initial integration tests for CLAMP

Commit the first test for CLAMP, UIs and TCA first

Change-Id: I902e7ea79210c114eaf03943a83ac71bbfbf012e
Signed-off-by: eh552t <eh552t@intl.att.com>
Issue-Id: CLAMP-33

6 files changed, 158 insertions, 0 deletions

diff --git a/test/csit/plans/clamp/TCA/setup.sh b/test/csit/plans/clamp/TCA/setup.sh
new file mode 100755
index 000000000..6398827bc
--- /dev/null
+++ b/test/csit/plans/clamp/TCA/setup.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+source ${WORKSPACE}/test/csit/scripts/clamp/script1.sh
+
+# Clone Clamp repo to get extra folder that has all needed to run docker with docker-compose to start DB and Clamp
+mkdir -p $WORKSPACE/archives/clamp-clone
+cd $WORKSPACE/archives/clamp-clone
+git clone --depth 1 http://gerrit.onap.org/r/clamp -b master
+cd clamp/extra/docker/clamp/
+
+# start Clamp and MariaDB containers with docker compose and configuration from clamp/extra/docker/clamp/docker-compose.yml
+docker-compose up -d
+
+# WAIT 5 minutes maximum and test every 5 seconds if Clamp up using HealthCheck API
+TIME_OUT=300
+INTERVAL=5
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo Clamp and its database well started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+fi
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v TEST:${TEST}"
+
diff --git a/test/csit/plans/clamp/TCA/teardown.sh b/test/csit/plans/clamp/TCA/teardown.sh
new file mode 100755
index 000000000..810c2e40d
--- /dev/null
+++ b/test/csit/plans/clamp/TCA/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh clamp_clamp_1
+kill-instance.sh clamp_db_1
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/plans/clamp/TCA/testplan.txt b/test/csit/plans/clamp/TCA/testplan.txt
new file mode 100644
index 000000000..c0f569673
--- /dev/null
+++ b/test/csit/plans/clamp/TCA/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+clamp/TCA
+
diff --git a/test/csit/plans/clamp/UIs/setup.sh b/test/csit/plans/clamp/UIs/setup.sh
new file mode 100755
index 000000000..6398827bc
--- /dev/null
+++ b/test/csit/plans/clamp/UIs/setup.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Modifications copyright (c) 2017 AT&T Intellectual Property
+#
+# Place the scripts in run order:
+source ${WORKSPACE}/test/csit/scripts/clamp/script1.sh
+
+# Clone Clamp repo to get extra folder that has all needed to run docker with docker-compose to start DB and Clamp
+mkdir -p $WORKSPACE/archives/clamp-clone
+cd $WORKSPACE/archives/clamp-clone
+git clone --depth 1 http://gerrit.onap.org/r/clamp -b master
+cd clamp/extra/docker/clamp/
+
+# start Clamp and MariaDB containers with docker compose and configuration from clamp/extra/docker/clamp/docker-compose.yml
+docker-compose up -d
+
+# WAIT 5 minutes maximum and test every 5 seconds if Clamp up using HealthCheck API
+TIME_OUT=300
+INTERVAL=5
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo Clamp and its database well started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+fi
+
+# Pass any variables required by Robot test suites in ROBOT_VARIABLES
+#ROBOT_VARIABLES="-v TEST:${TEST}"
+
diff --git a/test/csit/plans/clamp/UIs/teardown.sh b/test/csit/plans/clamp/UIs/teardown.sh
new file mode 100755
index 000000000..810c2e40d
--- /dev/null
+++ b/test/csit/plans/clamp/UIs/teardown.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+#
+# Copyright 2016-2017 Huawei Technologies Co., Ltd.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+kill-instance.sh clamp_clamp_1
+kill-instance.sh clamp_db_1
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/plans/clamp/UIs/testplan.txt b/test/csit/plans/clamp/UIs/testplan.txt
new file mode 100644
index 000000000..9ec5b9538
--- /dev/null
+++ b/test/csit/plans/clamp/UIs/testplan.txt
@@ -0,0 +1,4 @@
+# Test suites are relative paths under [integration.git]/test/csit/tests/.
+# Place the suites in run order.
+clamp/UIs
+