Rename optf base dir to optf-has

Issue-ID: OPTFRA-171

Change-Id: I19d7b8c38bf324171b7204499114e79839cc9c18
Signed-off-by: Leonardo Bellini <leonardo.bellini@att.com>

4 files changed, 0 insertions, 477 deletions

diff --git a/test/csit/scripts/optf/has/has-properties/cert.cer b/test/csit/scripts/optf/has/has-properties/cert.cer
deleted file mode 100644
index 67bb1303a..000000000
--- a/test/csit/scripts/optf/has/has-properties/cert.cer
+++ /dev/null
@@ -1,36 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIGFjCCBP6gAwIBAgIQaTKJblnN1egdvyJmqxK6TDANBgkqhkiG9w0BAQsFADB+
-MQswCQYDVQQGEwJVUzEdMBsGA1UEChMUU3ltYW50ZWMgQ29ycG9yYXRpb24xHzAd
-BgNVBAsTFlN5bWFudGVjIFRydXN0IE5ldHdvcmsxLzAtBgNVBAMTJlN5bWFudGVj
-IENsYXNzIDMgU2VjdXJlIFNlcnZlciBDQSAtIEc0MB4XDTE3MDgzMTAwMDAwMFoX
-DTE4MDgzMTIzNTk1OVowgY8xCzAJBgNVBAYTAlVTMREwDwYDVQQIDAhNaWNoaWdh
-bjETMBEGA1UEBwwKU291dGhmaWVsZDEcMBoGA1UECgwTQVQmVCBTZXJ2aWNlcywg
-SW5jLjESMBAGA1UECwwJQ29uZHVjdG9yMSYwJAYDVQQDDB1lY29tcC1wZXctOTct
-MDE3LnBlZGMuc2JjLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEB
-ANiCKEitPcCKcmTTmvuwItG34wVOhhWuha1GQ9KeW/JmKgDWYM/7BwKmT6FhrSWe
-998UKHKC+MriZKI6WsBoENu070zTyyphQ0SwTw7QZbeCpgrvSBv6+q9qWpkGZEQN
-OgZ4IOVQX1asqh+qmUuVKWIAN1AF60iMb+Krqr04FX/N+3N9wLFfOJIS80Ycrxwa
-2Kjqza9awVXOtuTHPa4hFqz7ggRoi7Ybdr8GyxNoXTP0QNCBsYYmjuTFnbfCnC/j
-d/1zMn3D6G4eihnTnUB9jhM+Jj85IXcgAG5um/jEjN7qxmi+kURFl6AbadmgTCca
-aIW1rOHZtR4vlA/sRWqSh28CAwEAAaOCAnwwggJ4MCgGA1UdEQQhMB+CHWVjb21w
-LXBldy05Ny0wMTcucGVkYy5zYmMuY29tMAkGA1UdEwQCMAAwDgYDVR0PAQH/BAQD
-AgWgMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEFBQcDAjBhBgNVHSAEWjBYMFYG
-BmeBDAECAjBMMCMGCCsGAQUFBwIBFhdodHRwczovL2Quc3ltY2IuY29tL2NwczAl
-BggrBgEFBQcCAjAZDBdodHRwczovL2Quc3ltY2IuY29tL3JwYTAfBgNVHSMEGDAW
-gBRfYM9hkFXfhEMUimAqsvV69EMY7zArBgNVHR8EJDAiMCCgHqAchhpodHRwOi8v
-c3Muc3ltY2IuY29tL3NzLmNybDBXBggrBgEFBQcBAQRLMEkwHwYIKwYBBQUHMAGG
-E2h0dHA6Ly9zcy5zeW1jZC5jb20wJgYIKwYBBQUHMAKGGmh0dHA6Ly9zcy5zeW1j
-Yi5jb20vc3MuY3J0MIIBBgYKKwYBBAHWeQIEAgSB9wSB9ADyAHcA3esdK3oNT6Yg
-i4GtgWhwfi6OnQHVXIiNPRHEzbbsvswAAAFeOADGyAAABAMASDBGAiEAzYxTfoKt
-RnxlePKnJ0sCqLOvdd223T7CjqNsqbgmxfECIQC6FOBOe9J+a1poasZ7QfCVl9g2
-McAdcKofxp21Qw1DhwB3AKS5CZC0GFgUh7sTosxncAo8NZgE+RvfuON3zQ7IDdwQ
-AAABXjgAxuAAAAQDAEgwRgIhAIUbjCQBxcxAXBT3MS77jIR3Lw90Y622+JGAuhH7
-PASuAiEAzblNSNu2GDHu/KINsiX4apBzXgSw5J8BM9LCAYPmUogwDQYJKoZIhvcN
-AQELBQADggEBAIwOqd+U0iRFSt68vWh1ErMeY0I7Re/81cm17cAn1cQuhTNKFUwq
-lYnVXZHFBkGhVAU0vXAI59XN29TQ3sjBlmfDdtxAJ3PzITBxeHswJjnqCaslEGik
-sbdK4/cwCjWmAN0azKtUmKhH3ajnjyduWdlvCx5hsUdFmYGZ1yl+1QbTrwkkU9JB
-bYjHNbtca0Orq8JlfZlc6L9vO6LNU6+qa9NTkLs2qd3rsCOXUiAWhGBdARB+a0AT
-1ukrZDS2BZ6fUDmG2XxUsRPqUwuVNAb8NgOc0zLNaAe8CpU6fVzek1fZnL0KkJmK
-jJnnuCr6AOteod19VIChd54mo0QtFm+i/Ww=
------END CERTIFICATE-----
-
diff --git a/test/csit/scripts/optf/has/has-properties/cert.key b/test/csit/scripts/optf/has/has-properties/cert.key
deleted file mode 100644
index b8a957ff8..000000000
--- a/test/csit/scripts/optf/has/has-properties/cert.key
+++ /dev/null
@@ -1,28 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA2IIoSK09wIpyZNOa+7Ai0bfjBU6GFa6FrUZD0p5b8mYqANZg
-z/sHAqZPoWGtJZ733xQocoL4yuJkojpawGgQ27TvTNPLKmFDRLBPDtBlt4KmCu9I
-G/r6r2pamQZkRA06Bngg5VBfVqyqH6qZS5UpYgA3UAXrSIxv4quqvTgVf837c33A
-sV84khLzRhyvHBrYqOrNr1rBVc625Mc9riEWrPuCBGiLtht2vwbLE2hdM/RA0IGx
-hiaO5MWdt8KcL+N3/XMyfcPobh6KGdOdQH2OEz4mPzkhdyAAbm6b+MSM3urGaL6R
-REWXoBtp2aBMJxpohbWs4dm1Hi+UD+xFapKHbwIDAQABAoIBAQCQVn1arjwL34CR
-3UxmXK9p1si/YfEcBURTFxPiFva/bAK2mjTikrzCtHND6GVRPmCLVNn+NXh9cV6b
-lIGp4fbTMhWSx2ObdkotQckC3EXjiHL/uTP+i1ySkzmg6NTxVUwIwg9UMTfOBcBI
-6ifWbrOvBOvbKocHz7BLkhx6lygmEccyiy3wD/a/NBTRFTBLFyGrNBh2/a9ZXRqs
-Gz1IxVSdxrNJZUoi1nKbBTOX5lKyjL0AyAkIEzC4MvgEBcGz5xZHFRF1cj4x0ajc
-xEDsRUv0hi3Vczw5/FfKVWUVQPmY7sqpLtvu9qnb9MeZFwtrVZBxG5Ik4LP0Sjxt
-0B1+EHYpAoGBAPeOpR1co9pJa8tgkObZWehrVd+VEMD9UM5SKfYYn/2FyVMl1/TH
-Z6SqB7e1aNYsT5oUDt5y3g+tG3i/r4zmE4OzwT/9neb/rVBsKdd5cPICVnhHajYu
-bdOKoCNEMBrQRBSBAeSK0IjbUYIMyre1bwhxU7HT5NzGJnLYBn4vx0BNAoGBAN/k
-bxLQpsYcMwAX4K0H42qI1yL4jlezv4zj+kDRAI9Szh94c2yxGBC4rAub3Igz1OlQ
-CfqPimvlnkWrhgz50+0CdJFPEQyC0+d2rzS7i816k8WYUYCDkrTJhr64eFnV1jjs
-AuLpnhF0WpqvrixBzf5ZENPV3C8k4HG4KrYjDuSrAoGBALeDELdRY01/u97JuODI
-IrP+TWwujnrhzbMEiYKbAo7nTDTNCuezogsY2BvA6PRLaL7pO5R/RkoMox7ByhsC
-u1iYOht7oEALLKk/ZU0MA0QDo6IKHpwHkvaL/uXluFtIJA+nCoYmuSuamTN01BmW
-77YsfESItVFLuljL9xQ3ytbJAoGAVqkd0SOQGgiaOQQFBBSUkwzqcO/ScOHzV756
-hBIh7Ff5zraZvs2Bah+BAHFQ2Ctv0usXIbPjuUXEkGUG2wjsXcXghsoa6EPPb71B
-reCWCW/TuNzvVxYWeAG1NSdD9knNxHSd3WTduRXXaB5uBVVnPXcOC2Cw/FKCyaGm
-bp99SUcCgYEAxzGq0cxFedF7TAQLjIMagsGIAatokzDvvQOvOK0lWZ+f17G+LV9Y
-tLpnvS6IdGnki6Kvg9Xa0F4eP7YoY4laHxl2DEceP/TeMLNHetM9cXCPKwP7w/24
-5mZlQ0t/HdVnjc1uDvkeHR6HVxnXTyWtKBJ0FtC6SfdRgK20YYFrKAQ=
------END RSA PRIVATE KEY-----
-
diff --git a/test/csit/scripts/optf/has/has-properties/conductor.conf.onap b/test/csit/scripts/optf/has/has-properties/conductor.conf.onap
deleted file mode 100644
index 9770f5194..000000000
--- a/test/csit/scripts/optf/has/has-properties/conductor.conf.onap
+++ /dev/null
@@ -1,332 +0,0 @@
-
-[DEFAULT]
-
-#
-# From conductor
-#
-
-# Configuration file for WSGI definition of API. (string value)
-#api_paste_config = api_paste.ini
-
-# Music keyspace for content (string value)
-keyspace = conductor_saisree
-
-#
-# From oslo.log
-#
-
-# If set to true, the logging level will be set to DEBUG instead of the default
-# INFO level. (boolean value)
-# Note: This option can be changed without restarting.
-debug = true
-
-# DEPRECATED: If set to false, the logging level will be set to WARNING instead
-# of the default INFO level. (boolean value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-#verbose = true
-
-# The name of a logging configuration file. This file is appended to any
-# existing logging configuration files. For details about logging configuration
-# files, see the Python logging module documentation. Note that when logging
-# configuration files are used then all logging configuration is set in the
-# configuration file and other logging configuration options are ignored (for
-# example, logging_context_format_string). (string value)
-# Note: This option can be changed without restarting.
-# Deprecated group/name - [DEFAULT]/log_config
-#log_config_append = /home/saisree/conductor/etc/conductor/log.conf
-
-# Defines the format string for %%(asctime)s in log records. Default:
-# %(default)s . This option is ignored if log_config_append is set. (string
-# value)
-log_date_format = %d-%m-%Y %H:%M:%S
-
-# (Optional) Name of log file to send logging output to. If no default is set,
-# logging will go to stderr as defined by use_stderr. This option is ignored if
-# log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logfile
-#log_file = application.log
-
-
-# (Optional) The base directory used for relative log_file  paths. This option
-# is ignored if log_config_append is set. (string value)
-# Deprecated group/name - [DEFAULT]/logdir
-#log_dir = /home/saisree/Log/
-
-
-
-
-# Uses logging handler designed to watch file system. When log file is moved or
-# removed this handler will open a new log file with specified path
-# instantaneously. It makes sense only if log_file option is specified and
-# Linux platform is used. This option is ignored if log_config_append is set.
-# (boolean value)
-#watch_log_file = false
-
-# Use syslog for logging. Existing syslog format is DEPRECATED and will be
-# changed later to honor RFC5424. This option is ignored if log_config_append
-# is set. (boolean value)
-#use_syslog = false
-
-# Syslog facility to receive log lines. This option is ignored if
-# log_config_append is set. (string value)
-#syslog_log_facility = LOG_USER
-
-# Log output to standard error. This option is ignored if log_config_append is
-# set. (boolean value)
-#use_stderr = false
-
-# Format string to use for log messages with context. (string value)
-#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s
-
-# Format string to use for log messages when context is undefined. (string
-# value)
-#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s
-
-# Additional data to append to log message when logging level for the message
-# is DEBUG. (string value)
-#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d
-
-# Prefix each line of exception output with this format. (string value)
-#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s
-
-# Defines the format string for %(user_identity)s that is used in
-# logging_context_format_string. (string value)
-#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s
-
-# List of package logging levels in logger=LEVEL pairs. This option is ignored
-# if log_config_append is set. (list value)
-#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO
-
-# Enables or disables publication of error events. (boolean value)
-#publish_errors = false
-
-# The format for an instance that is passed with the log message. (string
-# value)
-#instance_format = "[instance: %(uuid)s] "
-
-# The format for an instance UUID that is passed with the log message. (string
-# value)
-#instance_uuid_format = "[instance: %(uuid)s] "
-
-# Interval, number of seconds, of log rate limiting. (integer value)
-#rate_limit_interval = 0
-
-# Maximum number of logged messages per rate_limit_interval. (integer value)
-#rate_limit_burst = 0
-
-# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
-# or empty string. Logs with level greater or equal to rate_limit_except_level
-# are not filtered. An empty string means that all levels are filtered. (string
-# value)
-#rate_limit_except_level = CRITICAL
-
-# Enables or disables fatal status of deprecations. (boolean value)
-#fatal_deprecations = false
-
-
-[aai]
-
-#
-# From conductor
-#
-
-# Interval with which to refresh the local cache, in minutes. (integer value)
-cache_refresh_interval = 1
-complex_cache_refresh_interval = 60
-
-# Data Store table prefix. (string value)
-#table_prefix = aai
-
-# Base URL for A&AI, up to and including the version. (string value)
-server_url = http://localhost:8081/aai/
-
-
-# The version of A&AI (string value)
-server_url_version = v11
-
-# SSL/TLS certificate file in pem format. This certificate must be registered
-# with the A&AI endpoint. (string value)
-certificate_file = /usr/local/bin/cert.cer
-
-# Private Certificate Key file in pem format. (string value)
-certificate_key_file = /usr/local/bin/cert.key
-
-# Certificate Authority Bundle file in pem format. Must contain the appropriate
-# trust chain for theCertificate file. (string value)
-# certificate_authority_bundle_file = ~/certs/ca-bundle.pem
-
-[api]
-
-#
-# From conductor
-#
-
-# Toggle Pecan Debug Middleware. (boolean value)
-#pecan_debug = false
-
-# Default maximum number of items returned by API request. (integer value)
-# Minimum value: 1
-#default_api_return_limit = 100
-
-
-[controller]
-
-#
-# From conductor
-#
-
-# Timeout for planning requests. Default value is 10. (integer value)
-# Minimum value: 1
-#timeout = 10
-
-# Maximum number of result sets to return. Default value is 1. (integer value)
-# Minimum value: 1
-#limit = 1
-
-# Number of workers for controller service. Default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-
-[inventory_provider]
-
-#
-# From conductor
-#
-
-# Extensions list to use (list value)
-# extensions = aai
-
-
-[messaging_server]
-
-#
-# From conductor
-#
-
-# Music keyspace for messages (string value)
-keyspace = conductor_rpc_saisree
-
-# Wait interval while checking for a message response. Default value is 1
-# second. (integer value)
-# Minimum value: 1
-#check_interval = 1
-
-# Overall message response timeout. Default value is 10 seconds. (integer
-# value)
-# Minimum value: 1
-timeout = 3600
-
-# Number of workers for messaging service. Default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Time between checking for new messages. Default value is 1. (integer value)
-# Minimum value: 1
-#polling_interval = 1
-
-# Log debug messages. Default value is False. (boolean value)
-#debug = false
-
-
-[music_api]
-
-#
-# From conductor
-#
-
-# Base URL for Music REST API without a trailing slash. (string value)
-server_url = http://localhost:8080/MUSIC/rest
-
-# DEPRECATED: List of hostnames (round-robin access) (list value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use server_url instead
-# hostnames = 135.197.226.85
-# 135.197.226.83, 135.197.226.85
-
-# DEPRECATED: Port (integer value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use server_url instead
-#port = <None>
-
-# DEPRECATED: Path (string value)
-# This option is deprecated for removal.
-# Its value may be silently ignored in the future.
-# Reason: Use server_url instead
-#path = <None>
-
-# Lock timeout (integer value)
-#lock_timeout = 10
-
-# Replication factor (integer value)
-#replication_factor = 1
-
-# debug = false
-
-[reservation]
-
-#
-# From conductor
-#
-
-# Number of workers for reservation service. Default value is 1. (integer
-# value)
-# Minimum value: 1
-#workers = 1
-
-# Number of times reservation/release should be attempted. (integer value)
-#reserve_retries = 3
-
-# Set to True when reservation will run in active-active mode. When set to
-# False, reservation will restart any orphaned reserving requests at startup.
-# (boolean value)
-#concurrent = false
-
-[sdnc]
-
-#
-# From conductor
-#
-
-# Interval with which to refresh the local cache, in minutes. (integer value)
-#cache_refresh_interval = 1440
-
-# Data Store table prefix. (string value)
-#table_prefix = sdnc
-
-# Base URL for SDN-C. (string value)
-server_url = https://localhost:8082/restconf/
-
-# Basic Authentication Username (string value)
-username = admin
-
-# Basic Authentication Password (string value)
-password = admin
-
-
-[service_controller]
-
-#
-# From conductor
-#
-
-# Extensions list to use (list value)
-extensions = sdnc
-
-[solver]
-
-#
-# From conductor
-#
-
-# Number of workers for solver service. Default value is 1. (integer value)
-# Minimum value: 1
-#workers = 1
-
-# Set to True when solver will run in active-active mode. When set to False,
-# solver will restart any orphaned solving requests at startup. (boolean value)
-#concurrent = false
-
diff --git a/test/csit/scripts/optf/has/has_script.sh b/test/csit/scripts/optf/has/has_script.sh
deleted file mode 100755
index 3da7e04c6..000000000
--- a/test/csit/scripts/optf/has/has_script.sh
+++ /dev/null
@@ -1,81 +0,0 @@
-#!/bin/bash
-#
-# Copyright 2016-2017 Huawei Technologies Co., Ltd.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-echo "### This is ${WORKSPACE}/test/csit/scripts/optf/has/has_script.sh"
-#
-# add here whatever commands is needed to prepare the optf/has CSIT testing
-#
-
-# assume the base is /opt
-DIR=/opt
-#cd /opt
-
-# the directory of the script
-#DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-echo ${DIR}
-cd ${DIR}
-
-# the temp directory used, within $DIR
-# omit the -p parameter to create a temporal directory in the default location
-WORK_DIR=`mktemp -d -p "$DIR"`
-echo ${WORK_DIR}
-
-cd ${WORK_DIR}
-
-# check if tmp dir was created
-if [[ ! "$WORK_DIR" || ! -d "$WORK_DIR" ]]; then
-  echo "Could not create temp dir"
-  exit 1
-fi
-
-
-git clone https://gerrit.onap.org/r/optf/has
-cd has
-cd conductor/docker
-
-#sed  -i -e "s%FROM python:2\.7%FROM python:2\.7\\nENV http_proxy http:\/\/one\.proxy\.att\.com:8080\\nENV https_proxy http:\/\/one\.proxy\.att\.com:8080%g" api/Dockerfile
-#sed  -i -e "s%FROM python:2\.7%FROM python:2\.7\\nENV http_proxy http:\/\/one\.proxy\.att\.com:8080\\nENV https_proxy http:\/\/one\.proxy\.att\.com:8080%g" controller/Dockerfile
-#sed  -i -e "s%FROM python:2\.7%FROM python:2\.7\\nENV http_proxy http:\/\/one\.proxy\.att\.com:8080\\nENV https_proxy http:\/\/one\.proxy\.att\.com:8080%g" data/Dockerfile
-#sed  -i -e "s%FROM python:2\.7%FROM python:2\.7\\nENV http_proxy http:\/\/one\.proxy\.att\.com:8080\\nENV https_proxy http:\/\/one\.proxy\.att\.com:8080%g" reservation/Dockerfile
-#sed  -i -e "s%FROM python:2\.7%FROM python:2\.7\\nENV http_proxy http:\/\/one\.proxy\.att\.com:8080\\nENV https_proxy http:\/\/one\.proxy\.att\.com:8080%g" solver/Dockerfile
-
-
-# ./build-dockers.sh
-docker build -t api api/
-docker build -t controller controller/
-docker build -t data data/
-docker build -t solver solver/
-docker build -t reservation reservation/
-
-
-# create directory for volume and copy configuration file
-mkdir -p /tmp/conductor/properties
-cp ${WORKSPACE}/test/csit/scripts/optf/has/has-properties/conductor.conf.onap /tmp/conductor/properties/conductor.conf
-cp ${WORKSPACE}/test/csit/scripts/optf/has/has-properties/cert.cer /tmp/conductor/properties/cert.cer
-cp ${WORKSPACE}/test/csit/scripts/optf/has/has-properties/cert.key /tmp/conductor/properties/cert.key
-
-
-
-# run docker containers
-#docker run -d --name cond-data -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf -v /tmp/conductor/properties/cert.key:/usr/local/bin/cert.key -v /tmp/conductor/properties/cert.cer:/usr/local/bin/cert.cer data
-#docker run -d --name cond-data -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf data
-docker run -d --name cond-cont -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf controller
-docker run -d --name cond-api -p 8091:8091  -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf api
-docker run -d --name cond-solv -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf solver
-docker run -d --name cond-resv -v /tmp/conductor/properties/conductor.conf:/usr/local/bin/conductor.conf reservation
-
-# wait a while before continuing
-sleep 30