diff options
Diffstat (limited to 'test/csit/scripts')
-rw-r--r-- | test/csit/scripts/aai/esr-server/startup.sh | 21 | ||||
-rw-r--r-- | test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh | 49 | ||||
-rw-r--r-- | test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh | 27 | ||||
-rwxr-xr-x | test/csit/scripts/policy/script1.sh | 143 | ||||
-rwxr-xr-x | test/csit/scripts/policy/wait_for_port.sh | 18 | ||||
-rw-r--r-- | test/csit/scripts/sdc/clone_and_setup_sdc_data.sh | 28 | ||||
-rw-r--r-- | test/csit/scripts/sdc/clone_and_setup_sdc_data.sh.orig | 67 | ||||
-rw-r--r-- | test/csit/scripts/sdc/docker_health.sh | 23 | ||||
-rw-r--r-- | test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh | 2 | ||||
-rw-r--r-- | test/csit/scripts/sdc/start_sdc_containers.sh | 47 | ||||
-rw-r--r-- | test/csit/scripts/sdc/start_sdc_sanity.sh | 70 |
11 files changed, 463 insertions, 32 deletions
diff --git a/test/csit/scripts/aai/esr-server/startup.sh b/test/csit/scripts/aai/esr-server/startup.sh new file mode 100644 index 000000000..a4d335b79 --- /dev/null +++ b/test/csit/scripts/aai/esr-server/startup.sh @@ -0,0 +1,21 @@ +#!/bin/bash +# +# Copyright 2017 ZTE Corporation. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# $1 nickname for esr server + +docker login -u docker -p docker nexus3.onap.org:10001 + +run-instance.sh nexus3.onap.org:10001/onap/aai/esr-server:latest $1 "-e MSB_IP=$2 -e MSB_Port=$3 -p 9518:9518"
\ No newline at end of file diff --git a/test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh b/test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh new file mode 100644 index 000000000..3521ff1cb --- /dev/null +++ b/test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh @@ -0,0 +1,49 @@ +#!/bin/bash +# +# ============LICENSE_START======================================================= +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END============================================ +# =================================================================== +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# + +echo "This is ${WORKSPACE}/test/csit/scripts/modeling-toscaparsers-javatoscachecker/setup_containers.sh" + +#start docker image +run-instance.sh nexus3.onap.org:10001/onap/modeling/javatoscachecker:latest modeling_javatoscachecker_1 "-p 8080:8080" + +#checker docker image is accesible: picked from clamp, some common script would be good +TIME_OUT=1200 +INTERVAL=5 +TIME=0 +while [ "$TIME" -lt "$TIME_OUT" ]; do + response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/check_template/test_me); echo $response + + if [ "$response" == "404" ]; then + echo javatoscachecker service started in $TIME seconds + break; + fi + + echo Sleep: $INTERVAL seconds before testing if javatoscachecker service is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds + sleep $INTERVAL + TIME=$(($TIME+$INTERVAL)) +done + +if [ "$TIME" -ge "$TIME_OUT" ]; then + echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests... +fi + + diff --git a/test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh b/test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh new file mode 100644 index 000000000..cca4fe193 --- /dev/null +++ b/test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh @@ -0,0 +1,27 @@ +#!/bin/bash +# +# ============LICENSE_START======================================================= +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END============================================ +# =================================================================== +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# + +echo "This is ${WORKSPACE}/test/csit/scripts/modeling-toscaparsers-javatoscachecker/teardown_containers.sh" + +kill-instance.sh modeling_javatoscachecker_1 + + diff --git a/test/csit/scripts/policy/script1.sh b/test/csit/scripts/policy/script1.sh index a005c3a84..db5b5155a 100755 --- a/test/csit/scripts/policy/script1.sh +++ b/test/csit/scripts/policy/script1.sh @@ -15,3 +15,146 @@ # limitations under the License. # echo "This is ${WORKSPACE}/test/csit/scripts/policy/script1.sh" + + +# the directory of the script +DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" +echo ${DIR} + +# the temp directory used, within $DIR +# omit the -p parameter to create a temporal directory in the default location +WORK_DIR=`mktemp -d -p "$DIR"` +echo ${WORK_DIR} + +cd ${WORK_DIR} + +# check if tmp dir was created +if [[ ! "$WORK_DIR" || ! -d "$WORK_DIR" ]]; then + echo "Could not create temp dir" + exit 1 +fi + +# bring down maven +mkdir maven +cd maven +curl -O http://apache.claz.org/maven/maven-3/3.3.9/binaries/apache-maven-3.3.9-bin.tar.gz +tar -xzvf apache-maven-3.3.9-bin.tar.gz +ls -l +export PATH=${PATH}:${WORK_DIR}/maven/apache-maven-3.3.9/bin +${WORK_DIR}/maven/apache-maven-3.3.9/bin/mvn -v +cd .. + +ifconfig + +if ! ifconfig eth0; then + if ! ifconfig ens3; then + echo "Could not determine IP address" + exit 1 + fi + export IP=`ifconfig ens3 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'` +else + export IP=`ifconfig eth0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'` +fi +echo $IP + +if ! ifconfig docker0; then + if ! ifconfig ens3; then + echo "Could not determine IP address" + exit 1 + fi + export DOCKER_IP_IP=`ifconfig ens3 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'` +else + export DOCKER_IP=`ifconfig docker0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'` +fi +echo $DOCKER_IP + +git clone http://gerrit.onap.org/r/oparent + +git clone http://gerrit.onap.org/r/policy/docker +cd docker + +${WORK_DIR}/maven/apache-maven-3.3.9/bin/mvn clean install prepare-package --settings ../oparent/settings.xml +cp policy-pe/* target/policy-pe +cp policy-drools/* target/policy-drools + +docker build -t onap/policy/policy-os policy-os +docker build -t onap/policy/policy-db policy-db +docker build -t onap/policy/policy-nexus policy-nexus +docker build -t onap/policy/policy-base policy-base +docker build -t onap/policy/policy-pe target/policy-pe +docker build -t onap/policy/policy-drools target/policy-drools + +chmod +x config/drools/drools-tweaks.sh + +echo $IP > config/pe/ip_addr.txt +ls -l config/pe/ip_addr.txt +cat config/pe/ip_addr.txt + +export MTU=9126 + +export PRELOAD_POLICIES=false +docker-compose -f docker-compose-integration.yml up -d + +if [ ! $? -eq 0 ]; then + echo "Docker compose failed" + exit 1 +fi + +docker ps + +#sleep 4m + +POLICY_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' drools` +echo ${POLICY_IP} + +PDP_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' pdp` +echo ${PDP_IP} + +PAP_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' pap` +echo ${PAP_IP} + +BRMS_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' brmsgw` +echo ${BRMS_IP} + +NEXUS_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' nexus` +echo ${NEXUS_IP} + +MARIADB_IP=`docker inspect --format '{{ .NetworkSettings.Networks.docker_default.IPAddress}}' mariadb` +echo ${MARIADB_IP} + +${DIR}/wait_for_port.sh ${MARIADB_IP} 3306 +${DIR}/wait_for_port.sh ${PAP_IP} 9091 +${DIR}/wait_for_port.sh ${PDP_IP} 8081 +${DIR}/wait_for_port.sh ${BRMS_IP} 9989 +${DIR}/wait_for_port.sh ${NEXUS_IP} 8081 +${DIR}/wait_for_port.sh ${POLICY_IP} 6969 + +TIME_OUT=600 +INTERVAL=20 +TIME=0 +while [ "$TIME" -lt "$TIME_OUT" ]; do + curl -i --user healthcheck:zb!XztG34 -H "ContentType: application/json" -H "Accept: application/json" ${POLICY_IP}:6969/healthcheck && break + + echo Sleep: $INTERVAL seconds before testing if Policy is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds + sleep $INTERVAL + TIME=$(($TIME+$INTERVAL)) + +done + +TIME_OUT=600 +INTERVAL=20 +TIME=0 +while [ "$TIME" -lt "$TIME_OUT" ]; do + + curl -i -v -H 'Content-Type: application/json' -H 'Accept: application/json' -H 'ClientAuth: cHl0aG9uOnRlc3Q=' -H 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' -H 'Environment: TEST' -X POST -d '{"policyName": ".*"}' http://${PDP_IP}:8081/pdp/api/getConfig && break + +echo Sleep: $INTERVAL seconds before testing if Policy is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds + sleep $INTERVAL + TIME=$(($TIME+$INTERVAL)) + +done + +# +# Add more sleep for everything to settle +# +sleep 3m diff --git a/test/csit/scripts/policy/wait_for_port.sh b/test/csit/scripts/policy/wait_for_port.sh new file mode 100755 index 000000000..10f08ded1 --- /dev/null +++ b/test/csit/scripts/policy/wait_for_port.sh @@ -0,0 +1,18 @@ +#!/bin/bash + +if [[ $# -ne 2 ]]; then + echo "Usage: wait-for-port hostname port" >&2 + exit 1 +fi + +host=$1 +port=$2 + +echo "Waiting for $host port $port open" +until telnet $host $port </dev/null 2>/dev/null | grep -q '^Connected'; do + sleep 1 +done + +echo "$host port $port is open" + +exit 0 diff --git a/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh index da421e4cf..c78ffe37c 100644 --- a/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh +++ b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh @@ -27,22 +27,34 @@ echo "This is ${WORKSPACE}/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh" # Clone sdc enviroment template mkdir -p ${WORKSPACE}/data/environments/ mkdir -p ${WORKSPACE}/data/clone/ +mkdir -p ${WORKSPACE}/data/logs/BE/SDC/SDC-BE +mkdir -p ${WORKSPACE}/data/logs/FE/SDC/SDC-FE +chmod -R 777 ${WORKSPACE}/data/logs +ls -lR ${WORKSPACE}/data/logs/ + cd ${WORKSPACE}/data/clone git clone --depth 1 http://gerrit.onap.org/r/sdc -b master +chmod -R 777 ${WORKSPACE}/data/clone # set enviroment variables -ENV_NAME=CSIT -MR_IP_ADDR=10.0.0.1 +export ENV_NAME='CSIT' +export MR_IP_ADDR='10.0.0.1' + +ifconfig + +#if [ -e /opt/config/public_ip.txt ] +# then +# IP_ADDRESS=$(cat /opt/config/public_ip.txt) +# else +# IP_ADDRESS=$(ifconfig ens3 | grep "inet addr" | tr -s ' ' | cut -d' ' -f3 | cut -d':' -f2) +# fi + +IP_ADDRESS=`ip route get 8.8.8.8 | awk '/src/{ print $7 }'` +export HOST_IP=$IP_ADDRESS -if [ -e /opt/config/public_ip.txt ] - then - IP_ADDRESS=$(cat /opt/config/public_ip.txt) - else - IP_ADDRESS=$(ifconfig eth0 | grep "inet addr" | tr -s ' ' | cut -d' ' -f3 | cut -d':' -f2) - fi cat ${WORKSPACE}/data/clone/sdc/sdc-os-chef/environments/Template.json | sed "s/yyy/"$IP_ADDRESS"/g" > ${WORKSPACE}/data/environments/$ENV_NAME.json sed -i "s/xxx/"$ENV_NAME"/g" ${WORKSPACE}/data/environments/$ENV_NAME.json diff --git a/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh.orig b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh.orig new file mode 100644 index 000000000..d54d513a8 --- /dev/null +++ b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh.orig @@ -0,0 +1,67 @@ +#!/bin/bash +# +# ============LICENSE_START======================================================= +# ONAP CLAMP +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END============================================ +# =================================================================== +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# + +echo "This is ${WORKSPACE}/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh" + +# Clone sdc enviroment template +mkdir -p ${WORKSPACE}/data/environments/ +mkdir -p ${WORKSPACE}/data/clone/ +mkdir -p ${WORKSPACE}/data/logs/BE/SDC/SDC-BE +mkdir -p ${WORKSPACE}/data/logs/FE/SDC/SDC-FE +chmod -R 777 ${WORKSPACE}/data/logs +<<<<<<< HEAD +======= +ls -lR ${WORKSPACE}/data/logs/ +>>>>>>> debug csit sanity failure + + +cd ${WORKSPACE}/data/clone +git clone --depth 1 http://gerrit.onap.org/r/sdc -b master + +chmod -R 775 ${WORKSPACE}/data/ + +# set enviroment variables + +export ENV_NAME='CSIT' +export MR_IP_ADDR='10.0.0.1' + +ifconfig + +#if [ -e /opt/config/public_ip.txt ] +# then +# IP_ADDRESS=$(cat /opt/config/public_ip.txt) +# else +# IP_ADDRESS=$(ifconfig ens3 | grep "inet addr" | tr -s ' ' | cut -d' ' -f3 | cut -d':' -f2) +# fi + +IP_ADDRESS=`ip route get 8.8.8.8 | awk '/src/{ print $7 }'` +export HOST_IP=$IP_ADDRESS + + + cat ${WORKSPACE}/data/clone/sdc/sdc-os-chef/environments/Template.json | sed "s/yyy/"$IP_ADDRESS"/g" > ${WORKSPACE}/data/environments/$ENV_NAME.json + sed -i "s/xxx/"$ENV_NAME"/g" ${WORKSPACE}/data/environments/$ENV_NAME.json + sed -i "s/\"ueb_url_list\":.*/\"ueb_url_list\": \""$MR_IP_ADDR","$MR_IP_ADDR"\",/g" ${WORKSPACE}/data/environments/$ENV_NAME.json + sed -i "s/\"fqdn\":.*/\"fqdn\": [\""$MR_IP_ADDR"\", \""$MR_IP_ADDR"\"]/g" ${WORKSPACE}/data/environments/$ENV_NAME.json + + diff --git a/test/csit/scripts/sdc/docker_health.sh b/test/csit/scripts/sdc/docker_health.sh new file mode 100644 index 000000000..832b25a23 --- /dev/null +++ b/test/csit/scripts/sdc/docker_health.sh @@ -0,0 +1,23 @@ +#!/bin/bash + +curl localhost:9200/_cluster/health?pretty=true + +echo "BE health-Check:" +curl http://localhost:8080/sdc2/rest/healthCheck + +echo "" +echo "" +echo "FE health-Check:" +curl http://localhost:8181/sdc1/rest/healthCheck + + +echo "" +echo "" +res=`curl -s -X GET -H "Accept: application/json" -H "Content-Type: application/json" -H "USER_ID: jh0003" "http://localhost:8080/sdc2/rest/v1/user/demo" | wc -l` +if [[ ${res} != 0 ]] +then + echo "Error [${res}] while user existance check" + exit ${res} +fi +echo "check user existance: OK" + diff --git a/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh b/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh index e03284248..48a31e895 100644 --- a/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh +++ b/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh @@ -26,6 +26,6 @@ docker rm $(docker ps -a -q --filter="name=sdc") #delete data folder -rm -rf ${WORKSPACE}/data/* +#rm -rf ${WORKSPACE}/data/* diff --git a/test/csit/scripts/sdc/start_sdc_containers.sh b/test/csit/scripts/sdc/start_sdc_containers.sh index 31105acb0..4db0485d5 100644 --- a/test/csit/scripts/sdc/start_sdc_containers.sh +++ b/test/csit/scripts/sdc/start_sdc_containers.sh @@ -25,15 +25,13 @@ echo "This is ${WORKSPACE}/test/csit/scripts/sdc/start_sdc_containers.sh" -RELEASE=latest -LOCAL=false -SKIPTESTS=false -DEP_ENV=CSIT +export RELEASE='1.1-STAGING-latest' +export DEP_ENV=$ENV_NAME #[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt) || NEXUS_USERNAME=release #[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt) || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW #[ -f /opt/config/nexus_docker_repo.txt ] && NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt) || NEXUS_DOCKER_REPO=ecomp-nexus:${PORT} #[ -f /opt/config/nexus_username.txt ] && docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO -export IP=`ifconfig eth0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'` +export IP=$HOST_IP #export PREFIX=${NEXUS_DOCKER_REPO}'/openecomp' export PREFIX='nexus3.onap.org:10001/openecomp' @@ -56,14 +54,14 @@ echo -e "" #start kibana -docker run --detach --name sdc-kbn --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 5601:5601 ${PREFIX}/sdc-kibana:${RELEASE} +#docker run --detach --name sdc-kbn --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 5601:5601 ${PREFIX}/sdc-kibana:${RELEASE} #start sdc-backend docker run --detach --name sdc-BE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 4g --memory-swap=4g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/BE/:/var/lib/jetty/logs --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 8443:8443 --publish 8080:8080 ${PREFIX}/sdc-backend:${RELEASE} echo "please wait while BE is starting..." echo "" -c=120 # seconds to wait +c=180 # seconds to wait REWRITE="\e[45D\e[1A\e[K" while [ $c -gt 0 ]; do c=$((c-1)) @@ -77,7 +75,7 @@ docker run --detach --name sdc-FE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" echo "please wait while FE is starting..." echo "" -c=120 # seconds to wait +c=160 # seconds to wait REWRITE="\e[45D\e[1A\e[K" while [ $c -gt 0 ]; do c=$((c-1)) @@ -86,23 +84,26 @@ while [ $c -gt 0 ]; do done echo -e "" +# WAIT 5 minutes maximum and test every 5 seconds if SDC up using HealthCheck API +echo " WAIT 5 minutes maximum and test every 5 seconds if SDC up using HealthCheck API...." +TIME_OUT=600 +INTERVAL=5 +TIME=0 +while [ "$TIME" -lt "$TIME_OUT" ]; do + response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/sdc2/rest/healthCheck); echo $response + if [ "$response" == "200" ]; then + echo SDC well started in $TIME seconds + break; + fi -#TIME=0 -#while [ "$TIME" -lt "$TIME_OUT" ]; do -# response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response - -# if [ "$response" == "200" ]; then -# echo Clamp and its database well started in $TIME seconds -# break; -# fi + echo Sleep: $INTERVAL seconds before testing if SDC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds + sleep $INTERVAL + TIME=$(($TIME+$INTERVAL)) +done -# echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds -# sleep $INTERVAL -# TIME=$(($TIME+$INTERVAL)) -#done +if [ "$TIME" -ge "$TIME_OUT" ]; then + echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests... +fi -#if [ "$TIME" -ge "$TIME_OUT" ]; then -# echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests... -#fi diff --git a/test/csit/scripts/sdc/start_sdc_sanity.sh b/test/csit/scripts/sdc/start_sdc_sanity.sh new file mode 100644 index 000000000..e9e92148b --- /dev/null +++ b/test/csit/scripts/sdc/start_sdc_sanity.sh @@ -0,0 +1,70 @@ +#!/bin/bash +# +# ============LICENSE_START======================================================= +# ONAP CLAMP +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights +# reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END============================================ +# =================================================================== +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# + + + +#start Sanity docker + +docker run --detach --name sdc-sanity --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 1g --memory-swap=1g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/sdc-sanity/target:/var/lib/tests/target --volume ${WORKSPACE}/data/logs/sdc-sanity/ExtentReport:/var/lib/tests/ExtentReport --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9560:9560 ${PREFIX}/sdc-sanity:${RELEASE} + +#echo "please wait while Sanity Docker is starting..." +echo "" +c=60 # seconds to wait +REWRITE="\e[45D\e[1A\e[K" +while [ $c -gt 0 ]; do + c=$((c-1)) + sleep 1 + echo -e "${REWRITE}$c" +done +echo -e "" + + +#monitor sanity process + +TIME_OUT=1200 +INTERVAL=20 +TIME=0 +while [ "$TIME" -lt "$TIME_OUT" ]; do + +PID=`docker exec -i sdc-sanity ps -ef | grep java | awk '{print $2}'` +echo sanity PID is -- $PID + +if [ -z "$PID" ] + then + echo SDC sanity finished in $TIME seconds + break + fi + + echo Sleep: $INTERVAL seconds before testing if SDC sanity completed. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds + sleep $INTERVAL + TIME=$(($TIME+$INTERVAL)) +done + +if [ "$TIME" -ge "$TIME_OUT" ] + then + echo TIME OUT: Sany was NOT completed in $TIME_OUT seconds... Could cause problems for tests... +fi +cp -rf ${WORKSPACE}/data/logs/sdc-sanity/ExtentReport/* ${WORKSPACE}/archives/ +cp -rf ${WORKSPACE}/data/logs/ ${WORKSPACE}/archives/ + |