diff options
Diffstat (limited to 'test/mocks/datafilecollector-testharness/http-https-server/apache2/conf/httpd.conf')
| -rw-r--r-- | test/mocks/datafilecollector-testharness/http-https-server/apache2/conf/httpd.conf | 586 |
1 files changed, 0 insertions, 586 deletions
diff --git a/test/mocks/datafilecollector-testharness/http-https-server/apache2/conf/httpd.conf b/test/mocks/datafilecollector-testharness/http-https-server/apache2/conf/httpd.conf deleted file mode 100644 index 58892c461..000000000 --- a/test/mocks/datafilecollector-testharness/http-https-server/apache2/conf/httpd.conf +++ /dev/null @@ -1,586 +0,0 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. -# In particular, see -# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/access_log" -# with ServerRoot set to "/usr/local/apache2" will be interpreted by the -# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" -# will be interpreted as '/logs/access_log'. - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# -ServerRoot "/usr/local/apache2" - -# -# Mutex: Allows you to set the mutex mechanism and mutex file directory -# for individual mutexes, or change the global defaults -# -# Uncomment and change the directory if mutexes are file-based and the default -# mutex file directory is not on a local disk or is not appropriate for some -# other reason. -# -# Mutex default:logs - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the <VirtualHost> -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 80 -Listen 32000 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -LoadModule auth_jwt_module modules/mod_authnz_jwt.so -LoadModule mpm_event_module modules/mod_mpm_event.so -#LoadModule mpm_prefork_module modules/mod_mpm_prefork.so -#LoadModule mpm_worker_module modules/mod_mpm_worker.so -LoadModule authn_file_module modules/mod_authn_file.so -#LoadModule authn_dbm_module modules/mod_authn_dbm.so -#LoadModule authn_anon_module modules/mod_authn_anon.so -#LoadModule authn_dbd_module modules/mod_authn_dbd.so -#LoadModule authn_socache_module modules/mod_authn_socache.so -LoadModule authn_core_module modules/mod_authn_core.so -LoadModule authz_host_module modules/mod_authz_host.so -LoadModule authz_groupfile_module modules/mod_authz_groupfile.so -LoadModule authz_user_module modules/mod_authz_user.so -#LoadModule authz_dbm_module modules/mod_authz_dbm.so -#LoadModule authz_owner_module modules/mod_authz_owner.so -#LoadModule authz_dbd_module modules/mod_authz_dbd.so -LoadModule authz_core_module modules/mod_authz_core.so -#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so -#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so -LoadModule access_compat_module modules/mod_access_compat.so -LoadModule auth_basic_module modules/mod_auth_basic.so -#LoadModule auth_form_module modules/mod_auth_form.so -#LoadModule auth_digest_module modules/mod_auth_digest.so -#LoadModule allowmethods_module modules/mod_allowmethods.so -#LoadModule isapi_module modules/mod_isapi.so -#LoadModule file_cache_module modules/mod_file_cache.so -#LoadModule cache_module modules/mod_cache.so -#LoadModule cache_disk_module modules/mod_cache_disk.so -#LoadModule cache_socache_module modules/mod_cache_socache.so -LoadModule socache_shmcb_module modules/mod_socache_shmcb.so -#LoadModule socache_dbm_module modules/mod_socache_dbm.so -#LoadModule socache_memcache_module modules/mod_socache_memcache.so -#LoadModule socache_redis_module modules/mod_socache_redis.so -#LoadModule watchdog_module modules/mod_watchdog.so -#LoadModule macro_module modules/mod_macro.so -#LoadModule dbd_module modules/mod_dbd.so -#LoadModule bucketeer_module modules/mod_bucketeer.so -#LoadModule dumpio_module modules/mod_dumpio.so -#LoadModule echo_module modules/mod_echo.so -#LoadModule example_hooks_module modules/mod_example_hooks.so -#LoadModule case_filter_module modules/mod_case_filter.so -#LoadModule case_filter_in_module modules/mod_case_filter_in.so -#LoadModule example_ipc_module modules/mod_example_ipc.so -#LoadModule buffer_module modules/mod_buffer.so -#LoadModule data_module modules/mod_data.so -#LoadModule ratelimit_module modules/mod_ratelimit.so -LoadModule reqtimeout_module modules/mod_reqtimeout.so -#LoadModule ext_filter_module modules/mod_ext_filter.so -#LoadModule request_module modules/mod_request.so -#LoadModule include_module modules/mod_include.so -LoadModule filter_module modules/mod_filter.so -#LoadModule reflector_module modules/mod_reflector.so -#LoadModule substitute_module modules/mod_substitute.so -#LoadModule sed_module modules/mod_sed.so -#LoadModule charset_lite_module modules/mod_charset_lite.so -#LoadModule deflate_module modules/mod_deflate.so -#LoadModule xml2enc_module modules/mod_xml2enc.so -#LoadModule proxy_html_module modules/mod_proxy_html.so -#LoadModule brotli_module modules/mod_brotli.so -LoadModule mime_module modules/mod_mime.so -#LoadModule ldap_module modules/mod_ldap.so -LoadModule log_config_module modules/mod_log_config.so -#LoadModule log_debug_module modules/mod_log_debug.so -#LoadModule log_forensic_module modules/mod_log_forensic.so -#LoadModule logio_module modules/mod_logio.so -#LoadModule lua_module modules/mod_lua.so -LoadModule env_module modules/mod_env.so -#LoadModule mime_magic_module modules/mod_mime_magic.so -#LoadModule cern_meta_module modules/mod_cern_meta.so -#LoadModule expires_module modules/mod_expires.so -LoadModule headers_module modules/mod_headers.so -#LoadModule ident_module modules/mod_ident.so -#LoadModule usertrack_module modules/mod_usertrack.so -#LoadModule unique_id_module modules/mod_unique_id.so -LoadModule setenvif_module modules/mod_setenvif.so -LoadModule version_module modules/mod_version.so -#LoadModule remoteip_module modules/mod_remoteip.so -#LoadModule proxy_module modules/mod_proxy.so -#LoadModule proxy_connect_module modules/mod_proxy_connect.so -#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so -#LoadModule proxy_http_module modules/mod_proxy_http.so -#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so -#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so -#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so -#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so -#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so -#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so -#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so -#LoadModule proxy_express_module modules/mod_proxy_express.so -#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so -#LoadModule session_module modules/mod_session.so -#LoadModule session_cookie_module modules/mod_session_cookie.so -#LoadModule session_crypto_module modules/mod_session_crypto.so -#LoadModule session_dbd_module modules/mod_session_dbd.so -#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so -#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so -LoadModule ssl_module modules/mod_ssl.so -#LoadModule optional_hook_export_module modules/mod_optional_hook_export.so -#LoadModule optional_hook_import_module modules/mod_optional_hook_import.so -#LoadModule optional_fn_import_module modules/mod_optional_fn_import.so -#LoadModule optional_fn_export_module modules/mod_optional_fn_export.so -#LoadModule dialup_module modules/mod_dialup.so -#LoadModule http2_module modules/mod_http2.so -#LoadModule proxy_http2_module modules/mod_proxy_http2.so -#LoadModule md_module modules/mod_md.so -#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so -#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so -#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so -#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so -LoadModule unixd_module modules/mod_unixd.so -#LoadModule heartbeat_module modules/mod_heartbeat.so -#LoadModule heartmonitor_module modules/mod_heartmonitor.so -#LoadModule dav_module modules/mod_dav.so -LoadModule status_module modules/mod_status.so -LoadModule autoindex_module modules/mod_autoindex.so -#LoadModule asis_module modules/mod_asis.so -#LoadModule info_module modules/mod_info.so -#LoadModule suexec_module modules/mod_suexec.so -<IfModule !mpm_prefork_module> - #LoadModule cgid_module modules/mod_cgid.so -</IfModule> -<IfModule mpm_prefork_module> - #LoadModule cgi_module modules/mod_cgi.so -</IfModule> -#LoadModule dav_fs_module modules/mod_dav_fs.so -#LoadModule dav_lock_module modules/mod_dav_lock.so -#LoadModule vhost_alias_module modules/mod_vhost_alias.so -#LoadModule negotiation_module modules/mod_negotiation.so -LoadModule dir_module modules/mod_dir.so -#LoadModule imagemap_module modules/mod_imagemap.so -#LoadModule actions_module modules/mod_actions.so -#LoadModule speling_module modules/mod_speling.so -#LoadModule userdir_module modules/mod_userdir.so -LoadModule alias_module modules/mod_alias.so -LoadModule rewrite_module modules/mod_rewrite.so - -<IfModule unixd_module> -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User daemon -Group daemon - -</IfModule> - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# <VirtualHost> definition. These values also provide defaults for -# any <VirtualHost> containers you may define later in the file. -# -# All of these directives may appear inside <VirtualHost> containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin you@example.com - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -#ServerName www.example.com:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# <Directory> blocks below. -# -<Directory /> - AllowOverride none - Require all denied -</Directory> - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# -<Directory /usr/local/apache2/htdocs> - Options Indexes FollowSymLinks - AllowOverride None - Require all granted -</Directory> - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -<VirtualHost *:80> - DocumentRoot "/usr/local/apache2/htdocs" - <Directory "/usr/local/apache2/htdocs"> - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # AllowOverride FileInfo AuthConfig Limit - # - AllowOverride None - - # - # Controls who can get stuff from this server. - # - AuthType Basic - AuthName "Restricted Content" - AuthUserFile /usr/local/apache2/conf/.htpasswd - Require valid-user - </Directory> - - ErrorLog ${APACHE_LOG_DIR}/error.log - CustomLog ${APACHE_LOG_DIR}/access.log combined -</VirtualHost> -<VirtualHost *:32000> - - ServerAdmin httpserver-onap.org - DocumentRoot "/usr/local/apache2/htdocs" - - AuthJWTSignatureAlgorithm HS256 - AuthJWTSignatureSharedSecret Q0hBTkdFTUU= - AuthJWTIss onap - <Directory "/usr/local/apache2/htdocs"> - AllowOverride None - Options Indexes FollowSymLinks MultiViews - AuthType jwt - AuthName "Restricted Content" - Require valid-user - RewriteEngine On - RewriteCond %{HTTP:Authorization} ^(.*) - RewriteRule .* - [e=HTTP_AUTHORIZATION:%1] - </Directory> - - ErrorLog ${APACHE_LOG_DIR}/error.log - CustomLog ${APACHE_LOG_DIR}/access.log combined -</VirtualHost> -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# -<IfModule dir_module> - DirectoryIndex index.html -</IfModule> - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# -<Files ".ht*"> - Require all denied -</Files> - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog ${APACHE_LOG_DIR}/error.log - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -<IfModule log_config_module> - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - <IfModule logio_module> - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - </IfModule> - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a <VirtualHost> - # container, they will be logged here. Contrariwise, if you *do* - # define per-<VirtualHost> access logfiles, transactions will be - # logged therein and *not* in this file. - # - CustomLog ${APACHE_LOG_DIR}/access.log combined - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - #CustomLog "logs/access_log" combined -</IfModule> - -<IfModule alias_module> - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a <Directory> section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" - -</IfModule> - -<IfModule cgid_module> - # - # ScriptSock: On threaded servers, designate the path to the UNIX - # socket used to communicate with the CGI daemon of mod_cgid. - # - #Scriptsock cgisock -</IfModule> - -# -# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# -<Directory "/usr/local/apache2/cgi-bin"> - AllowOverride None - Options None - Require all granted -</Directory> - -<IfModule headers_module> - # - # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied - # backend servers which have lingering "httpoxy" defects. - # 'Proxy' request header is undefined by the IETF, not listed by IANA - # - RequestHeader unset Proxy early -</IfModule> - -<IfModule mime_module> - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig conf/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - #AddType text/html .shtml - #AddOutputFilter INCLUDES .shtml -</IfModule> - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# -#MIMEMagicFile conf/magic - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# MaxRanges: Maximum number of Ranges in a request before -# returning the entire resource, or one of the special -# values 'default', 'none' or 'unlimited'. -# Default setting is to accept 200 Ranges. -#MaxRanges unlimited - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -#EnableSendfile on - -# Supplemental configuration -# -# The configuration files in the conf/extra/ directory can be -# included to add extra features or to modify the default configuration of -# the server, or you may simply copy their contents here and change as -# necessary. - -# Server-pool management (MPM specific) -#Include conf/extra/httpd-mpm.conf - -# Multi-language error messages -#Include conf/extra/httpd-multilang-errordoc.conf - -# Fancy directory listings -#Include conf/extra/httpd-autoindex.conf - -# Language settings -#Include conf/extra/httpd-languages.conf - -# User home directories -#Include conf/extra/httpd-userdir.conf - -# Real-time info on requests and configuration -#Include conf/extra/httpd-info.conf - -# Virtual hosts -#Include conf/extra/httpd-vhosts.conf - -# Local access to the Apache HTTP Server Manual -#Include conf/extra/httpd-manual.conf - -# Distributed authoring and versioning (WebDAV) -#Include conf/extra/httpd-dav.conf - -# Various default settings -#Include conf/extra/httpd-default.conf - -# Configure mod_proxy_html to understand HTML4/XHTML1 -<IfModule proxy_html_module> -Include conf/extra/proxy-html.conf -</IfModule> - -# Secure (SSL/TLS) connections -Include conf/extra/httpd-ssl.conf -# -# Note: The following must must be present to support -# starting without SSL on platforms with no /dev/random equivalent -# but a statically compiled-in mod_ssl. -# -<IfModule ssl_module> -SSLRandomSeed startup builtin -SSLRandomSeed connect builtin -</IfModule> |