Fix xpath building for data nodes addressing YANG augmentation

Issue-ID: CPS-316
Change-Id: I8aa0960c2a6af2b8fe5bc2fb90efe36baee7a881
Signed-off-by: Ruslan Kashapov <ruslan.kashapov@pantheon.tech>

2 files changed, 0 insertions, 937 deletions

diff --git a/cps-service/src/test/resources/e2e/basic/ietf-inet-types.yang b/cps-service/src/test/resources/e2e/basic/ietf-inet-types.yang
deleted file mode 100755
index 2f14270de..000000000
--- a/cps-service/src/test/resources/e2e/basic/ietf-inet-types.yang
+++ /dev/null
@@ -1,457 +0,0 @@
-module ietf-inet-types {
-
-  namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
-  prefix "inet";
-
-  organization
-   "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
-  contact
-   "WG Web:   <http://tools.ietf.org/wg/netmod/>
-    WG List:  <mailto:netmod@ietf.org>
-
-    WG Chair: David Kessens
-              <mailto:david.kessens@nsn.com>
-
-    WG Chair: Juergen Schoenwaelder
-              <mailto:j.schoenwaelder@jacobs-university.de>
-
-    Editor:   Juergen Schoenwaelder
-              <mailto:j.schoenwaelder@jacobs-university.de>";
-
-  description
-   "This module contains a collection of generally useful derived
-    YANG data types for Internet addresses and related things.
-
-    Copyright (c) 2013 IETF Trust and the persons identified as
-    authors of the code.  All rights reserved.
-
-    Redistribution and use in source and binary forms, with or
-    without modification, is permitted pursuant to, and subject
-    to the license terms contained in, the Simplified BSD License
-    set forth in Section 4.c of the IETF Trust's Legal Provisions
-    Relating to IETF Documents
-    (http://trustee.ietf.org/license-info).
-
-    This version of this YANG module is part of RFC 6991; see
-    the RFC itself for full legal notices.";
-
-  revision 2013-07-15 {
-    description
-     "This revision adds the following new data types:
-      - ip-address-no-zone
-      - ipv4-address-no-zone
-      - ipv6-address-no-zone";
-    reference
-     "RFC 6991: Common YANG Data Types";
-  }
-
-  revision 2010-09-24 {
-    description
-     "Initial revision.";
-    reference
-     "RFC 6021: Common YANG Data Types";
-  }
-
-  /*** collection of types related to protocol fields ***/
-
-  typedef ip-version {
-    type enumeration {
-      enum unknown {
-        value "0";
-        description
-         "An unknown or unspecified version of the Internet
-          protocol.";
-      }
-      enum ipv4 {
-        value "1";
-        description
-         "The IPv4 protocol as defined in RFC 791.";
-      }
-      enum ipv6 {
-        value "2";
-        description
-         "The IPv6 protocol as defined in RFC 2460.";
-      }
-    }
-    description
-     "This value represents the version of the IP protocol.
-
-      In the value set and its semantics, this type is equivalent
-      to the InetVersion textual convention of the SMIv2.";
-    reference
-     "RFC  791: Internet Protocol
-      RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
-      RFC 4001: Textual Conventions for Internet Network Addresses";
-  }
-
-  typedef dscp {
-    type uint8 {
-      range "0..63";
-    }
-    description
-     "The dscp type represents a Differentiated Services Code Point
-      that may be used for marking packets in a traffic stream.
-      In the value set and its semantics, this type is equivalent
-      to the Dscp textual convention of the SMIv2.";
-    reference
-     "RFC 3289: Management Information Base for the Differentiated
-                Services Architecture
-      RFC 2474: Definition of the Differentiated Services Field
-                (DS Field) in the IPv4 and IPv6 Headers
-      RFC 2780: IANA Allocation Guidelines For Values In
-                the Internet Protocol and Related Headers";
-  }
-
-  typedef ipv6-flow-label {
-    type uint32 {
-      range "0..1048575";
-    }
-    description
-     "The ipv6-flow-label type represents the flow identifier or Flow
-      Label in an IPv6 packet header that may be used to
-      discriminate traffic flows.
-
-      In the value set and its semantics, this type is equivalent
-      to the IPv6FlowLabel textual convention of the SMIv2.";
-    reference
-     "RFC 3595: Textual Conventions for IPv6 Flow Label
-      RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
-  }
-
-  typedef port-number {
-    type uint16 {
-      range "0..65535";
-    }
-    description
-     "The port-number type represents a 16-bit port number of an
-      Internet transport-layer protocol such as UDP, TCP, DCCP, or
-      SCTP.  Port numbers are assigned by IANA.  A current list of
-      all assignments is available from <http://www.iana.org/>.
-
-      Note that the port number value zero is reserved by IANA.  In
-      situations where the value zero does not make sense, it can
-      be excluded by subtyping the port-number type.
-      In the value set and its semantics, this type is equivalent
-      to the InetPortNumber textual convention of the SMIv2.";
-    reference
-     "RFC  768: User Datagram Protocol
-      RFC  793: Transmission Control Protocol
-      RFC 4960: Stream Control Transmission Protocol
-      RFC 4340: Datagram Congestion Control Protocol (DCCP)
-      RFC 4001: Textual Conventions for Internet Network Addresses";
-  }
-
-  /*** collection of types related to autonomous systems ***/
-
-  typedef as-number {
-    type uint32;
-    description
-     "The as-number type represents autonomous system numbers
-      which identify an Autonomous System (AS).  An AS is a set
-      of routers under a single technical administration, using
-      an interior gateway protocol and common metrics to route
-      packets within the AS, and using an exterior gateway
-      protocol to route packets to other ASes.  IANA maintains
-      the AS number space and has delegated large parts to the
-      regional registries.
-
-      Autonomous system numbers were originally limited to 16
-      bits.  BGP extensions have enlarged the autonomous system
-      number space to 32 bits.  This type therefore uses an uint32
-      base type without a range restriction in order to support
-      a larger autonomous system number space.
-
-      In the value set and its semantics, this type is equivalent
-      to the InetAutonomousSystemNumber textual convention of
-      the SMIv2.";
-    reference
-     "RFC 1930: Guidelines for creation, selection, and registration
-                of an Autonomous System (AS)
-      RFC 4271: A Border Gateway Protocol 4 (BGP-4)
-      RFC 4001: Textual Conventions for Internet Network Addresses
-      RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
-                Number Space";
-  }
-
-  /*** collection of types related to IP addresses and hostnames ***/
-
-  typedef ip-address {
-    type union {
-      type inet:ipv4-address;
-      type inet:ipv6-address;
-    }
-    description
-     "The ip-address type represents an IP address and is IP
-      version neutral.  The format of the textual representation
-      implies the IP version.  This type supports scoped addresses
-      by allowing zone identifiers in the address format.";
-    reference
-     "RFC 4007: IPv6 Scoped Address Architecture";
-  }
-
-  typedef ipv4-address {
-    type string {
-      pattern
-        '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
-      +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
-      + '(%[\p{N}\p{L}]+)?';
-    }
-    description
-      "The ipv4-address type represents an IPv4 address in
-       dotted-quad notation.  The IPv4 address may include a zone
-       index, separated by a % sign.
-
-       The zone index is used to disambiguate identical address
-       values.  For link-local addresses, the zone index will
-       typically be the interface index number or the name of an
-       interface.  If the zone index is not present, the default
-       zone of the device will be used.
-
-       The canonical format for the zone index is the numerical
-       format";
-  }
-
-  typedef ipv6-address {
-    type string {
-      pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
-            + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
-            + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
-            + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
-            + '(%[\p{N}\p{L}]+)?';
-      pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
-            + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
-            + '(%.+)?';
-    }
-    description
-     "The ipv6-address type represents an IPv6 address in full,
-      mixed, shortened, and shortened-mixed notation.  The IPv6
-      address may include a zone index, separated by a % sign.
-
-      The zone index is used to disambiguate identical address
-      values.  For link-local addresses, the zone index will
-      typically be the interface index number or the name of an
-      interface.  If the zone index is not present, the default
-      zone of the device will be used.
-
-      The canonical format of IPv6 addresses uses the textual
-      representation defined in Section 4 of RFC 5952.  The
-      canonical format for the zone index is the numerical
-      format as described in Section 11.2 of RFC 4007.";
-    reference
-     "RFC 4291: IP Version 6 Addressing Architecture
-      RFC 4007: IPv6 Scoped Address Architecture
-      RFC 5952: A Recommendation for IPv6 Address Text
-                Representation";
-  }
-
-  typedef ip-address-no-zone {
-    type union {
-      type inet:ipv4-address-no-zone;
-      type inet:ipv6-address-no-zone;
-    }
-    description
-     "The ip-address-no-zone type represents an IP address and is
-      IP version neutral.  The format of the textual representation
-      implies the IP version.  This type does not support scoped
-      addresses since it does not allow zone identifiers in the
-      address format.";
-    reference
-     "RFC 4007: IPv6 Scoped Address Architecture";
-  }
-
-  typedef ipv4-address-no-zone {
-    type inet:ipv4-address {
-      pattern '[0-9\.]*';
-    }
-    description
-      "An IPv4 address without a zone index.  This type, derived from
-       ipv4-address, may be used in situations where the zone is
-       known from the context and hence no zone index is needed.";
-  }
-
-  typedef ipv6-address-no-zone {
-    type inet:ipv6-address {
-      pattern '[0-9a-fA-F:\.]*';
-    }
-    description
-      "An IPv6 address without a zone index.  This type, derived from
-       ipv6-address, may be used in situations where the zone is
-       known from the context and hence no zone index is needed.";
-    reference
-     "RFC 4291: IP Version 6 Addressing Architecture
-      RFC 4007: IPv6 Scoped Address Architecture
-      RFC 5952: A Recommendation for IPv6 Address Text
-                Representation";
-  }
-
-  typedef ip-prefix {
-    type union {
-      type inet:ipv4-prefix;
-      type inet:ipv6-prefix;
-    }
-    description
-     "The ip-prefix type represents an IP prefix and is IP
-      version neutral.  The format of the textual representations
-      implies the IP version.";
-  }
-
-  typedef ipv4-prefix {
-    type string {
-      pattern
-         '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
-       +  '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
-       + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
-    }
-    description
-     "The ipv4-prefix type represents an IPv4 address prefix.
-      The prefix length is given by the number following the
-      slash character and must be less than or equal to 32.
-
-      A prefix length value of n corresponds to an IP address
-      mask that has n contiguous 1-bits from the most
-      significant bit (MSB) and all other bits set to 0.
-
-      The canonical format of an IPv4 prefix has all bits of
-      the IPv4 address set to zero that are not part of the
-      IPv4 prefix.";
-  }
-
-  typedef ipv6-prefix {
-    type string {
-      pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
-            + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
-            + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
-            + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
-            + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
-      pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
-            + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
-            + '(/.+)';
-    }
-    description
-     "The ipv6-prefix type represents an IPv6 address prefix.
-      The prefix length is given by the number following the
-      slash character and must be less than or equal to 128.
-
-      A prefix length value of n corresponds to an IP address
-      mask that has n contiguous 1-bits from the most
-      significant bit (MSB) and all other bits set to 0.
-
-      The IPv6 address should have all bits that do not belong
-      to the prefix set to zero.
-
-      The canonical format of an IPv6 prefix has all bits of
-      the IPv6 address set to zero that are not part of the
-      IPv6 prefix.  Furthermore, the IPv6 address is represented
-      as defined in Section 4 of RFC 5952.";
-    reference
-     "RFC 5952: A Recommendation for IPv6 Address Text
-                Representation";
-  }
-
-  /*** collection of domain name and URI types ***/
-
-  typedef domain-name {
-    type string {
-      length "1..253";
-      pattern
-        '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
-      + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
-      + '|\.';
-    }
-    description
-     "The domain-name type represents a DNS domain name.  The
-      name SHOULD be fully qualified whenever possible.
-
-      Internet domain names are only loosely specified.  Section
-      3.5 of RFC 1034 recommends a syntax (modified in Section
-      2.1 of RFC 1123).  The pattern above is intended to allow
-      for current practice in domain name use, and some possible
-      future expansion.  It is designed to hold various types of
-      domain names, including names used for A or AAAA records
-      (host names) and other records, such as SRV records.  Note
-      that Internet host names have a stricter syntax (described
-      in RFC 952) than the DNS recommendations in RFCs 1034 and
-      1123, and that systems that want to store host names in
-      schema nodes using the domain-name type are recommended to
-      adhere to this stricter standard to ensure interoperability.
-
-      The encoding of DNS names in the DNS protocol is limited
-      to 255 characters.  Since the encoding consists of labels
-      prefixed by a length bytes and there is a trailing NULL
-      byte, only 253 characters can appear in the textual dotted
-      notation.
-
-      The description clause of schema nodes using the domain-name
-      type MUST describe when and how these names are resolved to
-      IP addresses.  Note that the resolution of a domain-name value
-      may require to query multiple DNS records (e.g., A for IPv4
-      and AAAA for IPv6).  The order of the resolution process and
-      which DNS record takes precedence can either be defined
-      explicitly or may depend on the configuration of the
-      resolver.
-
-      Domain-name values use the US-ASCII encoding.  Their canonical
-      format uses lowercase US-ASCII characters.  Internationalized
-      domain names MUST be A-labels as per RFC 5890.";
-    reference
-     "RFC  952: DoD Internet Host Table Specification
-      RFC 1034: Domain Names - Concepts and Facilities
-      RFC 1123: Requirements for Internet Hosts -- Application
-                and Support
-      RFC 2782: A DNS RR for specifying the location of services
-                (DNS SRV)
-      RFC 5890: Internationalized Domain Names in Applications
-                (IDNA): Definitions and Document Framework";
-  }
-
-  typedef host {
-    type union {
-      type inet:ip-address;
-      type inet:domain-name;
-    }
-    description
-     "The host type represents either an IP address or a DNS
-      domain name.";
-  }
-
-  typedef uri {
-    type string;
-    description
-     "The uri type represents a Uniform Resource Identifier
-      (URI) as defined by STD 66.
-
-      Objects using the uri type MUST be in US-ASCII encoding,
-      and MUST be normalized as described by RFC 3986 Sections
-      6.2.1, 6.2.2.1, and 6.2.2.2.  All unnecessary
-      percent-encoding is removed, and all case-insensitive
-      characters are set to lowercase except for hexadecimal
-      digits, which are normalized to uppercase as described in
-      Section 6.2.2.1.
-
-      The purpose of this normalization is to help provide
-      unique URIs.  Note that this normalization is not
-      sufficient to provide uniqueness.  Two URIs that are
-      textually distinct after this normalization may still be
-      equivalent.
-
-      Objects using the uri type may restrict the schemes that
-      they permit.  For example, 'data:' and 'urn:' schemes
-      might not be appropriate.
-
-      A zero-length URI is not a valid URI.  This can be used to
-      express 'URI absent' where required.
-
-      In the value set and its semantics, this type is equivalent
-      to the Uri SMIv2 textual convention defined in RFC 5017.";
-    reference
-     "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
-      RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
-                Group: Uniform Resource Identifiers (URIs), URLs,
-                and Uniform Resource Names (URNs): Clarifications
-                and Recommendations
-      RFC 5017: MIB Textual Conventions for Uniform Resource
-                Identifiers (URIs)";
-  }
-
-}
diff --git a/cps-service/src/test/resources/e2e/basic/ietf-yang-types.yang b/cps-service/src/test/resources/e2e/basic/ietf-yang-types.yang
deleted file mode 100755
index 371a091d1..000000000
--- a/cps-service/src/test/resources/e2e/basic/ietf-yang-types.yang
+++ /dev/null
@@ -1,480 +0,0 @@
-module ietf-yang-types {
-
-  namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
-  prefix "yang";
-
-  organization
-   "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
-  contact
-   "WG Web:   <http://tools.ietf.org/wg/netmod/>
-    WG List:  <mailto:netmod@ietf.org>
-
-    WG Chair: David Kessens
-              <mailto:david.kessens@nsn.com>
-
-    WG Chair: Juergen Schoenwaelder
-              <mailto:j.schoenwaelder@jacobs-university.de>
-
-    Editor:   Juergen Schoenwaelder
-              <mailto:j.schoenwaelder@jacobs-university.de>";
-
-  description
-   "This module contains a collection of generally useful derived
-    YANG data types.
-
-    Copyright (c) 2013 IETF Trust and the persons identified as
-    authors of the code.  All rights reserved.
-
-    Redistribution and use in source and binary forms, with or
-    without modification, is permitted pursuant to, and subject
-    to the license terms contained in, the Simplified BSD License
-    set forth in Section 4.c of the IETF Trust's Legal Provisions
-    Relating to IETF Documents
-    (http://trustee.ietf.org/license-info).
-
-    This version of this YANG module is part of RFC 6991; see
-    the RFC itself for full legal notices.";
-
-  revision 2013-07-15 {
-    description
-     "This revision adds the following new data types:
-      - yang-identifier
-      - hex-string
-      - uuid
-      - dotted-quad";
-    reference
-     "RFC 6991: Common YANG Data Types";
-  }
-
-  revision 2010-09-24 {
-    description
-     "Initial revision.";
-    reference
-     "RFC 6021: Common YANG Data Types";
-  }
-
-  /*** collection of counter and gauge types ***/
-
-  typedef counter32 {
-    type uint32;
-    description
-     "The counter32 type represents a non-negative integer
-      that monotonically increases until it reaches a
-      maximum value of 2^32-1 (4294967295 decimal), when it
-      wraps around and starts increasing again from zero.
-
-      Counters have no defined 'initial' value, and thus, a
-      single value of a counter has (in general) no information
-      content.  Discontinuities in the monotonically increasing
-      value normally occur at re-initialization of the
-      management system, and at other times as specified in the
-      description of a schema node using this type.  If such
-      other times can occur, for example, the creation of
-      a schema node of type counter32 at times other than
-      re-initialization, then a corresponding schema node
-      should be defined, with an appropriate type, to indicate
-      the last discontinuity.
-
-      The counter32 type should not be used for configuration
-      schema nodes.  A default statement SHOULD NOT be used in
-      combination with the type counter32.
-
-      In the value set and its semantics, this type is equivalent
-      to the Counter32 type of the SMIv2.";
-    reference
-     "RFC 2578: Structure of Management Information Version 2
-                (SMIv2)";
-  }
-
-  typedef zero-based-counter32 {
-    type yang:counter32;
-    default "0";
-    description
-     "The zero-based-counter32 type represents a counter32
-      that has the defined 'initial' value zero.
-
-      A schema node of this type will be set to zero (0) on creation
-      and will thereafter increase monotonically until it reaches
-      a maximum value of 2^32-1 (4294967295 decimal), when it
-      wraps around and starts increasing again from zero.
-
-      Provided that an application discovers a new schema node
-      of this type within the minimum time to wrap, it can use the
-      'initial' value as a delta.  It is important for a management
-      station to be aware of this minimum time and the actual time
-      between polls, and to discard data if the actual time is too
-      long or there is no defined minimum time.
-
-      In the value set and its semantics, this type is equivalent
-      to the ZeroBasedCounter32 textual convention of the SMIv2.";
-    reference
-      "RFC 4502: Remote Network Monitoring Management Information
-                 Base Version 2";
-  }
-
-  typedef counter64 {
-    type uint64;
-    description
-     "The counter64 type represents a non-negative integer
-      that monotonically increases until it reaches a
-      maximum value of 2^64-1 (18446744073709551615 decimal),
-      when it wraps around and starts increasing again from zero.
-
-      Counters have no defined 'initial' value, and thus, a
-      single value of a counter has (in general) no information
-      content.  Discontinuities in the monotonically increasing
-      value normally occur at re-initialization of the
-      management system, and at other times as specified in the
-      description of a schema node using this type.  If such
-      other times can occur, for example, the creation of
-      a schema node of type counter64 at times other than
-      re-initialization, then a corresponding schema node
-      should be defined, with an appropriate type, to indicate
-      the last discontinuity.
-
-      The counter64 type should not be used for configuration
-      schema nodes.  A default statement SHOULD NOT be used in
-      combination with the type counter64.
-
-      In the value set and its semantics, this type is equivalent
-      to the Counter64 type of the SMIv2.";
-    reference
-     "RFC 2578: Structure of Management Information Version 2
-                (SMIv2)";
-  }
-
-  typedef zero-based-counter64 {
-    type yang:counter64;
-    default "0";
-    description
-     "The zero-based-counter64 type represents a counter64 that
-      has the defined 'initial' value zero.
-
-
-
-
-      A schema node of this type will be set to zero (0) on creation
-      and will thereafter increase monotonically until it reaches
-      a maximum value of 2^64-1 (18446744073709551615 decimal),
-      when it wraps around and starts increasing again from zero.
-
-      Provided that an application discovers a new schema node
-      of this type within the minimum time to wrap, it can use the
-      'initial' value as a delta.  It is important for a management
-      station to be aware of this minimum time and the actual time
-      between polls, and to discard data if the actual time is too
-      long or there is no defined minimum time.
-
-      In the value set and its semantics, this type is equivalent
-      to the ZeroBasedCounter64 textual convention of the SMIv2.";
-    reference
-     "RFC 2856: Textual Conventions for Additional High Capacity
-                Data Types";
-  }
-
-  typedef gauge32 {
-    type uint32;
-    description
-     "The gauge32 type represents a non-negative integer, which
-      may increase or decrease, but shall never exceed a maximum
-      value, nor fall below a minimum value.  The maximum value
-      cannot be greater than 2^32-1 (4294967295 decimal), and
-      the minimum value cannot be smaller than 0.  The value of
-      a gauge32 has its maximum value whenever the information
-      being modeled is greater than or equal to its maximum
-      value, and has its minimum value whenever the information
-      being modeled is smaller than or equal to its minimum value.
-      If the information being modeled subsequently decreases
-      below (increases above) the maximum (minimum) value, the
-      gauge32 also decreases (increases).
-
-      In the value set and its semantics, this type is equivalent
-      to the Gauge32 type of the SMIv2.";
-    reference
-     "RFC 2578: Structure of Management Information Version 2
-                (SMIv2)";
-  }
-
-  typedef gauge64 {
-    type uint64;
-    description
-     "The gauge64 type represents a non-negative integer, which
-      may increase or decrease, but shall never exceed a maximum
-      value, nor fall below a minimum value.  The maximum value
-      cannot be greater than 2^64-1 (18446744073709551615), and
-      the minimum value cannot be smaller than 0.  The value of
-      a gauge64 has its maximum value whenever the information
-      being modeled is greater than or equal to its maximum
-      value, and has its minimum value whenever the information
-      being modeled is smaller than or equal to its minimum value.
-      If the information being modeled subsequently decreases
-      below (increases above) the maximum (minimum) value, the
-      gauge64 also decreases (increases).
-
-      In the value set and its semantics, this type is equivalent
-      to the CounterBasedGauge64 SMIv2 textual convention defined
-      in RFC 2856";
-    reference
-     "RFC 2856: Textual Conventions for Additional High Capacity
-                Data Types";
-  }
-
-  /*** collection of identifier-related types ***/
-
-  typedef object-identifier {
-    type string {
-      pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
-            + '(\.(0|([1-9]\d*)))*';
-    }
-    description
-     "The object-identifier type represents administratively
-      assigned names in a registration-hierarchical-name tree.
-
-      Values of this type are denoted as a sequence of numerical
-      non-negative sub-identifier values.  Each sub-identifier
-      value MUST NOT exceed 2^32-1 (4294967295).  Sub-identifiers
-      are separated by single dots and without any intermediate
-      whitespace.
-
-      The ASN.1 standard restricts the value space of the first
-      sub-identifier to 0, 1, or 2.  Furthermore, the value space
-      of the second sub-identifier is restricted to the range
-      0 to 39 if the first sub-identifier is 0 or 1.  Finally,
-      the ASN.1 standard requires that an object identifier
-      has always at least two sub-identifiers.  The pattern
-      captures these restrictions.
-
-      Although the number of sub-identifiers is not limited,
-      module designers should realize that there may be
-      implementations that stick with the SMIv2 limit of 128
-      sub-identifiers.
-
-      This type is a superset of the SMIv2 OBJECT IDENTIFIER type
-      since it is not restricted to 128 sub-identifiers.  Hence,
-      this type SHOULD NOT be used to represent the SMIv2 OBJECT
-      IDENTIFIER type; the object-identifier-128 type SHOULD be
-      used instead.";
-    reference
-     "ISO9834-1: Information technology -- Open Systems
-      Interconnection -- Procedures for the operation of OSI
-      Registration Authorities: General procedures and top
-      arcs of the ASN.1 Object Identifier tree";
-  }
-
-  typedef object-identifier-128 {
-    type object-identifier {
-      pattern '\d*(\.\d*){1,127}';
-    }
-    description
-     "This type represents object-identifiers restricted to 128
-      sub-identifiers.
-
-      In the value set and its semantics, this type is equivalent
-      to the OBJECT IDENTIFIER type of the SMIv2.";
-    reference
-     "RFC 2578: Structure of Management Information Version 2
-                (SMIv2)";
-  }
-
-  typedef yang-identifier {
-    type string {
-      length "1..max";
-      pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
-      pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*';
-    }
-    description
-      "A YANG identifier string as defined by the 'identifier'
-       rule in Section 12 of RFC 6020.  An identifier must
-       start with an alphabetic character or an underscore
-       followed by an arbitrary sequence of alphabetic or
-       numeric characters, underscores, hyphens, or dots.
-
-       A YANG identifier MUST NOT start with any possible
-       combination of the lowercase or uppercase character
-       sequence 'xml'.";
-    reference
-      "RFC 6020: YANG - A Data Modeling Language for the Network
-                 Configuration Protocol (NETCONF)";
-  }
-
-  /*** collection of types related to date and time***/
-
-  typedef date-and-time {
-    type string {
-      pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
-            + '(Z|[\+\-]\d{2}:\d{2})';
-    }
-    description
-     "The date-and-time type is a profile of the ISO 8601
-      standard for representation of dates and times using the
-      Gregorian calendar.  The profile is defined by the
-      date-time production in Section 5.6 of RFC 3339.
-
-      The date-and-time type is compatible with the dateTime XML
-      schema type with the following notable exceptions:
-
-      (a) The date-and-time type does not allow negative years.
-
-      (b) The date-and-time time-offset -00:00 indicates an unknown
-          time zone (see RFC 3339) while -00:00 and +00:00 and Z
-          all represent the same time zone in dateTime.
-
-      (c) The canonical format (see below) of data-and-time values
-          differs from the canonical format used by the dateTime XML
-          schema type, which requires all times to be in UTC using
-          the time-offset 'Z'.
-
-      This type is not equivalent to the DateAndTime textual
-      convention of the SMIv2 since RFC 3339 uses a different
-      separator between full-date and full-time and provides
-      higher resolution of time-secfrac.
-
-      The canonical format for date-and-time values with a known time
-      zone uses a numeric time zone offset that is calculated using
-      the device's configured known offset to UTC time.  A change of
-      the device's offset to UTC time will cause date-and-time values
-      to change accordingly.  Such changes might happen periodically
-      in case a server follows automatically daylight saving time
-      (DST) time zone offset changes.  The canonical format for
-      date-and-time values with an unknown time zone (usually
-      referring to the notion of local time) uses the time-offset
-      -00:00.";
-    reference
-     "RFC 3339: Date and Time on the Internet: Timestamps
-      RFC 2579: Textual Conventions for SMIv2
-      XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
-  }
-
-  typedef timeticks {
-    type uint32;
-    description
-     "The timeticks type represents a non-negative integer that
-      represents the time, modulo 2^32 (4294967296 decimal), in
-      hundredths of a second between two epochs.  When a schema
-      node is defined that uses this type, the description of
-      the schema node identifies both of the reference epochs.
-
-      In the value set and its semantics, this type is equivalent
-      to the TimeTicks type of the SMIv2.";
-    reference
-     "RFC 2578: Structure of Management Information Version 2
-                (SMIv2)";
-  }
-
-  typedef timestamp {
-    type yang:timeticks;
-    description
-     "The timestamp type represents the value of an associated
-      timeticks schema node at which a specific occurrence
-      happened.  The specific occurrence must be defined in the
-      description of any schema node defined using this type.  When
-      the specific occurrence occurred prior to the last time the
-      associated timeticks attribute was zero, then the timestamp
-      value is zero.  Note that this requires all timestamp values
-      to be reset to zero when the value of the associated timeticks
-      attribute reaches 497+ days and wraps around to zero.
-
-      The associated timeticks schema node must be specified
-      in the description of any schema node using this type.
-
-      In the value set and its semantics, this type is equivalent
-      to the TimeStamp textual convention of the SMIv2.";
-    reference
-     "RFC 2579: Textual Conventions for SMIv2";
-  }
-
-  /*** collection of generic address types ***/
-
-  typedef phys-address {
-    type string {
-      pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
-    }
-
-
-
-
-    description
-     "Represents media- or physical-level addresses represented
-      as a sequence octets, each octet represented by two hexadecimal
-      numbers.  Octets are separated by colons.  The canonical
-      representation uses lowercase characters.
-
-      In the value set and its semantics, this type is equivalent
-      to the PhysAddress textual convention of the SMIv2.";
-    reference
-     "RFC 2579: Textual Conventions for SMIv2";
-  }
-
-  typedef mac-address {
-    type string {
-      pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
-    }
-    description
-     "The mac-address type represents an IEEE 802 MAC address.
-      The canonical representation uses lowercase characters.
-
-      In the value set and its semantics, this type is equivalent
-      to the MacAddress textual convention of the SMIv2.";
-    reference
-     "IEEE 802: IEEE Standard for Local and Metropolitan Area
-                Networks: Overview and Architecture
-      RFC 2579: Textual Conventions for SMIv2";
-  }
-
-  /*** collection of XML-specific types ***/
-
-  typedef xpath1.0 {
-    type string;
-    description
-     "This type represents an XPATH 1.0 expression.
-
-      When a schema node is defined that uses this type, the
-      description of the schema node MUST specify the XPath
-      context in which the XPath expression is evaluated.";
-    reference
-     "XPATH: XML Path Language (XPath) Version 1.0";
-  }
-
-  /*** collection of string types ***/
-
-  typedef hex-string {
-    type string {
-      pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
-    }
-    description
-     "A hexadecimal string with octets represented as hex digits
-      separated by colons.  The canonical representation uses
-      lowercase characters.";
-  }
-
-  typedef uuid {
-    type string {
-      pattern '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-'
-            + '[0-9a-fA-F]{4}-[0-9a-fA-F]{12}';
-    }
-    description
-     "A Universally Unique IDentifier in the string representation
-      defined in RFC 4122.  The canonical representation uses
-      lowercase characters.
-
-      The following is an example of a UUID in string representation:
-      f81d4fae-7dec-11d0-a765-00a0c91e6bf6
-      ";
-    reference
-     "RFC 4122: A Universally Unique IDentifier (UUID) URN
-                Namespace";
-  }
-
-  typedef dotted-quad {
-    type string {
-      pattern
-        '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
-      + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])';
-    }
-    description
-      "An unsigned 32-bit number expressed in the dotted-quad
-       notation, i.e., four octets written as decimal numbers
-       and separated with the '.' (full stop) character.";
-  }
-}