From 64a34bf8658fe63a6d7176273e835ba2a4118d0b Mon Sep 17 00:00:00 2001 From: "dsingh.278" Date: Fri, 21 Sep 2018 05:11:00 -0400 Subject: commiting resource limit for onap-aaf component cleaning up merge conflict implementing template reducing overly large resource limits adding limits to aaf-sms. Issue-ID: OOM-1146 Change-Id: Idac679dc9be94ab92ea95c38f9f237af65307131 Signed-off-by: dsingh.278 Signed-off-by: Mandeep Khinda --- kubernetes/aaf/charts/aaf-cm/values.yaml | 38 ++++++++++----------- kubernetes/aaf/charts/aaf-cs/values.yaml | 37 ++++++++++---------- kubernetes/aaf/charts/aaf-fs/values.yaml | 39 +++++++++++----------- kubernetes/aaf/charts/aaf-gui/values.yaml | 39 +++++++++++----------- kubernetes/aaf/charts/aaf-hello/values.yaml | 37 ++++++++++---------- kubernetes/aaf/charts/aaf-locate/values.yaml | 39 +++++++++++----------- kubernetes/aaf/charts/aaf-oauth/values.yaml | 39 +++++++++++----------- kubernetes/aaf/charts/aaf-service/values.yaml | 39 +++++++++++----------- .../templates/statefulset.yaml | 2 +- .../charts/aaf-sms-quorumclient/values.yaml | 39 +++++++++++----------- .../aaf-sms-vault/templates/statefulset.yaml | 5 ++- .../aaf-sms/charts/aaf-sms-vault/values.yaml | 37 ++++++++++---------- .../aaf/charts/aaf-sms/templates/deployment.yaml | 2 +- kubernetes/aaf/charts/aaf-sms/values.yaml | 39 +++++++++++----------- kubernetes/aaf/values.yaml | 39 +++++++++++----------- 15 files changed, 233 insertions(+), 237 deletions(-) (limited to 'kubernetes') diff --git a/kubernetes/aaf/charts/aaf-cm/values.yaml b/kubernetes/aaf/charts/aaf-cm/values.yaml index 1cd5cb4a26..a149f0656f 100644 --- a/kubernetes/aaf/charts/aaf-cm/values.yaml +++ b/kubernetes/aaf/charts/aaf-cm/values.yaml @@ -19,13 +19,14 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_cm:2.1.2-SNAPSHOT +image: onap/aaf/aaf_cm:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 800Mi + requests: + cpu: 20m + memory: 500Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 600Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-cs/values.yaml b/kubernetes/aaf/charts/aaf-cs/values.yaml index 83eaf15e38..73dac29fab 100644 --- a/kubernetes/aaf/charts/aaf-cs/values.yaml +++ b/kubernetes/aaf/charts/aaf-cs/values.yaml @@ -17,7 +17,7 @@ ################################################################# global: nodePortPrefix: 302 - +flavor: small ################################################################# # Application configuration defaults. @@ -71,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 10000Mi + requests: + cpu: 10m + memory: 8500Mi + large: + limits: + cpu: 400m + memory: 12000Mi + requests: + cpu: 40m + memory: 9000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-fs/values.yaml b/kubernetes/aaf/charts/aaf-fs/values.yaml index f484883f71..0e3a81a9c6 100644 --- a/kubernetes/aaf/charts/aaf-fs/values.yaml +++ b/kubernetes/aaf/charts/aaf-fs/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_fs:2.1.2-SNAPSHOT +image: onap/aaf/aaf_fs:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 10m + memory: 300Mi + large: + limits: + cpu: 500m + memory: 700Mi + requests: + cpu: 100m + memory: 400Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-gui/values.yaml b/kubernetes/aaf/charts/aaf-gui/values.yaml index 92faa6c564..5665d1df4f 100644 --- a/kubernetes/aaf/charts/aaf-gui/values.yaml +++ b/kubernetes/aaf/charts/aaf-gui/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_gui:2.1.2-SNAPSHOT +image: onap/aaf/aaf_gui:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -66,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 100m + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 200m + memory: 1Gi + requests: + cpu: 100m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-hello/values.yaml b/kubernetes/aaf/charts/aaf-hello/values.yaml index 27f59d1802..6fcf861420 100644 --- a/kubernetes/aaf/charts/aaf-hello/values.yaml +++ b/kubernetes/aaf/charts/aaf-hello/values.yaml @@ -25,7 +25,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_hello:2.1.2-SNAPSHOT +image: onap/aaf/aaf_hello:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 200Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 20m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-locate/values.yaml b/kubernetes/aaf/charts/aaf-locate/values.yaml index 86d67fc431..c9240025f1 100644 --- a/kubernetes/aaf/charts/aaf-locate/values.yaml +++ b/kubernetes/aaf/charts/aaf-locate/values.yaml @@ -23,13 +23,13 @@ global: # If mountPath is over NFS (e.g. /dockerdata-nfs is NFS mounted between the nodes), uncomment following lines. # persistence: # mountPath: /dockerdata - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_locate:2.1.2-SNAPSHOT +image: onap/aaf/aaf_locate:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -69,21 +69,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 20m + memory: 300Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-oauth/values.yaml b/kubernetes/aaf/charts/aaf-oauth/values.yaml index c349814f16..943ad16109 100644 --- a/kubernetes/aaf/charts/aaf-oauth/values.yaml +++ b/kubernetes/aaf/charts/aaf-oauth/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_oauth:2.1.2-SNAPSHOT +image: onap/aaf/aaf_oauth:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -65,21 +65,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 400Mi + requests: + cpu: 20m + memory: 200Mi + large: + limits: + cpu: 400m + memory: 600Mi + requests: + cpu: 40m + memory: 200Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-service/values.yaml b/kubernetes/aaf/charts/aaf-service/values.yaml index 3e0ed61711..5ad31ffdda 100644 --- a/kubernetes/aaf/charts/aaf-service/values.yaml +++ b/kubernetes/aaf/charts/aaf-service/values.yaml @@ -19,13 +19,13 @@ global: nodePortPrefix: 302 readinessRepository: oomk8s readinessImage: readiness-check:2.0.0 - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/aaf_service:2.1.2-SNAPSHOT +image: onap/aaf/aaf_service:2.1.1 pullPolicy: Always # flag to enable debugging - application support required @@ -66,21 +66,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 600Mi + requests: + cpu: 20m + memory: 300Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 40m + memory: 300Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml index 5eb7b330ba..0a83e85012 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/templates/statefulset.yaml @@ -47,7 +47,7 @@ spec: - mountPath: /quorumclient/auth name: {{ include "common.fullname" . }}-auth resources: -{{ include "common.resources" . | indent 12 }} +{{ include "common.resources" . | indent 10 }} {{- if .Values.nodeSelector }} nodeSelector: {{ toYaml .Values.nodeSelector | indent 10 }} diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml index c5fd489f31..d6ac1cb881 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-quorumclient/values.yaml @@ -28,7 +28,7 @@ global: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/smsquorumclient:2.0.0 +image: onap/aaf/smsquorumclient:latest pullPolicy: Always # flag to enable debugging - application support required @@ -54,21 +54,22 @@ persistence: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 700Mi + requests: + cpu: 10m + memory: 100Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml index ddfc7c61d0..ab0ad17b85 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/templates/statefulset.yaml @@ -45,7 +45,8 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true - + resources: +{{ include "common.resources" . | indent 10 }} - image: "{{ include "common.repository" . }}/{{ .Values.image.consul }}" name: {{ include "common.name" . }}-backend imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} @@ -62,6 +63,8 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true + resources: +{{ include "common.resources" . | indent 10 }} volumes: - name: {{ include "common.fullname" . }}-consuldata persistentVolumeClaim: diff --git a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml index 317abcda08..58017bdf40 100644 --- a/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/charts/aaf-sms-vault/values.yaml @@ -90,21 +90,22 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +flavor: small + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 700Mi + requests: + cpu: 10m + memory: 100Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml index 189cc0d57d..ed24f67d44 100644 --- a/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml +++ b/kubernetes/aaf/charts/aaf-sms/templates/deployment.yaml @@ -81,7 +81,7 @@ spec: - mountPath: /sms/auth name: {{ include "common.fullname" . }}-auth resources: -{{ include "common.resources" . | indent 12 }} +{{ include "common.resources" . | indent 10 }} {{- if .Values.nodeSelector }} nodeSelector: {{ toYaml .Values.nodeSelector | indent 10 }} diff --git a/kubernetes/aaf/charts/aaf-sms/values.yaml b/kubernetes/aaf/charts/aaf-sms/values.yaml index b75038c973..7a25581908 100644 --- a/kubernetes/aaf/charts/aaf-sms/values.yaml +++ b/kubernetes/aaf/charts/aaf-sms/values.yaml @@ -22,13 +22,13 @@ global: loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 persistence: {} - +flavor: small ################################################################# # Application configuration defaults. ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/aaf/sms:2.0.0 +image: onap/aaf/sms:latest pullPolicy: Always # flag to enable debugging - application support required @@ -84,21 +84,20 @@ persistence: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 10m + memory: 10Mi + large: + limits: + cpu: 400m + memory: 1Gi + requests: + cpu: 10m + memory: 100Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/aaf/values.yaml b/kubernetes/aaf/values.yaml index c8f048438b..931a31dc65 100644 --- a/kubernetes/aaf/values.yaml +++ b/kubernetes/aaf/values.yaml @@ -23,7 +23,6 @@ global: ubuntuInitImage: oomk8s/ubuntu-init:2.0.0 persistence: enabled: true - ################################################################# # Application configuration defaults. ################################################################# @@ -38,8 +37,9 @@ config: csServiceName: aaf-cass # gerrit branch where the latest aaf/auth/sample/public code exists gerritProject: http://gerrit.onap.org/r/aaf/authz.git - gerritBranch: master + gerritBranch: 2.0.0-ONAP +flavor: small # default number of instances replicaCount: 1 @@ -83,21 +83,20 @@ persistence: mountPath: /dockerdata-nfs mountSubPath: aaf/data -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 2 + memory: 3Gi + requests: + cpu: 2 + memory: 3Gi + large: + limits: + cpu: 4 + memory: 6Gi + requests: + cpu: 4 + memory: 6Gi + unlimited: {} -- cgit 1.2.3-korg