Move OOM codeHEADmaster

Move OOM clamp code to its own repository

Issue-ID: CLAMP-548
Change-Id: Ibf61f82a7ed3f7f778882c5ecf24da946ca92751
Signed-off-by: sebdet <sebastien.determe@intl.att.com>

59 files changed, 3859 insertions, 0 deletions

diff --git a/Chart.yaml b/Chart.yaml
new file mode 100644
index 0000000..54f2df1
--- /dev/null
+++ b/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp
+name: clamp
+version: 5.0.0
diff --git a/charts/clamp-backend/Chart.yaml b/charts/clamp-backend/Chart.yaml
new file mode 100644
index 0000000..a6aec46
--- /dev/null
+++ b/charts/clamp-backend/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp
+name: clamp-backend
+version: 5.0.0
diff --git a/charts/clamp-backend/requirements.yaml b/charts/clamp-backend/requirements.yaml
new file mode 100644
index 0000000..05d49a8
--- /dev/null
+++ b/charts/clamp-backend/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    # local reference to common chart, as it is
+    # a part of this chart's package and will not
+    # be published independently to a repo (at this point)
+    repository: '@local'
diff --git a/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml b/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000..dab2e44
--- /dev/null
+++ b/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,53 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/charts/clamp-backend/resources/config/logback.xml b/charts/clamp-backend/resources/config/logback.xml
new file mode 100644
index 0000000..551ed34
--- /dev/null
+++ b/charts/clamp-backend/resources/config/logback.xml
@@ -0,0 +1,316 @@
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+	<jmxConfigurator />
+	<!-- Example evaluator filter applied against console appender -->
+	<property
+		name="p_tim"
+		value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}" />
+	<property
+		name="p_lvl"
+		value="%level" />
+	<property
+		name="p_log"
+		value="%logger" />
+	<property
+		name="p_mdc"
+		value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
+	<property
+		name="p_msg"
+		value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_exc"
+		value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_mak"
+		value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_thr"
+		value="%thread" />
+	<property
+		name="defaultPattern"
+		value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+	<property
+		name="debugPattern"
+		value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
+
+	<!-- Example evaluator filter applied against console appender -->
+	<appender
+		name="STDOUT"
+		class="ch.qos.logback.core.ConsoleAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>INFO</level>
+		</filter>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender
+		name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>INFO</level>
+		</filter>
+		<file>${logDirectory}/error.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>${defaultPattern}</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+			<fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
+			</fileNamePattern>
+			<maxFileSize>50MB</maxFileSize>
+			<maxHistory>30</maxHistory>
+			<totalSizeCap>10GB</totalSizeCap>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+
+	<appender
+		name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/debug.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+			<fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
+			</fileNamePattern>
+			<maxFileSize>50MB</maxFileSize>
+			<maxHistory>30</maxHistory>
+			<totalSizeCap>10GB</totalSizeCap>
+		</rollingPolicy>
+	</appender>
+
+
+	<appender
+		name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/audit.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/audit.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFAudit"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender
+		name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/metric.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+				%msg%n</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/metric.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFMetrics"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<!-- SECURITY related loggers -->
+	<appender
+		name="SECURITY"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/security.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/security.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFSecurity"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="SECURITY" />
+	</appender>
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender
+		name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender
+		name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+
+	<logger
+		name="org.onap.aaf"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<logger
+		name="org.apache"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<!-- Spring related loggers -->
+	<logger
+		name="org.springframework"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+
+	<!-- CLDS related loggers -->
+	<logger
+		name="org.onap.clamp"
+		level="DEBUG">
+		<appender-ref ref="ERROR" />
+		<appender-ref ref="DEBUG" />
+	</logger>
+
+	<!-- CLDS related loggers -->
+	<logger
+		name="com.att.eelf.error"
+		level="OFF">
+		<appender-ref ref="ERROR" />
+	</logger>
+	<!-- EELF related loggers -->
+	<logger
+		name="com.att.eelf.audit"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="asyncEELFAudit" />
+	</logger>
+	<logger
+		name="com.att.eelf.metrics"
+		level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFMetrics" />
+	</logger>
+	<logger
+		name="com.att.eelf.security"
+		level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFSecurity" />
+	</logger>
+
+	<!-- logback internals logging -->
+	<logger
+		name="ch.qos.logback.classic"
+		level="INFO" />
+	<logger
+		name="ch.qos.logback.core"
+		level="INFO" />
+	<logger
+		name="AuditRecord"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger
+		name="AuditRecord_DirectCall"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger
+		name="PerfTrackerRecord"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<root level="DEBUG">
+		<appender-ref ref="DEBUG" />
+		<appender-ref ref="STDOUT" />
+	</root>
+</included>
diff --git a/charts/clamp-backend/resources/config/sdc-controllers-config.json b/charts/clamp-backend/resources/config/sdc-controllers-config.json
new file mode 100644
index 0000000..3adda95
--- /dev/null
+++ b/charts/clamp-backend/resources/config/sdc-controllers-config.json
@@ -0,0 +1,18 @@
+{
+  "sdc-connections":{
+    "sdc-controller":{
+        "user": "clamp",
+        "consumerGroup": "clamp",
+        "consumerId": "clamp",
+        "environmentName": "AUTO",
+        "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443",
+        "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
+        "pollingInterval":30,
+        "pollingTimeout":30,
+        "activateServerTLSAuth":"false",
+        "keyStorePassword":"",
+        "keyStorePath":"",
+        "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"]
+    }
+  }
+}
diff --git a/charts/clamp-backend/templates/NOTES.txt b/charts/clamp-backend/templates/NOTES.txt
new file mode 100644
index 0000000..e36d6a5
--- /dev/null
+++ b/charts/clamp-backend/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit https://127.0.0.1:8443 to use your application"
+  kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/charts/clamp-backend/templates/configmap.yaml b/charts/clamp-backend/templates/configmap.yaml
new file mode 100644
index 0000000..21df037
--- /dev/null
+++ b/charts/clamp-backend/templates/configmap.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+  spring_application_json: {{ tpl .Values.config.springApplicationJson . | quote }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Release.Name }}-clamp-filebeat-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
diff --git a/charts/clamp-backend/templates/deployment.yaml b/charts/clamp-backend/templates/deployment.yaml
new file mode 100644
index 0000000..6b6fcc7
--- /dev/null
+++ b/charts/clamp-backend/templates/deployment.yaml
@@ -0,0 +1,126 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - mariadb
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        # side car containers
+        - name: {{ include "common.name" . }}-filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-filebeat-conf
+            mountPath: /usr/share/filebeat/filebeat.yml
+            subPath: filebeat.yml
+          - name: {{ include "common.fullname" . }}-data-filebeat
+            mountPath: /usr/share/filebeat/data
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          args:
+            - "-Dcom.att.eelf.logging.file=file:/opt/clamp/logback.xml"
+            - ""
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+          - mountPath: /opt/clamp/sdc-controllers-config.json
+            name: {{ include "common.fullname" . }}-config
+            subPath: sdc-controllers-config.json
+          - mountPath: /opt/clamp/logback.xml
+            name: {{ include "common.fullname" . }}-config
+            subPath: logback.xml
+          env:
+            - name: SPRING_APPLICATION_JSON
+              valueFrom:
+                configMapKeyRef:
+                  name: {{ template "common.fullname" . }}
+                  key: spring_application_json
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: sdc-controllers-config.json
+              path: sdc-controllers-config.json
+            - key: logback.xml
+              path: logback.xml
+        - name: {{ include "common.fullname" . }}-filebeat-conf
+          configMap:
+            name: {{ .Release.Name }}-clamp-filebeat-configmap
+        - name: {{ include "common.fullname" . }}-data-filebeat
+          emptyDir: {}
+        - name:  {{ include "common.fullname" . }}-logs
+          emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/charts/clamp-backend/templates/service.yaml b/charts/clamp-backend/templates/service.yaml
new file mode 100644
index 0000000..f1438a4
--- /dev/null
+++ b/charts/clamp-backend/templates/service.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/charts/clamp-backend/values.yaml b/charts/clamp-backend/values.yaml
new file mode 100644
index 0000000..4981494
--- /dev/null
+++ b/charts/clamp-backend/values.yaml
@@ -0,0 +1,131 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018-2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  persistence: {}
+
+flavor: small
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-backend:4.1.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+  log:
+    logstashServiceName: log-ls
+    logstashPort: 5044
+  mysqlPassword: strong_pitchou
+  dataRootDir: /dockerdata-nfs
+  springApplicationJson: >
+    {
+        "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clampdb.{{ include "common.namespace" . }}:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3",
+        "spring.profiles.active": "clamp-default,clamp-default-user,clamp-sdc-controller-new",
+        "clamp.config.sdc.catalog.url": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/",
+        "clamp.config.sdc.hostUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/",
+        "clamp.config.sdc.serviceUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/services",
+        "clamp.config.sdc.serviceUsername": "clamp",
+        "clamp.config.sdc.servicePassword": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
+        "clamp.config.files.sdcController": "file:/opt/clamp/sdc-controllers-config.json",
+        "clamp.config.dcae.inventory.url": "https4://inventory.{{ include "common.namespace" . }}:8080",
+        "clamp.config.dcae.dispatcher.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443",
+        "clamp.config.dcae.deployment.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443",
+        "clamp.config.dcae.deployment.userName": "none",
+        "clamp.config.dcae.deployment.password": "none",
+        "clamp.config.policy.api.url": "https4://policy-api.{{ include "common.namespace" . }}:6969",
+        "clamp.config.policy.api.userName": "healthcheck",
+        "clamp.config.policy.api.password": "zb!XztG34",
+        "clamp.config.policy.pap.url": "https4://policy-pap.{{ include "common.namespace" . }}:6969",
+        "clamp.config.policy.pap.userName": "healthcheck",
+        "clamp.config.policy.pap.password": "zb!XztG34",
+        "clamp.config.policy.pdpUrl1": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123",
+        "clamp.config.policy.pdpUrl2": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123",
+        "clamp.config.policy.papUrl": "https://pap.{{ include "common.namespace" . }}:9091/pap/ , testpap, alpha123",
+        "clamp.config.policy.clientKey": "dGVzdA==",
+        "clamp.config.cadi.aafLocateUrl": "https://aaf-locate.{{ include "common.namespace" . }}:8095",
+        "com.att.eelf.logging.path": "/opt/clamp",
+        "com.att.eelf.logging.file": "logback.xml"
+    }
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+
+service:
+  type: ClusterIP
+  name: clamp-backend
+  portName: clamp-backend
+  internalPort: 8443
+  externalPort: 443
+
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  unlimited: {}
diff --git a/charts/clamp-dash-es/Chart.yaml b/charts/clamp-dash-es/Chart.yaml
new file mode 100644
index 0000000..c43b7f3
--- /dev/null
+++ b/charts/clamp-dash-es/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Elasticsearch
+name: clamp-dash-es
+version: 5.0.0
diff --git a/charts/clamp-dash-es/requirements.yaml b/charts/clamp-dash-es/requirements.yaml
new file mode 100644
index 0000000..57ee781
--- /dev/null
+++ b/charts/clamp-dash-es/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    repository: '@local'
diff --git a/charts/clamp-dash-es/resources/config/elasticsearch.yml b/charts/clamp-dash-es/resources/config/elasticsearch.yml
new file mode 100644
index 0000000..26affe6
--- /dev/null
+++ b/charts/clamp-dash-es/resources/config/elasticsearch.yml
@@ -0,0 +1,154 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ======================== Elasticsearch Configuration =========================
+#
+# NOTE: Elasticsearch comes with reasonable defaults for most settings.
+#       Before you set out to tweak and tune the configuration, make sure you
+#       understand what are you trying to accomplish and the consequences.
+#
+# The primary way of configuring a node is via this file. This template lists
+# the most important settings you may want to configure for a production cluster.
+#
+# Please consult the documentation for further information on configuration options:
+# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
+#
+# ---------------------------------- Cluster -----------------------------------
+#
+# Name of the Elasticsearch cluster.
+# A node can only join a cluster when it shares its cluster.name with all the other nodes in the cluster.
+# The default name is elasticsearch, but you should change it to an appropriate name which describes the
+# purpose of the cluster.
+#
+cluster.name: "clamp-dashboard"
+#
+# The port that other nodes in the cluster should use when communicating with this node.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_port:$transport.publish_port
+#
+# The host address to publish for nodes in the cluster to connect to.
+# Required for Elasticsearch's nodes running on different cluster nodes.
+# More : https://www.elastic.co/guide/en/elasticsearch/reference/current/modules-transport.html
+#transport.publish_host:$transport.publish_host
+#
+# ------------------------------------ Node ------------------------------------
+#
+# It is better to provide different meaningfull names fot different elastic nodes.
+# By default, Elasticsearch will take the 7 first character of the randomly generated uuid used as the node id.
+# Note that the node id is persisted and does not change when a node restarts
+#
+#node.name: $node.name
+#
+# Add custom attributes to the node:
+#
+#node.attr.rack: r1
+#
+# ----------------------------------- Paths ------------------------------------
+#
+# The location of the data files of each index / shard allocated on the node. Can hold multiple locations separated by coma.
+# In production, we should not keep this default to "/elasticsearch/data", as on upgrading Elasticsearch, directory structure
+# may change & can deal to data loss.
+path.data: /usr/share/elasticsearch/data
+#
+# Elasticsearch's log files location. In production, we should not keep this default to "/elasticsearch/logs",
+# as on upgrading Elasticsearch, directory structure may change.
+path.logs: /usr/share/elasticsearch/logs
+#
+# ----------------------------------- Memory -----------------------------------
+#
+# It is vitally important to the health of your node that none of the JVM is ever swapped out to disk.
+# Lock the memory on startup.
+#
+bootstrap.memory_lock: false
+#
+# Make sure that the heap size is set to about half the memory available
+# on the system and that the owner of the process is allowed to use this
+# limit.
+#
+# Elasticsearch performs poorly when the system is swapping the memory.
+#
+# ---------------------------------- Network -----------------------------------
+#
+# Set the bind address to a specific IP (IPv4 or IPv6):
+# In order to communicate and to form a cluster with nodes on other servers, your node will need to bind to a
+# non-loopback address.
+network.host: 0.0.0.0
+#
+# Set a custom port for HTTP: If required, default is 9200-9300
+#
+#http.port: $http.port
+#
+# For more information, consult the network module documentation.
+#
+# --------------------------------- Discovery ----------------------------------
+#
+# Pass an initial list of hosts to perform discovery when new node is started
+# To form a cluster with nodes on other servers, you have to provide a seed list of other nodes in the cluster
+# that are likely to be live and contactable.
+# By default, Elasticsearch will bind to the available loopback addresses and will scan ports 9300 to 9305 to try
+# to connect to other nodes running on the same server.
+#
+#$discovery.zen.ping.unicast.hosts
+#
+# This setting tells Elasticsearch to not elect a master unless there are enough master-eligible nodes
+# available. Only then will an election take place.
+# Prevent the "split brain" by configuring the majority of nodes (total number of master-eligible nodes / 2 + 1):
+discovery.zen.minimum_master_nodes: 1
+#
+# For more information, consult the zen discovery module documentation.
+#
+# ---------------------------------- Gateway -----------------------------------
+#
+# Block initial recovery after a full cluster restart until N nodes are started:
+#
+#gateway.recover_after_nodes: 3
+#
+# For more information, consult the gateway module documentation.
+#
+# ---------------------------------- Various -----------------------------------
+#
+# Require explicit names when deleting indices:
+#
+#action.destructive_requires_name: true
+# Set a custom port for HTTP: If required, default is 9200-9300
+# This is used for REST APIs
+http.port: {{.Values.service.externalPort}}
+# Port to bind for communication between nodes. Accepts a single value or a range.
+# If a range is specified, the node will bind to the first available port in the range.
+# Defaults to 9300-9400.
+# More info:
+transport.tcp.port: {{.Values.service.externalPort2}}
+#xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+#xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+#xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+
+
+#xpack.watcher.enabled: false
+#Set to false to disable Watcher.
+
+#xpack.license.self_generated.type: basic
+#xpack.security.enabled: false
+
+## Search Guard
+#
+searchguard.enterprise_modules_enabled: false
+searchguard.ssl.transport.keystore_filepath: sg/node-0-keystore.jks
+searchguard.ssl.transport.truststore_filepath: sg/truststore.jks
+searchguard.ssl.transport.enforce_hostname_verification: false
+
+searchguard.authcz.admin_dn:
+  - "CN=kirk,OU=client,O=client,l=tEst,C=De"
diff --git a/charts/clamp-dash-es/templates/configmap.yaml b/charts/clamp-dash-es/templates/configmap.yaml
new file mode 100644
index 0000000..5a5e6db
--- /dev/null
+++ b/charts/clamp-dash-es/templates/configmap.yaml
@@ -0,0 +1,27 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/charts/clamp-dash-es/templates/deployment.yaml b/charts/clamp-dash-es/templates/deployment.yaml
new file mode 100644
index 0000000..5070f24
--- /dev/null
+++ b/charts/clamp-dash-es/templates/deployment.yaml
@@ -0,0 +1,119 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /bin/sh
+        - -c
+        - |
+          sysctl -w vm.max_map_count=262144
+          mkdir -p /usr/share/elasticsearch/logs
+          mkdir -p /usr/share/elasticsearch/data
+          chmod -R 777 /usr/share/elasticsearch
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        securityContext:
+          privileged: true
+        image: {{ .Values.global.busyboxRepository | default .Values.busyboxRepository }}/{{ .Values.busyboxImage }}
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: init-sysctl
+        volumeMounts:
+        - name: {{ include "common.fullname" . }}-logs
+          mountPath: /usr/share/elasticsearch/logs/
+        - name: {{ include "common.fullname" . }}-data
+          mountPath: /usr/share/elasticsearch/data/
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ include "common.servicename" . }}
+          - containerPort: {{ .Values.service.internalPort2 }}
+            name: {{ include "common.servicename" . }}2
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort2 }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/elasticsearch/config/elasticsearch.yml
+            name: {{ include "common.fullname" . }}-config
+            subPath: elasticsearch.yml
+          - mountPath: /usr/share/elasticsearch/data/
+            name: {{ include "common.fullname" . }}-data
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: elasticsearch.yml
+              path: elasticsearch.yml
+        - name: {{ include "common.fullname" . }}-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+        - name: {{ include "common.fullname" . }}-logs
+          hostPath:
+            path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPathLogs }}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/charts/clamp-dash-es/templates/pv.yaml b/charts/clamp-dash-es/templates/pv.yaml
new file mode 100644
index 0000000..fd21cdf
--- /dev/null
+++ b/charts/clamp-dash-es/templates/pv.yaml
@@ -0,0 +1,36 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/charts/clamp-dash-es/templates/pvc.yaml b/charts/clamp-dash-es/templates/pvc.yaml
new file mode 100644
index 0000000..abab145
--- /dev/null
+++ b/charts/clamp-dash-es/templates/pvc.yaml
@@ -0,0 +1,40 @@
+{{/*
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  selector:
+    matchLabels:
+      name: {{ include "common.fullname" . }}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- end -}}
diff --git a/charts/clamp-dash-es/templates/service.yaml b/charts/clamp-dash-es/templates/service.yaml
new file mode 100644
index 0000000..d207471
--- /dev/null
+++ b/charts/clamp-dash-es/templates/service.yaml
@@ -0,0 +1,68 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.config.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.config.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}-tcp
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type2 }}
+  ports:
+    {{if eq .Values.service.type2 "NodePort" -}}
+    - port: {{ .Values.service.externalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/charts/clamp-dash-es/values.yaml b/charts/clamp-dash-es/values.yaml
new file mode 100644
index 0000000..2d67048
--- /dev/null
+++ b/charts/clamp-dash-es/values.yaml
@@ -0,0 +1,126 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  persistence: {}
+flavor: small
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-dashboard-elasticsearch:4.1.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+# Example:
+config: {}
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  accessMode: ReadWriteOnce
+  size: 4Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: clamp/dashboard-elasticsearch/data
+  mountSubPathLogs: clamp
+
+service:
+  type: ClusterIP
+  name: cdash-es
+  portName: cdash-es-rest
+  externalPort: 9200
+  internalPort: 9200
+  type2: ClusterIP
+  portName2: cdash-es-tcp
+  externalPort2: 9300
+  internalPort2: 9300
+
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 4Gi
+    requests:
+      cpu: 10m
+      memory: 2.5Gi
+  large:
+    limits:
+      cpu: 1
+      memory: 4Gi
+    requests:
+      cpu: 10m
+      memory: 2.5Gi
+  unlimited: {}
diff --git a/charts/clamp-dash-kibana/Chart.yaml b/charts/clamp-dash-kibana/Chart.yaml
new file mode 100644
index 0000000..954eebc
--- /dev/null
+++ b/charts/clamp-dash-kibana/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Kibana
+name: clamp-dash-kibana
+version: 5.0.0
diff --git a/charts/clamp-dash-kibana/requirements.yaml b/charts/clamp-dash-kibana/requirements.yaml
new file mode 100644
index 0000000..57ee781
--- /dev/null
+++ b/charts/clamp-dash-kibana/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    repository: '@local'
diff --git a/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem b/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem
new file mode 100644
index 0000000..ce630d4
--- /dev/null
+++ b/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.crt.pem
@@ -0,0 +1,30 @@
+Bag Attributes
+    friendlyName: clamp@clamp.onap.org
+    localKeyID: 54 69 6D 65 20 31 35 35 33 37 38 37 35 31 38 33 30 33 
+subject=/CN=clamp/emailAddress=/OU=clamp@clamp.onap.org/OU=OSAAF/O=ONAP/C=US
+issuer=/C=US/O=ONAP/OU=OSAAF/CN=intermediateCA_9
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
diff --git a/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem b/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem
new file mode 100644
index 0000000..fcf68bf
--- /dev/null
+++ b/charts/clamp-dash-kibana/resources/certs/org.onap.clamp.key.pem
@@ -0,0 +1,32 @@
+Bag Attributes
+    friendlyName: clamp@clamp.onap.org
+    localKeyID: 54 69 6D 65 20 31 35 35 33 37 38 37 35 31 38 33 30 33 
+Key Attributes: <No Attributes>
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----
diff --git a/charts/clamp-dash-kibana/resources/config/kibana.yml b/charts/clamp-dash-kibana/resources/config/kibana.yml
new file mode 100644
index 0000000..55df82b
--- /dev/null
+++ b/charts/clamp-dash-kibana/resources/config/kibana.yml
@@ -0,0 +1,135 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#xpack.graph.enabled: false
+#Set to false to disable X-Pack graph features.
+#xpack.ml.enabled: false
+#Set to false to disable X-Pack machine learning features.
+#xpack.monitoring.enabled: false
+#Set to false to disable X-Pack monitoring features.
+#xpack.reporting.enabled: false
+#Set to false to disable X-Pack reporting features.
+#xpack.security.enabled: false
+#Set to false to disable X-Pack security features.
+#xpack.watcher.enabled: false
+#Set to false to disable Watcher.
+# Kibana is served by a back end server. This setting specifies the port to use.
+server.port: {{.Values.service.externalPort}}
+
+# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
+# The default is 'localhost', which usually means remote machines will not be able to connect.
+# To allow connections from remote users, set this parameter to a non-loopback address.
+server.host: "0.0.0.0"
+
+# Enables you to specify a path to mount Kibana at if you are running behind a proxy. This only affects
+# the URLs generated by Kibana, your proxy is expected to remove the basePath value before forwarding requests
+# to Kibana. This setting cannot end in a slash.
+#server.basePath: ""
+
+# The maximum payload size in bytes for incoming server requests.
+#server.maxPayloadBytes: 1048576
+
+# The Kibana server's name.  This is used for display purposes.
+server.name: "Clamp Dashboard"
+
+# The URL of the Elasticsearch instance to use for all your queries.
+elasticsearch.url: "http://{{.Values.config.elasticsearchServiceName}}.{{ include "common.namespace" . }}:{{.Values.config.elasticsearchPort}}"
+# When this setting's value is true Kibana uses the hostname specified in the server.host
+# setting. When the value of this setting is false, Kibana uses the hostname of the host
+# that connects to this Kibana instance.
+#elasticsearch.preserveHost: true
+
+# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
+# dashboards. Kibana creates a new index if the index doesn't already exist.
+#kibana.index: ".kibana"
+
+# The default application to load.
+#kibana.defaultAppId: "discover"
+
+# If your Elasticsearch is protected with basic authentication, these settings provide
+# the username and password that the Kibana server uses to perform maintenance on the Kibana
+# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
+# is proxied through the Kibana server.
+#elasticsearch.username: "elastic"
+#elasticsearch.password: "changeme"
+# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
+# These settings enable SSL for outgoing requests from the Kibana server to the browser.
+server.ssl.enabled: {{.Values.config.sslEnabled}}
+server.ssl.certificate: {{.Values.config.sslPemCertFilePath}}
+server.ssl.key: {{.Values.config.sslPemkeyFilePath}}
+
+# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
+# These files validate that your Elasticsearch backend uses the same key files.
+#elasticsearch.ssl.certificate: $elasticsearch_ssl_certificate
+#elasticsearch.ssl.key: $elasticsearch_ssl_key
+
+# Optional setting that enables you to specify a path to the PEM file for the certificate
+# authority for your Elasticsearch instance.
+#elasticsearch.ssl.certificateAuthorities: $elasticsearch_ssl_certificateAuthorities
+
+# To disregard the validity of SSL certificates, change this setting's value to 'none'.
+#elasticsearch.ssl.verificationMode: $elasticsearch_ssl_verificationMode
+
+# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
+# the elasticsearch.requestTimeout setting.
+#elasticsearch.pingTimeout: 1500
+
+# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
+# must be a positive integer.
+#elasticsearch.requestTimeout: 30000
+
+# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
+# headers, set this value to [] (an empty list).
+#elasticsearch.requestHeadersWhitelist: [ authorization ]
+
+# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
+# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
+#elasticsearch.customHeaders: {}
+
+# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
+#elasticsearch.shardTimeout: 0
+
+# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
+#elasticsearch.startupTimeout: 5000
+
+# Specifies the path where Kibana creates the process ID file.
+#pid.file: /var/run/kibana.pid
+
+# Enables you specify a file where Kibana stores log output.
+#logging.dest: stdout
+
+# Set the value of this setting to true to suppress all logging output.
+#logging.silent: false
+
+# Set the value of this setting to true to suppress all logging output other than error messages.
+#logging.quiet: false
+
+# Set the value of this setting to true to log all events, including system usage information
+# and all requests.
+#logging.verbose: false
+
+# Set the interval in milliseconds to sample system and process performance
+# metrics. Minimum is 100ms. Defaults to 5000.
+#ops.interval: 5000
+
+# The default locale. This locale can be used in certain circumstances to substitute any missing
+# translations.
+#i18n.defaultLocale: "en"
+
+## Search Guard
+#
+#xpack.security.enabled: false
+elasticsearch.username: {{.Values.config.elasticUSR}}
+elasticsearch.password: {{.Values.config.elasticPWD}}
+
+searchguard.cookie.password: 123567818187654rwrwfsfshdhdhtegdhfzftdhncn
diff --git a/charts/clamp-dash-kibana/templates/configmap.yaml b/charts/clamp-dash-kibana/templates/configmap.yaml
new file mode 100644
index 0000000..8fcd405
--- /dev/null
+++ b/charts/clamp-dash-kibana/templates/configmap.yaml
@@ -0,0 +1,36 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}-aaf-pem-keys
+  namespace: {{ include "common.namespace" . }}
+type: Opaque
+data:
+{{ tpl (.Files.Glob "resources/certs/*").AsSecrets . | indent 2 }}
diff --git a/charts/clamp-dash-kibana/templates/deployment.yaml b/charts/clamp-dash-kibana/templates/deployment.yaml
new file mode 100644
index 0000000..31752fc
--- /dev/null
+++ b/charts/clamp-dash-kibana/templates/deployment.yaml
@@ -0,0 +1,104 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - clamp-dash-es
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ include "common.servicename" . }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          env:
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/kibana/config/kibana.yml
+            name: {{ include "common.fullname" . }}
+            subPath: kibana.yml
+          - name: {{ include "common.fullname" . }}-aaf-pem-certs
+            mountPath: /usr/share/kibana/config/keystore/
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: kibana.yml
+              path: kibana.yml
+        - name: {{ include "common.fullname" . }}-aaf-pem-certs
+          secret:
+            secretName: {{ include "common.fullname" . }}-aaf-pem-keys
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/charts/clamp-dash-kibana/templates/service.yaml b/charts/clamp-dash-kibana/templates/service.yaml
new file mode 100644
index 0000000..5c8b6ba
--- /dev/null
+++ b/charts/clamp-dash-kibana/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.config.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.config.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/charts/clamp-dash-kibana/values.yaml b/charts/clamp-dash-kibana/values.yaml
new file mode 100644
index 0000000..8858716
--- /dev/null
+++ b/charts/clamp-dash-kibana/values.yaml
@@ -0,0 +1,111 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  persistence: {}
+flavor: small
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# BusyBox image
+busyboxRepository: registry.hub.docker.com
+busyboxImage: library/busybox:latest
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-dashboard-kibana:4.1.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  elasticsearchServiceName: cdash-es
+  elasticsearchPort: 9200
+  elasticUSR: kibanaserver
+  elasticPWD: kibanaserver
+  sslEnabled: true
+  sslPemCertFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.crt.pem
+  sslPemkeyFilePath: /usr/share/kibana/config/keystore/org.onap.clamp.key.pem
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 360
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  #Example service definition with external, internal and node ports.
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: NodePort
+  name: cdash-kibana
+  portName: cdash-kibana-http
+  externalPort: 5601
+  internalPort: 5601
+  nodePort: 90
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 2Gi
+    requests:
+      cpu: 10m
+      memory: 750Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 2Gi
+    requests:
+      cpu: 10m
+      memory: 750Mi
+  unlimited: {}
diff --git a/charts/clamp-dash-logstash/Chart.yaml b/charts/clamp-dash-logstash/Chart.yaml
new file mode 100644
index 0000000..4960a70
--- /dev/null
+++ b/charts/clamp-dash-logstash/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp Dashboard Logstash
+name: clamp-dash-logstash
+version: 5.0.0
diff --git a/charts/clamp-dash-logstash/requirements.yaml b/charts/clamp-dash-logstash/requirements.yaml
new file mode 100644
index 0000000..57ee781
--- /dev/null
+++ b/charts/clamp-dash-logstash/requirements.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    repository: '@local'
diff --git a/charts/clamp-dash-logstash/resources/certs/aafca.pem b/charts/clamp-dash-logstash/resources/certs/aafca.pem
new file mode 100644
index 0000000..cf12ec4
--- /dev/null
+++ b/charts/clamp-dash-logstash/resources/certs/aafca.pem
@@ -0,0 +1,26 @@
+-----BEGIN CERTIFICATE-----
+MIIEVDCCAjygAwIBAgIBAjANBgkqhkiG9w0BAQsFADAsMQ4wDAYDVQQLDAVPU0FB
+RjENMAsGA1UECgwET05BUDELMAkGA1UEBhMCVVMwHhcNMTgwNjA1MDg1MTQxWhcN
+MjMwNjA1MDg1MTQxWjBHMQswCQYDVQQGEwJVUzENMAsGA1UECgwET05BUDEOMAwG
+A1UECwwFT1NBQUYxGTAXBgNVBAMMEGludGVybWVkaWF0ZUNBXzEwggEiMA0GCSqG
+SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDOXCdZIoWM0EnEEw3qPiVMhAgNolWCTaLt
+eI2TjlTQdGDIcXdBZukHdNeOKYzOXRsLt6bLRtd5yARpn53EbzS/dgAyHuaz1HjE
+5IPWSFRg9SulfHUmcS+GBt1+KiMJTlOsw6wSA73H/PjjXBbWs/uRJTnaNmV3so7W
+DhNW6fHOrbom4p+3FucbB/QAM9b/3l/1LKnRgdXx9tekDnaKN5u3HVBmyOlRhaRp
+tscLUCT3jijoGAPRcYZybgrpa0z3iCWquibTO/eLwuO/Dn7yHWau9ZZAHGPBSn9f
+TiLKRYV55mNjr3zvs8diTPECFPW8w8sRIH3za1aKHgUC1gd87Yr3AgMBAAGjZjBk
+MB0GA1UdDgQWBBQa1FdycErTZ6nr4dxiMbKH0P7vqjAfBgNVHSMEGDAWgBRTVTPy
+S+vQUbHBeJrBKDF77+rtSTASBgNVHRMBAf8ECDAGAQH/AgEAMA4GA1UdDwEB/wQE
+AwIBhjANBgkqhkiG9w0BAQsFAAOCAgEAlA/RTPy5i09fJ4ytSAmAdytMwEwRaU9F
+dshG7LU9q95ODsuM79yJvV9+ISIJZRsBqf5PDv93bUCKKHIYGvR6kNd+n3yx/fce
+txDkC/tMj1T9D8TuDKAclGEO9K5+1roOQQFxr4SE6XKb/wjn8OMrCoJ75S0F3htF
+LKL85T77JeGeNgSk8JEsZvQvj32m0gv9rxi5jM/Zi5E2vxrBR9T1v3kVvlt6+PSF
+BoHXROk5HQmdHxnH+VYQtDHSwj9Xe9aoJMyL0WjYKd//8NUO+VACDOtK4Nia6gy9
+m/n9kMASMw6f9iF4n6t4902RWrRKTYM1CVu5wyVklVbEdE9i6Db4CpL9E8HpBUAP
+t44JiNzuFkDmSE/z5XuQIimDt6nzOaSF8pX2KHY2ICDLwpMNUvxzqXD9ECbdspiy
+JC2RGq8uARGGl6kQQBKDNO8SrO7rSBPANd1+LgqrKbCrHYfvFgkZPgT5MlQi+E1G
+LNT+i6fzZha9ed/L6yjl5Em71flJGFwRZl2pfErZRxp8pLPcznYyIpSjcwnqNCRC
+orhlp8nheiODC3oO3AFHDiFgUqvm8hgpnT2cPk2lpU2VY1TcZ8sW5qUDCxINIPcW
+u1SAsa87IJK3vEzPZfTCs/S6XThoqRfXj0c0Rahj7YFRi/PqIPY0ejwdtmZ9m9pZ
+8Lb0GYmlo44=
+-----END CERTIFICATE-----
diff --git a/charts/clamp-dash-logstash/resources/config/logstash.yml b/charts/clamp-dash-logstash/resources/config/logstash.yml
new file mode 100644
index 0000000..369b582
--- /dev/null
+++ b/charts/clamp-dash-logstash/resources/config/logstash.yml
@@ -0,0 +1,29 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+http.host: "0.0.0.0"
+## Path where pipeline configurations reside
+path.config: /usr/share/logstash/pipeline
+
+## Type of queue : memeory based or file based
+#queue.type: persisted
+## Size of queue
+#queue.max_bytes: 1024mb
+## Setting true makes logstash check periodically for change in pipeline configurations
+config.reload.automatic: true
+
+## xpack configurations
+#xpack.monitoring.elasticsearch.url: ["http://10.247.186.12:9200", "http://10.247.186.13:9200"]
+#xpack.monitoring.elasticsearch.username: elastic
+#xpack.monitoring.elasticsearch.password: changeme
+#xpack.monitoring.enabled: false
diff --git a/charts/clamp-dash-logstash/resources/config/pipeline.conf b/charts/clamp-dash-logstash/resources/config/pipeline.conf
new file mode 100644
index 0000000..05d8085
--- /dev/null
+++ b/charts/clamp-dash-logstash/resources/config/pipeline.conf
@@ -0,0 +1,250 @@
+# Copyright (c) 2018 AT&T Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+input {
+    http_poller {
+        urls => {
+            event_queue => {
+                method => get
+                url => "${dmaap_base_url}/events/${event_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+                headers => {
+                    Accept => "application/json"
+                }
+                topic => "${event_topic}"
+                tags => [ "dmaap_source" ]
+            }
+            notification_queue => {
+                method => get
+                url => "${dmaap_base_url}/events/${notification_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+                headers => {
+                    Accept => "application/json"
+                }
+                topic => "${notification_topic}"
+                tags => [ "dmaap_source" ]
+            }
+            request_queue => {
+                method => get
+                url => "${dmaap_base_url}/events/${request_topic}/${dmaap_consumer_group}/${dmaap_consumer_id}?timeout=15000"
+                headers => {
+                    Accept => "application/json"
+                }
+                topic => "${request_topic}"
+                tags => [ "dmaap_source" ]
+            }
+        }
+        socket_timeout => 30
+        request_timeout => 30
+        schedule => { "every" => "1m" }
+        codec => "plain"
+        cacert => "/certs.d/aafca.pem"
+    }
+}
+
+
+filter {
+    # avoid noise if no entry in the list
+    if [message] == "[]" {
+        drop { }
+    }
+
+    if [http_request_failure] or [@metadata][code] != 200 {
+       mutate {
+       	   add_tag => [ "error" ]
+       }
+    }
+
+    if "dmaap_source" in [@metadata][request][tags] {
+        #
+        # Dmaap provides a json list, whose items are Strings containing the event
+        # provided to Dmaap, which itself is an escaped json.
+        #
+        # We first need to parse the json as we have to use the plaintext as it cannot
+        # work with list of events, then split that list into multiple string events,
+        # that we then transform into json.
+        #
+        json {
+            source => "[message]"
+            target => "message"
+        }
+
+        split {
+            field => "message"
+        }
+        json {
+            source => "message"
+        }
+        mutate {
+            remove_field => [ "message" ]
+        }
+    }
+
+    #
+    # Some timestamps are expressed as milliseconds, some are in microseconds
+    #
+    if [closedLoopAlarmStart] {
+        ruby {
+            code => "
+            if event.get('closedLoopAlarmStart').to_s.to_i(10) > 9999999999999
+              event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10) / 1000)
+            else
+              event.set('closedLoopAlarmStart', event.get('closedLoopAlarmStart').to_s.to_i(10))
+            end
+            "
+        }
+        date {
+            match => [ "closedLoopAlarmStart", UNIX_MS ]
+            target => "closedLoopAlarmStart"
+        }
+    }
+
+    if [closedLoopAlarmEnd] {
+        ruby {
+            code => "
+            if event.get('closedLoopAlarmEnd').to_s.to_i(10) > 9999999999999
+              event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10) / 1000)
+            else
+              event.set('closedLoopAlarmEnd', event.get('closedLoopAlarmEnd').to_s.to_i(10))
+            end
+            "
+        }
+        date {
+            match => [ "closedLoopAlarmEnd", UNIX_MS ]
+            target => "closedLoopAlarmEnd"
+        }
+
+    }
+
+
+    #
+    # Notification time are expressed under the form "yyyy-MM-dd HH:mm:ss", which
+    # is close to ISO8601, but lacks of T as spacer: "yyyy-MM-ddTHH:mm:ss"
+    #
+    if [notificationTime] {
+        mutate {
+            gsub => [
+                "notificationTime", " ", "T"
+                ]
+        }
+        date {
+            match => [ "notificationTime", ISO8601 ]
+            target => "notificationTime"
+        }
+    }
+
+
+    #
+    # Renaming some fields for readability
+    #
+        if [AAI][generic-vnf.vnf-name] {
+            mutate {
+                add_field => { "vnfName" => "%{[AAI][generic-vnf.vnf-name]}" }
+            }
+        }
+        if [AAI][generic-vnf.vnf-type] {
+            mutate {
+                add_field => { "vnfType" => "%{[AAI][generic-vnf.vnf-type]}" }
+            }
+        }
+        if [AAI][vserver.vserver-name] {
+            mutate {
+                add_field => { "vmName" => "%{[AAI][vserver.vserver-name]}" }
+            }
+        }
+        if [AAI][complex.city] {
+            mutate {
+                add_field => { "locationCity" => "%{[AAI][complex.city]}" }
+            }
+        }
+        if [AAI][complex.state] {
+            mutate {
+                add_field => { "locationState" => "%{[AAI][complex.state]}" }
+            }
+        }
+
+
+    #
+    # Adding some flags to ease aggregation
+    #
+    if [closedLoopEventStatus] =~ /(?i)ABATED/ {
+        mutate {
+            add_field => { "flagAbated" => "1" }
+        }
+    }
+    if [notification] =~ /^.*?(?:\b|_)FINAL(?:\b|_).*?(?:\b|_)FAILURE(?:\b|_).*?$/ {
+        mutate {
+            add_field => { "flagFinalFailure" => "1" }
+        }
+    }
+
+
+    if "error" not in [@metadata][request][tags]{
+        #
+        # Creating data for a secondary index
+        #
+        clone {
+            clones => [ "event-cl-aggs" ]
+            add_tag => [ "event-cl-aggs" ]
+        }
+        
+        if  "event-cl-aggs" in [@metadata][request][tags]{
+            #
+            # we only need a few fields for aggregations; remove all fields from clone except :
+            #   vmName,vnfName,vnfType,requestID,closedLoopAlarmStart, closedLoopControlName,closedLoopAlarmEnd,abated,nbrDmaapevents,finalFailure
+            #
+            prune {
+                whitelist_names => ["^@.*$","^topic$","^type$","^tags$","^flagFinalFailure$","^flagAbated$","^locationState$","^locationCity$","^vmName$","^vnfName$","^vnfType$","^requestID$","^closedLoopAlarmStart$","^closedLoopControlName$","^closedLoopAlarmEnd$","^target$","^target_type$","^triggerSourceName$","^policyScope$","^policyName$","^policyVersion$"]
+            }
+        
+        }
+    }
+}
+
+
+output {
+    stdout {
+        codec => rubydebug
+    }
+
+    if "error" in [tags] {
+        elasticsearch {
+            codec => "json"
+            hosts => ["${elasticsearch_base_url}"]
+            user => ["${logstash_user}"]
+            password => ["${logstash_pwd}"]
+            index => "errors-%{+YYYY.MM.DD}"
+            doc_as_upsert => true
+        }
+
+    } else if "event-cl-aggs" in [tags] {
+        elasticsearch {
+            codec => "json"
+            hosts => ["${elasticsearch_base_url}"]
+            user => ["${logstash_user}"]
+            password => ["${logstash_pwd}"]
+            document_id => "%{requestID}"
+            index => "events-cl-%{+YYYY.MM.DD}" # creates daily indexes for control loop
+            doc_as_upsert => true
+            action => "update"
+        }
+
+    } else {
+        elasticsearch {
+            codec => "json"
+            hosts => ["${elasticsearch_base_url}"]
+            user => ["${logstash_user}"]
+            password => ["${logstash_pwd}"]
+            index => "events-%{+YYYY.MM.DD}" # creates daily indexes
+            doc_as_upsert => true
+        }
+    }
+}
diff --git a/charts/clamp-dash-logstash/templates/configmap.yaml b/charts/clamp-dash-logstash/templates/configmap.yaml
new file mode 100644
index 0000000..350a0e0
--- /dev/null
+++ b/charts/clamp-dash-logstash/templates/configmap.yaml
@@ -0,0 +1,37 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+
+---
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}-aaf-keys
+  namespace: {{ include "common.namespace" . }}
+type: Opaque
+data:
+{{ tpl (.Files.Glob "resources/certs/*").AsSecrets . | indent 2 }}
diff --git a/charts/clamp-dash-logstash/templates/deployment.yaml b/charts/clamp-dash-logstash/templates/deployment.yaml
new file mode 100644
index 0000000..a72f6b6
--- /dev/null
+++ b/charts/clamp-dash-logstash/templates/deployment.yaml
@@ -0,0 +1,128 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - clamp-dash-es
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          env:
+          - name: dmaap_consumer_group
+            value: "{{ .Values.config.dmaapConsumerGroup }}"
+          - name: dmaap_consumer_id
+            value: "{{ .Values.config.dmaapConsumerId }}"
+          - name: event_topic
+            value: "{{ .Values.config.eventTopic }}"
+          - name: notification_topic
+            value: "{{ .Values.config.notificationTopic }}"
+          - name: request_topic
+            value: "{{ .Values.config.requestTopic }}"
+          - name: dmaap_base_url
+            value: {{ .Values.config.dmaapScheme }}://{{ .Values.config.dmaapHost }}.{{ include "common.namespace" . }}:{{ .Values.config.dmaapPort }}
+          - name: logstash_user
+            value: "{{ .Values.config.logstash_user }}"
+          - name: logstash_pwd
+            value: "{{ .Values.config.logstash_pwd }}"
+          - name: elasticsearch_base_url
+            value: "http://{{.Values.config.elasticsearchServiceName}}.{{.Release.Namespace}}.svc.cluster.local:{{.Values.config.elasticsearchPort}}"
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+            name: {{ include "common.servicename" . }}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+# disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /usr/share/logstash/config/logstash.yml
+            name: {{ include "common.fullname" . }}
+            subPath: logstash.yml
+          - mountPath: /usr/share/logstash/pipeline/logstash.conf
+            name: {{ include "common.fullname" . }}
+            subPath: pipeline.conf
+          - name: {{ include "common.fullname" . }}-aaf-certs
+            mountPath: /certs.d/
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+        - name: {{ include "common.fullname" . }}
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: logstash.yml
+              path: logstash.yml
+            - key: pipeline.conf
+              path: pipeline.conf
+        - name: {{ include "common.fullname" . }}-aaf-certs
+          secret:
+            secretName: {{ include "common.fullname" . }}-aaf-keys
+
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/charts/clamp-dash-logstash/templates/service.yaml b/charts/clamp-dash-logstash/templates/service.yaml
new file mode 100644
index 0000000..5c8b6ba
--- /dev/null
+++ b/charts/clamp-dash-logstash/templates/service.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.externalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.config.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.config.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/charts/clamp-dash-logstash/values.yaml b/charts/clamp-dash-logstash/values.yaml
new file mode 100644
index 0000000..20bf974
--- /dev/null
+++ b/charts/clamp-dash-logstash/values.yaml
@@ -0,0 +1,111 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  persistence: {}
+flavor: small
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-dashboard-logstash:4.1.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  elasticsearchServiceName: cdash-es
+  elasticsearchPort: 9200
+  dmaapHost: message-router
+  dmaapScheme: https
+  dmaapPort: 3905
+  dmaapConsumerGroup: "clampdashboard"
+  dmaapConsumerId: "clampdashboard"
+  eventTopic: "DCAE-CL-EVENT"
+  notificationTopic: "POLICY-CL-MGT"
+  requestTopic: "APPC-CL"
+  logstash_user: "logstash"
+  logstash_pwd: "logstash"
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  #Example service definition with external, internal and node ports.
+  #Services may use any combination of ports depending on the 'type' of
+  #service being defined.
+  type: ClusterIP
+  name: cdash-ls
+  portName: cdash-ls-healthcheck
+  externalPort: 9600
+  internalPort: 9600
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 1.3Gi
+    requests:
+      cpu: 10m
+      memory: 750Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 1.3Gi
+    requests:
+      cpu: 10m
+      memory: 750Mi
+  unlimited: {}
diff --git a/charts/mariadb/Chart.yaml b/charts/mariadb/Chart.yaml
new file mode 100644
index 0000000..ef12d23
--- /dev/null
+++ b/charts/mariadb/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: MariaDB Service
+name: mariadb
+version: 5.0.0
diff --git a/charts/mariadb/NOTES.txt b/charts/mariadb/NOTES.txt
new file mode 100644
index 0000000..1103aff
--- /dev/null
+++ b/charts/mariadb/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
new file mode 100644
index 0000000..612590c
--- /dev/null
+++ b/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf
@@ -0,0 +1,207 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# Example MySQL config file for medium systems.
+#
+# This is for a system with memory 8G where MySQL plays
+# an important part, or systems up to 128M where MySQL is used together with
+# other programs (such as a web server)
+#
+# In this file, you can use all long options that a program supports.
+# If you want to know which options a program supports, run the program
+# with the "--help" option.
+
+# The following options will be passed to all MySQL clients
+##[client]
+##user            = root
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+
+# Here follows entries for some specific programs
+
+# The MySQL server
+[mysqld]
+##performance_schema
+
+slow_query_log =ON
+long_query_time =2
+slow_query_log_file =//var/lib/mysql/slow_query.log
+##basedir         = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64
+##datadir         = //opt/app/mysql/data
+##port            = 3306
+##socket          = //opt/app/mysql/mysql.sock
+skip-external-locking
+explicit_defaults_for_timestamp = true
+skip-symbolic-links
+local-infile = 0
+#ignore_db_dir=lost+found
+key_buffer_size = 16M
+max_allowed_packet = 4M
+table_open_cache = 100
+sort_buffer_size = 512K
+net_buffer_length = 8K
+read_buffer_size = 256K
+read_rnd_buffer_size = 512K
+myisam_sort_buffer_size = 8M
+max_connections = 500
+lower_case_table_names = 1
+thread_stack = 256K
+thread_cache_size = 25
+query_cache_size = 8M
+query_cache_type = 0
+query_prealloc_size = 512K
+query_cache_limit = 1M
+
+# Password validation
+##plugin-load-add=simple_password_check.so
+##simple_password_check_other_characters=0
+
+# Audit Log settings
+plugin-load-add=server_audit.so
+server_audit=FORCE_PLUS_PERMANENT
+server_audit_file_path=//var/lib/mysql/audit.log
+server_audit_file_rotate_size=50M
+server_audit_events=CONNECT,QUERY,TABLE
+server_audit_logging=on
+
+# Don't listen on a TCP/IP port at all. This can be a security enhancement,
+# if all processes that need to connect to mysqld run on the same host.
+# All interaction with mysqld must be made via Unix sockets or named pipes.
+# Note that using this option without enabling named pipes on Windows
+# (via the "enable-named-pipe" option) will render mysqld useless!
+#
+#skip-networking
+
+# Replication Master Server (default)
+# binary logging is required for replication
+##log-bin=//var/lib/mysql/mysql-bin
+
+# binary logging format - mixed recommended
+binlog_format=row
+
+# required unique id between 1 and 2^32 - 1
+# defaults to 1 if master-host is not set
+# but will not function as a master if omitted
+
+# Replication Slave (comment out master section to use this)
+#
+# To configure this host as a replication slave, you can choose between
+# two methods :
+#
+# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
+#    the syntax is:
+#
+#    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
+#    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
+#
+#    where you replace <host>, <user>, <password> by quoted strings and
+#    <port> by the master's port number (3306 by default).
+#
+#    Example:
+#
+#    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
+#    MASTER_USER='joe', MASTER_PASSWORD='secret';
+#
+# OR
+#
+# 2) Set the variables below. However, in case you choose this method, then
+#    start replication for the first time (even unsuccessfully, for example
+#    if you mistyped the password in master-password and the slave fails to
+#    connect), the slave will create a master.info file, and any later
+#    change in this file to the variables' values below will be ignored and
+#    overridden by the content of the master.info file, unless you shutdown
+#    the slave server, delete master.info and restart the slaver server.
+#    For that reason, you may want to leave the lines below untouched
+#    (commented) and instead use CHANGE MASTER TO (see above)
+#
+# required unique id between 2 and 2^32 - 1
+# (and different from the master)
+# defaults to 2 if master-host is set
+# but will not function as a slave if omitted
+#server-id       = 2
+#
+# The replication master for this slave - required
+#master-host     =   <hostname>
+#
+# The username the slave will use for authentication when connecting
+# to the master - required
+#master-user     =   <username>
+#
+# The password the slave will authenticate with when connecting to
+# the master - required
+#master-password =   <password>
+#
+# The port the master is listening on.
+# optional - defaults to 3306
+#master-port     =  <port>
+#
+# binary logging - not required for slaves, but recommended
+#log-bin=mysql-bin
+
+# Uncomment the following if you are using InnoDB tables
+##innodb_data_home_dir = //opt/app/mysql/data
+##innodb_data_file_path = ibdata1:20M:autoextend:max:32G
+##innodb_log_group_home_dir = //opt/app/mysql/iblogs
+# You can set .._buffer_pool_size up to 50 - 80 %
+# of RAM but beware of setting memory usage too high
+innodb_buffer_pool_size = 128M
+#innodb_additional_mem_pool_size = 2M
+# Set .._log_file_size to 25 % of buffer pool size
+innodb_log_file_size = 10M
+innodb_log_files_in_group = 3
+innodb_log_buffer_size = 8M
+#innodb_flush_log_at_trx_commit = 1
+innodb_lock_wait_timeout = 50
+innodb_autoextend_increment = 100
+expire_logs_days = 8
+open_files_limit = 2000
+transaction-isolation=READ-COMMITTED
+####### Galera parameters #######
+## Galera Provider configuration
+wsrep_provider=/usr/lib/galera/libgalera_smm.so
+wsrep_provider_options="gcache.size=128M; gcache.page_size=10M"
+## Galera Cluster configuration
+wsrep_cluster_name="MSO-automated-tests-cluster"
+wsrep_cluster_address="gcomm://"
+#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3"
+##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186"
+## Galera Synchronization configuration
+wsrep_sst_method=rsync
+#wsrep_sst_method=xtrabackup-v2
+#wsrep_sst_auth="sstuser:Mon#2o!6"
+## Galera Node configuration
+wsrep_node_name="mariadb1"
+##wsrep_node_address="192.169.3.184"
+wsrep_on=OFF
+## Status notification
+#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify
+#######
+
+
+[mysqldump]
+quick
+max_allowed_packet = 16M
+
+[mysql]
+no-auto-rehash
+# Remove the next comment character if you are not familiar with SQL
+#safe-updates
+
+[myisamchk]
+key_buffer_size = 20971520
+
+##[mysqlhotcopy]
+##interactive-timeout
+##[mysqld_safe]
+##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1
+##log-error=//opt/app/mysql/log/mysqld.log
diff --git a/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bootstrap-database.sh b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bootstrap-database.sh
new file mode 100755
index 0000000..224a813
--- /dev/null
+++ b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bootstrap-database.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+
+###
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# 
+###
+
+mysql -uroot -p$MYSQL_ROOT_PASSWORD -f < /docker-entrypoint-initdb.d/bulkload/create-db.sql
+## New model creation 
+mysql -uroot -p$MYSQL_ROOT_PASSWORD -f cldsdb4 < /docker-entrypoint-initdb.d/bulkload/create-tables.sql
diff --git a/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-db.sql b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-db.sql
new file mode 100644
index 0000000..ea4d97c
--- /dev/null
+++ b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-db.sql
@@ -0,0 +1,11 @@
+#
+# Create CLDS database objects (tables, etc.)
+#
+#
+CREATE DATABASE `cldsdb4`;
+USE `cldsdb4`;
+DROP USER 'clds';
+CREATE USER 'clds';
+GRANT ALL on cldsdb4.* to 'clds' identified by 'sidnnd83K' with GRANT OPTION;
+FLUSH PRIVILEGES;
+
diff --git a/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql
new file mode 100644
index 0000000..0e15d4d
--- /dev/null
+++ b/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/create-tables.sql
@@ -0,0 +1,73 @@
+
+    create table hibernate_sequence (
+       next_val bigint
+    ) engine=InnoDB;
+
+    insert into hibernate_sequence values ( 1 );
+
+    create table loop_logs (
+       id bigint not null,
+        log_component varchar(255) not null,
+        log_instant datetime(6) not null,
+        log_type varchar(255) not null,
+        message MEDIUMTEXT not null,
+        loop_id varchar(255) not null,
+        primary key (id)
+    ) engine=InnoDB;
+
+    create table loops (
+       name varchar(255) not null,
+        blueprint_yaml MEDIUMTEXT not null,
+        dcae_blueprint_id varchar(255),
+        dcae_deployment_id varchar(255),
+        dcae_deployment_status_url varchar(255),
+        global_properties_json json,
+        last_computed_state varchar(255) not null,
+        model_properties_json json,
+        operational_policy_schema json,
+        svg_representation MEDIUMTEXT,
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table loops_microservicepolicies (
+       loop_id varchar(255) not null,
+        microservicepolicy_id varchar(255) not null,
+        primary key (loop_id, microservicepolicy_id)
+    ) engine=InnoDB;
+
+    create table micro_service_policies (
+       name varchar(255) not null,
+        json_representation json not null,
+        model_type varchar(255) not null,
+        policy_tosca MEDIUMTEXT not null,
+        properties json,
+        shared bit not null,
+        primary key (name)
+    ) engine=InnoDB;
+
+    create table operational_policies (
+       name varchar(255) not null,
+        configurations_json json,
+        loop_id varchar(255) not null,
+        primary key (name)
+    ) engine=InnoDB;
+
+    alter table loop_logs 
+       add constraint FK1j0cda46aickcaoxqoo34khg2 
+       foreign key (loop_id) 
+       references loops (name);
+
+    alter table loops_microservicepolicies 
+       add constraint FKem7tp1cdlpwe28av7ef91j1yl 
+       foreign key (microservicepolicy_id) 
+       references micro_service_policies (name);
+
+    alter table loops_microservicepolicies 
+       add constraint FKsvx91jekgdkfh34iaxtjfgebt 
+       foreign key (loop_id) 
+       references loops (name);
+
+    alter table operational_policies 
+       add constraint FK1ddoggk9ni2bnqighv6ecmuwu 
+       foreign key (loop_id) 
+       references loops (name);
diff --git a/charts/mariadb/templates/NOTES.txt b/charts/mariadb/templates/NOTES.txt
new file mode 100644
index 0000000..1103aff
--- /dev/null
+++ b/charts/mariadb/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/charts/mariadb/templates/configmap.yaml b/charts/mariadb/templates/configmap.yaml
new file mode 100644
index 0000000..8dd2f4e
--- /dev/null
+++ b/charts/mariadb/templates/configmap.yaml
@@ -0,0 +1,68 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#{{ if not .Values.disableClampClampMariadb }}
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-entrypoint-initdb-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-entrypoint-drop-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/drop/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-entrypoint-bulkload-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/bulkload/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: clamp-mariadb-conf-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }}
+#{{ end }}
diff --git a/charts/mariadb/templates/deployment.yaml b/charts/mariadb/templates/deployment.yaml
new file mode 100644
index 0000000..47d37bd
--- /dev/null
+++ b/charts/mariadb/templates/deployment.yaml
@@ -0,0 +1,109 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+        - name: {{ include "common.name" .  }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+            - name: MYSQL_ROOT_PASSWORD
+              valueFrom:
+                secretKeyRef:
+                  name: {{ template "common.fullname" . }}
+                  key: db-root-password
+          volumeMounts:
+          - mountPath: /docker-entrypoint-initdb.d/load-sql-files-tests-automation.sh
+            name: docker-entrypoint-initdb
+            subPath: load-sql-files-tests-automation.sh
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /docker-entrypoint-initdb.d/drop/
+            name: docker-entrypoint-clds-drop
+          - mountPath: /docker-entrypoint-initdb.d/bulkload/
+            name: docker-entrypoint-bulkload
+          - mountPath: /etc/mysql/conf.d/conf1/
+            name:  clamp-mariadb-conf
+          - mountPath: /var/lib/mysql
+            name: clamp-mariadb-data
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+      {{- if .Values.persistence.enabled }}
+        - name: clamp-mariadb-data
+          persistentVolumeClaim:
+            claimName: {{ include "common.fullname" . }}
+      {{- else }}
+          emptyDir: {}
+      {{- end }}
+        - name: docker-entrypoint-initdb
+          configMap:
+            name: clamp-entrypoint-initdb-configmap
+        - name: docker-entrypoint-clds-drop
+          configMap:
+            name: clamp-entrypoint-drop-configmap
+        - name: docker-entrypoint-bulkload
+          configMap:
+            name: clamp-entrypoint-bulkload-configmap
+        - name: clamp-mariadb-conf
+          configMap:
+            name: clamp-mariadb-conf-configmap
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/charts/mariadb/templates/pv.yaml b/charts/mariadb/templates/pv.yaml
new file mode 100644
index 0000000..252ca76
--- /dev/null
+++ b/charts/mariadb/templates/pv.yaml
@@ -0,0 +1,38 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolume
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+    name: {{ include "common.fullname" . }}
+spec:
+  capacity:
+    storage: {{ .Values.persistence.size}}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }}
+  hostPath:
+    path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ .Release.Name }}/{{ .Values.persistence.mountSubPath }}
+{{- end -}}
diff --git a/charts/mariadb/templates/pvc.yaml b/charts/mariadb/templates/pvc.yaml
new file mode 100644
index 0000000..1deed4e
--- /dev/null
+++ b/charts/mariadb/templates/pvc.yaml
@@ -0,0 +1,49 @@
+{{/*
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+*/}}
+
+{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}}
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
+    release: "{{ .Release.Name }}"
+    heritage: "{{ .Release.Service }}"
+{{- if .Values.persistence.annotations }}
+  annotations:
+{{ toYaml .Values.persistence.annotations | indent 4 }}
+{{- end }}
+spec:
+  selector:
+    matchLabels:
+      name: {{ include "common.fullname" . }}
+  accessModes:
+    - {{ .Values.persistence.accessMode }}
+  resources:
+    requests:
+      storage: {{ .Values.persistence.size }}
+{{- if .Values.persistence.storageClass }}
+{{- if (eq "-" .Values.persistence.storageClass) }}
+  storageClassName: ""
+{{- else }}
+  storageClassName: "{{ .Values.persistence.storageClass }}"
+{{- end }}
+{{- end }}
+{{- end -}}
diff --git a/charts/mariadb/templates/secrets.yaml b/charts/mariadb/templates/secrets.yaml
new file mode 100644
index 0000000..2ca864e
--- /dev/null
+++ b/charts/mariadb/templates/secrets.yaml
@@ -0,0 +1,28 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
+data:
+  db-root-password: {{ .Values.config.mysqlPassword | b64enc | quote }}
diff --git a/charts/mariadb/templates/service.yaml b/charts/mariadb/templates/service.yaml
new file mode 100644
index 0000000..5d9b191
--- /dev/null
+++ b/charts/mariadb/templates/service.yaml
@@ -0,0 +1,39 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+    {{- end}}
+      name: {{ .Values.service.portName }}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/charts/mariadb/values.yaml b/charts/mariadb/values.yaml
new file mode 100644
index 0000000..8bf6100
--- /dev/null
+++ b/charts/mariadb/values.yaml
@@ -0,0 +1,116 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018-2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+
+  persistence: {}
+
+# application image
+repository: nexus3.onap.org:10001
+image: mariadb:10.3.12
+pullPolicy: Always
+flavor: small
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+  mysqlPassword: strong_pitchou
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+## Persist data to a persitent volume
+persistence:
+  enabled: true
+
+  ## A manually managed Persistent Volume and Claim
+  ## Requires persistence.enabled: true
+  ## If defined, PVC must be created manually before volume will be bound
+  # existingClaim:
+  volumeReclaimPolicy: Retain
+
+  ## database data Persistent Volume Storage Class
+  ## If defined, storageClassName: <storageClass>
+  ## If set to "-", storageClassName: "", which disables dynamic provisioning
+  ## If undefined (the default) or set to null, no storageClassName spec is
+  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
+  ##   GKE, AWS & OpenStack)
+  ##
+  # storageClass: "-"
+  accessMode: ReadWriteOnce
+  size: 2Gi
+  mountPath: /dockerdata-nfs
+  mountSubPath: clamp/mariadb/data
+
+service:
+  type: ClusterIP
+  name: clampdb
+  portName: clampdb
+  internalPort: 3306
+  externalPort: 3306
+
+
+ingress:
+  enabled: false
+
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 200Mi
+  unlimited: {}
diff --git a/requirements.yaml b/requirements.yaml
new file mode 100644
index 0000000..05d49a8
--- /dev/null
+++ b/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    # local reference to common chart, as it is
+    # a part of this chart's package and will not
+    # be published independently to a repo (at this point)
+    repository: '@local'
diff --git a/resources/config/nginx.conf b/resources/config/nginx.conf
new file mode 100644
index 0000000..da7978a
--- /dev/null
+++ b/resources/config/nginx.conf
@@ -0,0 +1,25 @@
+server {
+
+  listen 443 default ssl;
+  ssl_protocols TLSv1.2;
+  ssl_certificate /etc/ssl/clamp.pem;
+  ssl_certificate_key /etc/ssl/clamp.key;
+  ssl_verify_client optional_no_ca;
+    location /restservices/clds/ {
+        proxy_pass https://clamp-backend:443;
+        proxy_set_header X-SSL-Cert $ssl_client_escaped_cert;
+    }
+
+  location / {
+    root   /usr/share/nginx/html;
+    index  index.html index.htm;
+    try_files $uri $uri/ /index.html;
+  }
+
+  error_page   500 502 503 504  /50x.html;
+
+  location = /50x.html {
+    root   /usr/share/nginx/html;
+  }
+
+}
diff --git a/templates/NOTES.txt b/templates/NOTES.txt
new file mode 100644
index 0000000..e36d6a5
--- /dev/null
+++ b/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit https://127.0.0.1:8443 to use your application"
+  kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/templates/configmap.yaml b/templates/configmap.yaml
new file mode 100644
index 0000000..9186cd9
--- /dev/null
+++ b/templates/configmap.yaml
@@ -0,0 +1,27 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
diff --git a/templates/deployment.yaml b/templates/deployment.yaml
new file mode 100644
index 0000000..9585e1f
--- /dev/null
+++ b/templates/deployment.yaml
@@ -0,0 +1,112 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - clamp-backend
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        # side car containers
+        - name: {{ include "common.name" . }}-filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-filebeat-conf
+            mountPath: /usr/share/filebeat/filebeat.yml
+            subPath: filebeat.yml
+          - name: {{ include "common.fullname" . }}-data-filebeat
+            mountPath: /usr/share/filebeat/data
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/nginx/
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/nginx/
+          - mountPath: /etc/nginx/conf.d/nginx.conf
+            name: {{ include "common.fullname" . }}-config
+            subPath: nginx.conf
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: nginx.conf
+              path: nginx.conf
+        - name: {{ include "common.fullname" . }}-filebeat-conf
+          configMap:
+            name: {{ .Release.Name }}-clamp-filebeat-configmap
+        - name: {{ include "common.fullname" . }}-data-filebeat
+          emptyDir: {}
+        - name:  {{ include "common.fullname" . }}-logs
+          emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/templates/service.yaml b/templates/service.yaml
new file mode 100644
index 0000000..3a08db0
--- /dev/null
+++ b/templates/service.yaml
@@ -0,0 +1,67 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+---
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ .Values.service.name2 }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type2 }}
+  ports:
+    {{if eq .Values.service.type2 "NodePort" -}}
+    - port: {{ .Values.service.internalPort2 }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort2 }}
+      targetPort: {{ .Values.service.internalPort2 }}
+      name: {{ .Values.config.portName2 }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
\ No newline at end of file
diff --git a/values.yaml b/values.yaml
new file mode 100644
index 0000000..92d4bb7
--- /dev/null
+++ b/values.yaml
@@ -0,0 +1,113 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018-2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+
+subChartsOnly:
+  enabled: true
+
+flavor: small
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-frontend:4.1.3
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+  log:
+    logstashServiceName: log-ls
+    logstashPort: 5044
+  dataRootDir: /dockerdata-nfs
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+
+service:
+  type: NodePort
+  name: clamp-external
+  portName: clamp-external
+  internalPort: 443
+  nodePort: 58
+
+  # as of 20180904 port 58 is reserved for clamp from log/logdemonode
+  # see https://wiki.onap.org/display/DW/OOM+NodePort+List
+
+  type2: ClusterIP
+  name2: clamp
+  portName2: clamp-internal
+  internalPort2: 443
+  externalPort2: 8443
+
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 200Mi
+    requests:
+      cpu: 10m
+      memory: 50Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 500Mi
+    requests:
+      cpu: 10m
+      memory: 50Mi
+  unlimited: {}