aboutsummaryrefslogtreecommitdiffstats
path: root/src/main/resources/application.properties
diff options
context:
space:
mode:
authorDeterme, Sebastien (sd378r) <sd378r@intl.att.com>2017-08-29 04:12:52 -0700
committerDeterme, Sebastien (sd378r) <sd378r@intl.att.com>2017-08-29 04:12:52 -0700
commitf527ac93d843bd545bd6637cb012378c75a62e65 (patch)
treea57e691f9247f445df2dd7901a4f091a843d5843 /src/main/resources/application.properties
parent0627eb6d8ef545725c7828a0e11a85788495982a (diff)
Add dynamic ports for HTTP/HTTPS
The ports can now be configured in the application.properties and the both protocols can run at the same time (HTTP+HTTPS) Change-Id: I57d1b5643df33da45af2f6798923d94bff1d560d Issue-Id: CLAMP-43 Signed-off-by: Determe, Sebastien (sd378r) <sd378r@intl.att.com>
Diffstat (limited to 'src/main/resources/application.properties')
-rw-r--r--src/main/resources/application.properties269
1 files changed, 151 insertions, 118 deletions
diff --git a/src/main/resources/application.properties b/src/main/resources/application.properties
index ce4158bb..9ed7c6ed 100644
--- a/src/main/resources/application.properties
+++ b/src/main/resources/application.properties
@@ -1,119 +1,152 @@
-###
-# ============LICENSE_START=======================================================
-# ONAP CLAMP
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights
-# reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END============================================
-# ===================================================================
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-###
-
-info.build.artifact=@project.artifactId@
-info.build.name=@project.name@
-info.build.description=@project.description@
-info.build.version=@project.version@
-
-
-server.contextPath=/
-#Modified engine-rest applicationpath
-spring.jersey.application-path=/engine-rest
-spring.profiles.active=clamp-default,clamp-spring-authentication
-spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
-
-#The max number of active threads in this pool
-server.tomcat.max-threads=200
-#The minimum number of threads always kept alive
-server.tomcat.min-Spare-Threads=25
-#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
-server.tomcat.max-idle-time=60000
-
-
-#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
-#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
-#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
-
-#Servlet context parameters
-server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
-
-camel.springboot.consumer-template-cache-size=1000
-camel.springboot.producer-template-cache-size=1000
-camel.springboot.jmx-enabled=true
-camel.defaultthreadpool.poolsize=10
-camel.defaultthreadpool.maxpoolsize=20
-camel.defaultthreadpool.maxqueuesize=1000
-camel.defaultthreadpool.keepaliveTime=60
-camel.defaultthreadpool.rejectpolicy=CallerRuns
-
-kubernetes.namespace=com-att-ajsc
-
-#server.port=0
-
-#Camunda Process Engine DataSource connection Details
-spring.datasource.camunda.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
-spring.datasource.camunda.username=camunda
-spring.datasource.camunda.password=ndMSpw4CAM
-spring.datasource.camunda.driverClassName=com.mysql.jdbc.Driver
-spring.datasource.camunda.validationQuery=SELECT 1
-spring.datasource.camunda.validationQueryTimeout=20000
-spring.datasource.camunda.validationInterval=60000
-spring.datasource.camunda.testWhileIdle = true
-# Automatically test whether a connection provided is good or not
-spring.datasource.camunda.testOnBorrow=true
-
-#Camunda application properties
-#Camunda history level
-camunda.bpm.history-level=auto
-
-#clds datasource connection details
-spring.datasource.cldsdb.driver-class-name=com.mysql.jdbc.Driver
-spring.datasource.cldsdb.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
-spring.datasource.cldsdb.username=clds
-spring.datasource.cldsdb.password=sidnnd83K
-spring.datasource.cldsdb.driverClassName=com.mysql.jdbc.Driver
-spring.datasource.cldsdb.validationQuery=SELECT 1
-spring.datasource.cldsdb.validationQueryTimeout=20000
-spring.datasource.cldsdb.validationInterval=60000
-spring.datasource.cldsdb.testWhileIdle = true
-# Automatically test whether a connection provided is good or not
-spring.datasource.cldsdb.testOnBorrow=true
-
-#Async Executor default Parameters
-async.core.pool.size=10
-async.max.pool.size=20
-async.queue.capacity=500
-
-org.onap.clamp.config.dcae.url=http://localhost:9000/closedloop-dcae-services
-
-#GRM Edge endpoint details
-service.name=ajsc6camundademo
-service.version=1.0.0.0
-routeoffer=TEST
-#Update with your application name
-application.name=AJSC6CAMUNDA
-
-org.onap.clamp.config.files.cldsReference=classpath:/clds/clds-reference.properties
-org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
-org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
-org.onap.clamp.config.files.globalClds=classpath:/clds/globalClds.properties
-
-#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
-CLDS_PERMISSION_TYPE_CL=permission-type-cl
-CLDS_PERMISSION_TYPE_CL_MANAGE=permission-type-cl-manage
-CLDS_PERMISSION_TYPE_CL_EVENT=permission-type-cl-event
-CLDS_PERMISSION_TYPE_FILTER_VF=permission-type-filter-vf
-CLDS_PERMISSION_TYPE_TEMPLATE=permission-type-template
-#This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
+###
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+# reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+###
+
+info.build.artifact=@project.artifactId@
+info.build.name=@project.name@
+info.build.description=@project.description@
+info.build.version=@project.version@
+
+### Set the port for HTTP or HTTPS protocol (Controlled by Spring framework, only one at a time).
+### (See below for the parameter 'server.http.port' if you want to have both enabled)
+### To have only HTTP, keep the lines server.ssl.* commented
+### To have only HTTPS enabled, uncomment the server.ssl.* lines and specify a right keystore location
+server.port=8080
+### Settings for HTTPS (this automatically enables the HTTPS on the port 'server.port')
+#server.ssl.key-store=file:/tmp/mykey.jks
+#server.ssl.key-store-password=pass
+#server.ssl.key-password=pass
+
+### In order to be user friendly when HTTPS is enabled,
+### you can add another HTTP port that will be automatically redirected to HTTPS
+### by enabling this parameter (server.http.port) and set it to another port (80 or 8080, 8090, etc ...)
+#server.http-to-https-redirection.port=8090
+
+### HTTP Example:
+###--------------
+### server.port=8080
+
+### HTTPS Example:
+### --------------
+### server.port=8443
+### server.ssl.key-store=file:/tmp/mykey.jks
+### server.ssl.key-store-password=mypass
+### server.ssl.key-password=mypass
+
+### HTTP (Redirected to HTTPS) and HTTPS Example:
+### --------------------------------------------
+### server.port=8443 <-- The HTTPS port
+### server.ssl.key-store=file:/tmp/mykey.jks
+### server.ssl.key-store-password=mypass
+### server.ssl.key-password=mypass
+### server.http-to-https-redirection.port=8090 <-- The HTTP port
+
+server.contextPath=/
+#Modified engine-rest applicationpath
+spring.jersey.application-path=/engine-rest
+spring.profiles.active=clamp-default,clamp-spring-authentication
+spring.autoconfigure.exclude=org.springframework.boot.autoconfigure.jdbc.DataSourceAutoConfiguration,org.springframework.boot.autoconfigure.orm.jpa.HibernateJpaAutoConfiguration
+
+#The max number of active threads in this pool
+server.tomcat.max-threads=200
+#The minimum number of threads always kept alive
+server.tomcat.min-Spare-Threads=25
+#The number of milliseconds before an idle thread shutsdown, unless the number of active threads are less or equal to minSpareThreads
+server.tomcat.max-idle-time=60000
+
+
+#Add this properties only if you want to change the URL, AJSC Framework interceptors will intercept
+#com.att.ajsc.common.interceptors.PreInterceptor.url=/**
+#com.att.ajsc.common.interceptors.PostInterceptor.url=/**
+
+#Servlet context parameters
+server.context_parameters.p-name=value #context parameter with p-name as key and value as value.
+
+camel.springboot.consumer-template-cache-size=1000
+camel.springboot.producer-template-cache-size=1000
+camel.springboot.jmx-enabled=true
+camel.defaultthreadpool.poolsize=10
+camel.defaultthreadpool.maxpoolsize=20
+camel.defaultthreadpool.maxqueuesize=1000
+camel.defaultthreadpool.keepaliveTime=60
+camel.defaultthreadpool.rejectpolicy=CallerRuns
+
+kubernetes.namespace=com-att-ajsc
+
+#server.port=0
+
+#Camunda Process Engine DataSource connection Details
+spring.datasource.camunda.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/camundabpm?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
+spring.datasource.camunda.username=camunda
+spring.datasource.camunda.password=ndMSpw4CAM
+spring.datasource.camunda.driverClassName=com.mysql.jdbc.Driver
+spring.datasource.camunda.validationQuery=SELECT 1
+spring.datasource.camunda.validationQueryTimeout=20000
+spring.datasource.camunda.validationInterval=60000
+spring.datasource.camunda.testWhileIdle = true
+# Automatically test whether a connection provided is good or not
+spring.datasource.camunda.testOnBorrow=true
+
+#Camunda application properties
+#Camunda history level
+camunda.bpm.history-level=auto
+
+#clds datasource connection details
+spring.datasource.cldsdb.driver-class-name=com.mysql.jdbc.Driver
+spring.datasource.cldsdb.url=jdbc:mysql://localhost:${docker.mariadb.port.host}/cldsdb4?verifyServerCertificate=false&useSSL=false&requireSSL=false&autoReconnect=true&maxReconnects=100
+spring.datasource.cldsdb.username=clds
+spring.datasource.cldsdb.password=sidnnd83K
+spring.datasource.cldsdb.driverClassName=com.mysql.jdbc.Driver
+spring.datasource.cldsdb.validationQuery=SELECT 1
+spring.datasource.cldsdb.validationQueryTimeout=20000
+spring.datasource.cldsdb.validationInterval=60000
+spring.datasource.cldsdb.testWhileIdle = true
+# Automatically test whether a connection provided is good or not
+spring.datasource.cldsdb.testOnBorrow=true
+
+#Async Executor default Parameters
+async.core.pool.size=10
+async.max.pool.size=20
+async.queue.capacity=500
+
+org.onap.clamp.config.dcae.url=http://localhost:9000/closedloop-dcae-services
+
+#GRM Edge endpoint details
+service.name=ajsc6camundademo
+service.version=1.0.0.0
+routeoffer=TEST
+#Update with your application name
+application.name=AJSC6CAMUNDA
+
+org.onap.clamp.config.files.cldsReference=classpath:/clds/clds-reference.properties
+org.onap.clamp.config.files.cldsPolicyConfig=classpath:/clds/clds-policy-config.properties
+org.onap.clamp.config.files.cldsUsers=classpath:/clds/clds-users.json
+org.onap.clamp.config.files.globalClds=classpath:/clds/globalClds.properties
+
+#Define user permission related parameters, the permission type can be changed but MUST be redefined in clds-users.properties in that case !
+CLDS_PERMISSION_TYPE_CL=permission-type-cl
+CLDS_PERMISSION_TYPE_CL_MANAGE=permission-type-cl-manage
+CLDS_PERMISSION_TYPE_CL_EVENT=permission-type-cl-event
+CLDS_PERMISSION_TYPE_FILTER_VF=permission-type-filter-vf
+CLDS_PERMISSION_TYPE_TEMPLATE=permission-type-template
+#This one indicates the type of instances (dev|prod|perf...), this must be set accordingly in clds-users.properties
CLDS_PERMISSION_INSTANCE=dev \ No newline at end of file