Drop using symlinks for documentation markup rendering

Keeping only symlinks as the markup indicator does not trigger CI on
relevant patches changing documentation contents (there's no change in
symlink).

This can be resolved by dropping symlinks usage entirely. Sphinx and RTD
aren't going anywhere anytime soon.

To make sure all symlinks were replaced following one-liner was used:

$ find . -type l -name "*.rst" -exec readlink -e {} \; \
  | xargs -I% git mv -f %{,.rst}

which finds all the symlinks in the repo with "*.rst" suffix, then reads
which file they link to and finally replaces given symlink with that
file.

This solution was suggested by:
Bartek Grzybowski <b.grzybowski@partner.samsung.com>

Issue-ID: INT-1672
Change-Id: I120e216b0b48032bb7b80c23cad799cd6f7cca53
Signed-off-by: Pawel Wieczorek <p.wieczorek2@samsung.com>

4 files changed, 180 insertions, 182 deletions

diff --git a/test/security/k8s/README b/test/security/k8s/README
deleted file mode 100644
index b9e2dd5d2..000000000
--- a/test/security/k8s/README
+++ /dev/null
@@ -1,45 +0,0 @@
-##############################
-K8s secure configuration check
-##############################
-
-Utility for checking if Kubernetes cluster configuration follows security recommendations.
-
-***************
-Getting started
-***************
-
-Prerequisites
-=============
-
-Build
------
-
-- make
-- go_
-
-.. _go: https://golang.org/doc/install
-
-Test
-----
-
-- Ginkgo_
-
-.. _Ginkgo: https://onsi.github.io/ginkgo/#getting-ginkgo
-
-Running
-=======
-
-Calling::
-
-  make run
-
-will build and run configuration check executable. It is the default target.
-
-Testing
-=======
-
-Calling::
-
-  make test
-
-will run tests.
diff --git a/test/security/k8s/README.rst b/test/security/k8s/README.rst
index 100b93820..b9e2dd5d2 120000..100644
--- a/test/security/k8s/README.rst
+++ b/test/security/k8s/README.rst
@@ -1 +1,45 @@
-README
\ No newline at end of file
+##############################
+K8s secure configuration check
+##############################
+
+Utility for checking if Kubernetes cluster configuration follows security recommendations.
+
+***************
+Getting started
+***************
+
+Prerequisites
+=============
+
+Build
+-----
+
+- make
+- go_
+
+.. _go: https://golang.org/doc/install
+
+Test
+----
+
+- Ginkgo_
+
+.. _Ginkgo: https://onsi.github.io/ginkgo/#getting-ginkgo
+
+Running
+=======
+
+Calling::
+
+  make run
+
+will build and run configuration check executable. It is the default target.
+
+Testing
+=======
+
+Calling::
+
+  make test
+
+will run tests.
diff --git a/test/security/sslendpoints/README b/test/security/sslendpoints/README
deleted file mode 100644
index 257946d88..000000000
--- a/test/security/sslendpoints/README
+++ /dev/null
@@ -1,135 +0,0 @@
-=====================
- SSL endpoints check
-=====================
-
-Utility for checking if all of the ports exposed outside of Kubernetes cluster
-use SSL tunnels.
-
-Prerequisites
--------------
-
-Configuration
-~~~~~~~~~~~~~
-
-``-kubeconfig``
-  Optional unless ``$HOME`` is not set. Defaults to ``$HOME/.kube/config``.
-
-``-xfail``
-  Optional list of services with corresponding NodePorts which do not use SSL
-  tunnels. These ports are known as "expected failures" and will not be
-  checked.
-
-Dependencies
-~~~~~~~~~~~~
-
-- nmap_
-
-.. _nmap: https://nmap.org/book/install.html
-
-Build (local)
-~~~~~~~~~~~~~
-
-- go_ (1.11+, tested on 1.13)
-
-.. _go: https://golang.org/doc/install
-
-Build (Docker)
-~~~~~~~~~~~~~~
-
-- Docker_ engine
-- make (optional)
-
-.. _Docker: https://docs.docker.com/install
-
-Test
-~~~~
-
-- Ginkgo_
-- GolangCI-Lint_ (optional)
-
-.. _Ginkgo: https://onsi.github.io/ginkgo/#getting-ginkgo
-.. _GolangCI-Lint: https://github.com/golangci/golangci-lint#install
-
-Building
---------
-
-Command (local)
-~~~~~~~~~~~~~~~
-
-.. code-block:: shell
-
-    $ mkdir bin
-    $ go build -o bin/sslendpoints
-
-Additional ``bin`` directory and specifying ``go build`` output are used to
-declutter project and maintain compatibility with Docker-based process. Running
-``go build`` without parameters will create ``sslendpoints`` binary in current
-directory.
-
-Command (Docker)
-~~~~~~~~~~~~~~~~
-
-.. code-block:: shell
-
-    $ make # or commands from corresponding "make" targets
-
-
-Running
--------
-
-Command (local)
-~~~~~~~~~~~~~~~
-
-.. code-block:: shell
-
-    $ bin/sslendpoints [-kubeconfig KUBECONFIG] [-xfail XFAIL]
-
-Command (Docker)
-~~~~~~~~~~~~~~~~
-
-.. code-block:: shell
-
-    $ docker run --rm --volume $KUBECONFIG:/.kube/config \
-        sslendpoints-build-img /bin/sslendpoints
-
-    $ docker run --rm --volume $KUBECONFIG:/opt/config \
-        sslendpoints-build-img /bin/sslendpoints -kubeconfig /opt/config
-
-    $ docker run --rm \
-        --volume $KUBECONFIG:/opt/config \
-        --volume $XFAIL:/opt/xfail \
-        sslendpoints-build-img /bin/sslendpoints \
-            -kubeconfig /opt/config
-            -xfail /opt/xfail
-
-Output
-~~~~~~
-
-.. code-block:: shell
-
-    $ ./sslendpoints -kubeconfig ~/.kube/config.onap
-    2020/03/17 10:40:29 Host 192.168.2.10
-    2020/03/17 10:40:29 PORT        SERVICE
-    2020/03/17 10:40:29 30203       sdnc-dgbuilder
-    2020/03/17 10:40:29 30204       sdc-be
-    2020/03/17 10:40:29 30207       sdc-fe
-    2020/03/17 10:40:29 30220       aai-sparky-be
-    2020/03/17 10:40:29 30226       message-router
-    2020/03/17 10:40:29 30233       aai
-    2020/03/17 10:40:29 30256       sdc-wfd-fe
-    2020/03/17 10:40:29 30257       sdc-wfd-be
-    2020/03/17 10:40:29 30264       sdc-dcae-fe
-    2020/03/17 10:40:29 30266       sdc-dcae-dt
-    2020/03/17 10:40:29 30279       aai-babel
-    2020/03/17 10:40:29 30406       so-vnfm-adapter
-    2020/03/17 10:40:29 There are 12 non-SSL NodePorts in the cluster
-
-
-Testing
--------
-
-.. code-block:: shell
-
-    $ go test ./...     # basic
-    $ ginkgo -r         # pretty
-    $ golangci-lint run # linters
diff --git a/test/security/sslendpoints/README.rst b/test/security/sslendpoints/README.rst
index 100b93820..257946d88 120000..100644
--- a/test/security/sslendpoints/README.rst
+++ b/test/security/sslendpoints/README.rst
@@ -1 +1,135 @@
-README
\ No newline at end of file
+=====================
+ SSL endpoints check
+=====================
+
+Utility for checking if all of the ports exposed outside of Kubernetes cluster
+use SSL tunnels.
+
+Prerequisites
+-------------
+
+Configuration
+~~~~~~~~~~~~~
+
+``-kubeconfig``
+  Optional unless ``$HOME`` is not set. Defaults to ``$HOME/.kube/config``.
+
+``-xfail``
+  Optional list of services with corresponding NodePorts which do not use SSL
+  tunnels. These ports are known as "expected failures" and will not be
+  checked.
+
+Dependencies
+~~~~~~~~~~~~
+
+- nmap_
+
+.. _nmap: https://nmap.org/book/install.html
+
+Build (local)
+~~~~~~~~~~~~~
+
+- go_ (1.11+, tested on 1.13)
+
+.. _go: https://golang.org/doc/install
+
+Build (Docker)
+~~~~~~~~~~~~~~
+
+- Docker_ engine
+- make (optional)
+
+.. _Docker: https://docs.docker.com/install
+
+Test
+~~~~
+
+- Ginkgo_
+- GolangCI-Lint_ (optional)
+
+.. _Ginkgo: https://onsi.github.io/ginkgo/#getting-ginkgo
+.. _GolangCI-Lint: https://github.com/golangci/golangci-lint#install
+
+Building
+--------
+
+Command (local)
+~~~~~~~~~~~~~~~
+
+.. code-block:: shell
+
+    $ mkdir bin
+    $ go build -o bin/sslendpoints
+
+Additional ``bin`` directory and specifying ``go build`` output are used to
+declutter project and maintain compatibility with Docker-based process. Running
+``go build`` without parameters will create ``sslendpoints`` binary in current
+directory.
+
+Command (Docker)
+~~~~~~~~~~~~~~~~
+
+.. code-block:: shell
+
+    $ make # or commands from corresponding "make" targets
+
+
+Running
+-------
+
+Command (local)
+~~~~~~~~~~~~~~~
+
+.. code-block:: shell
+
+    $ bin/sslendpoints [-kubeconfig KUBECONFIG] [-xfail XFAIL]
+
+Command (Docker)
+~~~~~~~~~~~~~~~~
+
+.. code-block:: shell
+
+    $ docker run --rm --volume $KUBECONFIG:/.kube/config \
+        sslendpoints-build-img /bin/sslendpoints
+
+    $ docker run --rm --volume $KUBECONFIG:/opt/config \
+        sslendpoints-build-img /bin/sslendpoints -kubeconfig /opt/config
+
+    $ docker run --rm \
+        --volume $KUBECONFIG:/opt/config \
+        --volume $XFAIL:/opt/xfail \
+        sslendpoints-build-img /bin/sslendpoints \
+            -kubeconfig /opt/config
+            -xfail /opt/xfail
+
+Output
+~~~~~~
+
+.. code-block:: shell
+
+    $ ./sslendpoints -kubeconfig ~/.kube/config.onap
+    2020/03/17 10:40:29 Host 192.168.2.10
+    2020/03/17 10:40:29 PORT        SERVICE
+    2020/03/17 10:40:29 30203       sdnc-dgbuilder
+    2020/03/17 10:40:29 30204       sdc-be
+    2020/03/17 10:40:29 30207       sdc-fe
+    2020/03/17 10:40:29 30220       aai-sparky-be
+    2020/03/17 10:40:29 30226       message-router
+    2020/03/17 10:40:29 30233       aai
+    2020/03/17 10:40:29 30256       sdc-wfd-fe
+    2020/03/17 10:40:29 30257       sdc-wfd-be
+    2020/03/17 10:40:29 30264       sdc-dcae-fe
+    2020/03/17 10:40:29 30266       sdc-dcae-dt
+    2020/03/17 10:40:29 30279       aai-babel
+    2020/03/17 10:40:29 30406       so-vnfm-adapter
+    2020/03/17 10:40:29 There are 12 non-SSL NodePorts in the cluster
+
+
+Testing
+-------
+
+.. code-block:: shell
+
+    $ go test ./...     # basic
+    $ ginkgo -r         # pretty
+    $ golangci-lint run # linters