portal config seg

Issue-ID: OOM-557

Change-Id: I79f73ce84102caae5fdd4570cf1acb26cb3eeb4c
Signed-off-by: mayank <mayank.gupta@amdocs.com>

12 files changed, 1075 insertions, 0 deletions

diff --git a/kubernetes/portal/resources/config/log/filebeat/filebeat.yml b/kubernetes/portal/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..f316b866af
--- /dev/null
+++ b/kubernetes/portal/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,41 @@
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["logstash.onap-log:5044"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml b/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml
new file mode 100644
index 0000000000..be55dc9cff
--- /dev/null
+++ b/kubernetes/portal/resources/config/log/portal/onapportal/logback.xml
@@ -0,0 +1,303 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  ============LICENSE_START==========================================
+  ONAP Portal
+  ===================================================================
+  Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+  ===================================================================
+
+  Unless otherwise specified, all software contained herein is licensed
+  under the Apache License, Version 2.0 (the “License”);
+  you may not use this software except in compliance with the License.
+  You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+  Unless otherwise specified, all documentation contained herein is licensed
+  under the Creative Commons License, Attribution 4.0 Intl. (the “License”);
+  you may not use this documentation except in compliance with the License.
+  You may obtain a copy of the License at
+
+              https://creativecommons.org/licenses/by/4.0/
+
+  Unless required by applicable law or agreed to in writing, documentation
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+  ============LICENSE_END============================================
+
+  ECOMP is a trademark and service mark of AT&T Intellectual Property.
+  -->
+
+<!DOCTYPE xml>
+<configuration scan="true" scanPeriod="3 seconds" debug="true">
+	<!-- Log-back files for the ECOMP Portal are created in directory 
+		${catalina.base}/logs/${componentName}; e.g., apache-tomcat-8.0.35/logs/onapportal/application.log -->
+	<!--<jmxConfigurator /> -->
+
+	<!-- specify the component name -->
+	<property name="componentName" value="onapportal"></property>
+
+	<!-- specify the base path of the log directory -->
+	<property name="logDirPrefix" value="${catalina.base}/logs"></property>
+
+	<!-- The directories where logs are written -->
+	<property name="logDirectory" value="${logDirPrefix}/${componentName}" />
+	<!-- Can easily relocate debug logs by modifying this path. -->
+	<property name="debugLogDirectory" value="${logDirPrefix}/${componentName}" />
+
+	<!-- log file names -->
+	<property name="generalLogName" value="application" />
+	<property name="errorLogName" value="error" />
+	<property name="metricsLogName" value="metrics" />
+	<property name="auditLogName" value="audit" />
+	<property name="debugLogName" value="debug" />
+	<!-- These loggers are not used in code (yet). <property name="securityLogName"
+		value="security" /> <property name="policyLogName" value="policy" /> <property
+		name="performanceLogName" value="performance" /> <property name="serverLogName"
+		value="server" /> -->
+
+	<!-- ServerFQDN=Server,  -->
+	<property name="auditLoggerPattern"
+		value="%X{AuditLogBeginTimestamp}|%X{AuditLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" />
+
+	<property name="metricsLoggerPattern"
+		value="%X{MetricsLogBeginTimestamp}|%X{MetricsLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" />
+
+	<property name="errorLoggerPattern"
+		value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{ClassName}|%X{AlertSeverity}|%X{ErrorCode}|%X{ErrorDescription}| %msg%n" />
+
+	<property name="defaultLoggerPattern"
+		value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ClassName}| %msg%n" />
+
+	<!-- use %class so library logging calls yield their class name -->
+  	<property name="applicationLoggerPattern"
+		value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%class{36}| %msg%n" />
+
+	<!--
+	<property name="defaultPattern"
+		value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" />
+	<property name="debugLoggerPattern"
+		value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}| %msg%n" />
+	 -->
+	<!-- <property name="debugLoggerPattern" value="%date{ISO8601}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|[%caller{3}]|%msg%n"
+		/> -->
+	<!-- Example evaluator filter applied against console appender -->
+	<appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+		<encoder>
+			<pattern>${applicationLoggerPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<!-- ============================================================================ -->
+	<!-- EELF Appenders -->
+	<!-- ============================================================================ -->
+
+	<!-- The EELFAppender is used to record events to the general application
+		log -->
+
+
+	<appender name="EELF"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${generalLogName}.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<!-- daily rollover -->
+			<fileNamePattern>${logDirectory}/${generalLogName}.log.%d{yyyy-MM-dd}.zip
+			</fileNamePattern>
+			<maxHistory>30</maxHistory>
+		</rollingPolicy>
+		<encoder>
+			<pattern>${applicationLoggerPattern}</pattern>
+		</encoder>
+		<filter class="org.openecomp.portalapp.portal.utils.CustomLoggingFilter" />
+	</appender>
+
+	<appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<!-- Class name is part of caller data -->
+    	<includeCallerData>true</includeCallerData>
+		<appender-ref ref="EELF" />
+	</appender>
+
+	<!-- EELF Security Appender. This appender is used to record security events
+		to the security log file. Security events are separate from other loggers
+		in EELF so that security log records can be captured and managed in a secure
+		way separate from the other logs. This appender is set to never discard any
+		events. -->
+	<!-- <appender name="EELFSecurity" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${securityLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+		<fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip </fileNamePattern>
+		<minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy
+		class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder>
+		</appender> <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize> <discardingThreshold>0</discardingThreshold> <appender-ref
+		ref="EELFSecurity" /> </appender> -->
+
+	<!-- EELF Performance Appender. This appender is used to record performance
+		records. -->
+	<!-- <appender name="EELFPerformance" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${performanceLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+		<fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip </fileNamePattern>
+		<minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy
+		class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy> <encoder> <outputPatternAsHeader>true</outputPatternAsHeader>
+		<pattern>${defaultPattern}</pattern> </encoder> </appender> <appender name="asyncEELFPerformance"
+		class="ch.qos.logback.classic.AsyncAppender"> <queueSize>256</queueSize>
+		<appender-ref ref="EELFPerformance" /> </appender> -->
+
+	<!-- EELF Server Appender. This appender is used to record Server related
+		logging events. The Server logger and appender are specializations of the
+		EELF application root logger and appender. This can be used to segregate
+		Server events from other components, or it can be eliminated to record these
+		events as part of the application root log. -->
+	<!-- <appender name="EELFServer" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${serverLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+		<fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip </fileNamePattern>
+		<minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy
+		class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder>
+		</appender> <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize> <appender-ref ref="EELFServer" /> </appender> -->
+
+	<!-- EELF Policy Appender. This appender is used to record Policy engine
+		related logging events. The Policy logger and appender are specializations
+		of the EELF application root logger and appender. This can be used to segregate
+		Policy engine events from other components, or it can be eliminated to record
+		these events as part of the application root log. -->
+	<!-- <appender name="EELFPolicy" class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${policyLogName}.log</file> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+		<fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip </fileNamePattern>
+		<minIndex>1</minIndex> <maxIndex>9</maxIndex> </rollingPolicy> <triggeringPolicy
+		class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy> <encoder> <pattern>${defaultPattern}</pattern> </encoder>
+		</appender> <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize> <appender-ref ref="EELFPolicy" /> </appender> -->
+
+	<!-- EELF Audit Appender. This appender is used to record audit engine related
+		logging events. The audit logger and appender are specializations of the
+		EELF application root logger and appender. This can be used to segregate
+		Policy engine events from other components, or it can be eliminated to record
+		these events as part of the application root log. -->
+
+	<appender name="EELFAudit"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${auditLogName}.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<!-- daily roll over -->
+			<fileNamePattern>${logDirectory}/${auditLogName}.log.%d{yyyy-MM-dd}.zip
+			</fileNamePattern>
+			<maxHistory>30</maxHistory>
+		</rollingPolicy>
+		<encoder>
+			<pattern>${auditLoggerPattern}</pattern>
+		</encoder>
+	</appender>
+	<appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="EELFAudit" />
+	</appender>
+
+	<appender name="EELFMetrics"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${metricsLogName}.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<!-- daily roll over -->
+			<fileNamePattern>${logDirectory}/${metricsLogName}.log.%d{yyyy-MM-dd}.zip
+			</fileNamePattern>
+			<maxHistory>30</maxHistory>
+		</rollingPolicy>
+		<encoder>
+			<pattern>${metricsLoggerPattern}</pattern>
+		</encoder>
+	</appender>
+
+
+	<appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="EELFMetrics" />
+	</appender>
+
+	<appender name="EELFError"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/${errorLogName}.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<!-- daily roll over -->
+			<fileNamePattern>${logDirectory}/${errorLogName}.log.%d{yyyy-MM-dd}.zip
+			</fileNamePattern>
+			<maxHistory>30</maxHistory>
+		</rollingPolicy>
+		<encoder>
+			<pattern>${errorLoggerPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="EELFError" />
+	</appender>
+
+	<appender name="EELFDebug"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${debugLogDirectory}/${debugLogName}.log</file>
+		<rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy">
+			<!-- daily roll over -->
+			<fileNamePattern>${logDirectory}/${debugLogName}.log.%d{yyyy-MM-dd}.zip
+			</fileNamePattern>
+			<maxHistory>30</maxHistory>
+		</rollingPolicy>
+		<encoder>
+			<pattern>${defaultLoggerPattern}</pattern>
+		</encoder>
+	</appender>
+
+	<appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="EELFDebug" />
+		<includeCallerData>true</includeCallerData>
+	</appender>
+
+
+	<!-- ============================================================================ -->
+	<!-- EELF loggers -->
+	<!-- ============================================================================ -->
+	<logger name="com.att.eelf" level="info" additivity="false">
+		<appender-ref ref="asyncEELF" />
+	</logger>
+
+	<!-- <logger name="com.att.eelf.security" level="info" additivity="false">
+		<appender-ref ref="asyncEELFSecurity" /> </logger> <logger name="com.att.eelf.perf"
+		level="info" additivity="false"> <appender-ref ref="asyncEELFPerformance"
+		/> </logger> <logger name="com.att.eelf.server" level="info" additivity="false">
+		<appender-ref ref="asyncEELFServer" /> </logger> <logger name="com.att.eelf.policy"
+		level="info" additivity="false"> <appender-ref ref="asyncEELFPolicy" /> </logger> -->
+
+	<logger name="com.att.eelf.audit" level="info" additivity="false">
+		<appender-ref ref="asyncEELFAudit" />
+	</logger>
+
+	<logger name="com.att.eelf.metrics" level="info" additivity="false">
+		<appender-ref ref="asyncEELFMetrics" />
+	</logger>
+
+	<logger name="com.att.eelf.error" level="info" additivity="false">
+		<appender-ref ref="asyncEELFError" />
+	</logger>
+
+	<logger name="com.att.eelf.debug" level="debug" additivity="false">
+		<appender-ref ref="asyncEELFDebug" />
+	</logger>
+
+	<root level="INFO">
+		<appender-ref ref="asyncEELF" />
+	</root>
+
+</configuration>
diff --git a/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml b/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml
new file mode 100644
index 0000000000..32a790c6a3
--- /dev/null
+++ b/kubernetes/portal/resources/config/log/portal/onapportalsdk/logback.xml
@@ -0,0 +1,371 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  ============LICENSE_START==========================================
+  ONAP Portal SDK
+  ===================================================================
+  Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+  ===================================================================
+ 
+  Unless otherwise specified, all software contained herein is licensed
+  under the Apache License, Version 2.0 (the “License”);
+  you may not use this software except in compliance with the License.
+  You may obtain a copy of the License at
+ 
+              http://www.apache.org/licenses/LICENSE-2.0
+ 
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+ 
+  Unless otherwise specified, all documentation contained herein is licensed
+  under the Creative Commons License, Attribution 4.0 Intl. (the “License”);
+  you may not use this documentation except in compliance with the License.
+  You may obtain a copy of the License at
+ 
+              https://creativecommons.org/licenses/by/4.0/
+ 
+  Unless required by applicable law or agreed to in writing, documentation
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+ 
+  ============LICENSE_END============================================
+ 
+  ECOMP is a trademark and service mark of AT&T Intellectual Property.
+  -->
+
+<configuration scan="true" scanPeriod="3 seconds" debug="true">
+  <!-- 
+  Logback files for the ONAP Portal SDK Application 
+  are created in directory ${catalina.base}/logs/${componentName}
+  e.g., apache-tomcat-8.0.35/logs/epsdk_app/application.log  
+  -->
+  <!--<jmxConfigurator /> -->
+
+  <!--  specify the component name -->
+  <property name="componentName" value="epsdk_app"></property>
+  
+  <!--  specify the base path of the log directory -->
+  <property name="logDirPrefix" value="${catalina.base}/logs"></property>
+  
+  <!-- The directories where logs are written -->
+  <property name="logDirectory" value="${logDirPrefix}/${componentName}" />
+  <!-- Can easily relocate debug logs by modifying this path. -->
+  <property name="debugLogDirectory" value="${logDirPrefix}/${componentName}" />
+  
+  <!--  log file names -->
+  <property name="generalLogName" value="application" />
+  <property name="errorLogName" value="error" />
+  <property name="metricsLogName" value="metrics" />
+  <property name="auditLogName" value="audit" />
+  <property name="debugLogName" value="debug" />
+  <!--
+  These loggers are not used in code (yet). 
+  <property name="securityLogName" value="security" />
+  <property name="policyLogName" value="policy" />
+  <property name="performanceLogName" value="performance" />
+  <property name="serverLogName" value="server" />
+   -->
+  
+  <!-- 1610 Logging Fields Format Revisions --> 
+  <property name="auditLoggerPattern"
+	value="%X{AuditLogBeginTimestamp}|%X{AuditLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" />
+
+  <property name="metricsLoggerPattern"
+	value="%X{MetricsLogBeginTimestamp}|%X{MetricsLogEndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{Timer}|%X{ServerFQDN}|%X{ClientIPAddress}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVisualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}| %msg%n" />
+
+  <property name="errorLoggerPattern"
+	value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{ClassName}|%X{AlertSeverity}|%X{ErrorCode}|%X{ErrorDescription}| %msg%n" />
+
+  <property name="defaultLoggerPattern"
+	value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%X{ClassName}| %msg%n" />
+
+  <!-- use %class so library logging calls yield their class name -->
+  <property name="applicationLoggerPattern"
+	value="%date{yyyy-MM-dd'T'HH:mm:ss.SSSXXX}|%X{RequestId}|%thread|%class{36}| %msg%n" />
+
+  <!-- Example evaluator filter applied against console appender -->
+  <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+    <encoder>
+      <pattern>${defaultLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <!-- ============================================================================ -->
+  <!-- EELF Appenders -->
+  <!-- ============================================================================ -->
+
+  <!-- The EELFAppender is used to record events to the general application 
+    log -->
+    
+    
+  <appender name="EELF"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${generalLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> 
+      <!-- daily rollover --> 
+      <fileNamePattern>${logDirectory}/${generalLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> 
+ 
+      <!-- keep 30 days' worth of history capped at 3GB total size --> 
+      <maxHistory>30</maxHistory> 
+      <totalSizeCap>3GB</totalSizeCap> 
+ 
+    </rollingPolicy>
+    <encoder>
+      <pattern>${applicationLoggerPattern}</pattern>
+    </encoder>
+    <filter class="org.onap.portalapp.util.CustomLoggingFilter" />
+  </appender>
+  
+  <appender name="asyncEELF" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <!-- Class name is part of caller data -->
+    <includeCallerData>true</includeCallerData>
+    <appender-ref ref="EELF" />
+  </appender>
+
+  <!-- EELF Security Appender. This appender is used to record security events 
+    to the security log file. Security events are separate from other loggers 
+    in EELF so that security log records can be captured and managed in a secure 
+    way separate from the other logs. This appender is set to never discard any 
+    events. -->
+  <!--     
+  <appender name="EELFSecurity"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${securityLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${securityLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFSecurity" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <discardingThreshold>0</discardingThreshold>
+    <appender-ref ref="EELFSecurity" />
+  </appender>
+   -->
+   
+  <!-- EELF Performance Appender. This appender is used to record performance 
+    records. -->
+  <!--
+  <appender name="EELFPerformance"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${performanceLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${performanceLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <outputPatternAsHeader>true</outputPatternAsHeader>
+      <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFPerformance" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFPerformance" />
+  </appender>
+  -->
+
+  <!-- EELF Server Appender. This appender is used to record Server related 
+    logging events. The Server logger and appender are specializations of the 
+    EELF application root logger and appender. This can be used to segregate Server 
+    events from other components, or it can be eliminated to record these events 
+    as part of the application root log. -->
+  <!--
+  <appender name="EELFServer"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${serverLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${serverLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+        <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFServer" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFServer" />
+  </appender>
+   -->
+  
+  <!-- EELF Policy Appender. This appender is used to record Policy engine 
+    related logging events. The Policy logger and appender are specializations 
+    of the EELF application root logger and appender. This can be used to segregate 
+    Policy engine events from other components, or it can be eliminated to record 
+    these events as part of the application root log. -->
+  <!--
+  <appender name="EELFPolicy"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${policyLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${policyLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+        <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFPolicy" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFPolicy" />
+  </appender>
+  -->
+  
+  <!-- EELF Audit Appender. This appender is used to record audit engine 
+    related logging events. The audit logger and appender are specializations 
+    of the EELF application root logger and appender. This can be used to segregate 
+    Policy engine events from other components, or it can be eliminated to record 
+    these events as part of the application root log. -->
+    
+  <appender name="EELFAudit"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${auditLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> 
+      <!-- daily rollover --> 
+      <fileNamePattern>${logDirectory}/${auditLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> 
+ 
+      <!-- keep 30 days' worth of history capped at 3GB total size --> 
+      <maxHistory>30</maxHistory> 
+      <totalSizeCap>3GB</totalSizeCap> 
+ 
+    </rollingPolicy>
+    <encoder>
+         <pattern>${auditLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFAudit" />
+  </appender>
+
+  <appender name="EELFMetrics"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${metricsLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> 
+      <!-- daily rollover --> 
+      <fileNamePattern>${logDirectory}/${metricsLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> 
+ 
+      <!-- keep 30 days' worth of history capped at 3GB total size --> 
+      <maxHistory>30</maxHistory> 
+      <totalSizeCap>3GB</totalSizeCap> 
+ 
+    </rollingPolicy>
+    <encoder>
+      <pattern>${metricsLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  
+  <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFMetrics"/>
+  </appender>
+   
+  <appender name="EELFError"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${errorLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> 
+      <!-- daily rollover --> 
+      <fileNamePattern>${logDirectory}/${errorLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> 
+ 
+      <!-- keep 30 days' worth of history capped at 3GB total size --> 
+      <maxHistory>30</maxHistory> 
+      <totalSizeCap>3GB</totalSizeCap> 
+ 
+    </rollingPolicy>
+    <encoder>
+      <pattern>${errorLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFError"/>
+  </appender>
+  
+   <appender name="EELFDebug"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${debugLogDirectory}/${debugLogName}.log</file>
+    <rollingPolicy class="ch.qos.logback.core.rolling.TimeBasedRollingPolicy"> 
+      <!-- daily rollover --> 
+      <fileNamePattern>${logDirectory}/${debugLogName}.%d{yyyy-MM-dd}.log.zip</fileNamePattern> 
+ 
+      <!-- keep 30 days' worth of history capped at 3GB total size --> 
+      <maxHistory>30</maxHistory> 
+      <totalSizeCap>3GB</totalSizeCap> 
+ 
+    </rollingPolicy>
+    <encoder>
+      <pattern>${defaultLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFDebug" />
+  </appender>
+ 
+  
+ 
+
+  <logger name="org.onap.eelf" level="info" additivity="false">
+    <appender-ref ref="asyncEELF" />
+  </logger>
+
+  <logger name="org.onap.eelf.audit" level="info" additivity="false">
+    <appender-ref ref="asyncEELFAudit" />
+  </logger>
+  
+  <logger name="org.onap.eelf.debug" level="debug" additivity="false">
+    <appender-ref ref="asyncEELFDebug" />
+  </logger>
+	
+  <logger name="org.onap.eelf.error" level="info" additivity="false">
+    <appender-ref ref="asyncEELFError" />
+  </logger>
+
+  <logger name="org.onap.eelf.metrics" level="info" additivity="false">
+    <appender-ref ref="asyncEELFMetrics" />
+  </logger>      
+    
+  <root level="DEBUG">
+    <appender-ref ref="asyncEELF" />
+  </root>
+
+</configuration>
diff --git a/kubernetes/portal/resources/config/mariadb/oom_updates.sql b/kubernetes/portal/resources/config/mariadb/oom_updates.sql
new file mode 100644
index 0000000000..781b04626c
--- /dev/null
+++ b/kubernetes/portal/resources/config/mariadb/oom_updates.sql
@@ -0,0 +1,8 @@
+USE portal;
+/*
+Any updates required by OOM to the portaldb are made here.
+1. split up SDC-FE and SDC-BE.  Originally both FE and BE point to the same IP
+while the OOM K8s version has these service split up.
+*/
+UPDATE fn_app SET app_rest_endpoint = 'http://sdc.api.be.simpledemo.onap.org:8080/api/v2' where app_name = 'SDC';
+UPDATE fn_app SET app_url = 'http://cli.api.simpledemo.onap.org:8080', app_type = 1 where app_name='CLI';
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties
new file mode 100755
index 0000000000..876c5c7b9a
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/fusion.properties
@@ -0,0 +1,46 @@
+# domain settings
+#domain_class_location =
+
+# validator settings
+#default_error_message = Default error message
+
+login_url_no_ret_val = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+
+user_attribute_name      = user
+
+# User Session settings
+roles_attribute_name          = roles
+role_functions_attribute_name = role_functions
+
+# menu settings
+menu_query_name                      = menuData
+application_menu_set_name            = APP
+application_menu_attribute_name      = applicationMenuData
+business_direct_menu_set_name        = BD
+business_direct_menu_attribute_name  = businessDirectMenuData
+
+# ECOMP settings
+ecomp_app_id = 1
+# Role settings
+sys_admin_role_id = 1
+account_admin_role_id = 999
+restricted_app_role_id = 900
+
+# Home Page index html
+home_page          					= /index.html
+
+authentication_mechanism =DBAUTH
+
+login.error.hrid.empty = Login failed, please contact system administrator.
+login.error.hrid.not-found = User not found, please contact system administrator.
+login.error.user.inactive = Account is disabled, please contact system administrator.
+
+#
+# Number of seconds to poll health (database operational, etc.)
+#
+health_poll_interval_seconds = 5
+#
+# If a component is down a log entry will be written that triggers an alert.  This parameter specifies how often this alert should be triggered
+# if the component remains down.   For example a value of 30, would translate to 30 * 60 seconds = 1800 seconds, or every 30 minutes
+#
+health_fail_alert_every_x_intervals =  30
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties
new file mode 100755
index 0000000000..2a33551933
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/openid-connect.properties
@@ -0,0 +1,3 @@
+authentication_server_url = http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/
+ecomp_openid_connect_client = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/openid_connect_login
+ecomp_redirect_uri = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/welcome.htm
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties
new file mode 100755
index 0000000000..4871b42288
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/portal.properties
@@ -0,0 +1,24 @@
+# Not used by portal
+portal.api.impl.class = org.onap.portalsdk.core.onboarding.client.OnBoardingApiServiceImpl.not.used.by.portal
+portal.api.prefix = /api
+max.idle.time = 5
+user.attribute.name = user_attribute
+
+# for single sign on
+ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+
+# URL of the ECOMP Portal REST API
+ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi
+
+ueb_listeners_enable = true
+
+ueb_app_key = 7GkVcrO6sIDb3ngW
+ueb_app_secret = uCYgKjWKK5IxPGNNZzYSSWo9
+ueb_app_mailbox_name = ECOMP-PORTAL-INBOX
+
+ueb_url_list = dmaap.onap-message-router
+ecomp_portal_inbox_name = ECOMP-PORTAL-INBOX
+
+# Consumer group name for UEB topic.
+# Use the special tag to generate a unique one for each sdk-app server.
+ueb_app_consumer_group_name = {UUID}
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties
new file mode 100755
index 0000000000..9085cee47f
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTAL/system.properties
@@ -0,0 +1,100 @@
+#mysql
+db.driver = org.mariadb.jdbc.Driver
+db.connectionURL = jdbc:mariadb:failover://portaldb.onap-portal:3306/portal
+db.userName =root
+db.password =Aa123456
+db.hib.dialect = org.hibernate.dialect.MySQLDialect
+db.min_pool_size = 5
+db.max_pool_size = 10
+hb.dialect = org.hibernate.dialect.MySQLDialect
+hb.show_sql = false
+hb.db_reconnect = true
+hb.idle_connection_test_period = 3600
+
+app_display_name = Portal
+files_path = /tmp
+context_root = ECOMPPORTAL
+# menu settings
+menu_query_name                      = menuData
+menu_properties_file_location        = /WEB-INF/fusion/menu/
+application_menu_set_name            = APP
+application_menu_attribute_name      = applicationMenuData
+application_menu_properties_name     = menu.properties
+business_direct_menu_set_name        = BD
+business_direct_menu_properties_name = bd.menu.properties
+business_direct_menu_attribute_name  = businessDirectMenuData
+
+application_user_id           = 30000
+post_default_role_id          = 1
+
+#Enable Fusion Mobile capabilities for the application
+mobile_enable			  	  = false
+
+cache_config_file_path        = /WEB-INF/conf/cache.ccf
+cache_switch                  = 1
+cache_load_on_startup         = false
+
+user_name					  = fullName
+decryption_key				  = AGLDdG4D04BKm2IxIWEr8o==
+
+
+#Cron Schedules
+cron_site_name                = one
+log_cron                      = 0 * * * * ? *
+sessiontimeout_feed_cron	  = 0 0/5 * * * ? *
+
+#Front end URL
+frontend_url                  = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/applicationsHome 
+
+#cookie domain
+cookie_domain = onap.org
+
+# An Unqiue 128-bit value defined to indentify a specific version of
+# ECOMP Portal deployed on a specific virtual machine.
+# This value must be generated and updated at the time of
+# the deployment.
+# Online Unique UUID generator - https://www.uuidgenerator.net/
+instance_uuid 				= 90bc9497-10e6-49fe-916b-dcdfaa972383
+
+elastic_search_url 			= http://
+contact_us_link				= http://
+user_guide_link             = http://
+
+# Contact Us page properties
+ush_ticket_url				= http://
+feedback_email_address		= portal@lists.onap.org
+portal_info_url				= https://
+
+#Online user bar refresh interval, in seconds
+online_user_update_rate                  = 30
+
+#Online user bar refresh total duration, in seconds
+online_user_update_duration       = 300
+
+#authenticate user server
+authenticate_user_server=http://portal.api.simpledemo.onap.org:8383/openid-connect-server-webapp/allUsers
+
+#window width threshold to collapse left/right menu when page onload
+window_width_threshold_left_menu = 1400
+window_width_threshold_right_menu = 1350
+
+# User notification refresh interval and duration, in seconds
+notification_update_rate = 90
+notification_update_duration = 900
+
+#Microservices Related Properties for Portal
+microservices.widget.protocol = http
+microservices.widget.hostname = portalwidgets.onap-portal
+microservices.widget.username = widget_user
+microservices.widget.password = KpuqIB08YHg+btG+pjX+sA==
+#This property won't be needed after consul is functional on VMs -
+microservices.widget.local.port = 8082
+microservices.m-learn.local.port = 8083
+#HALO API enable flag
+external_access_enable = false
+
+#delete auditlog from number of days ago
+auditlog_del_day_from = 365
+
+#External system notification URL
+external_system_notification_url= https://jira.onap.org/browse/
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties
new file mode 100644
index 0000000000..8ee0a95f74
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/fusion.properties
@@ -0,0 +1,35 @@
+# login settings
+login_method_backdoor       = backdoor
+login_method_attribute_name = login_method
+
+# These properties will be removed after SingleSignOnController is cleaned
+authentication_mechanism = BOTH
+login_method_csp            = csp
+login_method_web_junction   = web_junction
+
+#login message
+login.error.hrid.empty = Login failed, please contact system administrator.
+login.error.hrid.not-found = User not found, please contact system administrator.
+login.error.user.inactive = Account is disabled, please contact system administrator.
+
+# User Session settings
+user_attribute_name           = user
+roles_attribute_name          = roles
+role_function_list = role_function_list
+role_functions_attribute_name = role_functions
+
+# Import-user LDAP settings
+post_initial_context_factory = com.sun.jndi.ldap.LdapCtxFactory
+post_provider_url            = ldap://ldap.mycompany.com:389
+post_security_principal      = ou=people,o=mycompany,c=us
+post_max_result_size         = 499
+
+# menu settings
+menu_query_name                      = menuData
+application_menu_set_name            = APP
+application_menu_attribute_name      = applicationMenuData
+business_direct_menu_set_name        = BD
+business_direct_menu_attribute_name  = businessDirectMenuData
+
+# Role settings
+sys_admin_role_id = 1
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties
new file mode 100755
index 0000000000..e77a701798
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/portal.properties
@@ -0,0 +1,45 @@
+# Properties read by ECOMP Framework library, ecompFW.jar
+
+##########################################################################
+# The following properties should NOT be changed by partner applications.
+##########################################################################
+
+portal.api.prefix = /api
+max.idle.time = 5
+user.attribute.name = user_attribute
+
+#Use REST API instead of UEB to fetch the functional menu data
+use_rest_for_functional_menu=true
+
+##########################################################################
+# The following properties MUST be changed by partner applications.
+##########################################################################
+
+# Name of java class that implements the OnBoardingApiService interface.
+# epsdk 1.3 uses org.onap prefix
+portal.api.impl.class = org.onap.portalapp.service.OnBoardingApiServiceImpl
+
+# CSP Global Log On for single sign on
+ecomp_redirect_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm
+
+# URL of the ECOMP Portal REST API
+
+ecomp_rest_url = http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/auxapi
+
+# Applications do not need to run a UEB listener in 1610.
+ueb_listeners_enable = false
+
+# UEB Configuration
+ueb_url_list = dmaap.onap-message-router
+# ECOMP Portal listens on this UEB topic
+ecomp_portal_inbox_name = ECOMP-PORTAL-INBOX
+# Replace these 3 default values with the ones for your specific App,
+# as shown on the on-boarding page on the ECOMP Portal web application.
+ueb_app_key = jQd4a9zVNi4ePyBp
+ueb_app_secret = P0HpqEBhKJvxjRYdw2sCTUll
+ueb_app_mailbox_name = ECOMP-PORTAL-OUTBOX-APP1
+# Consumer group name for UEB topic.
+# Use the special tag '{UUID}' to generate a unique one for each sdk-app server.
+ueb_app_consumer_group_name = {UUID}
+
+decryption_key				  = AGLDdG4D04BKm2IxIWEr8o==
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties
new file mode 100755
index 0000000000..d638abcca3
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPPORTALSDK/system.properties
@@ -0,0 +1,64 @@
+# Properties read by ECOMP Core library, ecompSDK-core.jar
+
+##########################################################################
+# The following properties should NOT be changed by partner applications.
+##########################################################################
+
+application_user_id           = 30000
+post_default_role_id          = 16
+clustered                     = true
+
+#Enable Fusion Mobile capabilities for the application
+mobile_enable			  	  = false
+
+# Cache config file is needed on the classpath
+cache_config_file_path        = /WEB-INF/classes/cache.ccf
+cache_switch                  = 199
+cache_load_on_startup         = false
+
+user_name					  = fullName
+decryption_key				  = AGLDdG4D04BKm2IxIWEr8o==
+
+##########################################################################
+# The following properties MAY require changes by partner applications.
+##########################################################################
+
+db.driver = org.mariadb.jdbc.Driver
+db.connectionURL = jdbc:mariadb://portaldb.onap-portal:3306/ecomp_sdk
+db.userName = root
+db.password = Aa123456
+db.min_pool_size = 5
+db.max_pool_size = 10
+hb.dialect = org.hibernate.dialect.MySQLDialect
+# SQL statements are logged to stdout
+hb.show_sql = true
+hb.idle_connection_test_period = 3600
+
+app_display_name = Demo App
+files_path = /tmp
+
+#element map files
+element_map_file_path = /tmp
+element_map_icon_path = app/fusionapp/icons/
+
+#Cron Schedules
+log_cron                      = 0 0/1 * * * ?;
+mylogins_feed_cron            = 0 0/60 * * * ?;
+#sessiontimeout_feed_cron	  = 0 * * * * ? *
+my_login_feed_output_dir      = /tmp/MyLogins
+
+# Link shown in Help menu
+contact_us_link = https://todo_contact_us_link.com
+
+# An Unique 128-bit value defined to identify a specific version
+# of an application deployed on a specific virtual machine.
+# This value must be generated and updated by the application
+# which is using the ECOMP SDK at the time of its deployment.
+# Online Unique UUID generator - https://www.uuidgenerator.net/
+instance_uuid=8da691c9-987d-43ed-a358-00ac2f35685d
+
+# R Cloud feature - configure this property to enable notebook feature - for more details on RCloud please visit https://rcloud.social/index.html
+guard_notebook_url=
+
+#authenticate user server
+authenticate_user_server=http://portalapps.onap-portal:8383/openid-connect-server-webapp/allUsers
diff --git a/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties
new file mode 100644
index 0000000000..a5e55dc6d8
--- /dev/null
+++ b/kubernetes/portal/resources/config/portal-fe/webapps/etc/ONAPWIDGETMS/application.properties
@@ -0,0 +1,35 @@
+## General App Properties
+server.contextPath=/widget
+server.port=8082
+spring.http.multipart.max-file-size=128MB
+spring.http.multipart.max-request-size=128MB
+microservice.widget.location=/tmp
+
+## App DB Properties
+spring.datasource.url=jdbc:mysql://portaldb.onap-portal:3306/portal
+spring.datasource.username=root
+spring.datasource.password=Aa123456
+spring.jpa.properties.hibernate.dialect=org.hibernate.dialect.MySQLDialect
+spring.database.driver.classname=org.mariadb.jdbc.Driver
+spring.jpa.show-sql=false
+spring.jpa.properties.hibernate.format_sql=false
+
+## Basic Authentication Properties
+security.user.name=widget_user
+security.user.password=ENC(IjywcRnI9+nuVEh9+OFFiRWAjBT1n718)
+
+initialization.default.widgets=true
+initialization.widgetData.url=http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/commonWidgets
+
+## Account Basic Authentication Properties
+account.user.name=portal
+account.user.password=6APqvG4AU2rfLgCvMdySwQ==
+
+## Certificate Properties
+#server.ssl.key-store=classpath:widget-keystore.p12
+#server.ssl.key-store-password=ENC(DiIYnAMab4u7rEW2yKhF9zBL00uU55q8)
+#server.ssl.keyStoreType=PKCS12
+#server.ssl.keyAlias=widget-microservice
+
+## Jasypt Properties
+jasypt.encryptor.password=EncryptionKey