add csit healthchek test

Change-Id: I20c5016dc80be59e5a4b7b081e2fdd8c7983dd39
Issue-Id: SDC-357
Signed-off-by: Yuli Shlosberg <ys9693@att.com>

3 files changed, 191 insertions, 0 deletions

diff --git a/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh
new file mode 100644
index 000000000..da421e4cf
--- /dev/null
+++ b/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh
@@ -0,0 +1,52 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+echo "This is ${WORKSPACE}/test/csit/scripts/sdc/clone_and_setup_sdc_data.sh"
+
+# Clone sdc enviroment template 
+mkdir -p ${WORKSPACE}/data/environments/
+mkdir -p ${WORKSPACE}/data/clone/
+
+cd ${WORKSPACE}/data/clone
+git clone --depth 1 http://gerrit.onap.org/r/sdc -b master
+
+
+# set enviroment variables
+
+ENV_NAME=CSIT
+MR_IP_ADDR=10.0.0.1
+
+if [ -e /opt/config/public_ip.txt ]
+  then
+    IP_ADDRESS=$(cat /opt/config/public_ip.txt)
+   else
+    IP_ADDRESS=$(ifconfig eth0 | grep "inet addr" | tr -s ' ' | cut -d' ' -f3 | cut -d':' -f2)
+   fi
+   
+  cat ${WORKSPACE}/data/clone/sdc/sdc-os-chef/environments/Template.json | sed "s/yyy/"$IP_ADDRESS"/g" > ${WORKSPACE}/data/environments/$ENV_NAME.json
+  sed -i "s/xxx/"$ENV_NAME"/g" ${WORKSPACE}/data/environments/$ENV_NAME.json
+  sed -i "s/\"ueb_url_list\":.*/\"ueb_url_list\": \""$MR_IP_ADDR","$MR_IP_ADDR"\",/g" ${WORKSPACE}/data/environments/$ENV_NAME.json
+  sed -i "s/\"fqdn\":.*/\"fqdn\": [\""$MR_IP_ADDR"\", \""$MR_IP_ADDR"\"]/g" ${WORKSPACE}/data/environments/$ENV_NAME.json
+
+
diff --git a/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh b/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh
new file mode 100644
index 000000000..e03284248
--- /dev/null
+++ b/test/csit/scripts/sdc/kill_containers_and_remove_dataFolders.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+
+echo "This is ${WORKSPACE}/test/csit/scripts/sdc/kill_and_remove_dataFolder.sh"
+
+#kill and remove all sdc dockers
+docker stop $(docker ps -a -q --filter="name=sdc")
+docker rm $(docker ps -a -q --filter="name=sdc")
+
+
+#delete data folder
+
+rm -rf ${WORKSPACE}/data/*
+
+
diff --git a/test/csit/scripts/sdc/start_sdc_containers.sh b/test/csit/scripts/sdc/start_sdc_containers.sh
new file mode 100644
index 000000000..31105acb0
--- /dev/null
+++ b/test/csit/scripts/sdc/start_sdc_containers.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+echo "This is ${WORKSPACE}/test/csit/scripts/sdc/start_sdc_containers.sh"
+
+
+RELEASE=latest
+LOCAL=false
+SKIPTESTS=false
+DEP_ENV=CSIT
+#[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)    || NEXUS_USERNAME=release
+#[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)      || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW
+#[ -f /opt/config/nexus_docker_repo.txt ] && NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt) || NEXUS_DOCKER_REPO=ecomp-nexus:${PORT}
+#[ -f /opt/config/nexus_username.txt ] && docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
+export IP=`ifconfig eth0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
+#export PREFIX=${NEXUS_DOCKER_REPO}'/openecomp'
+export PREFIX='nexus3.onap.org:10001/openecomp'
+
+#start Elastic-Search
+docker run --detach --name sdc-es --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --memory 1g --memory-swap=1g --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro -e ES_HEAP_SIZE=1024M --volume ${WORKSPACE}/data/ES:/usr/share/elasticsearch/data --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9200:9200 --publish 9300:9300 ${PREFIX}/sdc-elasticsearch:${RELEASE}
+
+#start cassandra
+docker run --detach --name sdc-cs --env RELEASE="${RELEASE}" --env ENVNAME="${DEP_ENV}" --env HOST_IP=${IP} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/CS:/var/lib/cassandra --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9042:9042 --publish 9160:9160 ${PREFIX}/sdc-cassandra:${RELEASE}
+
+echo "please wait while CS is starting..."
+echo ""
+c=120 # seconds to wait
+REWRITE="\e[25D\e[1A\e[K"
+while [ $c -gt 0 ]; do
+    c=$((c-1))
+    sleep 1
+    echo -e "${REWRITE}$c"
+done
+echo -e ""
+
+
+#start kibana
+docker run --detach --name sdc-kbn --env ENVNAME="${DEP_ENV}" --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 5601:5601 ${PREFIX}/sdc-kibana:${RELEASE}
+
+#start sdc-backend
+docker run --detach --name sdc-BE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 4g --memory-swap=4g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/BE/:/var/lib/jetty/logs  --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 8443:8443 --publish 8080:8080 ${PREFIX}/sdc-backend:${RELEASE}
+
+echo "please wait while BE is starting..."
+echo ""
+c=120 # seconds to wait
+REWRITE="\e[45D\e[1A\e[K"
+while [ $c -gt 0 ]; do
+    c=$((c-1))
+    sleep 1
+    echo -e "${REWRITE}$c"
+done
+echo -e ""
+
+#start Front-End
+docker run --detach --name sdc-FE --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 2g --memory-swap=2g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro  --volume ${WORKSPACE}/data/logs/FE/:/var/lib/jetty/logs --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9443:9443 --publish 8181:8181 ${PREFIX}/sdc-frontend:${RELEASE}
+
+echo "please wait while FE is starting..."
+echo ""
+c=120 # seconds to wait
+REWRITE="\e[45D\e[1A\e[K"
+while [ $c -gt 0 ]; do
+    c=$((c-1))
+    sleep 1
+    echo -e "${REWRITE}$c"
+done
+echo -e ""
+
+
+
+
+#TIME=0
+#while [ "$TIME" -lt "$TIME_OUT" ]; do
+#  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
+
+#  if [ "$response" == "200" ]; then
+#    echo Clamp and its database well started in $TIME seconds
+#    break;
+#  fi
+
+#  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+#  sleep $INTERVAL
+# TIME=$(($TIME+$INTERVAL))
+#done
+
+#if [ "$TIME" -ge "$TIME_OUT" ]; then
+#   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+#fi