summaryrefslogtreecommitdiffstats
path: root/pom.xml
diff options
context:
space:
mode:
Diffstat (limited to 'pom.xml')
-rw-r--r--pom.xml285
1 files changed, 141 insertions, 144 deletions
diff --git a/pom.xml b/pom.xml
index c8327cc..cd918b6 100644
--- a/pom.xml
+++ b/pom.xml
@@ -1,31 +1,21 @@
-<!--
- ============LICENSE_START=======================================================
- org.onap.dmaap
- ================================================================================
- Copyright © 2017 AT&T Intellectual Property. All rights reserved.
- ================================================================================
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
- ============LICENSE_END=========================================================
-
- ECOMP is a trademark and service mark of AT&T Intellectual Property.
-
- -->
+<!-- ============LICENSE_START=======================================================
+ org.onap.dmaap ================================================================================
+ Copyright © 2017 AT&T Intellectual Property. All rights reserved. ================================================================================
+ Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ use this file except in compliance with the License. You may obtain a copy
+ of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required
+ by applicable law or agreed to in writing, software distributed under the
+ License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
+ OF ANY KIND, either express or implied. See the License for the specific
+ language governing permissions and limitations under the License. ============LICENSE_END=========================================================
+ ECOMP is a trademark and service mark of AT&T Intellectual Property. -->
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>org.onap.dmaap.messagerouter.dmaapclient</groupId>
<artifactId>dmaapClient</artifactId>
<packaging>jar</packaging>
- <version>1.1.1-SNAPSHOT</version>
+ <version>1.1.2-SNAPSHOT</version>
<name>dmaap-messagerouter-dmaapclient</name>
<description>Client library for MR event routing API</description>
<url>https://github.com/att/dmaap-framework</url>
@@ -40,21 +30,23 @@
<maven.compiler.target>1.7</maven.compiler.target>
<maven.compiler.source>1.7</maven.compiler.source>
<jersey.version>2.22.1</jersey.version>
+ <version.jackson.core>2.6.7.1</version.jackson.core>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
-
- <!-- SONAR -->
- <jacoco.version>0.7.7.201606060606</jacoco.version>
- <sonar-jacoco-listeners.version>3.2</sonar-jacoco-listeners.version>
- <sonar.core.codeCoveragePlugin>jacoco</sonar.core.codeCoveragePlugin>
- <!-- Default Sonar configuration -->
- <sonar.jacoco.reportPath>target/code-coverage/jacoco-ut.exec</sonar.jacoco.reportPath>
- <sonar.jacoco.itReportPath>target/code-coverage/jacoco-it.exec</sonar.jacoco.itReportPath>
- <!-- Note: This list should match jacoco-maven-plugin's exclusion list below -->
- <sonar.exclusions>**/gen/**,**/generated-sources/**,**/yang-gen**,**/pax/**</sonar.exclusions>
- <sitePath>/content/sites/site/org/onap/dmaap/messagerouter/dmaapclient/${project.artifactId}/${project.version}</sitePath>
+
+ <!-- SONAR -->
+ <jacoco.version>0.7.7.201606060606</jacoco.version>
+ <sonar-jacoco-listeners.version>3.2</sonar-jacoco-listeners.version>
+ <sonar.core.codeCoveragePlugin>jacoco</sonar.core.codeCoveragePlugin>
+ <!-- Default Sonar configuration -->
+ <sonar.jacoco.reportPath>target/code-coverage/jacoco-ut.exec</sonar.jacoco.reportPath>
+ <sonar.jacoco.itReportPath>target/code-coverage/jacoco-it.exec</sonar.jacoco.itReportPath>
+ <!-- Note: This list should match jacoco-maven-plugin's exclusion list
+ below -->
+ <sonar.exclusions>**/gen/**,**/generated-sources/**,**/yang-gen**,**/pax/**</sonar.exclusions>
+ <sitePath>/content/sites/site/org/onap/dmaap/messagerouter/dmaapclient/${project.artifactId}/${project.version}</sitePath>
<nexusproxy>https://nexus.onap.org</nexusproxy>
</properties>
-
+
<distributionManagement>
<site>
<id>ecomp-site</id>
@@ -62,29 +54,44 @@
</site>
</distributionManagement>
- <licenses>
- <license>
- <name>Apache License Version 2.0</name>
- </license>
+ <licenses>
+ <license>
+ <name>Apache License Version 2.0</name>
+ </license>
</licenses>
<developers>
- <developer>
- <name>Rajashree</name>
- <email></email>
- <organization>ATT</organization>
- <organizationUrl>www.att.com</organizationUrl>
- </developer>
- <developer>
- <name>Ramkumar</name>
- <email></email>
- <organization>ATT</organization>
- <organizationUrl>www.att.com</organizationUrl>
- </developer>
- </developers>
+ <developer>
+ <name>Rajashree</name>
+ <email></email>
+ <organization>ATT</organization>
+ <organizationUrl>www.att.com</organizationUrl>
+ </developer>
+ <developer>
+ <name>Ramkumar</name>
+ <email></email>
+ <organization>ATT</organization>
+ <organizationUrl>www.att.com</organizationUrl>
+ </developer>
+ </developers>
<dependencies>
<dependency>
+ <groupId>com.fasterxml.jackson.core</groupId>
+ <artifactId>jackson-core</artifactId>
+ <version>2.8.6</version>
+ </dependency>
+ <dependency>
+ <groupId>com.fasterxml.jackson.core</groupId>
+ <artifactId>jackson-databind</artifactId>
+ <version>2.8.9</version>
+ </dependency>
+ <dependency>
+ <groupId>org.apache.httpcomponents</groupId>
+ <artifactId>httpclient-cache</artifactId>
+ <version>4.5.3</version>
+ </dependency>
+ <dependency>
<groupId>com.att.nsa</groupId>
<artifactId>saClientLibrary</artifactId>
<version>0.0.1</version>
@@ -99,7 +106,7 @@
<dependency>
<groupId>com.att.aft</groupId>
<artifactId>dme2</artifactId>
- <version>3.1.200</version>
+ <version>3.1.200-oss</version>
<exclusions>
<exclusion>
<groupId>com.sun.jersey</groupId>
@@ -154,12 +161,12 @@
<version>4.11</version>
<scope>test</scope>
</dependency>
-
+
<dependency>
- <groupId>com.github.tomakehurst</groupId>
- <artifactId>wiremock</artifactId>
- <version>2.5.0</version>
- <scope>test</scope>
+ <groupId>com.github.tomakehurst</groupId>
+ <artifactId>wiremock</artifactId>
+ <version>2.5.0</version>
+ <scope>test</scope>
</dependency>
<dependency>
<groupId>org.mockito</groupId>
@@ -167,7 +174,7 @@
<version>1.9.5</version>
<scope>test</scope>
</dependency>
-
+
</dependencies>
<build>
@@ -258,92 +265,82 @@
<target>1.7</target>
</configuration>
</plugin>
- <plugin>
- <groupId>org.jacoco</groupId>
- <artifactId>jacoco-maven-plugin</artifactId>
- <version>${jacoco.version}</version>
- <configuration>
- <!-- Note: This exclusion list should match <sonar.exclusions>
- property above -->
- <excludes>
- <exclude>**/gen/**</exclude>
- <exclude>**/generated-sources/**</exclude>
- <exclude>**/yang-gen/**</exclude>
- <exclude>**/pax/**</exclude>
- </excludes>
- </configuration>
- <executions>
- <!--
- Prepares the property pointing to the JaCoCo runtime agent which
- is passed as VM argument when Maven the Surefire plugin is executed.
- -->
- <execution>
- <id>pre-unit-test</id>
- <goals>
- <goal>prepare-agent</goal>
- </goals>
- <configuration>
- <!-- Sets the path to the file which contains the execution data. -->
- <destFile>${project.build.directory}/code-coverage/jacoco-ut.exec</destFile>
- <!--
- Sets the name of the property containing the settings
- for JaCoCo runtime agent.
- -->
- <propertyName>surefireArgLine</propertyName>
- </configuration>
- </execution>
- <!--
- Ensures that the code coverage report for unit tests is created after
- unit tests have been run.
- -->
- <execution>
- <id>post-unit-test</id>
- <phase>test</phase>
- <goals>
- <goal>report</goal>
- </goals>
- <configuration>
- <!-- Sets the path to the file which contains the execution data. -->
- <dataFile>${project.build.directory}/code-coverage/jacoco-ut.exec</dataFile>
- <!-- Sets the output directory for the code coverage report. -->
- <outputDirectory>${project.reporting.outputDirectory}/jacoco-ut</outputDirectory>
- </configuration>
- </execution>
- <execution>
- <id>pre-integration-test</id>
- <phase>pre-integration-test</phase>
- <goals>
- <goal>prepare-agent</goal>
- </goals>
- <configuration>
- <!-- Sets the path to the file which contains the execution data. -->
- <destFile>${project.build.directory}/code-coverage/jacoco-it.exec</destFile>
- <!--
- Sets the name of the property containing the settings
- for JaCoCo runtime agent.
- -->
- <propertyName>failsafeArgLine</propertyName>
- </configuration>
- </execution>
- <!--
- Ensures that the code coverage report for integration tests after
- integration tests have been run.
- -->
- <execution>
- <id>post-integration-test</id>
- <phase>post-integration-test</phase>
- <goals>
- <goal>report</goal>
- </goals>
- <configuration>
- <!-- Sets the path to the file which contains the execution data. -->
- <dataFile>${project.build.directory}/code-coverage/jacoco-it.exec</dataFile>
- <!-- Sets the output directory for the code coverage report. -->
- <outputDirectory>${project.reporting.outputDirectory}/jacoco-it</outputDirectory>
- </configuration>
- </execution>
- </executions>
- </plugin>
+ <plugin>
+ <groupId>org.jacoco</groupId>
+ <artifactId>jacoco-maven-plugin</artifactId>
+ <version>${jacoco.version}</version>
+ <configuration>
+ <!-- Note: This exclusion list should match <sonar.exclusions> property
+ above -->
+ <excludes>
+ <exclude>**/gen/**</exclude>
+ <exclude>**/generated-sources/**</exclude>
+ <exclude>**/yang-gen/**</exclude>
+ <exclude>**/pax/**</exclude>
+ </excludes>
+ </configuration>
+ <executions>
+ <!-- Prepares the property pointing to the JaCoCo runtime agent which
+ is passed as VM argument when Maven the Surefire plugin is executed. -->
+ <execution>
+ <id>pre-unit-test</id>
+ <goals>
+ <goal>prepare-agent</goal>
+ </goals>
+ <configuration>
+ <!-- Sets the path to the file which contains the execution data. -->
+ <destFile>${project.build.directory}/code-coverage/jacoco-ut.exec</destFile>
+ <!-- Sets the name of the property containing the settings for JaCoCo
+ runtime agent. -->
+ <propertyName>surefireArgLine</propertyName>
+ </configuration>
+ </execution>
+ <!-- Ensures that the code coverage report for unit tests is created
+ after unit tests have been run. -->
+ <execution>
+ <id>post-unit-test</id>
+ <phase>test</phase>
+ <goals>
+ <goal>report</goal>
+ </goals>
+ <configuration>
+ <!-- Sets the path to the file which contains the execution data. -->
+ <dataFile>${project.build.directory}/code-coverage/jacoco-ut.exec</dataFile>
+ <!-- Sets the output directory for the code coverage report. -->
+ <outputDirectory>${project.reporting.outputDirectory}/jacoco-ut</outputDirectory>
+ </configuration>
+ </execution>
+ <execution>
+ <id>pre-integration-test</id>
+ <phase>pre-integration-test</phase>
+ <goals>
+ <goal>prepare-agent</goal>
+ </goals>
+ <configuration>
+ <!-- Sets the path to the file which contains the execution data. -->
+ <destFile>${project.build.directory}/code-coverage/jacoco-it.exec</destFile>
+ <!-- Sets the name of the property containing the settings for JaCoCo
+ runtime agent. -->
+ <propertyName>failsafeArgLine</propertyName>
+ </configuration>
+ </execution>
+ <!-- Ensures that the code coverage report for integration tests after
+ integration tests have been run. -->
+ <execution>
+ <id>post-integration-test</id>
+ <phase>post-integration-test</phase>
+ <goals>
+ <goal>report</goal>
+ </goals>
+ <configuration>
+ <!-- Sets the path to the file which contains the execution data. -->
+ <dataFile>${project.build.directory}/code-coverage/jacoco-it.exec</dataFile>
+ <!-- Sets the output directory for the code coverage report. -->
+ <outputDirectory>${project.reporting.outputDirectory}/jacoco-it</outputDirectory>
+ </configuration>
+ </execution>
+ </executions>
+ </plugin>
</plugins>
</build>