path: root/netconf/restconf/restconf-nb-bierman02/src/test/resources/modules/restconf-module-testing-mount-point/ietf-yang-types.yang

 module ietf-yang-types {

   namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
   prefix "yang";

   organization
    "IETF NETMOD (NETCONF Data Modeling Language) Working Group";

   contact
    "WG Web:   <http://tools.ietf.org/wg/netmod/>
     WG List:  <mailto:netmod@ietf.org>

     WG Chair: David Partain
               <mailto:david.partain@ericsson.com>

     WG Chair: David Kessens
               <mailto:david.kessens@nsn.com>

     Editor:   Juergen Schoenwaelder
               <mailto:j.schoenwaelder@jacobs-university.de>";

   description
    "This module contains a collection of generally useful derived
     YANG data types.

     Copyright (c) 2010 IETF Trust and the persons identified as
     authors of the code.  All rights reserved.

     Redistribution and use in source and binary forms, with or without
     modification, is permitted pursuant to, and subject to the license
     terms contained in, the Simplified BSD License set forth in Section
     4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
     (http://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC 6021; see
     the RFC itself for full legal notices.";

   revision 2010-09-24 {
     description
      "Initial revision.";
     reference
      "RFC 6021: Common YANG Data Types";
   }

   /*** collection of counter and gauge types ***/

   typedef counter32 {
     type uint32;
     description
      "The counter32 type represents a non-negative integer
       that monotonically increases until it reaches a
       maximum value of 2^32-1 (4294967295 decimal), when it
       wraps around and starts increasing again from zero.

       Counters have no defined 'initial' value, and thus, a
       single value of a counter has (in general) no information
       content.  Discontinuities in the monotonically increasing
       value normally occur at re-initialization of the
       management system, and at other times as specified in the
       description of a schema node using this type.  If such
       other times can occur, for example, the creation of
       a schema node of type counter32 at times other than
       re-initialization, then a corresponding schema node
       should be defined, with an appropriate type, to indicate
       the last discontinuity.

       The counter32 type should not be used for configuration
       schema nodes.  A default statement SHOULD NOT be used in
       combination with the type counter32.

       In the value set and its semantics, this type is equivalent
       to the Counter32 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef zero-based-counter32 {
     type yang:counter32;
     default "0";
     description
      "The zero-based-counter32 type represents a counter32
       that has the defined 'initial' value zero.

       A schema node of this type will be set to zero (0) on creation
       and will thereafter increase monotonically until it reaches
       a maximum value of 2^32-1 (4294967295 decimal), when it
       wraps around and starts increasing again from zero.

       Provided that an application discovers a new schema node
       of this type within the minimum time to wrap, it can use the
       'initial' value as a delta.  It is important for a management
       station to be aware of this minimum time and the actual time
       between polls, and to discard data if the actual time is too
       long or there is no defined minimum time.

       In the value set and its semantics, this type is equivalent
       to the ZeroBasedCounter32 textual convention of the SMIv2.";
     reference
       "RFC 4502: Remote Network Monitoring Management Information
                  Base Version 2";
   }

   typedef counter64 {
     type uint64;
     description
      "The counter64 type represents a non-negative integer
       that monotonically increases until it reaches a
       maximum value of 2^64-1 (18446744073709551615 decimal),
       when it wraps around and starts increasing again from zero.

       Counters have no defined 'initial' value, and thus, a
       single value of a counter has (in general) no information
       content.  Discontinuities in the monotonically increasing
       value normally occur at re-initialization of the
       management system, and at other times as specified in the
       description of a schema node using this type.  If such
       other times can occur, for example, the creation of
       a schema node of type counter64 at times other than
       re-initialization, then a corresponding schema node
       should be defined, with an appropriate type, to indicate
       the last discontinuity.

       The counter64 type should not be used for configuration
       schema nodes.  A default statement SHOULD NOT be used in
       combination with the type counter64.

       In the value set and its semantics, this type is equivalent
       to the Counter64 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef zero-based-counter64 {
     type yang:counter64;
     default "0";
     description
      "The zero-based-counter64 type represents a counter64 that
       has the defined 'initial' value zero.

       A schema node of this type will be set to zero (0) on creation
       and will thereafter increase monotonically until it reaches
       a maximum value of 2^64-1 (18446744073709551615 decimal),
       when it wraps around and starts increasing again from zero.

       Provided that an application discovers a new schema node
       of this type within the minimum time to wrap, it can use the
       'initial' value as a delta.  It is important for a management
       station to be aware of this minimum time and the actual time
       between polls, and to discard data if the actual time is too
       long or there is no defined minimum time.

       In the value set and its semantics, this type is equivalent
       to the ZeroBasedCounter64 textual convention of the SMIv2.";
     reference
      "RFC 2856: Textual Conventions for Additional High Capacity
                 Data Types";
   }

   typedef gauge32 {
     type uint32;
     description
      "The gauge32 type represents a non-negative integer, which
       may increase or decrease, but shall never exceed a maximum
       value, nor fall below a minimum value.  The maximum value
       cannot be greater than 2^32-1 (4294967295 decimal), and
       the minimum value cannot be smaller than 0.  The value of
       a gauge32 has its maximum value whenever the information
       being modeled is greater than or equal to its maximum
       value, and has its minimum value whenever the information
       being modeled is smaller than or equal to its minimum value.
       If the information being modeled subsequently decreases
       below (increases above) the maximum (minimum) value, the
       gauge32 also decreases (increases).

       In the value set and its semantics, this type is equivalent
       to the Gauge32 type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef gauge64 {
     type uint64;
     description
      "The gauge64 type represents a non-negative integer, which
       may increase or decrease, but shall never exceed a maximum
       value, nor fall below a minimum value.  The maximum value
       cannot be greater than 2^64-1 (18446744073709551615), and
       the minimum value cannot be smaller than 0.  The value of
       a gauge64 has its maximum value whenever the information
       being modeled is greater than or equal to its maximum
       value, and has its minimum value whenever the information
       being modeled is smaller than or equal to its minimum value.
       If the information being modeled subsequently decreases
       below (increases above) the maximum (minimum) value, the
       gauge64 also decreases (increases).

       In the value set and its semantics, this type is equivalent
       to the CounterBasedGauge64 SMIv2 textual convention defined
       in RFC 2856";
     reference
      "RFC 2856: Textual Conventions for Additional High Capacity
                 Data Types";
   }

   /*** collection of identifier related types ***/

   typedef object-identifier {
     type string {
       pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
             + '(\.(0|([1-9]\d*)))*';
     }
     description
      "The object-identifier type represents administratively
       assigned names in a registration-hierarchical-name tree.

       Values of this type are denoted as a sequence of numerical
       non-negative sub-identifier values.  Each sub-identifier
       value MUST NOT exceed 2^32-1 (4294967295).  Sub-identifiers
       are separated by single dots and without any intermediate
       whitespace.

       The ASN.1 standard restricts the value space of the first
       sub-identifier to 0, 1, or 2.  Furthermore, the value space
       of the second sub-identifier is restricted to the range
       0 to 39 if the first sub-identifier is 0 or 1.  Finally,
       the ASN.1 standard requires that an object identifier
       has always at least two sub-identifier.  The pattern
       captures these restrictions.

       Although the number of sub-identifiers is not limited,
       module designers should realize that there may be
       implementations that stick with the SMIv2 limit of 128
       sub-identifiers.

       This type is a superset of the SMIv2 OBJECT IDENTIFIER type
       since it is not restricted to 128 sub-identifiers.  Hence,
       this type SHOULD NOT be used to represent the SMIv2 OBJECT
       IDENTIFIER type, the object-identifier-128 type SHOULD be
       used instead.";
     reference
      "ISO9834-1: Information technology -- Open Systems
       Interconnection -- Procedures for the operation of OSI
       Registration Authorities: General procedures and top
       arcs of the ASN.1 Object Identifier tree";
   }




   typedef object-identifier-128 {
     type object-identifier {
       pattern '\d*(\.\d*){1,127}';
     }
     description
      "This type represents object-identifiers restricted to 128
       sub-identifiers.

       In the value set and its semantics, this type is equivalent
       to the OBJECT IDENTIFIER type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

    typedef yang-identifier {
       type string {
         length "1..max";
         pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
         pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*';
       }
       description
         "A YANG identifier string as defined by the 'identifier'
          rule in Section 12 of RFC 6020.  An identifier must
          start with an alphabetic character or an underscore
          followed by an arbitrary sequence of alphabetic or
          numeric characters, underscores, hyphens, or dots.

          A YANG identifier MUST NOT start with any possible
          combination of the lowercase or uppercase character
          sequence 'xml'.";
       reference
         "RFC 6020: YANG - A Data Modeling Language for the Network
                    Configuration Protocol (NETCONF)";
     }

   /*** collection of date and time related types ***/

   typedef date-and-time {
     type string {
       pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
             + '(Z|[\+\-]\d{2}:\d{2})';
     }
     description
      "The date-and-time type is a profile of the ISO 8601
       standard for representation of dates and times using the
       Gregorian calendar.  The profile is defined by the
       date-time production in Section 5.6 of RFC 3339.

       The date-and-time type is compatible with the dateTime XML
       schema type with the following notable exceptions:

       (a) The date-and-time type does not allow negative years.

       (b) The date-and-time time-offset -00:00 indicates an unknown
           time zone (see RFC 3339) while -00:00 and +00:00 and Z all
           represent the same time zone in dateTime.

       (c) The canonical format (see below) of data-and-time values
           differs from the canonical format used by the dateTime XML
           schema type, which requires all times to be in UTC using the
           time-offset 'Z'.

       This type is not equivalent to the DateAndTime textual
       convention of the SMIv2 since RFC 3339 uses a different
       separator between full-date and full-time and provides
       higher resolution of time-secfrac.

       The canonical format for date-and-time values with a known time
       zone uses a numeric time zone offset that is calculated using
       the device's configured known offset to UTC time.  A change of
       the device's offset to UTC time will cause date-and-time values
       to change accordingly.  Such changes might happen periodically
       in case a server follows automatically daylight saving time
       (DST) time zone offset changes.  The canonical format for
       date-and-time values with an unknown time zone (usually referring
       to the notion of local time) uses the time-offset -00:00.";
     reference
      "RFC 3339: Date and Time on the Internet: Timestamps
       RFC 2579: Textual Conventions for SMIv2
       XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
   }

   typedef timeticks {
     type uint32;
     description
      "The timeticks type represents a non-negative integer that
       represents the time, modulo 2^32 (4294967296 decimal), in
       hundredths of a second between two epochs.  When a schema
       node is defined that uses this type, the description of
       the schema node identifies both of the reference epochs.

       In the value set and its semantics, this type is equivalent
       to the TimeTicks type of the SMIv2.";
     reference
      "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
   }

   typedef timestamp {
     type yang:timeticks;
     description
      "The timestamp type represents the value of an associated
       timeticks schema node at which a specific occurrence happened.
       The specific occurrence must be defined in the description
       of any schema node defined using this type.  When the specific
       occurrence occurred prior to the last time the associated
       timeticks attribute was zero, then the timestamp value is
       zero.  Note that this requires all timestamp values to be
       reset to zero when the value of the associated timeticks
       attribute reaches 497+ days and wraps around to zero.

       The associated timeticks schema node must be specified
       in the description of any schema node using this type.

       In the value set and its semantics, this type is equivalent
       to the TimeStamp textual convention of the SMIv2.";
     reference
      "RFC 2579: Textual Conventions for SMIv2";
   }

   /*** collection of generic address types ***/

   typedef phys-address {
     type string {
       pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
     }
     description
      "Represents media- or physical-level addresses represented
       as a sequence octets, each octet represented by two hexadecimal
       numbers.  Octets are separated by colons.  The canonical
       representation uses lowercase characters.

       In the value set and its semantics, this type is equivalent
       to the PhysAddress textual convention of the SMIv2.";
     reference
      "RFC 2579: Textual Conventions for SMIv2";
   }

   typedef mac-address {
     type string {
       pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
     }
     description
      "The mac-address type represents an IEEE 802 MAC address.
       The canonical representation uses lowercase characters.

       In the value set and its semantics, this type is equivalent
       to the MacAddress textual convention of the SMIv2.";
     reference
      "IEEE 802: IEEE Standard for Local and Metropolitan Area
                 Networks: Overview and Architecture
       RFC 2579: Textual Conventions for SMIv2";
   }

   /*** collection of XML specific types ***/

   typedef xpath1.0 {
     type string;
     description
      "This type represents an XPATH 1.0 expression.

       When a schema node is defined that uses this type, the
       description of the schema node MUST specify the XPath
       context in which the XPath expression is evaluated.";
     reference
      "XPATH: XML Path Language (XPath) Version 1.0";
   }

 }