diff options
Diffstat (limited to 'pgaas/src/stage/opt/app/pgaas/main/postgresql.conf.orig')
| -rw-r--r-- | pgaas/src/stage/opt/app/pgaas/main/postgresql.conf.orig | 655 |
1 files changed, 0 insertions, 655 deletions
diff --git a/pgaas/src/stage/opt/app/pgaas/main/postgresql.conf.orig b/pgaas/src/stage/opt/app/pgaas/main/postgresql.conf.orig deleted file mode 100644 index cb4d13a..0000000 --- a/pgaas/src/stage/opt/app/pgaas/main/postgresql.conf.orig +++ /dev/null @@ -1,655 +0,0 @@ -# ----------------------------- -# PostgreSQL configuration file -# ----------------------------- -# -# This file consists of lines of the form: -# -# name = value -# -# (The "=" is optional.) Whitespace may be used. Comments are introduced with -# "#" anywhere on a line. The complete list of parameter names and allowed -# values can be found in the PostgreSQL documentation. -# -# The commented-out settings shown in this file represent the default values. -# Re-commenting a setting is NOT sufficient to revert it to the default value; -# you need to reload the server. -# -# This file is read on server startup and when the server receives a SIGHUP -# signal. If you edit the file on a running system, you have to SIGHUP the -# server for the changes to take effect, or use "pg_ctl reload". Some -# parameters, which are marked below, require a server shutdown and restart to -# take effect. -# -# Any parameter can also be given as a command-line option to the server, e.g., -# "postgres -c log_connections=on". Some parameters can be changed at run time -# with the "SET" SQL command. -# -# Memory units: kB = kilobytes Time units: ms = milliseconds -# MB = megabytes s = seconds -# GB = gigabytes min = minutes -# TB = terabytes h = hours -# d = days - - -#------------------------------------------------------------------------------ -# FILE LOCATIONS -#------------------------------------------------------------------------------ - -# The default values of these variables are driven from the -D command-line -# option or PGDATA environment variable, represented here as ConfigDir. - -data_directory = '/dbroot/pgdata/main' # for DCAE -#data_directory = 'ConfigDir' # use data in another directory - # (change requires restart) -hba_file = '%CFGDIR%/main/pg_hba.conf' # for DCAE -#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file - # (change requires restart) -ident_file = '%CFGDIR%/main/pg_ident.conf' # for DCAE -#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file - # (change requires restart) - -# If external_pid_file is not explicitly set, no extra PID file is written. -external_pid_file = '/var/run/postgresql/main.pid' # for DCAE -#external_pid_file = '' # write an extra PID file - # (change requires restart) - - -#------------------------------------------------------------------------------ -# CONNECTIONS AND AUTHENTICATION -#------------------------------------------------------------------------------ - -# - Connection Settings - - -# DCAE -- for 1607 IST30, set to '*' to allow remote connections -listen_addresses = '*' # for DCAE - -#listen_addresses = 'localhost' # what IP address(es) to listen on; - # comma-separated list of addresses; - # defaults to 'localhost'; use '*' for all - # (change requires restart) -#port = 5432 # (change requires restart) -#max_connections = 100 # (change requires restart) -# Note: Increasing max_connections costs ~400 bytes of shared memory per -# connection slot, plus lock space (see max_locks_per_transaction). -#superuser_reserved_connections = 3 # (change requires restart) -unix_socket_directories = '/var/run/postgresql,/tmp' # for DCAE -#unix_socket_directories = '/tmp' # comma-separated list of directories - # (change requires restart) -#unix_socket_group = '' # (change requires restart) -#unix_socket_permissions = 0777 # begin with 0 to use octal notation - # (change requires restart) -#bonjour = off # advertise server via Bonjour - # (change requires restart) -#bonjour_name = '' # defaults to the computer name - # (change requires restart) - -# - Security and Authentication - - -#authentication_timeout = 1min # 1s-600s -ssl = true # for DCAE -#ssl = off # (change requires restart) -#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers - # (change requires restart) -#ssl_prefer_server_ciphers = on # (change requires restart) -#ssl_ecdh_curve = 'prime256v1' # (change requires restart) -ssl_cert_file = '%CFGDIR%/lib/ssl-cert-snakeoil.pem' # for DCAE -#ssl_cert_file = 'server.crt' # (change requires restart) -ssl_key_file = '%CFGDIR%/lib/ssl-cert-snakeoil.key' # for DCAE -#ssl_key_file = 'server.key' # (change requires restart) -#ssl_ca_file = '' # (change requires restart) -#ssl_crl_file = '' # (change requires restart) -#password_encryption = on -#db_user_namespace = off -#row_security = on - -# GSSAPI using Kerberos -#krb_server_keyfile = '' -#krb_caseins_users = off - -# - TCP Keepalives - -# see "man 7 tcp" for details - -#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; - # 0 selects the system default -#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; - # 0 selects the system default -#tcp_keepalives_count = 0 # TCP_KEEPCNT; - # 0 selects the system default - - -#------------------------------------------------------------------------------ -# RESOURCE USAGE (except WAL) -#------------------------------------------------------------------------------ - -# - Memory - - -#shared_buffers = 32MB # min 128kB - # (change requires restart) -#huge_pages = try # on, off, or try - # (change requires restart) -#temp_buffers = 8MB # min 800kB -#max_prepared_transactions = 0 # zero disables the feature - # (change requires restart) -# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory -# per transaction slot, plus lock space (see max_locks_per_transaction). -# It is not advisable to set max_prepared_transactions nonzero unless you -# actively intend to use prepared transactions. -#work_mem = 4MB # min 64kB -#maintenance_work_mem = 64MB # min 1MB -#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem -#max_stack_depth = 2MB # min 100kB -#dynamic_shared_memory_type = posix # the default is the first option - # supported by the operating system: - # posix - # sysv - # windows - # mmap - # use none to disable dynamic shared memory - -# - Disk - - -#temp_file_limit = -1 # limits per-session temp file space - # in kB, or -1 for no limit - -# - Kernel Resource Usage - - -#max_files_per_process = 1000 # min 25 - # (change requires restart) -#shared_preload_libraries = '' # (change requires restart) - -# - Cost-Based Vacuum Delay - - -#vacuum_cost_delay = 0 # 0-100 milliseconds -#vacuum_cost_page_hit = 1 # 0-10000 credits -#vacuum_cost_page_miss = 10 # 0-10000 credits -#vacuum_cost_page_dirty = 20 # 0-10000 credits -#vacuum_cost_limit = 200 # 1-10000 credits - -# - Background Writer - - -#bgwriter_delay = 200ms # 10-10000ms between rounds -#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round -#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round - -# - Asynchronous Behavior - - -#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching -#max_worker_processes = 8 - - -#------------------------------------------------------------------------------ -# WRITE AHEAD LOG -#------------------------------------------------------------------------------ - -# - Settings - - -# TLH - this is where we do WAL settings -wal_level = hot_standby # minimal, archive, hot_standby, or logical - # (change requires restart) -#fsync = on # turns forced synchronization on or off -#synchronous_commit = on # synchronization level; - # off, local, remote_write, or on -#wal_sync_method = fsync # the default is the first option - # supported by the operating system: - # open_datasync - # fdatasync (default on Linux) - # fsync - # fsync_writethrough - # open_sync -#full_page_writes = on # recover from partial page writes -#wal_compression = off # enable compression of full-page writes -wal_log_hints = on # also do full page writes of non-critical updates - # (change requires restart) -#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers - # (change requires restart) -#wal_writer_delay = 200ms # 1-10000 milliseconds - -#commit_delay = 0 # range 0-100000, in microseconds -#commit_siblings = 5 # range 1-1000 - -# - Checkpoints - - -#checkpoint_timeout = 5min # range 30s-1h -#max_wal_size = 1GB -#min_wal_size = 80MB -#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0 -#checkpoint_warning = 30s # 0 disables - -# - Archiving - - -archive_mode = on # enables archiving; off, on, or always - # (change requires restart) -archive_command = 'test ! -f /dbroot/pglogs/main/%f && cp %p /dbroot/pglogs/main/%f' - # command to use to archive a logfile segment - # placeholders: %p = path of file to archive - # %f = file name only - # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' -archive_timeout = 0 # force a logfile segment switch after this - # number of seconds; 0 disables - - -#------------------------------------------------------------------------------ -# REPLICATION -#------------------------------------------------------------------------------ - -# - Sending Server(s) - - -# Set these on the master and on any standby that will send replication data. - -max_wal_senders = 4 # max number of walsender processes - # (change requires restart) -#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables -#wal_sender_timeout = 60s # in milliseconds; 0 disables - -max_replication_slots = 5 # max number of replication slots - # (change requires restart) - # DCAE NOTE: if we ever grow our cluster, change this value to - # the number of nodes + 1 -#track_commit_timestamp = off # collect timestamp of transaction commit - # (change requires restart) - -# - Master Server - - -# These settings are ignored on a standby server. - -#synchronous_standby_names = '' # standby servers that provide sync rep - # comma-separated list of application_name - # from standby(s); '*' = all -#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed - -# - Standby Servers - - -# These settings are ignored on a master server. - -hot_standby = on # "on" allows queries during recovery - # (change requires restart) -#max_standby_archive_delay = 30s # max delay before canceling queries - # when reading WAL from archive; - # -1 allows indefinite delay -#max_standby_streaming_delay = 30s # max delay before canceling queries - # when reading streaming WAL; - # -1 allows indefinite delay -#wal_receiver_status_interval = 10s # send replies at least this often - # 0 disables -#hot_standby_feedback = off # send info from standby to prevent - # query conflicts -#wal_receiver_timeout = 60s # time that receiver waits for - # communication from master - # in milliseconds; 0 disables -#wal_retrieve_retry_interval = 5s # time to wait before retrying to - # retrieve WAL after a failed attempt - - -#------------------------------------------------------------------------------ -# QUERY TUNING -#------------------------------------------------------------------------------ - -# - Planner Method Configuration - - -#enable_bitmapscan = on -#enable_hashagg = on -#enable_hashjoin = on -#enable_indexscan = on -#enable_indexonlyscan = on -#enable_material = on -#enable_mergejoin = on -#enable_nestloop = on -#enable_seqscan = on -#enable_sort = on -#enable_tidscan = on - -# - Planner Cost Constants - - -#seq_page_cost = 1.0 # measured on an arbitrary scale -#random_page_cost = 4.0 # same scale as above -#cpu_tuple_cost = 0.01 # same scale as above -#cpu_index_tuple_cost = 0.005 # same scale as above -#cpu_operator_cost = 0.0025 # same scale as above -#effective_cache_size = 4GB - -# - Genetic Query Optimizer - - -#geqo = on -#geqo_threshold = 12 -#geqo_effort = 5 # range 1-10 -#geqo_pool_size = 0 # selects default based on effort -#geqo_generations = 0 # selects default based on effort -#geqo_selection_bias = 2.0 # range 1.5-2.0 -#geqo_seed = 0.0 # range 0.0-1.0 - -# - Other Planner Options - - -#default_statistics_target = 100 # range 1-10000 -#constraint_exclusion = partition # on, off, or partition -#cursor_tuple_fraction = 0.1 # range 0.0-1.0 -#from_collapse_limit = 8 -#join_collapse_limit = 8 # 1 disables collapsing of explicit - # JOIN clauses - - -#------------------------------------------------------------------------------ -# ERROR REPORTING AND LOGGING -#------------------------------------------------------------------------------ - -# - Where to Log - - -#log_destination = 'stderr' # Valid values are combinations of - # stderr, csvlog, syslog, and eventlog, - # depending on platform. csvlog - # requires logging_collector to be on. - -# This is used when logging to stderr: -logging_collector = on # for DCAE -#logging_collector = off # Enable capturing of stderr and csvlog - # into log files. Required to be on for - # csvlogs. - # (change requires restart) - -# These are only used if logging_collector is on: -log_directory = '/opt/logs/dcae/postgresql/server' # for DCAE -#log_directory = 'pg_log' # directory where log files are written, - # can be absolute or relative to PGDATA -log_filename = 'error.log' # for DCAE -#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, - # can include strftime() escapes -log_file_mode = 0666 # for DCAE -#log_file_mode = 0600 # creation mode for log files, - # begin with 0 to use octal notation -#log_truncate_on_rotation = off # If on, an existing log file with the - # same name as the new log file will be - # truncated rather than appended to. - # But such truncation only occurs on - # time-driven rotation, not on restarts - # or size-driven rotation. Default is - # off, meaning append to existing files - # in all cases. -log_rotation_age = 1d # for DCAE -#log_rotation_age = 1d # Automatic rotation of logfiles will - # happen after that time. 0 disables. -log_rotation_size = 0 # for DCAE -#log_rotation_size = 10MB # Automatic rotation of logfiles will - # happen after that much log output. - # 0 disables. - -# These are relevant when logging to syslog: -#syslog_facility = 'LOCAL0' -#syslog_ident = 'postgres' - -# This is only relevant when logging to eventlog (win32): -#event_source = 'PostgreSQL' - -# - When to Log - - -#client_min_messages = notice # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # log - # notice - # warning - # error - -#log_min_messages = warning # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # info - # notice - # warning - # error - # log - # fatal - # panic - -#log_min_error_statement = error # values in order of decreasing detail: - # debug5 - # debug4 - # debug3 - # debug2 - # debug1 - # info - # notice - # warning - # error - # log - # fatal - # panic (effectively off) - -#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements - # and their durations, > 0 logs only - # statements running at least this number - # of milliseconds - - -# - What to Log - - -#debug_print_parse = off -#debug_print_rewritten = off -#debug_print_plan = off -#debug_pretty_print = on -#log_checkpoints = off -#log_connections = off -#log_disconnections = off -#log_duration = off -#log_error_verbosity = default # terse, default, or verbose messages -#log_hostname = off -log_line_prefix = '%t|%a|%u|%d|%i|%e|%r|%c|' # for DCAE -#log_line_prefix = '' # special values: - # %a = application name - # %u = user name - # %d = database name - # %r = remote host and port - # %h = remote host - # %p = process ID - # %t = timestamp without milliseconds - # %m = timestamp with milliseconds - # %i = command tag - # %e = SQL state - # %c = session ID - # %l = session line number - # %s = session start timestamp - # %v = virtual transaction ID - # %x = transaction ID (0 if none) - # %q = stop here in non-session - # processes - # %% = '%' - # e.g. '<%u%%%d> ' -#log_lock_waits = off # log lock waits >= deadlock_timeout -#log_statement = 'none' # none, ddl, mod, all -#log_replication_commands = off -#log_temp_files = -1 # log temporary files equal or larger - # than the specified size in kilobytes; - # -1 disables, 0 logs all temp files -#log_timezone = 'GMT' - - -# - Process Title - - -#cluster_name = '' # added to process titles if nonempty - # (change requires restart) -#update_process_title = on - - -#------------------------------------------------------------------------------ -# RUNTIME STATISTICS -#------------------------------------------------------------------------------ - -# - Query/Index Statistics Collector - - -#track_activities = on -#track_counts = on -#track_io_timing = off -#track_functions = none # none, pl, all -#track_activity_query_size = 1024 # (change requires restart) -#stats_temp_directory = 'pg_stat_tmp' - - -# - Statistics Monitoring - - -#log_parser_stats = off -#log_planner_stats = off -#log_executor_stats = off -#log_statement_stats = off - - -#------------------------------------------------------------------------------ -# AUTOVACUUM PARAMETERS -#------------------------------------------------------------------------------ - -#autovacuum = on # Enable autovacuum subprocess? 'on' - # requires track_counts to also be on. -#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and - # their durations, > 0 logs only - # actions running at least this number - # of milliseconds. -#autovacuum_max_workers = 3 # max number of autovacuum subprocesses - # (change requires restart) -#autovacuum_naptime = 1min # time between autovacuum runs -#autovacuum_vacuum_threshold = 50 # min number of row updates before - # vacuum -#autovacuum_analyze_threshold = 50 # min number of row updates before - # analyze -#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum -#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze -#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum - # (change requires restart) -#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age - # before forced vacuum - # (change requires restart) -#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for - # autovacuum, in milliseconds; - # -1 means use vacuum_cost_delay -#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for - # autovacuum, -1 means use - # vacuum_cost_limit - - -#------------------------------------------------------------------------------ -# CLIENT CONNECTION DEFAULTS -#------------------------------------------------------------------------------ - -# - Statement Behavior - - -#search_path = '"$user", public' # schema names -#default_tablespace = '' # a tablespace name, '' uses the default -#temp_tablespaces = '' # a list of tablespace names, '' uses - # only default tablespace -#check_function_bodies = on -#default_transaction_isolation = 'read committed' -#default_transaction_read_only = off -#default_transaction_deferrable = off -#session_replication_role = 'origin' -#statement_timeout = 0 # in milliseconds, 0 is disabled -#lock_timeout = 0 # in milliseconds, 0 is disabled -#vacuum_freeze_min_age = 50000000 -#vacuum_freeze_table_age = 150000000 -#vacuum_multixact_freeze_min_age = 5000000 -#vacuum_multixact_freeze_table_age = 150000000 -#bytea_output = 'hex' # hex, escape -#xmlbinary = 'base64' -#xmloption = 'content' -#gin_fuzzy_search_limit = 0 -#gin_pending_list_limit = 4MB - -# - Locale and Formatting - - -#datestyle = 'iso, mdy' -#intervalstyle = 'postgres' -#timezone = 'GMT' -#timezone_abbreviations = 'Default' # Select the set of available time zone - # abbreviations. Currently, there are - # Default - # Australia (historical usage) - # India - # You can create your own file in - # share/timezonesets/. -#extra_float_digits = 0 # min -15, max 3 -#client_encoding = sql_ascii # actually, defaults to database - # encoding - -# These settings are initialized by initdb, but they can be changed. -#lc_messages = 'C' # locale for system error message - # strings -#lc_monetary = 'C' # locale for monetary formatting -#lc_numeric = 'C' # locale for number formatting -#lc_time = 'C' # locale for time formatting - -# default configuration for text search -#default_text_search_config = 'pg_catalog.simple' - -# - Other Defaults - - -#dynamic_library_path = '$libdir' -#local_preload_libraries = '' -#session_preload_libraries = '' - - -#------------------------------------------------------------------------------ -# LOCK MANAGEMENT -#------------------------------------------------------------------------------ - -#deadlock_timeout = 1s -#max_locks_per_transaction = 64 # min 10 - # (change requires restart) -# Note: Each lock table slot uses ~270 bytes of shared memory, and there are -# max_locks_per_transaction * (max_connections + max_prepared_transactions) -# lock table slots. -#max_pred_locks_per_transaction = 64 # min 10 - # (change requires restart) - - -#------------------------------------------------------------------------------ -# VERSION/PLATFORM COMPATIBILITY -#------------------------------------------------------------------------------ - -# - Previous PostgreSQL Versions - - -#array_nulls = on -#backslash_quote = safe_encoding # on, off, or safe_encoding -#default_with_oids = off -#escape_string_warning = on -#lo_compat_privileges = off -#operator_precedence_warning = off -#quote_all_identifiers = off -#sql_inheritance = on -#standard_conforming_strings = on -#synchronize_seqscans = on - -# - Other Platforms and Clients - - -#transform_null_equals = off - - -#------------------------------------------------------------------------------ -# ERROR HANDLING -#------------------------------------------------------------------------------ - -#exit_on_error = off # terminate session on any error? -#restart_after_crash = on # reinitialize after backend crash? - - -#------------------------------------------------------------------------------ -# CONFIG FILE INCLUDES -#------------------------------------------------------------------------------ - -# These options allow settings to be loaded from files other than the -# default postgresql.conf. - -#include_dir = 'conf.d' # include files ending in '.conf' from - # directory 'conf.d' -#include_if_exists = 'exists.conf' # include file only if it exists -#include = 'special.conf' # include file - - -#------------------------------------------------------------------------------ -# CUSTOMIZED OPTIONS -#------------------------------------------------------------------------------ - -# Add settings for extensions here - -# repmgr / repmgrd -shared_preload_libraries = 'repmgr_funcs' |