diff options
Diffstat (limited to 'bundleconfig-local/etc/sysprops')
| -rw-r--r-- | bundleconfig-local/etc/sysprops/sys-props.properties | 171 | ||||
| -rw-r--r-- | bundleconfig-local/etc/sysprops/template.sys-props.properties | 141 |
2 files changed, 312 insertions, 0 deletions
diff --git a/bundleconfig-local/etc/sysprops/sys-props.properties b/bundleconfig-local/etc/sysprops/sys-props.properties new file mode 100644 index 0000000..957a4dd --- /dev/null +++ b/bundleconfig-local/etc/sysprops/sys-props.properties @@ -0,0 +1,171 @@ +############################################################################### +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +############################################################################### +#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly. +#The sys-props.properties file is used for running locally. The template.sys-props.properties file will be used when deployed +#to a SOA/CSI Cloud node. For more information, please goto wiki link: +#http://wiki.web.att.com/pages/viewpage.action?pageId=368909155 + +#AJSC System Properties. The following properties are required for ALL AJSC services. If you are adding System Properties for your +#particular service, please add them AFTER all AJSC related System Properties. + +#For Cadi Authorization, use value="authentication-scheme-1 +CadiAuthN=authentication-scheme-1 + +#For Basic Authorization, use value="authentication-scheme-1 +authN=authentication-scheme-2 + +#Persistence used for AJSC meta-data storage. For most environments, "file" should be used. +ajscPersistence=file + +# If using hawtio for local development, these properties will allow for faster server startup and usage for local development +# See wiki for more info on hawtio: http://wiki.web.att.com/display/ajsc/Camel+Route+Debugging+with+AJSC+-+hawtio +hawtio.authenticationEnabled=false +hawtio.config.pullOnStartup=false + +#Removes the extraneous restlet console output +org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade + +#server.host property to be enabled for local DME2 related testing +#server.host=<Your network IP address> + +#Enable/disable SSL (values=true/false). This property also determines which protocol to use (https if true, http otherwise), to register services into GRM through DME2. +enableSSL=false + +#Enable/disable csi logging (values=true/false). This can be disabled during local development +csiEnable=false + +#Enable/disable CAET This can be disabled during local development +isCAETEnable=true + +#Enable/disable EJB Container +ENABLE_EJB=false + +#Enable/disable OSGI +isOSGIEnable=false + +#Configure JMS Queue (WMQ/TIBCO) +JMS_BROKER=WMQ + +#Generate/Skip api docs +isApiDoc=false + +#JMS properties needed for CSI Logging +JMS_TIBCO_PROVIDER_URL=tcp://q34csi2c6.vci.att.com:15223 +JMS_LOGGER_USER_NAME=spm2 +JMS_LOGGER_PASSWORD=<password> +JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue +JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02 + +#WMQ connectivity +JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28 +JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=1.0,bindingType=fusionBus,envContext=Q,Q30A=YES +JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory +JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q30A +JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q30A + +#CSI related variables for CSM framework +csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net + +#Enable/disable endpoint level logging (values=true/false). This can be disabled during local development +endpointLogging=false + +#Enable/disable trail logging and trail logging summary +enableTrailLogging=false +enableTrailLoggingSummary=false + +#SOA_CLOUD_ENV is used to register your service with dme2 and can be turned off for local development (values=true/false). +SOA_CLOUD_ENV=false + +#CONTINUE_ON_LISTENER_EXCEPTION will exit the application if there is a DME2 exception at the time of registration. +CONTINUE_ON_LISTENER_EXCEPTION=false + +#Jetty Container ThreadCount Configuration Variables +AJSC_JETTY_ThreadCount_MIN=1 +AJSC_JETTY_ThreadCount_MAX=200 +AJSC_JETTY_IDLETIME_MAX=3000 + +#Camel Context level default threadPool Profile configuration +CAMEL_POOL_SIZE=10 +CAMEL_MAX_POOL_SIZE=20 +CAMEL_KEEP_ALIVE_TIME=60 +CAMEL_MAX_QUEUE_SIZE=1000 + +#File Monitor configurations +ssf_filemonitor_polling_interval=5 +ssf_filemonitor_threadpool_size=10 + +#GRM/DME2 System Properties +AFT_DME2_CONN_IDLE_TIMEOUTMS=5000 +AJSC_ENV=SOACLOUD + +SOACLOUD_NAMESPACE=com.att.acsi.saat.dt.dmaap.dev +SOACLOUD_ENV_CONTEXT=TEST +SOACLOUD_PROTOCOL=http +SOACLOUD_ROUTE_OFFER=DEFAULT + +AFT_LATITUDE=23.4 +AFT_LONGITUDE=33.6 +AFT_ENVIRONMENT=AFTUAT + +#Restlet Component Default Properties +RESTLET_COMPONENT_CONTROLLER_DAEMON=true +RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=100 +RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=8192 +RESTLET_COMPONENT_MIN_THREADS=1 +RESTLET_COMPONENT_MAX_THREADS=10 +RESTLET_COMPONENT_LOW_THREADS=8 +RESTLET_COMPONENT_MAX_QUEUED=0 +RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=-1 +RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=-1 +RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=8192 +RESTLET_COMPONENT_PERSISTING_CONNECTIONS=true +RESTLET_COMPONENT_PIPELINING_CONNECTIONS=false +RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=60000 +RESTLET_COMPONENT_USE_FORWARDED_HEADER=false +RESTLET_COMPONENT_REUSE_ADDRESS=true + +#Externalized jar and properties file location. In CSI environments, there are a few libs that have been externalized to aid +#in CSTEM maintenance of the versions of these libs. The most important to the AJSC is the DME2 lib. Not only is this lib necessary +#for proper registration of your AJSC service on a node, but it is also necessary for running locally as well. Another framework +#used in CSI envs is the CSM framework. These 2 framework libs are shown as "provided" dependencies within the pom.xml. These +#dependencies will be copied into the target/commonLibs folder with the normal "mvn clean package" goal of the AJSC. They will +#then be added to the classpath via AJSC_EXTERNAL_LIB_FOLDERS system property. Any files (mainly property files) that need +#to be on the classpath should be added to the AJSC_EXTERNAL_PROPERTIES_FOLDERS system property. The default scenario when +#testing your AJSC service locally will utilize the target/commonLibs directory for DME2 and CSM related artifacts and 2 +#default csm properties files will be used for local testing with anything CSM knorelated. +#NOTE: we are using maven-replacer-plugin to replace "(doubleUnderscore)basedir(doubleUnderscore)" with ${basedir} within the +#target directory for running locally. Multiple folder locations can be separated by the pipe ("|") character. +#Please, NOTE: for running locally, we are setting this system property in the antBuild/build.xml "runLocal" target and in the +#"runAjsc" profile within the pom.xml. This is to most effectively use maven variables (${basedir}, most specifically. Therefore, +#when running locally, the following 2 properties should be set within the profile(s) themselves. +#Example: target/commonLibs|target/otherLibs +#AJSC_EXTERNAL_LIB_FOLDERS=__basedir__/target/commonLibs +#AJSC_EXTERNAL_PROPERTIES_FOLDERS=__basedir__/ajsc-shared-config/etc +#End of AJSC System Properties + +#Service System Properties. Please, place any Service related System Properties below. + +#msgrtr content length and error message +#100mb +maxcontentlength=10000 +msg_size_exceeds=Message size exceeds the default size. +forceAAF=false
\ No newline at end of file diff --git a/bundleconfig-local/etc/sysprops/template.sys-props.properties b/bundleconfig-local/etc/sysprops/template.sys-props.properties new file mode 100644 index 0000000..3ef53d3 --- /dev/null +++ b/bundleconfig-local/etc/sysprops/template.sys-props.properties @@ -0,0 +1,141 @@ +############################################################################### +# ============LICENSE_START======================================================= +# org.onap.dmaap +# ================================================================================ +# Copyright © 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +# +# ECOMP is a trademark and service mark of AT&T Intellectual Property. +# +############################################################################### +#This file is used for defining AJSC system properties for different configuration schemes and is necessary for the AJSC to run properly. +#The sys-props.properties file is used for running locally. The template.sys-props.properties file will be used when deployed +#to a SOA/CSI Cloud node. Upon SOA cloud install, all of the "double underscore" variables will be replaced by SWM node variables. +#For more information, please goto wiki link: http://wiki.web.att.com/pages/viewpage.action?pageId=368909155 + +#For Cadi Authorization, use value="authentication-scheme-1" +CadiAuthN=__AJSC_CADI_AUTHN__ + +#For Basic Authorization, use value="authentication-scheme-1" +authN=__AJSC_AUTH_SCHEME__ + +#Persistence used for AJSC meta-data storage. For most environments, "file" should be used. +ajscPersistence=__AJSC_PERSISTENCE__ + +#Configure externalized logback location +logback.configurationFile=__LOGBACK_CONFIG_FILE__ + +# If using hawtio for local development, these properties will allow for faster server startup and usage for local development. +# You may wish to deploy hawtio.war to dev/test environments to help debugging as well, but should not be used in PROD env. +# See wiki for more info on hawtio: http://wiki.web.att.com/display/ajsc/Camel+Route+Debugging+with+AJSC+-+hawtio +hawtio.authenticationEnabled=__HAWTIO_AUTHENTICATION_ENABLED__ +hawtio.config.pullOnStartup=__HAWTIO_CONFIG_PULLONSTARTUP__ + +#Removes the extraneous restlet console output +org.restlet.engine.loggerFacadeClass=org.restlet.ext.slf4j.Slf4jLoggerFacade + +#Enable/disable SSL (values=true/false). +enableSSL=__AJSC_ENABLE_SSL__ + +#Enable/disable csi logging (values=true/false). +csiEnable=__CSI_ENABLE__ + +#Enable/disable EJB Container +ENABLE_EJB=__ENABLE_EJB__ + +#Enable/disable OSGI +isOSGIEnable=__OSGI_ENABLE__ + +#Generate/Skip api docs +isApiDoc=__API_DOC__ + +#Configure JMS Queue (WMQ/TIBCO) +JMS_BROKER=WMQ + +#JMS properties needed for CSI Logging +JMS_TIBCO_PROVIDER_URL=tcp://q34csi2c6.vci.att.com:15223 +JMS_LOGGER_USER_NAME=spm2 +JMS_LOGGER_PASSWORD=<password> +JMS_LOGGER_AUDIT_QUEUE_BINDING=pub.m2e.audit.logger.queue +JMS_LOGGER_PERF_QUEUE_BINDING=log.csi.performance02 + +#WMQ connectivity +JMS_WMQ_PROVIDER_URL=aftdsc://AFTUAT/34.07/-84.28 +JMS_WMQ_CONNECTION_FACTORY_NAME=aftdsc://AFTUAT/?service=CSILOG,version=1.0,bindingType=fusionBus,envContext=Q,Q30A=YES +JMS_WMQ_INITIAL_CONNECTION_FACTORY_NAME=com.att.aft.jms.FusionCtxFactory +JMS_WMQ_AUDIT_DESTINATION_NAME=queue:///CSILOGQL.M2E.DASHBOARD01.NOT.Q30A +JMS_WMQ_PERF_DESTINATION_NAME=queue:///CSILOGQL.M2E.PERFORMANCE01.NOT.Q30A + +#CSI related variables for CSM framework +csm.hostname=d1a-m2e-q112m2e1.edc.cingular.net + +#Enable/disable endpoint level logging (values=true/false). +endpointLogging=__END_POINT_LEVEL_LOGGING__ + +#Enable/disable trail logging and trail logging summary (values=true/false). +enableTrailLogging=__ENABLE_TRAIL_LOGGING__ +enableTrailLoggingSummary=__ENABLE_TRAIL_LOGGING_SUMMARY__ + +#SOA_CLOUD_ENV is used to register your service with dme2 (values=true/false). +SOA_CLOUD_ENV=__SOA_CLOUD_ENV__ + +#Jetty Container ThreadCount Configuration Variables +AJSC_JETTY_ThreadCount_MAX=__AJSC_JETTY_ThreadCount_MAX__ +AJSC_JETTY_ThreadCount_MIN=__AJSC_JETTY_ThreadCount_MIN__ +AJSC_JETTY_IDLETIME_MAX=__AJSC_JETTY_IDLETIME_MAX__ +AJSC_SERVICE_NAMESPACE=__AJSC_SERVICE_NAMESPACE__ +AJSC_SERVICE_VERSION=__AJSC_SERVICE_VERSION__ + +#Camel Context level default threadPool Profile configuration +CAMEL_POOL_SIZE=__CAMEL_POOL_SIZE__ +CAMEL_MAX_POOL_SIZE=__CAMEL_MAX_POOL_SIZE__ +CAMEL_KEEP_ALIVE_TIME=__CAMEL_KEEP_ALIVE_TIME__ +CAMEL_MAX_QUEUE_SIZE=__CAMEL_MAX_QUEUE_SIZE__ + +#File Monitor configurations +ssf_filemonitor_polling_interval=__AJSC_SSF_FILE_MONITOR_POLLING_INTERVAL__ +ssf_filemonitor_threadpool_size=__AJSC_SSF_FILE_MONITOR_THREAD_POOL_SIZE__ + +#GRM/DME2 System Properties below +AFT_DME2_CONN_IDLE_TIMEOUTMS=__AFT_DME2_CONN_IDLE_TIMEOUTMS__ +AJSC_ENV=__AJSC_ENV__ +SOACLOUD_NAMESPACE=__SOA_CLOUD_NAMESPACE__ +SOACLOUD_ENV_CONTEXT=__SCLD_ENV__ +SOACLOUD_PROTOCOL=__SOACLOUD_PROTOCOL__ +SOACLOUD_ROUTE_OFFER=__AFT_SERVICE_ENV__ +sslport=__AJSC_SSL_PORT__ +server.port=__AJSC_SVC_PORT__ +AFT_LATITUDE=__LATITUDE__ +AFT_LONGITUDE=__LONGITUDE__ +AFT_ENVIRONMENT=__AFT_ENVIRONMENT__ + +#Restlet Component Properties +RESTLET_COMPONENT_CONTROLLER_DAEMON=__RESTLET_COMPONENT_CONTROLLER_DAEMON__ +RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS=__RESTLET_COMPONENT_CONTROLLER_SLEEP_TIME_MS__ +RESTLET_COMPONENT_INBOUND_BUFFER_SIZE=__RESTLET_COMPONENT_INBOUND_BUFFER_SIZE__ +RESTLET_COMPONENT_MIN_THREADS=__RESTLET_COMPONENT_MIN_THREADS__ +RESTLET_COMPONENT_MAX_THREADS=__RESTLET_COMPONENT_MAX_THREADS__ +RESTLET_COMPONENT_LOW_THREADS=__RESTLET_COMPONENT_LOW_THREADS__ +RESTLET_COMPONENT_MAX_QUEUED=__RESTLET_COMPONENT_MAX_QUEUED__ +RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST=__RESTLET_COMPONENT_MAX_CONNECTIONS_PER_HOST__ +RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS=__RESTLET_COMPONENT_MAX_TOTAL_CONNECTIONS__ +RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE=__RESTLET_COMPONENT_OUTBOUND_BUFFER_SIZE__ +RESTLET_COMPONENT_PERSISTING_CONNECTIONS=__RESTLET_COMPONENT_PERSISTING_CONNECTIONS__ +RESTLET_COMPONENT_PIPELINING_CONNECTIONS=__RESTLET_COMPONENT_PIPELINING_CONNECTIONS__ +RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS=__RESTLET_COMPONENT_THREAD_MAX_IDLE_TIME_MS__ +RESTLET_COMPONENT_USE_FORWARDED_HEADER=__RESTLET_COMPONENT_USE_FORWARDED_HEADER__ +RESTLET_COMPONENT_REUSE_ADDRESS=__RESTLET_COMPONENT_REUSE_ADDRESS__ + +AJSC_EXTERNAL_LIB_FOLDERS=__CSM_LIB__|__DME2_LIB__|__AJSC_EXTERNAL_LIB_FOLDERS__ +AJSC_EXTERNAL_PROPERTIES_FOLDERS=__AJSC_SHARED_CONFIG__|__AJSC_EXTERNAL_PROPERTIES_FOLDERS__
\ No newline at end of file |