8 files changed, 187 insertions, 5 deletions
diff --git a/test/csit/plans/aai/resources/testplan.txt b/test/csit/plans/aai/resources/testplan.txt
index 7f6727d59..79fc6d3d3 100644
--- a/test/csit/plans/aai/resources/testplan.txt
+++ b/test/csit/plans/aai/resources/testplan.txt
@@ -1,4 +1,5 @@
 # Test suites are relative paths under [integration.git]/test/csit/tests/.
 # Place the suites in run order.
-aai/resources/suite1
-aai/resources/suite2
+aai/resources/api_suite
+aai/resources/relationship_suite
+aai/resources/error_handling_suite
diff --git a/test/csit/plans/holmes-rule-management/sanity-check/setup.sh b/test/csit/plans/holmes-rule-management/sanity-check/setup.sh
index ee010a015..681a9e789 100644
--- a/test/csit/plans/holmes-rule-management/sanity-check/setup.sh
+++ b/test/csit/plans/holmes-rule-management/sanity-check/setup.sh
@@ -37,7 +37,7 @@ MSB_IP=`get-instance-ip.sh msb_internal_apigateway`
 echo MSB_IP=${MSB_IP}
 
 # Start rulemgt
-source ${SCRIPTS}/holmes/rule-management/startup.sh i-rulemgt ${DB_IP} ${MSB_IP} 80
+source ${SCRIPTS}/holmes/rule-management/startup.sh i-rulemgt ${DB_IP} ${MSB_IP} 1
 RULEMGT_IP=`get-instance-ip.sh i-rulemgt`
 echo RULEMGT_IP=${RULEMGT_IP}
 
@@ -49,7 +49,7 @@ for i in {1..20}; do
 done
 
 # Start engine-d
-source ${SCRIPTS}/holmes/engine-management/startup.sh i-engine-d ${DB_IP} ${MSB_IP} 80
+source ${SCRIPTS}/holmes/engine-management/startup.sh i-engine-d ${DB_IP} ${MSB_IP} 1
 ENGINE_D_IP=`get-instance-ip.sh i-engine-d`
 echo ENGINE_D_IP=${ENGINE_D_IP}
 
diff --git a/test/csit/plans/sdnc/healthcheck/health_check.sh b/test/csit/plans/sdnc/healthcheck/health_check.sh
new file mode 100644
index 000000000..96c99848a
--- /dev/null
+++ b/test/csit/plans/sdnc/healthcheck/health_check.sh
@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+###############################################################################
+# Copyright 2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+###############################################################################
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+echo $SCRIPTS
+
+response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck )
+
+if [ "$response" == "200" ]; then
+    echo "SDNC health check passed."
+    exit 0;
+fi
+
+echo "SDNC health check failed with response code ${response}."
+exit 1
diff --git a/test/csit/plans/sdnc/healthcheck/setup.sh b/test/csit/plans/sdnc/healthcheck/setup.sh
new file mode 100644
index 000000000..643d54fe9
--- /dev/null
+++ b/test/csit/plans/sdnc/healthcheck/setup.sh
@@ -0,0 +1,118 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+SCRIPTS="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+source ${WORKSPACE}/test/csit/scripts/sdnc/script1.sh
+
+export MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1)
+
+if [ "$MTU" == "" ]; then
+	  export MTU="1450"
+fi
+
+
+# Clone SDNC repo to get docker-compose for SDNC
+mkdir -p $WORKSPACE/archives/sdnc
+cd $WORKSPACE/archives
+git clone -b master --single-branch http://gerrit.onap.org/r/sdnc/oam.git sdnc
+cd $WORKSPACE/archives/sdnc
+git pull
+unset http_proxy https_proxy
+cd $WORKSPACE/archives/sdnc/installation/src/main/yaml
+
+sed -i "s/DMAAP_TOPIC_ENV=.*/DMAAP_TOPIC_ENV="AUTO"/g" docker-compose.yml
+docker login -u docker -p docker nexus3.onap.org:10001
+
+docker pull nexus3.onap.org:10001/onap/sdnc-image:latest
+docker tag nexus3.onap.org:10001/onap/sdnc-image:latest onap/sdnc-image:latest
+
+docker pull nexus3.onap.org:10001/onap/ccsdk-dgbuilder-image:latest
+docker tag nexus3.onap.org:10001/onap/ccsdk-dgbuilder-image:latest onap/ccsdk-dgbuilder-image:latest
+
+docker pull nexus3.onap.org:10001/onap/admportal-sdnc-image:latest
+docker tag nexus3.onap.org:10001/onap/admportal-sdnc-image:latest onap/admportal-sdnc-image:latest
+
+# start SDNC containers with docker compose and configuration from docker-compose.yml
+curl -L https://github.com/docker/compose/releases/download/1.9.0/docker-compose-`uname -s`-`uname -m` > docker-compose
+chmod +x docker-compose
+./docker-compose up -d
+
+# WAIT 5 minutes maximum and test every 5 seconds if SDNC is up using HealthCheck API
+TIME_OUT=500
+INTERVAL=30
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null -H "Authorization: Basic YWRtaW46S3A4Yko0U1hzek0wV1hsaGFrM2VIbGNzZTJnQXc4NHZhb0dHbUp2VXkyVQ==" -X POST -H "X-FromAppId: csit-sdnc" -H "X-TransactionId: csit-sdnc" -H "Accept: application/json" -H "Content-Type: application/json" http://localhost:8282/restconf/operations/SLI-API:healthcheck ); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo SDNC started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+#sleep 800
+
+TIME_OUT=1500
+INTERVAL=60
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf system:start-level)
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    echo SDNC karaf started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if SDNC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: karaf session not started in $TIME_OUT seconds... Could cause problems for testing activities...
+fi
+
+response=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf system:start-level)
+num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf bundle:list | tail -1 | cut -d\| -f1)
+
+  if [ "$response" == "Level 100" ] && [ "$num_bundles" -ge 333 ]; then
+    num_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf bundle:list | tail -1 | cut -d\| -f1)
+    num_failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf bundle:list | grep Failure | wc -l)
+    failed_bundles=$(docker exec sdnc_controller_container /opt/opendaylight/current/bin/client -u karaf bundle:list | grep Failure)
+    echo There is/are $num_failed_bundles failed bundles out of $num_bundles installed bundles.
+  fi
+
+if [ "$num_failed_bundles" -ge 1 ]; then
+  echo "The following bundle(s) are in a failed state: "
+  echo "  $failed_bundles"
+fi
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+ROBOT_VARIABLES="-v SCRIPTS:${SCRIPTS}"
+
diff --git a/test/csit/plans/sdnc/healthcheck/teardown.sh b/test/csit/plans/sdnc/healthcheck/teardown.sh
new file mode 100644
index 000000000..4d99b9f31
--- /dev/null
+++ b/test/csit/plans/sdnc/healthcheck/teardown.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+kill-instance.sh sdnc_controller_container
+kill-instance.sh sdnc_dgbuilder_container
+kill-instance.sh sdnc_portal_container
+kill-instance.sh sdnc_db_container
+
+# $WORKSPACE/archives/appc deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/plans/sdnc/healthcheck/testplan.txt b/test/csit/plans/sdnc/healthcheck/testplan.txt
new file mode 100644
index 000000000..3fa8dde53
--- /dev/null
+++ b/test/csit/plans/sdnc/healthcheck/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+sdnc/healthcheck
+
diff --git a/test/csit/plans/vnfsdk-refrepo/sanity-check/setup.sh b/test/csit/plans/vnfsdk-refrepo/sanity-check/setup.sh
index 91e931e91..e04feac41 100644
--- a/test/csit/plans/vnfsdk-refrepo/sanity-check/setup.sh
+++ b/test/csit/plans/vnfsdk-refrepo/sanity-check/setup.sh
@@ -17,9 +17,13 @@
 # These scripts are sourced by run-csit.sh.
 
 
+#Start postgres database
+docker run -d -i -t --name=postgres   -p 5432:5432 nexus3.onap.org:10001/onap/refrepo/postgres:latest
+
+POSTGRES=`docker inspect --format '{{ .NetworkSettings.IPAddress }}' postgres`
 
 #Start market place
-docker run -d -i -t --name=refrepo   -p 8702:8702 nexus3.onap.org:10001/onap/refrepo:1.0-STAGING-latest
+docker run -d -i -t --name=refrepo -e POSTGRES_IP=$POSTGRES  -p 8702:8702 nexus3.onap.org:10001/onap/refrepo:1.0-STAGING-latest
 
 # Wait for Market place initialization
 echo Wait for VNF Repository initialization
diff --git a/test/csit/plans/vnfsdk-refrepo/sanity-check/teardown.sh b/test/csit/plans/vnfsdk-refrepo/sanity-check/teardown.sh
index a42634303..19440bc79 100644
--- a/test/csit/plans/vnfsdk-refrepo/sanity-check/teardown.sh
+++ b/test/csit/plans/vnfsdk-refrepo/sanity-check/teardown.sh
@@ -18,4 +18,6 @@
 
 
 kill-instance.sh refrepo
+kill-instance.sh postgres
+