commiting resource limit for onap-aaf component

cleaning up merge conflict
implementing template
reducing overly large resource limits
adding limits to aaf-sms.

Issue-ID: OOM-1146

Change-Id: Idac679dc9be94ab92ea95c38f9f237af65307131
Signed-off-by: dsingh.278 <dsingh.278@gmail.com>
Signed-off-by: Mandeep Khinda <mandeep.khinda@amdocs.com>

15 files changed, 233 insertions, 237 deletions

diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml
index 1cd5cb4a26..a149f0656f 100644
--- a/kubernetes/aaf/charts/aaf-cm/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cm/values.yaml
@@ -19,13 +19,14 @@ global:
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
+flavor: small
 
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_cm:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -65,21 +66,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 800Mi
+    requests:
+      cpu: 20m
+      memory: 500Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1Gi
+    requests:
+      cpu: 40m
+      memory: 600Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml
index 83eaf15e38..73dac29fab 100644
--- a/kubernetes/aaf/charts/aaf-cs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-cs/values.yaml
@@ -17,7 +17,7 @@
 #################################################################
 global:
   nodePortPrefix: 302
-
+flavor: small
 
 #################################################################
 # Application configuration defaults.
@@ -71,21 +71,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 10000Mi
+    requests:
+      cpu: 10m
+      memory: 8500Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 12000Mi
+    requests:
+      cpu: 40m
+      memory: 9000Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml
index f484883f71..0e3a81a9c6 100644
--- a/kubernetes/aaf/charts/aaf-fs/values.yaml
+++ b/kubernetes/aaf/charts/aaf-fs/values.yaml
@@ -19,13 +19,13 @@ global:
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_fs:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -65,21 +65,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 600Mi
+    requests:
+      cpu: 10m
+      memory: 300Mi
+  large:
+    limits:
+      cpu: 500m
+      memory: 700Mi
+    requests:
+      cpu: 100m
+      memory: 400Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml
index 92faa6c564..5665d1df4f 100644
--- a/kubernetes/aaf/charts/aaf-gui/values.yaml
+++ b/kubernetes/aaf/charts/aaf-gui/values.yaml
@@ -19,13 +19,13 @@ global:
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_gui:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -66,21 +66,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 100m
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 200m
+      memory: 1Gi
+    requests:
+      cpu: 100m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml
index 27f59d1802..6fcf861420 100644
--- a/kubernetes/aaf/charts/aaf-hello/values.yaml
+++ b/kubernetes/aaf/charts/aaf-hello/values.yaml
@@ -25,7 +25,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_hello:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -65,21 +65,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1Gi
+    requests:
+      cpu: 20m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml
index 86d67fc431..c9240025f1 100644
--- a/kubernetes/aaf/charts/aaf-locate/values.yaml
+++ b/kubernetes/aaf/charts/aaf-locate/values.yaml
@@ -23,13 +23,13 @@ global:
 # If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines.
 #  persistence:
 #    mountPath: /dockerdata
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_locate:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -69,21 +69,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 600Mi
+    requests:
+      cpu: 20m
+      memory: 300Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1Gi
+    requests:
+      cpu: 40m
+      memory: 500Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml
index c349814f16..943ad16109 100644
--- a/kubernetes/aaf/charts/aaf-oauth/values.yaml
+++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml
@@ -19,13 +19,13 @@ global:
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_oauth:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -65,21 +65,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 400Mi
+    requests:
+      cpu: 20m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 600Mi
+    requests:
+      cpu: 40m
+      memory: 200Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml
index 3e0ed61711..5ad31ffdda 100644
--- a/kubernetes/aaf/charts/aaf-service/values.yaml
+++ b/kubernetes/aaf/charts/aaf-service/values.yaml
@@ -19,13 +19,13 @@ global:
   nodePortPrefix: 302
   readinessRepository: oomk8s
   readinessImage: readiness-check:2.0.0
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/aaf_service:2.1.2-SNAPSHOT
+image: onap/aaf/aaf_service:2.1.1
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -66,21 +66,20 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 600Mi
+    requests:
+      cpu: 20m
+      memory: 300Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1Gi
+    requests:
+      cpu: 40m
+      memory: 300Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
index 5eb7b330ba..0a83e85012 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml
@@ -47,7 +47,7 @@ spec:
           - mountPath: /quorumclient/auth
             name: {{ include "common.fullname" . }}-auth
         resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
         {{- if .Values.nodeSelector }}
         nodeSelector:
 {{ toYaml .Values.nodeSelector | indent 10 }}
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
index c5fd489f31..d6ac1cb881 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml
@@ -28,7 +28,7 @@ global:
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/smsquorumclient:2.0.0
+image: onap/aaf/smsquorumclient:latest
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -54,21 +54,22 @@ persistence:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 10Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 700Mi
+    requests:
+      cpu: 10m
+      memory: 100Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
index ddfc7c61d0..ab0ad17b85 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml
@@ -45,7 +45,8 @@ spec:
         - mountPath: /etc/localtime
           name: localtime
           readOnly: true
-
+        resources:
+{{ include "common.resources" . | indent 10 }}
       - image: "{{ include "common.repository" . }}/{{ .Values.image.consul }}"
         name: {{ include "common.name" . }}-backend
         imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
@@ -62,6 +63,8 @@ spec:
         - mountPath: /etc/localtime
           name: localtime
           readOnly: true
+        resources:
+{{ include "common.resources" . | indent 10 }}
       volumes:
         - name: {{ include "common.fullname" . }}-consuldata
           persistentVolumeClaim:
diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
index 317abcda08..58017bdf40 100644
--- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml
@@ -90,21 +90,22 @@ service:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+flavor: small
+
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 10Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 700Mi
+    requests:
+      cpu: 10m
+      memory: 100Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
index 189cc0d57d..ed24f67d44 100644
--- a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml
@@ -81,7 +81,7 @@ spec:
           - mountPath: /sms/auth
             name: {{ include "common.fullname" . }}-auth
         resources:
-{{ include "common.resources" . | indent 12 }}
+{{ include "common.resources" . | indent 10 }}
         {{- if .Values.nodeSelector }}
         nodeSelector:
 {{ toYaml .Values.nodeSelector | indent 10 }}
diff --git a/kubernetes/aaf/charts/aaf-sms/values.yaml b/kubernetes/aaf/charts/aaf-sms/values.yaml
index b75038c973..7a25581908 100644
--- a/kubernetes/aaf/charts/aaf-sms/values.yaml
+++ b/kubernetes/aaf/charts/aaf-sms/values.yaml
@@ -22,13 +22,13 @@ global:
   loggingRepository: docker.elastic.co
   loggingImage: beats/filebeat:5.5.0
   persistence: {}
-
+flavor: small
 #################################################################
 # Application configuration defaults.
 #################################################################
 # application image
 repository: nexus3.onap.org:10001
-image: onap/aaf/sms:2.0.0
+image: onap/aaf/sms:latest
 pullPolicy: Always
 
 # flag to enable debugging - application support required
@@ -84,21 +84,20 @@ persistence:
 ingress:
   enabled: false
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 200m
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 10Mi
+  large:
+    limits:
+      cpu: 400m
+      memory: 1Gi
+    requests:
+      cpu: 10m
+      memory: 100Mi
+  unlimited: {}
\ No newline at end of file
diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml
index c8f048438b..931a31dc65 100644
--- a/kubernetes/aaf/values.yaml
+++ b/kubernetes/aaf/values.yaml
@@ -23,7 +23,6 @@ global:
   ubuntuInitImage: oomk8s/ubuntu-init:2.0.0
   persistence:
     enabled: true
-
 #################################################################
 # Application configuration defaults.
 #################################################################
@@ -38,8 +37,9 @@ config:
   csServiceName: aaf-cass
   # gerrit branch where the latest aaf/auth/sample/public code exists
   gerritProject: http://gerrit.onap.org/r/aaf/authz.git
-  gerritBranch: master
+  gerritBranch: 2.0.0-ONAP
 
+flavor: small
 # default number of instances
 replicaCount: 1
 
@@ -83,21 +83,20 @@ persistence:
   mountPath: /dockerdata-nfs
   mountSubPath: aaf/data
 
-resources: {}
-  # We usually recommend not to specify default resources and to leave this as a conscious
-  # choice for the user. This also increases chances charts run on environments with little
-  # resources, such as Minikube. If you do want to specify resources, uncomment the following
-  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
-  #
-  # Example:
-  # Configure resource requests and limits
-  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
-  # Minimum memory for development is 2 CPU cores and 4GB memory
-  # Minimum memory for production is 4 CPU cores and 8GB memory
-#resources:
-#  limits:
-#    cpu: 2
-#    memory: 4Gi
-#  requests:
-#    cpu: 2
-#    memory: 4Gi
+# Configure resource requests and limits
+resources:
+  small:
+    limits:
+      cpu: 2
+      memory: 3Gi
+    requests:
+      cpu: 2
+      memory: 3Gi
+  large:
+    limits:
+      cpu: 4
+      memory: 6Gi
+    requests:
+      cpu: 4
+      memory: 6Gi
+  unlimited: {}