Fix pom and remove build scripts

Making the following changes for the CICD integartion.
1. Remove the mvn-phase* scripts.  These scripts are hooks for
building non-Java project.  This appeasr to be a Java project.
Native mvn methods should be enough.
2. Changed artifact ID in pom.  LF CICD syste requires group ID
and artifact ID matches with the repo path.  Otherwise deploying
to Nexus will be blocked.
3. Removed duplicated (older version) Jetty servelet dependency
calling in pom.

Issue-ID: DCAEGEN2-206
Change-Id: I614b9b11419ae091a452ef23fda6a318347ae8e9
Signed-off-by: Lusheng Ji <lji@research.att.com>

1 files changed, 0 insertions, 292 deletions

diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh
deleted file mode 100755
index b7c12a92..00000000
--- a/mvn-phase-lib.sh
+++ /dev/null
@@ -1,292 +0,0 @@
-#!/usr/bin/env bash
-
-# ================================================================================
-# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-
-
-clean_templated_files()
-{
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    rm -f "$F2"
-  done
-}
-clean_tox_files()
-{
-  TOX_FILES=$(find . -name ".tox")
-  TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')"
-  for F in $TOX_FILES; do
-    rm -rf "$F"
-  done
-}
-
-expand_templates()
-{
-  # set up env variables, get ready for template resolution
-  # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints"
-
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases"
-  export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots"
-
-  export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi"
-
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY"
-  export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots"
-
-
-  TEMPLATE_FILES=$(find . -name "*-template")
-  for F in $TEMPLATE_FILES; do
-    F2=$(echo "$F" | sed 's/-template$//')
-    cp "$F" "$F2"
-    MOD=$(stat --format '%a' "$F")
-    chmod "$MOD" "$F2"
-  done
-
-
-  TEMPLATES=$(env |grep ONAPTEMPLATE)
-  if [ -z "$TEMPLATES" ]; then
-    return 0
-  fi
-
-  echo "====> Resolving the following temaplate from environment variables "
-  echo "[$TEMPLATES]"
-  SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev)
-  for TEMPLATE in $TEMPLATES; do
-    KEY=$(echo "$TEMPLATE" | cut -f1 -d'=')
-    VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=')
-    VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g')
-    set +e
-    FILES=$(grep -rl "$KEY")
-    set -e
-
-    if [ -z "$FILES" ]; then
-      continue
-    fi
-
-    # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM
-    for F in $FILES; do
-      if [[ $F == *"$SELFFILE" ]]; then
-        continue
-      fi
-      if [[ "$F" == *-template ]]; then
-        continue
-      fi
-
-      echo "======> Resolving template $KEY to value $VALUE for file $F"
-      sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F"
-      #cat "$F"
-    done
-
-    #if [ ! -z "$FILES" ]; then
-    #   echo "====> Resolving template $VALUE to value $VALUE"
-    #   #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\""
-    #   grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g'
-    #   #echo $CMD
-    #   #eval $CMD
-    #fi
-  done
-  echo "====> Done template reolving"
-}
-
-
-run_tox_test()
-{
-  set -x
-  CURDIR=$(pwd)
-  TOXINIS=$(find . -name "tox.ini")
-  for TOXINI in "${TOXINIS[@]}"; do
-    DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev)
-    cd "${CURDIR}/${DIR}"
-    rm -rf ./venv-tox ./.tox
-    virtualenv ./venv-tox
-    source ./venv-tox/bin/activate
-    pip install --upgrade pip
-    pip install --upgrade tox argparse
-    pip freeze
-    tox
-    deactivate
-    rm -rf ./venv-tox ./.tox
-  done
-}
-
-build_wagons()
-{
-  rm -rf ./*.wgn venv-pkg
-
-  SETUPFILES=$(find . -name "setup.py")
-  for SETUPFILE in $SETUPFILES; do
-    PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev)
-    PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g')
-    PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g')
-
-    echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION"
-
-    virtualenv ./venv-pkg
-    source ./venv-pkg/bin/activate
-    pip install --upgrade pip
-    pip install wagon
-    wagon create --format tar.gz "$PLUGIN_DIR"
-    deactivate
-    rm -rf venv-pkg
-
-    PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn )
-    echo Built package: "${PKG_FILE_NAMES[@]}"
-  done
-}
-
-
-upload_raw_file()
-{
-  # Extract the username and password to the nexus repo from the settings file
-  USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE")
-  PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE")
-  NETRC=$(mktemp)
-  echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC"
-
-  REPO="$MVN_RAWREPO_BASEURL_UPLOAD"
-
-  OUTPUT_FILE=$1
-  EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev)
-  if [ "$EXT" == 'yaml' ]; then
-    OUTPUT_FILE_TYPE='text/x-yaml'
-  elif [ "$EXT" == 'sh' ]; then
-    OUTPUT_FILE_TYPE='text/x-shellscript'
-  elif [ "$EXT" == 'gz' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  elif [ "$EXT" == 'wgn' ]; then
-    OUTPUT_FILE_TYPE='application/gzip'
-  else
-    OUTPUT_FILE_TYPE='application/octet-stream'
-  fi
-
-
-  if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then
-    SEND_TO="${REPO}/${FQDN}/snapshots"
-  elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then
-    SEND_TO="${REPO}/${FQDN}/releases"
-  else
-    echo "Unreconfnized deployment type, quit"
-    exit
-  fi
-  if [ ! -z "$MVN_PROJECT_MODULEID" ]; then
-    SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID"
-  fi
-
-  echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}"
-  curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}"
-}
-
-
-
-upload_wagons_and_type_yamls()
-{
-  WAGONS=$(ls -1 ./*.wgn)
-  for WAGON in $WAGONS ; do
-    WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-')
-    WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-')
-    WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1)
-
-    upload_raw_file "$WAGON"
-    upload_raw_file "$WAGON_TYPEFILE"
-  done
-}
-
-upload_files_of_extension()
-{
-  FILES=$(ls -1 ./*."$1")
-  for F in $FILES ; do
-    upload_raw_file "$F"
-  done
-}
-
-
-
-build_and_push_docker()
-{
-  IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}"
-  IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g')
-
-  # use the major and minor version of the MVN artifact version as docker image version
-  VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}"
-  VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.')
-
-  LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}"
-  BUILD_PATH="${WORKSPACE}"
-  # build a docker image
-  docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}"
-
-  REPO=""
-  if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-     # there seems to be no staging docker registry?  set to use SNAPSHOT also
-     #REPO=$MVN_DOCKERREGISTRY_RELEASE
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  else
-     echo "Fail to determine DEPLOYMENT_TYPE"
-     REPO=$MVN_DOCKERREGISTRY_DAILY
-  fi
-  echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO"
-
-  if [ ! -z "$REPO" ]; then
-    USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE")
-    PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE")
-    if [ -z "$USER" ]; then
-      echo "Error: no user provided"
-    fi
-    if [ -z "$PASS" ]; then
-      echo "Error: no password provided"
-    fi
-    [ -z "$PASS" ] && PASS_PROVIDED="<empty>" || PASS_PROVIDED="<password>"
-    echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED"
-    docker login "$REPO" -u "$USER" -p "$PASS"
-
-    if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then
-      REPO="$REPO/snapshots"
-    elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then
-      # there seems to be no staging docker registry?  set to use SNAPSHOT also
-      #REPO=$MVN_DOCKERREGISTRY_RELEASE
-      REPO="$REPO"
-    else
-      echo "Fail to determine DEPLOYMENT_TYPE"
-      REPO="$REPO/unknown"
-    fi
-
-    OLDTAG="${LFQI}"
-    PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest"
-    for NEWTAG in ${PUSHTAGS}
-    do
-      echo "tagging ${OLDTAG} to ${NEWTAG}"
-      docker tag "${OLDTAG}" "${NEWTAG}"
-      echo "pushing ${NEWTAG}"
-      docker push "${NEWTAG}"
-      OLDTAG="${NEWTAG}"
-    done
-  fi
-}
\ No newline at end of file