmd --permanent --add-port=10001/tcp
-#firewall-cmd --permanent --add-port=80/tcp
-#firewall-cmd --permanent --add-port=443/tcp
-return 0
-}
-
-distribute_root_CA() {
-    targetip=$1
-    scp $APROJECT_DIR/install_cacert.sh $targetip:.
-    ssh $targetip ./install_cacert.sh
-    echo "** Add DNS record to remote host **"
-    ssh $targetip "echo nameserver $LOCAL_IP > /etc/resolv.conf"
-}
-
-upload_ansible_pkgs() {
-    os=$1
-    targetip=$2
-    #if [[ $os == "ubuntu" ]]; then
-    # those deb & whl packages are needed for sdnc-ansible-server pod
-    # independently on host OS distros
-    echo "** Copy required packages for sdnc-ansible-pod to kubernetes node $targetip **"
-    scp -r $APROJECT_DIR/resources/pkg/ubuntu/ansible_pkg $targetip:.
-    #fi
-}
-
-remote_setup_nfs_server() {
-    os=$1
-    targetip=$2
-    shift 2
-    scp $APROJECT_DIR/bash/tools/setup_nfs_server_${os}.sh $targetip:setup_nfs_server.sh
-    if [[ $os == "ubuntu" ]]; then
-        scp -r $APROJECT_DIR/resources/pkg/ubuntu/nfs-common-pkg/* $targetip:.
-        ssh $targetip dpkg -i *.deb
-    fi
-
-    ssh $targetip /bin/bash ./setup_nfs_server.sh "$@"
-}
-
-remote_setup_nfs_mount() {
-    os=$1
-    targetip=$2
-    nfsip=$3
-    scp $APROJECT_DIR/bash/tools/setup_nfs_mount.sh $targetip:.
-    if [[ $os == "ubuntu" ]]; then
-        scp -r $APROJECT_DIR/resources/pkg/ubuntu/nfs-common-pkg/* $targetip:.
-        ssh $targetip dpkg -i *.deb
-    fi
-    ssh $targetip /bin/bash ./setup_nfs_mount.sh $nfsip
-}
-
-enable_remote_repo() {
-    targetip=$1
-    sed -r "s%PATH%http://repo.install-server%" $APROJECT_DIR/resources/pkg/rhel/onap.repo | ssh $targetip 'cat > /etc/yum.repos.d/onap.repo'
-}
-
-install_remote_docker() {
-    targetip=$1
-    os=$2
-    if [[ $os == "ubuntu" ]]; then
-        scp -r $APROJECT_DIR/resources/pkg/ubuntu/{docker-ce_17.03.2~ce-0~ubuntu-xenial_amd64.deb,libltdl7_2.4.6-0.1_amd64.deb} $targetip:.
-        ssh $targetip dpkg -i *.deb
-    elif [[ $os == "rhel" ]]; then
-        ssh $targetip yum -y install docker-ce
-    fi
-    ssh $targetip "mkdir -p /etc/docker"
-    scp "$APROJECT_DIR/resources/downloads/jq" $targetip:/usr/local/bin/
-    ssh $targetip "if [[ -f /etc/docker/daemon.json ]]; then
-                       jq '.dns += [\"$LOCAL_IP\"]' /etc/docker/daemon.json > /tmp/daemon.json
-                       mv /tmp/daemon.json /etc/docker/daemon.json
-                   else
-                       echo {'\"'dns'\"': ['\"'$LOCAL_IP'\"']} > /etc/docker/daemon.json
-                   fi"
-
-    ssh $targetip 'systemctl enable docker; systemctl restart docker'
-}
-
-deploy_rancher() {
-    docker run -d --entrypoint "/bin/bash" --restart=unless-stopped -p 8080:8080 \
-    -v $CERTS_TARGET_PATH:/usr/local/share/ca-certificates/extra:ro \
-    --name rancher_server rancher/server:v1.6.14 \
-    -c "/usr/sbin/update-ca-certificates;/usr/bin/entry /usr/bin/s6-svscan /service"
-    echo "** wait until rancher is ready **"
-}
-
-deploy_kubernetes() {
-    os=$1
-    set +e
-    for i in `seq 5 -1 1`; do
-        API_RESPONSE=`curl -s 'http://127.0.0.1:8080/v2-beta/apikey' \
-            -d '{"type":"apikey","accountId":"1a1","name":"autoinstall"\
-                 ,"description":"autoinstall","created":null,"kind":null,\
-                 "removeTime":null,"removed":null,"uuid":null}'`
-        if [[ "$?" -eq 0 ]]; then
-            KEY_PUBLIC=`echo $API_RESPONSE | jq -r .publicValue`
-            KEY_SECRET=`echo $API_RESPONSE | jq -r .secretValue`
-            break
-        fi
-        echo "Waiting for rancher server to start"
-        sleep 60
-    done
-    set -e
-    export RANCHER_URL=http://${LOCAL_IP}:8080
-    export RANCHER_ACCESS_KEY=$KEY_PUBLIC
-    export RANCHER_SECRET_KEY=$KEY_SECRET
-
-    rancher env ls
-    echo "wait 60 sec for rancher environments can settle before we create the onap kubernetes one"
-    sleep 60
-
-    rancher env create -t kubernetes onap > kube_env_id.json
-    PROJECT_ID=$(<kube_env_id.json)
-    echo "env id: $PROJECT_ID"
-    export RANCHER_HOST_URL=http://${LOCAL_IP}:8080/v1/projects/$PROJECT_ID
-
-    for i in `seq 5`; do
-        status=$(rancher env ls | grep $PROJECT_ID | awk '{print $4}')
-        if [[ "$status" == "active" ]]; then
-            echo "Check on environments again before registering the URL response"
-            rancher env ls
-            break
-        fi
-        echo "Wait for environment to become active"
-        sleep 30
-    done
-
-    REG_URL_RESPONSE=`curl -X POST -u $KEY_PUBLIC:$KEY_SECRET -H 'Accept: application/json' -H 'ContentType: application/json' -d '{"name":"$LOCAL_IP"}' "http://$LOCAL_IP:8080/v1/projects/$PROJECT_ID/registrationtokens"`
-    echo "wait for server to finish url configuration - 3 min"
-    sleep 180
-    # see registrationUrl in
-    REGISTRATION_TOKENS=`curl http://127.0.0.1:8080/v2-beta/registrationtokens`
-    REGISTRATION_DOCKER=`echo $REGISTRATION_TOKENS | jq -r .data[0].image`
-    REGISTRATION_TOKEN=`echo $REGISTRATION_TOKENS | jq -r .data[0].token`
-
-    # base64 encode the kubectl token from the auth pair
-    # generate this after the host is registered
-    KUBECTL_TOKEN=$(echo -n 'Basic '$(echo -n "$RANCHER_ACCESS_KEY:$RANCHER_SECRET_KEY" | base64 -w 0) | base64 -w 0)
-    echo "KUBECTL_TOKEN base64 encoded: ${KUBECTL_TOKEN}"
-    cat > ~/.kube/config <<EOF
-apiVersion: v1
-kind: Config
-clusters:
-- cluster:
-    api-version: v1
-    insecure-skip-tls-verify: true
-    server: "https://$LOCAL_IP:8080/r/projects/$PROJECT_ID/kubernetes:6443"
-  name: "onap"
-contexts:
-- context:
-    cluster: "onap"
-    user: "onap"
-  name: "onap"
-current-context: "onap"
-users:
-- name: "onap"
-  user:
-    token: "$KUBECTL_TOKEN"
-
-EOF
-
-    if [[ $os == "rhel" ]]; then
-        echo "Upgrade datavolume for RHEL"
-        KUBELET_ID=`curl http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/ | jq -r '.data[] | select(.name=="kubelet")'.id`
-        OLD_LAUNCH_CONFIG=`curl http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID} | jq  '.launchConfig'`
-        NEW_LAUNCH_CONFIG=`echo $OLD_LAUNCH_CONFIG | jq '.dataVolumes[2]="/sys/fs/cgroup:/sys/fs/cgroup:ro,rprivate"'`
-
-        DATA="{
-                \"inServiceStrategy\": {
-                  \"batchSize\": 1,
-                  \"intervalMillis\": 2000,
-                  \"startFirst\": false,
-                  \"launchConfig\": ${NEW_LAUNCH_CONFIG},
-                  \"secondaryLaunchConfigs\": []
-                }
-        }"
-        curl -s -u $KEY_PUBLIC:$KEY_SECRET -X POST -H 'Content-Type: application/json' -d "${DATA}" "http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID}?action=upgrade" > /dev/null
-
-        echo "Give environment time to update (30 sec)"
-        sleep 30
-
-        curl -s -u $KEY_PUBLIC:$KEY_SECRET -X POST "http://${LOCAL_IP}:8080/v2-beta/projects/${PROJECT_ID}/services/${KUBELET_ID}?action=finishupgrade" > /dev/null
-    fi
-}
-
-deploy_rancher_agent() {
-    nodeip=$1
-    if [ -z "$REGISTRATION_DOCKER" ]; then
-        echo "ASSERT: Missing REGISTRATION_DOCKER"
-        exit 1
-    fi
-    if [ -z "$RANCHER_URL" ]; then
-        echo "ASSERT: Missing RANCHER_URL"
-        exit 1
-    fi
-    if [ -z "$REGISTRATION_TOKEN" ]; then
-        echo "ASSERT: Missing REGISTRATION_TOKEN"
-        exit 1
-    fi
-
-    ssh $nodeip "docker run --rm --privileged -v /var/run/docker.sock:/var/run/docker.sock -v /var/lib/racher:/var/lib/rancher $REGISTRATION_DOCKER $RANCHER_URL/v1/scripts/$REGISTRATION_TOKEN"
-    echo "waiting 2 min for creating kubernetes environment"
-    sleep 120
-}
-
-deploy_node() {
-    nodeip=$1
-    os=$2
-    echo "Deploying node $nodeip"
-    distribute_root_CA $nodeip
-    install_remote_docker $nodeip $os
-    deploy_rancher_agent $nodeip
-}
-
-deploy_onap() {
-    pushd $APROJECT_DIR/resources/oom/kubernetes
-    helm init --upgrade --skip-refresh
-    # this might fail
-    set +e
-    helm repo remove stable
-    set -e
-    helm serve &
-    echo "wait a moment before helm will come up ..."
-    sleep 5
-    helm repo add local http://127.0.0.1:8879
-    make all
-    #Pass the CA certificate contents directly during installation.
-    helm install local/onap -n dev --namespace onap \
-      --set "global.cacert=$(cat ${CERTS_TARGET_PATH}/rootCAcert.crt)"
-    popd
-}
-
-expand_file() {
-    file=$1
-    # print warning if patched file does not exist as some charts
-    # might not be available for some deployments
-    if [ ! -f "$file" ]; then
-      echo "WARNING: Can't patch file $file because this file does not exists."
-      return 0
-    fi
-
-    shift
-
-    for ivar in "$@" ; do
-        ivalue=$(eval 'echo "$'${ivar}'"')
-        sed -i "s#${ivar}#${ivalue}#g" "$file"
-    done
-}
-
-patch_npm_oom() {
-    if [ -z "$LOCAL_IP" ] ; then
-        echo "ERROR: LOCAL_IP unset"
-        return 1
-    fi
-    if [ -z "$NEXUS_FQDN" ] ; then
-        echo "ERROR: NEXUS_FQDN unset"
-        return 1
-    fi
-
-    UPDATE_HOSTS_FILE="$LOCAL_IP $NEXUS_FQDN"
-    UPDATE_NPM_REGISTRY="npm set registry \"http://${NEXUS_FQDN}/repository/npm-private/\""
-
-    expand_file $APROJECT_DIR/resources/oom/kubernetes/common/dgbuilder/templates/deployment.yaml \
-        UPDATE_HOSTS_FILE \
-        UPDATE_NPM_REGISTRY
-    expand_file $APROJECT_DIR/resources/oom/kubernetes/sdnc/charts/sdnc-portal/templates/deployment.yaml \
-        UPDATE_HOSTS_FILE \
-        UPDATE_NPM_REGISTRY
-}
-
-patch_spring_oom() {
-    if [ -z "$LOCAL_IP" ] ; then
-        echo "ERROR: LOCAL_IP unset"
-        return 1
-    fi
-
-    UPDATE_HOSTS_FILE="$LOCAL_IP www.springframework.org"
-    expand_file $APROJECT_DIR/resources/oom/kubernetes/dmaap/charts/message-router/templates/deployment.yaml \
-        UPDATE_HOSTS_FILE
-}
-
-patch_cfy_manager_depl() {
-    os="$1"
-    file="${APROJECT_DIR}/resources/oom/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml"
-
-    case "$os" in
-        centos|rhel)
-            CERT_PATH="/etc/pki/ca-trust/source/anchors"
-            ;;
-        ubuntu)
-            CERT_PATH="/usr/local/share/ca-certificates/extra"
-            ;;
-        '')
-            echo "ERROR: missing argument"
-            return 1
-            ;;
-        *)
-            echo "ERROR: unknown OS: ${os}"
-            return 1
-            ;;
-    esac
-
-    expand_file "$file" CERT_PATH
-}
-
-copy_onap_values_file() {
-    cp "${APROJECT_DIR}/${CUSTOM_CFG_RELPATH:-cfg}/${ONAP_SCALE}_depl_values.yaml" \
-        "${APROJECT_DIR}/resources/oom/kubernetes/onap/values.yaml"
-}
diff --git a/bash/tools/create_si_cacert_pkg.sh b/bash/tools/create_si_cacert_pkg.sh
deleted file mode 100755
index 197f0c0f..00000000
--- a/bash/tools/create_si_cacert_pkg.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#! /bin/bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-self="$0"
-tools_dir=$(dirname "$self")
-
-TARGET_FILE="./install_cacert.sh"
-
-cat "$tools_dir/certificates/self_extract_cacert.sh" "$tools_dir/../../live/certs/rootCAcert.crt" > $TARGET_FILE
-chmod a+x $TARGET_FILE
-echo "Created self installation file: $TARGET_FILE"
diff --git a/bash/tools/create_si_onap_pkg.sh b/bash/tools/create_si_onap_pkg.sh
deleted file mode 100755
index 759a1ebc..00000000
--- a/bash/tools/create_si_onap_pkg.sh
+++ /dev/null
@@ -1,88 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# fail fast
-set -e
-
-# boilerplate
-RELATIVE_PATH=./ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-if [ -z "$1" ]; then
-  VERSION="RC3"
-  message info "no argument supplied, keeping default naming: $VERSION"
-else
-  VERSION="$1"
-fi
-
-# name of the self-extract-installer
-TARGET_FILE="$APROJECT_DIR/selfinstall_onap_beijing_"$VERSION".sh"
-
-# inserting the head of the script
-cat > "$TARGET_FILE" <<EOF
-#! /usr/bin/env bash
-
-#
-# This is self-extract installer for onap
-#
-
-# fail fast
-set -e
-
-# boilerplate
-SCRIPT_DIR=\$(dirname "\${0}")
-APROJECT_DIR=\$(readlink -f "\$SCRIPT_DIR")
-IS_SELF_EXTRACT=YES
-
-EOF
-
-# splicing the scripts together
-cat "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh >> "$TARGET_FILE"
-cat "${LOCAL_PATH}"/"${RELATIVE_PATH}"/deploy_nexus.sh >> "$TARGET_FILE"
-cat "${LOCAL_PATH}"/"${RELATIVE_PATH}"/deploy_kube.sh >> "$TARGET_FILE"
-
-# finishing touches to the script
-cat >> "$TARGET_FILE" <<EOF
-
-exit 0
-
-#
-# Installer script ends here
-# The rest of this file is a binary payload
-# ! DO NOT MODIFY IT !
-#
-
-# PAYLOAD BELOW #
-EOF
-
-# appending the tar to the script
-cd "$APROJECT_DIR"
-tar -h --exclude='.git' --exclude='*.swp' --exclude='selfinstall_onap_*.sh' --exclude='ansible' --exclude='docker' --exclude='local_repo.conf' --exclude='live' -cvf - * >> "$TARGET_FILE"
-cd -
-
-chmod 755 "$TARGET_FILE"
-message info "Created Nexus self installation file: $TARGET_FILE"
-
-exit 0
diff --git a/bash/tools/creating_data/docker-login.sh b/bash/tools/creating_data/docker-login.sh
deleted file mode 100755
index d57e23bd..00000000
--- a/bash/tools/creating_data/docker-login.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# boilerplate
-RELATIVE_PATH=../ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-echo "Reading configuration"
-get_configuration
-
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}"
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}" docker.elastic.co
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}" gcr.io
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}" nexus3.onap.org:10001
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}" registry.hub.docker.com
-docker login -u "${NEXUS_USERNAME}" -p "${NEXUS_PASSWORD}" "$NEXUS_FQDN"
diff --git a/bash/tools/creating_data/load-docker-images.sh b/bash/tools/creating_data/load-docker-images.sh
deleted file mode 100755
index 685bed42..00000000
--- a/bash/tools/creating_data/load-docker-images.sh
+++ /dev/null
@@ -1,75 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# boilerplate
-RELATIVE_PATH=../ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-CLEAN=false
-
-if [ -z "$NEXUS_HOST" ]; then
-    echo "Independent run for inserting of additional docker images"
-    CLEAN=true
-    mv ~/.docker/config.json ~/.docker/config.json_backup 2>/dev/null
-    source "$LOCAL_PATH/docker-login.sh"
-fi
-
-IMG_DIR="$1"
-if [[ -z "$IMG_DIR" ]]; then
-    IMG_DIR="$(pwd)/images"
-fi
-
-if [[ ! -d "${IMG_DIR}" ]]; then
-    echo "No ${IMG_DIR} to load images"
-    exit 0
-fi
-
-load_image() {
-    local image="$1"
-    echo "[DEBUG] load ${image}"
-    result=$(docker load -i "${image}")
-    echo $result
-    name=$(echo $result | awk '{print $3}')
-    echo "[DEBUG] pushing $name"
-    retry docker push "$name"
-    # delete pushed image from docker
-    retry docker rmi "$name"
-}
-
-IMAGES=$(find ${IMG_DIR} -name "*.tar" -type f)
-lines=$(echo ${IMAGES} | wc -l)
-line=1
-for image in ${IMAGES}; do
-    echo "== pkg #$line of $lines =="
-    load_image "$image"
-
-    line=$((line+1))
-done
-
-if [ "$CLEAN" = true ]; then
-    # onap is using different credentials for docker login which can be conflicted
-    # with ours so better to clean this-up
-    rm ~/.docker/config.json
-fi
diff --git a/bash/tools/creating_data/upload-maven-files.sh b/bash/tools/creating_data/upload-maven-files.sh
deleted file mode 100755
index 07d6e7ab..00000000
--- a/bash/tools/creating_data/upload-maven-files.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-DATA_DIR="$1"
-if [[ -z "$DATA_DIR" ]]; then
-    # needs for example: /root/onap-offline-installer/http
-    echo "Mising arg DATA_DIR"
-    echo "Usage: $0 <path to http dir> <name of server> [<next server>...]"
-    exit 1
-fi
-
-shift
-cd "$DATA_DIR"
-
-for server in $*; do
-    echo "Uploading to server: $server"
-
-    lines=$(find $server/ -type f | wc -l)
-    count=1
-    while read -r url; do
-        echo "== pkg #$count of $lines =="
-        count=$((count + 1))
-        path="$url"
-        echo "Uploading file: $url"
-        curl -u admin:admin123 --upload-file $path http://$url
-
-    done <<< "$(find $server/ -type f)"
-done
diff --git a/bash/tools/creating_data/upload-npm-pkgs.sh b/bash/tools/creating_data/upload-npm-pkgs.sh
deleted file mode 100755
index 9a7ed559..00000000
--- a/bash/tools/creating_data/upload-npm-pkgs.sh
+++ /dev/null
@@ -1,48 +0,0 @@
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-LIST_FILE="$1"
-if [[ -z "$LIST_FILE" ]]; then
-    echo "Mising arg LIST_FILE"
-    exit 1
-fi
-
-DATA_DIR="$2"
-if [[ -z "$DATA_DIR" ]]; then
-    echo "Mising arg DATA_DIR"
-    exit 1
-fi
-
-NEXUS_HOST="$3"
-if [[ -z "$NEXUS_HOST" ]]; then
-    echo "Mising arg NEXUS_HOST"
-    exit 1
-fi
-
-npm config set registry $NEXUS_HOST/repository/npm-private/
-# npm adduser moved to top
-
-cd "$DATA_DIR"
-lines=$(ls *.tgz | wc -l)
-cnt=1
-for line in *.tgz; do
-    echo "== pkg #$cnt of $lines =="
-    # yallist@2.1.2
-    npm publish --access public "${line}"
-    cnt=$((cnt+1))
-done
diff --git a/bash/tools/deploy_kube.sh b/bash/tools/deploy_kube.sh
deleted file mode 100755
index f2a77be1..00000000
--- a/bash/tools/deploy_kube.sh
+++ /dev/null
@@ -1,95 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# fail fast
-set -e
-
-# OS check
-. /etc/os-release
-OS_ID="${ID}"
-
-case "$OS_ID" in
-    centos)
-        ;;
-    rhel)
-        ;;
-    ubuntu)
-        ;;
-    *)
-        echo This OS is not supported: $OS_ID
-        exit 1
-        ;;
-esac
-
-# boilerplate
-RELATIVE_PATH=./ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-message info "Reading configuration"
-get_configuration
-if [ -z "$NODES_IPS" ] ; then
-    get_cfg_val "NODES_IPS" "Enter the public IPv4 addresses of kubernetes nodes separated by space," \
-    "\n(for example: 10.0.0.2 10.0.0.3 ...): "
-fi
-
-echo "Wait for nexus startup (1min)"
-sleep 60
-
-
-# on install server
-deploy_rancher
-deploy_kubernetes "$OS_ID"
-
-echo "Setting up ONAP Local Repo on Kubernetes nodes"
-for node in ${NODES_IPS} ; do
-    enable_remote_repo $node
-done
-
-# setup NFS on nodes
-assort_nodes_ips() {
-    nfs_server="$1"
-    shift
-    nfs_clients="$*"
-}
-assort_nodes_ips ${NODES_IPS}
-if [ -n "${nfs_clients}" ]; then
-    echo "Setting up NFS"
-    remote_setup_nfs_server $OS_ID ${nfs_server} ${nfs_clients}
-    for node in ${nfs_clients} ; do
-        remote_setup_nfs_mount $OS_ID $node ${nfs_server}
-    done
-else
-    echo "Only one node set. Skipping nfs configuration"
-fi
-
-echo "Copy ansible packages for onap ansible-server"
-for node in ${NODES_IPS} ; do
-    upload_ansible_pkgs $OS_ID $node
-done
-
-# to nodes
-for node in ${NODES_IPS} ; do
-    deploy_node $node $OS_ID
-done
diff --git a/bash/tools/deploy_nexus.sh b/bash/tools/deploy_nexus.sh
deleted file mode 100755
index 1532c614..00000000
--- a/bash/tools/deploy_nexus.sh
+++ /dev/null
@@ -1,194 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# fail fast
-set -e
-
-# OS check
-. /etc/os-release
-OS_ID="${ID}"
-
-case "$OS_ID" in
-    centos)
-        ;;
-    rhel)
-        ;;
-    ubuntu)
-        ;;
-    *)
-        echo This OS is not supported: $OS_ID
-        exit 1
-        ;;
-esac
-
-# boilerplate
-RELATIVE_PATH=./ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-#
-# local functions
-#
-
-start_nexus() {
-    echo "** Starting nexus **"
-    if [[ -z "$NEXUS_DATA" ]]; then
-        echo "Nexus data env is not set"
-        exit -3
-    fi
-
-    # valid for case of fresh nexus deployment
-    # data are inserted in later phases
-    mkdir -p $NEXUS_DATA
-    # hardening
-    chmod a+wrX $NEXUS_DATA
-    chown -R 200:200 $NEXUS_DATA
-
-    docker rm -f nexus 1> /dev/null 2>&1 || true
-
-    docker run -d --name nexus\
-        --restart unless-stopped \
-        -v $NEXUS_DATA:/nexus-data:rw \
-        sonatype/nexus3
-
-    echo "** Creating docker network **"
-    docker network create nexus_network
-    docker network connect nexus_network nexus
-}
-
-start_nginx() {
-    echo "** Starting reverse proxy - nginx **"
-
-    docker rm -f nginx 1> /dev/null 2>&1 || true
-    mkdir -p $NGINX_HTTP_DIR/repo.install-server
-
-    mkdir -p "$NGINX_HTTP_DIR/repo.install-server"
-
-    docker run -d -p 80:80 -p 443:443 -p 10001:443 \
-        --name nginx \
-        --network nexus_network \
-        -v $GEN_CFG_PATH/nginx.conf:/etc/nginx/nginx.conf:ro \
-        -v $CERTS_TARGET_PATH:/etc/nginx/certs:ro \
-        -v $GIT_REPOS:/srv/git:rw \
-        -v $NGINX_LOG_DIR:/var/log/nginx:rw \
-        -v $NGINX_HTTP_DIR:/srv/http:ro \
-        -v $RHEL_REPO:/srv/http/repo.install-server:ro \
-        --restart unless-stopped \
-        own_nginx
-}
-
-patch_cert() {
-    file=$1
-    cp "$APROJECT_DIR/cfg/$file" "$GEN_CFG_PATH/$file"
-#    sed "s#countryName =.*#countryName = $CERT_COUNTRY#" "$APROJECT_DIR/cfg/$file" > $GEN_CFG_PATH/$file
-#    sed "s#localityName =.*#localityName = $CERT_LOCALITY#" "$APROJECT_DIR/cfg/$file" > $GEN_CFG_PATH/$file
-#    sed "s#organizationName =.*#organizationName = $CERT_ORGANIZATION#" "$APROJECT_DIR/cfg/$file" > $GEN_CFG_PATH/$file
-}
-
-patch_conf_files() {
-    # patch nexus and root cert
-    patch_cert nexus_cert.cnf
-    patch_cert cacert.cnf
-
-    # patch nexus v3 ext cert
-    sed "s#nexus.student12#$NEXUS_FQDN#" "$APROJECT_DIR/cfg/v3.ext" > $GEN_CFG_PATH/v3.ext
-
-    #patch nginx.conf
-    sed "s#nexus.student12#$NEXUS_FQDN#" "$APROJECT_DIR/cfg/nginx.conf" > $GEN_CFG_PATH/nginx.conf
-}
-
-#
-# body
-#
-
-message info "Nexus will be installed into this directory: $(pwd)"
-
-if ! [ -f ./local_repo.conf ]; then
-    printf "[?] > Do you want continue? (if no, hit CTRL+C): "
-    read x
-fi
-
-message info "Reading configuration"
-get_configuration
-
-mkdir -p "$CERTS_TARGET_PATH"
-mkdir -p "$NGINX_LOG_DIR"
-mkdir -p "$GEN_CFG_PATH"
-if [ "$IS_SELF_EXTRACT" = YES ] ; then
-    message info "Now I will untar the resources"
-    message info "This may take a long time..."
-    sleep 3s
-    may_self_extract
-fi
-
-#
-echo "Cleanup docker (if installed)"
-docker rm -f nginx 1> /dev/null 2>&1 || true
-docker rm -f nexus 1> /dev/null 2>&1 || true
-
-install_files
-install_packages "$OS_ID"
-setup_vnc_server
-
-update_hosts
-
-# TODO
-#check_dependencies
-
-echo "Restarting dnsmasq"
-# TODO dnsmasq config?
-systemctl enable dnsmasq
-systemctl restart dnsmasq
-
-echo "** Generating config files to $GEN_CFG_PATH **"
-echo "Configure ssl certificates"
-
-patch_conf_files
-create_root_CA
-
-# create selfinstall CA cert
-$BASH_SCRIPTS_DIR/tools/create_si_cacert_pkg.sh
-# run generated file
-./install_cacert.sh
-
-create_cert "nexus"
-
-echo "** Certificates finished **"
-
-update_docker_cfg
-
-echo "Restarting docker"
-systemctl enable docker
-systemctl restart docker
-
-update_firewall
-
-set +e
-
-echo "** Loading images **"
-docker load -i $RESOURCES_DIR/offline_data/docker_images_infra/sonatype_nexus3_latest.tar
-docker load -i $RESOURCES_DIR/offline_data/docker_images_infra/own_nginx_latest.tar
-
-start_nexus
-start_nginx
diff --git a/bash/tools/gather_data_lists.sh b/bash/tools/gather_data_lists.sh
deleted file mode 100755
index 3e046cbe..00000000
--- a/bash/tools/gather_data_lists.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-script_dir="$(dirname ${BASH_SOURCE[0]})"
-tools=$(readlink -f "$script_dir")
-
-echo "WARNING: This script won't be used except rare internal usage, it's just illustrating how we collected lists of artifacts to be downloaded. It's already deprecated"
-
-TOOLS="$tools/creating_data"
-export LISTS_DIR="$tools/data_list"
-export ONAP_SERVERS="oom-beijing-postRC2-master oom-beijing-postRC2-compute1 oom-beijing-postRC2-compute2"
-OOM_PATH="$tools/../../resources/oom"
-
-$TOOLS/remote-list-gathering.sh
-$TOOLS/make-git-http-list.sh "$OOM_PATH"
-
-
diff --git a/bash/tools/load_stored_offline_data.sh b/bash/tools/load_stored_offline_data.sh
deleted file mode 100755
index c04e9893..00000000
--- a/bash/tools/load_stored_offline_data.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /usr/bin/env bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-# boilerplate
-RELATIVE_PATH=./ # relative path from this script to 'common-functions.sh'
-if [ "$IS_COMMON_FUNCTIONS_SOURCED" != YES ] ; then
-    SCRIPT_DIR=$(dirname "${0}")
-    LOCAL_PATH=$(readlink -f "$SCRIPT_DIR")
-    . "${LOCAL_PATH}"/"${RELATIVE_PATH}"/common-functions.sh
-fi
-
-tools="${LOCAL_PATH}"
-message info "Reading configuration"
-get_configuration
-
-CTOOLS="$tools/creating_data"
-LISTS_DIR="$tools/data_list"
-DATA_DIR="$tools/../../resources/offline_data"
-export NEXUS_HOST="https://$NEXUS_FQDN"
-NPM_REGISTRY="$NEXUS_HOST/repository/npm-private/"
-
-TOTAL=5
-CURR=1
-
-message info "Loading started: $(date)"
-
-# backup config.json before we change it in docker-login
-# however no use for restoring it found
-mv ~/.docker/config.json ~/.docker/config.json_backup 2>/dev/null
-
-echo "[Step $((CURR++))/$TOTAL Setting-up docker login for inserting docker images]"
-$CTOOLS/docker-login.sh
-
-echo "[Step $((CURR++))/$TOTAL Inserting docker images into local nexus]"
-$CTOOLS/load-docker-images.sh "$DATA_DIR/docker_images_for_nexus"
-
-echo "[Step $((CURR++))/$TOTAL Setting-up npm for inserting npm pkgs into local nexus]"
-
-npm config set registry $NPM_REGISTRY
-
-/usr/bin/expect <<EOF
-spawn npm login
-expect "Username:"
-send "${NPM_USERNAME}\n"
-expect "Password:"
-send "${NPM_PASSWORD}\n"
-expect Email:
-send "${NPM_EMAIL}\n"
-expect eof
-EOF
-
-echo "[WA] for tss package - this package uses already specified repo and dont accept our simulated domain"
-
-cd $DATA_DIR/npm_tar
-tar xvzf tsscmp-1.0.5.tgz
-rm -f tsscmp-1.0.5.tgz
-sed -i "s|https://registry.npmjs.org|${NPM_REGISTRY}|g" package/package.json
-tar -zcvf tsscmp-1.0.5.tgz package
-rm -rf package
-cd -
-
-echo "[Step $((CURR++))/$TOTAL Inserting npm packages into local nexus]"
-$CTOOLS/upload-npm-pkgs.sh "$LISTS_DIR/npm_list.txt" "$DATA_DIR/npm_tar" "$NEXUS_HOST"
-
-# onap is using different credentials for docker login which can be conflicted
-# with ours so better to clean this-up
-rm ~/.docker/config.json
-
-message info "Loading finished: $(date)"
diff --git a/bash/tools/setup_nfs_mount.sh b/bash/tools/setup_nfs_mount.sh
deleted file mode 100755
index eee471ba..00000000
--- a/bash/tools/setup_nfs_mount.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-usage () {
-  echo "Usage:"
-  echo "   ./$(basename $0) nfs_master_ip"
-  exit 1
-}
-
-if [ "$#" -ne 1 ]; then
-  echo "Missing NFS mater node"
-  usage
-fi
-
-MASTER_IP=$1
-
-#Install NFS common
-#sudo apt-get update
-#sudo apt-get install -y nfs-common
-
-#Create NFS directory
-sudo mkdir -p /dockerdata-nfs
-
-#Mount the remote NFS directory to the local one
-sudo mount $MASTER_IP:/dockerdata-nfs /dockerdata-nfs/
-echo "$MASTER_IP:/dockerdata-nfs /dockerdata-nfs  nfs auto,nofail,noatime,nolock,intr,tcp,actimeo=1800 0 0" | sudo tee -a /etc/fstab
diff --git a/bash/tools/setup_nfs_server_rhel.sh b/bash/tools/setup_nfs_server_rhel.sh
deleted file mode 100755
index 24fe2b59..00000000
--- a/bash/tools/setup_nfs_server_rhel.sh
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-usage () {
-  echo "Usage:"
-  echo "   ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
-  exit 1
-}
-
-if [ "$#" -lt 1 ]; then
-  echo "Missing NFS slave nodes"
-  usage
-fi
-
-#Install NFS kernel
-#sudo apt-get update
-#sudo apt-get install -y nfs-kernel-server
-
-#Create /dockerdata-nfs and set permissions
-sudo mkdir -p /dockerdata-nfs
-sudo chmod 777 -R /dockerdata-nfs
-sudo chown nobody:nobody /dockerdata-nfs/
-
-#Update the /etc/exports
-NFS_EXP=""
-for i in $@; do
-  NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
-done
-echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
-
-#Restart the NFS service
-sudo exportfs -a
-sudo systemctl restart nfs-server
diff --git a/bash/tools/setup_nfs_server_ubuntu.sh b/bash/tools/setup_nfs_server_ubuntu.sh
deleted file mode 100755
index fad3abbd..00000000
--- a/bash/tools/setup_nfs_server_ubuntu.sh
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/bash
-
-#   COPYRIGHT NOTICE STARTS HERE
-#
-#   Copyright 2018 © Samsung Electronics Co., Ltd.
-#
-#   Licensed under the Apache License, Version 2.0 (the "License");
-#   you may not use this file except in compliance with the License.
-#   You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-#   Unless required by applicable law or agreed to in writing, software
-#   distributed under the License is distributed on an "AS IS" BASIS,
-#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#   See the License for the specific language governing permissions and
-#   limitations under the License.
-#
-#   COPYRIGHT NOTICE ENDS HERE
-
-
-usage () {
-  echo "Usage:"
-  echo "   ./$(basename $0) node1_ip node2_ip ... nodeN_ip"
-  exit 1
-}
-
-if [ "$#" -lt 1 ]; then
-  echo "Missing NFS slave nodes"
-  usage
-fi
-
-#Install NFS kernel
-#sudo apt-get update
-#sudo apt-get install -y nfs-kernel-server
-
-#Create /dockerdata-nfs and set permissions
-sudo mkdir -p /dockerdata-nfs
-sudo chmod 777 -R /dockerdata-nfs
-sudo chown nobody:nogroup /dockerdata-nfs/
-
-#Update the /etc/exports
-NFS_EXP=""
-for i in $@; do
-  NFS_EXP+="$i(rw,sync,no_root_squash,no_subtree_check) "
-done
-echo "/dockerdata-nfs "$NFS_EXP | sudo tee -a /etc/exports
-
-#Restart the NFS service
-sudo exportfs -a
-sudo systemctl restart nfs-kernel-server
diff --git a/build/common-functions.sh b/build/common-functions.sh
new file mode 100755
index 00000000..e39c4778
--- /dev/null
+++ b/build/common-functions.sh
@@ -0,0 +1,92 @@
+#   COPYRIGHT NOTICE STARTS HERE
+#
+#   Copyright 2018 © Samsung Electronics Co., Ltd.
+#
+#   Licensed under the Apache License, Version 2.0 (the "License");
+#   you may not use this file except in compliance with the License.
+#   You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+#   Unless required by applicable law or agreed to in writing, software
+#   distributed under the License is distributed on an "AS IS" BASIS,
+#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#   See the License for the specific language governing permissions and
+#   limitations under the License.
+#
+#   COPYRIGHT NOTICE ENDS HERE
+
+#
+# this file contains shared variables and functions for the onap installer
+#
+
+# any script which needs this file can check this variable
+# and it will know immediately if the functions and variables
+# are loaded and usable
+IS_COMMON_FUNCTIONS_SOURCED=YES
+
+PATH="${PATH}:/usr/local/bin:/usr/local/sbin"
+export PATH
+
+# just self-defense against locale
+LANG=C
+export LANG
+
+# default credentials to the repository
+NEXUS_USERNAME=admin
+NEXUS_PASSWORD=admin123
+NEXUS_EMAIL=admin@onap.org
+
+# this function is intended to unify the installer output
+message() {
+    case "$1" in
+        info)
+            echo 'INFO:' "$@"
+            ;;
+        debug)
+            echo 'DEBUG:' "$@" >&2
+            ;;
+        warning)
+            echo 'WARNING [!]:' "$@" >&2
+            ;;
+        error)
+            echo 'ERROR [!!]:' "$@" >&2
+            return 1
+            ;;
+        *)
+            echo 'UNKNOWN [?!]:' "$@" >&2
+            return 2
+            ;;
+    esac
+    return 0
+}
+export message
+
+# if the environment variable DEBUG is set to DEBUG-ONAP ->
+#  -> this function will print its arguments
+# otherwise nothing is done
+debug() {
+    [ "$DEBUG" = DEBUG-ONAP ] && message debug "$@"
+}
+export debug
+
+fail() {
+    message error "$@"
+    exit 1
+}
+
+retry() {
+    local n=1
+    local max=5
+    while ! "$@"; do
+        if [ $n -lt $max ]; then
+            n=$((n + 1))
+            message warning "Command ${@} failed. Attempt: $n/$max"
+            message info "waiting 10s for another try..."
+            sleep 10s
+        else
+            fail "Command ${@} failed after $n attempts. Better to abort now."
+        fi
+    done
+}
+
diff --git a/bash/tools/creating_data/create_nginx_image/01create-image.sh b/build/creating_data/create_nginx_image/01create-image.sh
index 86d96cf2..86d96cf2 100755
--- a/bash/tools/creating_data/create_nginx_image/01create-image.sh
+++ b/build/creating_data/create_nginx_image/01create-image.sh
diff --git a/bash/tools/creating_data/create_nginx_image/Dockerfile b/build/creating_data/create_nginx_image/Dockerfile
index 412d4edb..6a14f221 100644
--- a/bash/tools/creating_data/create_nginx_image/Dockerfile
+++ b/build/creating_data/create_nginx_image/Dockerfile
@@ -20,13 +20,8 @@ FROM nginx:alpine
 
 RUN apk add --no-cache --update fcgiwrap git git-daemon spawn-fcgi
 
-#RUN mkdir /srv/http
-#VOLUME ["/var/log/nginx"]
-
 COPY gitconfig /etc/
-#COPY nginx.conf /etc/nginx/nginx.conf
 
 CMD spawn-fcgi -M 666 -s /var/run/fcgiwrap.socket /usr/bin/fcgiwrap && \
     nginx -g "daemon off;"
 
-#CMD ["spawn-fcgi","-M 666","-s /var/run/fcgiwrap.socket","/usr/sbin/fcgiwrap"]
diff --git a/bash/tools/creating_data/create_nginx_image/gitconfig b/build/creating_data/create_nginx_image/gitconfig
index 0c6ab113..0c6ab113 100644
--- a/bash/tools/creating_data/create_nginx_image/gitconfig
+++ b/build/creating_data/create_nginx_image/gitconfig
diff --git a/bash/tools/creating_data/download-bin-tools.sh b/build/creating_data/download-bin-tools.sh
index b48cd2df..a0087517 100755
--- a/bash/tools/creating_data/download-bin-tools.sh
+++ b/build/creating_data/download-bin-tools.sh
@@ -34,9 +34,6 @@ download() {
     curl --retry 5 -y 10 -Y 10 --location  "$url" -o "$file"
 }
 
-download "https://github.com/stedolan/jq/releases/download/jq-1.5/jq-linux64"
-mv ./jq-linux64 ./jq
-
 download "https://storage.googleapis.com/kubernetes-release/release/v1.8.10/bin/linux/amd64/kubectl"
 
 download "https://storage.googleapis.com/kubernetes-helm/helm-v2.8.2-linux-amd64.tar.gz"
@@ -48,4 +45,4 @@ tar -xf ./rancher-linux-amd64-v0.6.7.tar.gz ./rancher-v0.6.7/rancher -O > ranche
 rm ./rancher-linux-amd64-v0.6.7.tar.gz
 
 
-chmod a+x ./helm ./jq ./kubectl ./rancher
+chmod a+x ./helm ./kubectl ./rancher
diff --git a/bash/tools/creating_data/download-docker-images.sh b/build/creating_data/download-docker-images.sh
index 121cd5af..121cd5af 100755
--- a/bash/tools/creating_data/download-docker-images.sh
+++ b/build/creating_data/download-docker-images.sh
diff --git a/bash/tools/creating_data/download-files.sh b/build/creating_data/download-files.sh
index 89e2026c..89e2026c 100755
--- a/bash/tools/creating_data/download-files.sh
+++ b/build/creating_data/download-files.sh
diff --git a/bash/tools/creating_data/download-git-repos.sh b/build/creating_data/download-git-repos.sh
index 9d651d93..9d651d93 100755
--- a/bash/tools/creating_data/download-git-repos.sh
+++ b/build/creating_data/download-git-repos.sh
diff --git a/bash/tools/creating_data/download-http-files.sh b/build/creating_data/download-http-files.sh
index 06f41354..06f41354 100755
--- a/bash/tools/creating_data/download-http-files.sh
+++ b/build/creating_data/download-http-files.sh
diff --git a/bash/tools/creating_data/download-npm-pkgs.sh b/build/creating_data/download-npm-pkgs.sh
index 9e8847c9..9e8847c9 100755
--- a/bash/tools/creating_data/download-npm-pkgs.sh
+++ b/build/creating_data/download-npm-pkgs.sh
diff --git a/bash/tools/creating_data/download-oom.sh b/build/creating_data/download-oom.sh
index 010eeec1..010eeec1 100755
--- a/bash/tools/creating_data/download-oom.sh
+++ b/build/creating_data/download-oom.sh
diff --git a/bash/tools/creating_data/download-pip.sh b/build/creating_data/download-pip.sh
index dea60b52..dea60b52 100755
--- a/bash/tools/creating_data/download-pip.sh
+++ b/build/creating_data/download-pip.sh
diff --git a/bash/tools/creating_data/download-pkg.sh b/build/creating_data/download-pkg.sh
index 03bfe07f..03bfe07f 100755
--- a/bash/tools/creating_data/download-pkg.sh
+++ b/build/creating_data/download-pkg.sh
diff --git a/bash/tools/creating_data/make-docker-images-list.sh b/build/creating_data/make-docker-images-list.sh
index b925d91d..b925d91d 100755
--- a/bash/tools/creating_data/make-docker-images-list.sh
+++ b/build/creating_data/make-docker-images-list.sh
diff --git a/bash/tools/creating_data/make-git-http-list.sh b/build/creating_data/make-git-http-list.sh
index a724d6f0..a724d6f0 100755
--- a/bash/tools/creating_data/make-git-http-list.sh
+++ b/build/creating_data/make-git-http-list.sh
diff --git a/bash/tools/creating_data/make-npm-list.sh b/build/creating_data/make-npm-list.sh
index 5901d54d..5901d54d 100755
--- a/bash/tools/creating_data/make-npm-list.sh
+++ b/build/creating_data/make-npm-list.sh
diff --git a/bash/tools/creating_data/remote-list-gathering.sh b/build/creating_data/remote-list-gathering.sh
index 73fb164a..dde1e0f5 100755
--- a/bash/tools/creating_data/remote-list-gathering.sh
+++ b/build/creating_data/remote-list-gathering.sh
@@ -18,7 +18,6 @@
 
 
 if [[ -z "$ONAP_SERVERS" ]]; then
-#    ONAP_SERVERS="oom-beijing-postRC2-master oom-beijing-postRC2-compute1 oom-beijing-postRC2-compute2"
     echo "Missing environment ONAP_SERVERS"
     exit 1
 fi
diff --git a/bash/tools/creating_data/save-docker-images.sh b/build/creating_data/save-docker-images.sh
index f4a5d3c7..f4a5d3c7 100755
--- a/bash/tools/creating_data/save-docker-images.sh
+++ b/build/creating_data/save-docker-images.sh
diff --git a/bash/tools/data_list/docker_image_list.txt b/build/data_list/docker_image_list.txt
index 2a039bc1..2a039bc1 100644
--- a/bash/tools/data_list/docker_image_list.txt
+++ b/build/data_list/docker_image_list.txt
diff --git a/bash/tools/data_list/docker_manual_image_list.txt b/build/data_list/docker_manual_image_list.txt
index c4873487..c4873487 100644
--- a/bash/tools/data_list/docker_manual_image_list.txt
+++ b/build/data_list/docker_manual_image_list.txt
diff --git a/bash/tools/data_list/git_manual_list b/build/data_list/git_manual_list
index 43273678..43273678 100644
--- a/bash/tools/data_list/git_manual_list
+++ b/build/data_list/git_manual_list
diff --git a/bash/tools/data_list/git_repos_list b/build/data_list/git_repos_list
index fbfeaaf5..fbfeaaf5 100644
--- a/bash/tools/data_list/git_repos_list
+++ b/build/data_list/git_repos_list
diff --git a/bash/tools/data_list/http_manual_list.txt b/build/data_list/http_manual_list.txt
index c7486b7f..c7486b7f 100644
--- a/bash/tools/data_list/http_manual_list.txt
+++ b/build/data_list/http_manual_list.txt
diff --git a/bash/tools/data_list/npm_list.txt b/build/data_list/npm_list.txt
index 84528569..84528569 100644
--- a/bash/tools/data_list/npm_list.txt
+++ b/build/data_list/npm_list.txt
diff --git a/bash/tools/data_list/pip_list.txt b/build/data_list/pip_list.txt
index a4b09092..a4b09092 100644
--- a/bash/tools/data_list/pip_list.txt
+++ b/build/data_list/pip_list.txt
diff --git a/bash/tools/data_list/pkg_list.txt b/build/data_list/pkg_list.txt
index 43f5aac5..43f5aac5 100644
--- a/bash/tools/data_list/pkg_list.txt
+++ b/build/data_list/pkg_list.txt
diff --git a/bash/tools/delete-local-images.sh b/build/delete-local-images.sh
index 5e481c31..5e481c31 100755
--- a/bash/tools/delete-local-images.sh
+++ b/build/delete-local-images.sh
diff --git a/bash/tools/download_offline_data_by_lists.sh b/build/download_offline_data_by_lists.sh
index 24cd5789..ff519212 100755
--- a/bash/tools/download_offline_data_by_lists.sh
+++ b/build/download_offline_data_by_lists.sh
@@ -32,7 +32,7 @@ fi
 
 CTOOLS="${LOCAL_PATH}/creating_data"
 LISTS_DIR="${LOCAL_PATH}/data_list"
-DATA_DIR="${LOCAL_PATH}/../../resources"
+DATA_DIR="${LOCAL_PATH}/../resources"
 TOTAL=12
 CURR=1
 
@@ -71,7 +71,7 @@ echo "[Step $((CURR++))/$TOTAL Download rhel pkgs]"
 $CTOOLS/download-pkg.sh "$DATA_DIR/pkg/rhel"
 
 echo "[Step $((CURR++))/$TOTAL Download oom]"
-$CTOOLS/download-oom.sh "$DATA_DIR" "${LOCAL_PATH}/../../patches/offline-changes.patch"
+$CTOOLS/download-oom.sh "$DATA_DIR" "${LOCAL_PATH}/../patches/offline-changes.patch"
 
 echo "[Step $((CURR++))/$TOTAL Download sdnc-ansible-server packages]"
 $CTOOLS/download-pip.sh "$LISTS_DIR/pip_list.txt" "$DATA_DIR/pkg/ubuntu/ansible_pkg"
diff --git a/cfg/cacert.cnf b/cfg/cacert.cnf
deleted file mode 100644
index a6917ca9..00000000
--- a/cfg/cacert.cnf
+++ /dev/null
@@ -1,113 +0,0 @@
-[ ca ]
-# `man ca`
-default_ca = CA_default
-
-[ CA_default ]
-# Directory and file locations.
-dir               = ./
-certs             = $dir/certs
-crl_dir           = $dir/crl
-new_certs_dir     = $dir/newcerts
-database          = $dir/index.txt
-serial            = $dir/serial
-RANDFILE          = $dir/private/.rand
-
-# The root key and root certificate.
-private_key       = $dir/private/ca.key.pem
-certificate       = $dir/certs/ca.cert.pem
-
-# For certificate revocation lists.
-crlnumber         = $dir/crlnumber
-crl               = $dir/crl/ca.crl.pem
-crl_extensions    = crl_ext
-default_crl_days  = 30
-
-# SHA-1 is deprecated, so use SHA-2 instead.
-default_md        = sha256
-
-name_opt          = ca_default
-cert_opt          = ca_default
-default_days      = 3750
-preserve          = no
-policy            = policy_strict
-
-[ policy_strict ]
-# The root CA should only sign intermediate certificates that match.
-# See the POLICY FORMAT section of `man ca`.
-countryName             = match
-organizationName        = match
-commonName              = supplied
-
-[ policy_loose ]
-# Allow the intermediate CA to sign a more diverse range of certificates.
-# See the POLICY FORMAT section of the `ca` man page.
-countryName             = optional
-localityName            = optional
-organizationName        = optional
-commonName              = supplied
-
-[ req ]
-# Options for the `req` tool (`man req`).
-default_bits        = 4096
-distinguished_name  = req_distinguished_name
-string_mask         = utf8only
-prompt              = no
-
-# SHA-1 is deprecated, so use SHA-2 instead.
-default_md          = sha256
-
-# Extension to add when the -x509 option is used.
-x509_extensions     = v3_ca
-
-[ req_distinguished_name ]
-# Optionally, specify some defaults.
-countryName             = PL
-localityName            = Krakow
-organizationName        = Samsung
-commonName              = onap
-
-[ v3_ca ]
-# Extensions for a typical CA (`man x509v3_config`).
-subjectKeyIdentifier = hash
-authorityKeyIdentifier = keyid:always,issuer
-basicConstraints = critical, CA:true
-keyUsage = critical, digitalSignature, cRLSign, keyCertSign
-
-[ v3_intermediate_ca ]
-# Extensions for a typical intermediate CA (`man x509v3_config`).
-subjectKeyIdentifier = hash
-authorityKeyIdentifier = keyid:always,issuer
-basicConstraints = critical, CA:true, pathlen:0
-keyUsage = critical, digitalSignature, cRLSign, keyCertSign
-
-[ usr_cert ]
-# Extensions for client certificates (`man x509v3_config`).
-basicConstraints = CA:FALSE
-nsCertType = client, email
-nsComment = "OpenSSL Generated Client Certificate"
-subjectKeyIdentifier = hash
-authorityKeyIdentifier = keyid,issuer
-keyUsage = critical, nonRepudiation, digitalSignature, keyEncipherment
-extendedKeyUsage = clientAuth, emailProtection
-
-[ server_cert ]
-# Extensions for server certificates (`man x509v3_config`).
-basicConstraints = CA:FALSE
-nsCertType = server
-nsComment = "OpenSSL Generated Server Certificate"
-subjectKeyIdentifier = hash
-authorityKeyIdentifier = keyid,issuer:always
-keyUsage = critical, digitalSignature, keyEncipherment
-extendedKeyUsage = serverAuth
-
-[ crl_ext ]
-# Extension for CRLs (`man x509v3_config`).
-authorityKeyIdentifier=keyid:always
-
-[ ocsp ]
-# Extension for OCSP signing certificates (`man ocsp`).
-basicConstraints = CA:FALSE
-subjectKeyIdentifier = hash
-authorityKeyIdentifier = keyid,issuer
-keyUsage = critical, digitalSignature
-extendedKeyUsage = critical, OCSPSigning
diff --git a/cfg/full_depl_values.yaml b/cfg/full_depl_values.yaml
deleted file mode 100644
index b16354e9..00000000
--- a/cfg/full_depl_values.yaml
+++ /dev/null
@@ -1,158 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration overrides.
-#
-# These overrides will affect all helm charts (ie. applications)
-# that are listed below and are 'enabled'.
-#################################################################
-global:
-  # Change to an unused port prefix range to prevent port conflicts
-  # with other instances running within the same k8s cluster
-  nodePortPrefix: 302
-
-  # ONAP Repository
-  # Uncomment the following to enable the use of a single docker
-  # repository but ONLY if your repository mirrors all ONAP
-  # docker images. This includes all images from dockerhub and
-  # any other repository that hosts images for ONAP components.
-  #repository: nexus3.onap.org:10001
-  repositoryCred:
-    user: docker
-    password: docker
-
-  # readiness check - temporary repo until images migrated to nexus3
-  readinessRepository: oomk8s
-  # logging agent - temporary repo until images migrated to nexus3
-  loggingRepository: docker.elastic.co
-
-  # image pull policy
-  #pullPolicy: Always
-  pullPolicy: IfNotPresent
-
-  # default mount path root directory referenced
-  # by persistent volumes and log files
-  persistence:
-    mountPath: /dockerdata-nfs
-
-  # flag to enable debugging - application support required
-  debugEnabled: false
-
-# Repository for creation of nexus3.onap.org secret
-repository: nexus3.onap.org:10001
-
-
-#################################################################
-# Enable/disable and configure helm charts (ie. applications)
-# to customize the ONAP deployment.
-#################################################################
-aaf:
-  enabled: true
-aai:
-  enabled: true
-appc:
-  enabled: true
-  config:
-    openStackType: OpenStackProvider
-    openStackName: OpenStack
-    openStackKeyStoneUrl: FILL-ME
-    openStackServiceTenantName: FILL-ME
-    openStackDomain: FILL-ME
-    openStackUserName: FILL-ME
-    openStackEncryptedPassword: FILL-ME
-clamp:
-  enabled: true
-cli:
-  enabled: true
-consul:
-  enabled: true
-dcaegen2:
-  enabled: true
-dmaap:
-  enabled: true
-esr:
-  enabled: true
-log:
-  enabled: true
-sniro-emulator:
-  enabled: true
-oof:
-  enabled: true
-msb:
-  enabled: true
-multicloud:
-  enabled: true
-nbi:
-  enabled: true
-  config:
-    # openstack configuration
-    openStackUserName: "FILL-ME"
-    openStackRegion: "FILL-ME"
-    openStackKeyStoneUrl: "FILL-ME"
-    openStackServiceTenantName: "FILL-ME"
-    openStackEncryptedPasswordHere: "FILL-ME"
-policy:
-  enabled: true
-portal:
-  enabled: true
-robot:
-  enabled: true
-sdc:
-  enabled: true
-sdnc:
-  enabled: true
-
-  replicaCount: 1
-
-  config:
-    enableClustering: false
-
-  mysql:
-    disableNfsProvisioner: true
-    replicaCount: 1
-so:
-  enabled: true
-
-  replicaCount: 1
-
-  liveness:
-    # necessary to disable liveness probe when setting breakpoints
-    # in debugger so K8s doesn't restart unresponsive container
-    enabled: true
-
-  # so server configuration
-  config:
-    # message router configuration
-    dmaapTopic: "AUTO"
-    # openstack configuration
-    openStackUserName: "FILL-ME"
-    openStackRegion: "FILL-ME"
-    openStackKeyStoneUrl: "FILL-ME"
-    openStackServiceTenantName: "FILL-ME"
-    openStackEncryptedPasswordHere: "FILL-ME"
-
-  # configure embedded mariadb
-  mariadb:
-    config:
-      mariadbRootPassword: password
-uui:
-  enabled: true
-vfc:
-  enabled: true
-vid:
-  enabled: true
-vnfsdk:
-  enabled: true
-
diff --git a/cfg/nexus_cert.cnf b/cfg/nexus_cert.cnf
deleted file mode 100644
index ab8d5477..00000000
--- a/cfg/nexus_cert.cnf
+++ /dev/null
@@ -1,33 +0,0 @@
-[ req ]
-default_bits        = 4096
-default_keyfile     = server-key.pem
-distinguished_name  = dn
-#req_extensions      = v3_req
-x509_extensions     = v3_req
-string_mask         = utf8only
-prompt              = no
-default_md          = sha256
-
-[ dn ]
-
-countryName = PL
-localityName = Krakow
-organizationName = Samsung
-commonName = registry-1.docker.io
-#emailAddress
-
-[ v3_req ]
-
-#subjectKeyIdentifier        = hash
-#authorityKeyIdentifier  = keyid,issuer
-
-basicConstraints        = CA:FALSE
-keyUsage            = critical, keyAgreement, nonRepudiation, digitalSignature, keyEncipherment
-extendedKeyUsage    = serverAuth
-# does not work here because of bug in openssl
-#subjectAltName          = @alternate_names
-nsComment           = "OpenSSL Generated Certificate"
-
-#[ alternate_names ]
-
-#DNS.4       = ftp.example.com
diff --git a/cfg/nginx.conf b/cfg/nginx.conf
deleted file mode 100644
index 7317d3f2..00000000
--- a/cfg/nginx.conf
+++ /dev/null
@@ -1,110 +0,0 @@
-worker_processes 2;
-
-events {
-    worker_connections 1024;
-}
-
-http {
-    error_log /var/log/nginx/error.log debug;
-    access_log /var/log/nginx/access.log;
-
-    proxy_intercept_errors on;
-    proxy_send_timeout 120;
-    proxy_read_timeout 300;
-
-    upstream nexus {
-        server nexus:8081;
-    }
-
-    upstream registry {
-        server nexus:8082;
-    }
-
-# http simulations
-    server {
-        listen 80;
-        listen 443 ssl;
-        server_name _;
-        ssl_certificate         /etc/nginx/certs/nexus_server.crt;
-        ssl_certificate_key     /etc/nginx/certs/nexus_server.key;
-
-        keepalive_timeout  5 5;
-
-        location / {
-            root   /srv/http/$host;
-            index  index.html;
-        }
-    }
-
-# nexus simulations
-    server {
-        listen 80;
-        listen 443 ssl;
-        server_name nexus.student12 gcr.io registry-1.docker.io docker.io registry.npmjs.org nexus3.onap.org docker.elastic.co registry.hub.docker.com;
-        ssl_certificate         /etc/nginx/certs/nexus_server.crt;
-        ssl_certificate_key     /etc/nginx/certs/nexus_server.key;
-
-        keepalive_timeout  5 5;
-        proxy_buffering    off;
-
-        # allow large uploads
-        client_max_body_size 3G;
-
-        location /maven2 {
-            rewrite /maven2/(.*) /repository/maven2/$1  break;
-            # redirect to docker registry
-            proxy_pass http://nexus;
-            proxy_set_header Host $host;
-            proxy_set_header X-Real-IP $remote_addr;
-            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        }
-
-        location / {
-            # redirect to docker registry
-            if ($http_user_agent ~ docker ) {
-                proxy_pass http://registry;
-            }
-            proxy_pass http://nexus;
-            proxy_set_header Host $host;
-            proxy_set_header X-Real-IP $remote_addr;
-            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
-        }
-    }
-
-# git simulations
-    server {
-        listen 80;
-        listen 443 ssl;
-        server_name gerrit.onap.org git.rancher.io github.com;
-        ssl_certificate         /etc/nginx/certs/nexus_server.crt;
-        ssl_certificate_key     /etc/nginx/certs/nexus_server.key;
-
-        keepalive_timeout  5 5;
-        proxy_buffering    off;
-
-        location / {
-              try_files $uri $uri/ @git;
-        }
-
-        location @git {
-
-            # Set chunks to unlimited, as the body's can be huge
-            client_max_body_size            0;
-
-            fastcgi_param   SCRIPT_FILENAME     /usr/libexec/git-core/git-http-backend;
-            fastcgi_param   QUERY_STRING        $args;
-            fastcgi_param   HTTP_HOST           $server_name;
-            fastcgi_param   PATH_INFO           $uri;
-
-            include fastcgi_params;
-
-            fastcgi_param   GIT_HTTP_EXPORT_ALL "";
-            fastcgi_param   GIT_PROJECT_ROOT    /srv/git/$host/;
-
-            # Forward REMOTE_USER as we want to know when we are authenticated
-            fastcgi_param               REMOTE_USER $remote_user;
-
-            fastcgi_pass unix:/var/run/fcgiwrap.socket;
-        }
-    }
-}
diff --git a/cfg/v3.ext b/cfg/v3.ext
deleted file mode 100644
index b4a6e433..00000000
--- a/cfg/v3.ext
+++ /dev/null
@@ -1,24 +0,0 @@
-authorityKeyIdentifier=keyid,issuer
-basicConstraints=CA:FALSE
-keyUsage = digitalSignature, nonRepudiation, keyEncipherment, dataEncipherment
-subjectAltName = @alt_names
-
-[alt_names]
-DNS.1 = nexus.student12
-DNS.2 = gcr.io
-DNS.3 = git.rancher.io
-DNS.4 = gerrit.onap.org
-DNS.5 = registry-1.docker.io
-DNS.6 = docker.io
-DNS.7 = registry.npmjs.org
-DNS.8 = nexus3.onap.org
-DNS.9 = nexus.onap.org
-DNS.10 = docker.elastic.co
-DNS.11 = www.getcloudify.org
-DNS.12 = registry.hub.docker.com
-DNS.13 = github.com
-DNS.14 = repo.maven.apache.org
-DNS.15 = www.springframework.org
-DNS.16 = repo1.maven.org
-DNS.17 = git.onap.org
-