Remove obsolete start scripts

Issue-ID: SDC-2352
Signed-off-by: kaihlavi <l.kaihlavirt@partner.samsung.com>
Change-Id: Id89ccc01e0e945d69e2eb576b5efead928843535

2 files changed, 0 insertions, 187 deletions

diff --git a/scripts/sdc/start_sdc_containers.sh b/scripts/sdc/start_sdc_containers.sh
deleted file mode 100644
index 2aa43314..00000000
--- a/scripts/sdc/start_sdc_containers.sh
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-#                             reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-echo "This is ${WORKSPACE}/scripts/sdc/start_sdc_containers.sh"
-
-source ${WORKSPACE}/data/clone/sdc/version.properties
-export RELEASE=$major.$minor-STAGING-latest
-export DEP_ENV=$ENV_NAME
-#[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)    || NEXUS_USERNAME=release
-#[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)      || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW
-#[ -f /opt/config/nexus_docker_repo.txt ] && NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt) || NEXUS_DOCKER_REPO=ecomp-nexus:${PORT}
-#[ -f /opt/config/nexus_username.txt ] && docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
-export IP=$HOST_IP
-#export PREFIX=${NEXUS_DOCKER_REPO}'/openecomp'
-export PREFIX='nexus3.onap.org:10001/openecomp'
-
-
-function monitor_docker {
-
-echo monitor $1 Docker
-sleep 5
-TIME_OUT=800
-INTERVAL=20
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-
-MATCH=`docker logs --tail 30 $1 | grep "DOCKER STARTED"`
-echo MATCH is -- $MATCH
-
-if [ -n "$MATCH" ]
- then
-    echo DOCKER start finished in $TIME seconds
-    break
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if $1 DOCKER is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]
- then
-   echo -e "\e[1;31mTIME OUT: DOCKER was NOT fully started in $TIME_OUT seconds... Could cause problems ...\e[0m"
-fi
-
-
-}
-
-#start Elastic-Search
-docker run --detach --name sdc-es --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --memory 1g --memory-swap=1g --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro -e ES_HEAP_SIZE=1024M --volume ${WORKSPACE}/data/ES:/usr/share/elasticsearch/data --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9200:9200 --publish 9300:9300 ${PREFIX}/sdc-elasticsearch:${RELEASE}
-
-#start cassandra
-docker run --detach --name sdc-cs --env RELEASE="${RELEASE}" --env ENVNAME="${DEP_ENV}" --env HOST_IP=${IP} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/CS:/var/lib/cassandra --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9042:9042 --publish 9160:9160 ${PREFIX}/sdc-cassandra:${RELEASE}
-
-echo "please wait while CS is starting..."
-monitor_docker sdc-cs
-
-
-#start kibana
-#docker run --detach --name sdc-kbn --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 5601:5601 ${PREFIX}/sdc-kibana:${RELEASE}
-
-#start sdc-backend
-docker run --detach --name sdc-BE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 4g --memory-swap=4g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/BE/:/var/lib/jetty/logs  --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 8443:8443 --publish 8080:8080 ${PREFIX}/sdc-backend:${RELEASE}
-
-echo "please wait while BE is starting..."
-monitor_docker sdc-BE
-
-#start Front-End
-docker run --detach --name sdc-FE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro  --volume ${WORKSPACE}/data/logs/FE/:/var/lib/jetty/logs --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9443:9443 --publish 8181:8181 ${PREFIX}/sdc-frontend:${RELEASE}
-
-echo "docker run sdc-frontend..."
-monitor_docker sdc-FE
-
-echo " WAIT 1 minutes maximum and test every 5 seconds if SDC up using HealthCheck API...."
-
-TIME_OUT=60
-INTERVAL=5
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/sdc2/rest/healthCheck); echo $response
-
-  if [ "$response" == "200" ]; then
-    echo SDC well started in $TIME seconds
-    break;
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if SDC is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]; then
-   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
-fi
-
diff --git a/scripts/sdc/start_sdc_sanity.sh b/scripts/sdc/start_sdc_sanity.sh
deleted file mode 100644
index 2b553136..00000000
--- a/scripts/sdc/start_sdc_sanity.sh
+++ /dev/null
@@ -1,71 +0,0 @@
-#!/bin/bash
-#
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-#                             reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-#
-
-
-
-#start Sanity docker
-
-docker run --detach --name sdc-sanity --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/sdc-sanity/target:/var/lib/tests/target --volume ${WORKSPACE}/data/logs/sdc-sanity/ExtentReport:/var/lib/tests/ExtentReport --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9560:9560 ${PREFIX}/sdc-sanity:${RELEASE}
-
-#echo "please wait while Sanity Docker is starting..."
-echo ""
-c=60 # seconds to wait
-REWRITE="\e[45D\e[1A\e[K"
-while [ $c -gt 0 ]; do
-    c=$((c-1))
-    sleep 1
-    echo -e "${REWRITE}$c"
-done
-echo -e ""
-
-
-#monitor sanity process 
-
-TIME_OUT=1200
-INTERVAL=20
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  
-PID=`docker exec -i sdc-sanity ps -ef | grep java | awk '{print $2}'`
-echo sanity PID is -- $PID
-  
-if [ -z "$PID" ]
- then
-    echo SDC sanity finished in $TIME seconds
-    break
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if SDC sanity completed. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]
- then
-   echo TIME OUT: Sany was NOT completed in $TIME_OUT seconds... Could cause problems for tests...
-fi
-cp -rf ${WORKSPACE}/data/logs/sdc-sanity/ExtentReport/* ${WORKSPACE}/archives/
-cp -rf ${WORKSPACE}/data/logs/ ${WORKSPACE}/archives/ 
-cp -rf ${WORKSPACE}/data/logs/sdc-sanity/target/*.xml ${WORKSPACE}/archives/ 
-