diff options
Diffstat (limited to 'aai-resources/src/main/scripts')
| -rw-r--r-- | aai-resources/src/main/scripts/audit_schema.sh | 48 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/dataGrooming.sh | 134 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/dataRestoreFromSnapshot.sh | 88 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/dataSnapshot.sh | 54 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/deleteTool.sh | 56 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/deobfuscatePW.sh | 57 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/edgeTagger.sh | 96 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/forceDeleteTool.sh | 100 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/getTool.sh | 56 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/notifyTool.sh | 56 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/postTool.sh | 56 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/putTool.sh | 56 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/rshipTool.sh | 70 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/schemaMod.sh | 89 | ||||
| -rw-r--r-- | aai-resources/src/main/scripts/updateTool.sh | 56 |
15 files changed, 1072 insertions, 0 deletions
diff --git a/aai-resources/src/main/scripts/audit_schema.sh b/aai-resources/src/main/scripts/audit_schema.sh new file mode 100644 index 0000000..d402c1a --- /dev/null +++ b/aai-resources/src/main/scripts/audit_schema.sh @@ -0,0 +1,48 @@ +#!/bin/sh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +if [ -f "/etc/profile.d/aai.sh" ]; then + source /etc/profile.d/aai.sh +else + echo "File not found: /etc/profile.d/aai.sh"; + exit +fi + +JAVA=$JAVA_HOME/bin/java + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME -cp $CLASSPATH org.openecomp.aai.db.schema.ScriptDriver $@ diff --git a/aai-resources/src/main/scripts/dataGrooming.sh b/aai-resources/src/main/scripts/dataGrooming.sh new file mode 100644 index 0000000..d1df7b0 --- /dev/null +++ b/aai-resources/src/main/scripts/dataGrooming.sh @@ -0,0 +1,134 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes the dataGrooming java class to run some tests and generate a report and +# potentially do some auto-deleteing. +# +# Here are the allowed Parameters. Note - they are all optional and can be mixed and matched. +# +# -f oldFileName (see note below) +# -autoFix +# -sleepMinutes nn +# -edgesOnly +# -dontFixOrphans +# -maxFix +# -skipHostCheck +# -singleCommits +# -dupeCheckOff +# -dupeFixOn +# -ghost2CheckOff +# -ghost2FixOn +# +# NOTES: +# -f The name of a previous report can optionally be passed in with the "-f" option. +# Just the filename -- ie. "dataGrooming.sh -f dataGrooming.201504272106.out" +# The file will be assumed to be in the directory that it was created in. +# If a filename is passed, then the "deleteCandidate" vertex-id's and bad edges +# listed inside that report file will be deleted on this run if they are encountered as +# bad nodes/edges again. +# +# -autoFix If you don't use the "-f" option, you could choose to use "-autofix" which will +# automatically run the script twice: once to look for problems, then after +# sleeping for a few minutes, it will re-run with the inital-run's output as +# an input file. +# +# -maxFix When using autoFix, you might want to limit how many 'bad' records get fixed. +# This is a safeguard against accidently deleting too many records automatically. +# It has a default value set in AAIConstants: AAI_GROOMING_DEFAULT_MAX_FIX = 15; +# If there are more than maxFix candidates found -- then none will be deleted (ie. +# someone needs to look into it) +# +# -sleepMinutes When using autoFix, this defines how many minutes we sleep before the second run. +# It has a default value set in AAIConstants: AAI_GROOMING_DEFAULT_SLEEP_MINUTES = 7; +# The reason we sleep at all between runs is that our DB is "eventually consistant", so +# we want to give it time to resolve itself if possible. +# +# -edgesOnly Can be used any time you want to limit this tool so it only looks at edges. +# It runs much more quickly when it's just doing edges and sometimes all our +# problems are with bad edges so it can be nice to focus on edges only sometimes. +# +# -dontFixOrphans Since there can sometimes be a lot of orphan nodes, and they don't +# harm processing as much as phantom-nodes or bad-edges, it is useful to be +# able to ignore them when fixing things. +# +# -skipHostCheck By default, the grooming tool will check to see that it is running +# on the host that is the first one in the list found in: +# aaiconfig.properties aai.primary.filetransfer.serverlist +# This is so that when run from the cron, it only runs on one machine. +# This option lets you turn that checking off. +# +# -singleCommits By default, the grooming tool will do all of its processing and then do +# a commit of all the changes at once. This option (maybe could have been named better) +# is letting the user override the default behavior and do a commit for each +# individual 'remove" one by one as they are encountered by the grooming logic. +# NOTE - this only applies when using either the "-f" or "-autoFix" options since +# those are the only two that make changes to the database. +# +# -dupeCheckOff By default, we will check all of our nodes for duplicates. This parameter lets +# us turn this check off if we don't want to do it for some reason. +# +# -dupeFixOn When we're fixing data, by default we will NOT fix duplicates This parameter lets us turn +# that fixing ON when we are comfortable that it can pick the correct duplicate to preserve. +# +# -ghost2CheckOff By default, we will check for the "new" kind of ghost that we saw on +# Production in early February 2016. This parameter lets us turn this check off if we +# don't want to do it for some reason. +# +# -ghost2FixOn When we're fixing data, by default we will NOT try to fix the "new" ghost nodes. +# This parameter lets us turn that fixing ON if we want to try to fix them. +# + +echo +echo `date` " Starting $0" + + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/jetty/webapps/*/webapp/WEB-INF/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.DataGrooming "$@" + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/dataRestoreFromSnapshot.sh b/aai-resources/src/main/scripts/dataRestoreFromSnapshot.sh new file mode 100644 index 0000000..afe7256 --- /dev/null +++ b/aai-resources/src/main/scripts/dataRestoreFromSnapshot.sh @@ -0,0 +1,88 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# This script uses the dataSnapshot and SchemaGenerator (via GenTester) java classes to restore +# data to a database by doing three things: +# 1) clear out whatever data and schema are currently in the db +# 2) rebuild the schema (using the SchemaGenerator) +# 3) reload data from the passed-in datafile (which must found in the dataSnapShots directory and +# contain an xml view of the db data). +# + +echo +echo `date` " Starting $0" + + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + + +if [ "$#" -ne 1 ]; then + echo "Illegal number of parameters" + echo "usage: $0 previous_snapshot_filename" + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +#### Step 1) clear out the database +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.DataSnapshot CLEAR_ENTIRE_DATABASE $1 +if [ "$?" -ne "0" ]; then + echo "Problem clearing out database." + exit 1 +fi + +#### Step 2) rebuild the db-schema +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.GenTester GEN_DB_WITH_NO_DEFAULT_CR +if [ "$?" -ne "0" ]; then + echo "Problem rebuilding the schema (SchemaGenerator)." + exit 1 +fi + +#### Step 3) reload the data from a snapshot file +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.DataSnapshot RELOAD_DATA $1 +if [ "$?" -ne "0" ]; then + echo "Problem reloading data into the database." + exit 1 +fi + + + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/dataSnapshot.sh b/aai-resources/src/main/scripts/dataSnapshot.sh new file mode 100644 index 0000000..ef22eb6 --- /dev/null +++ b/aai-resources/src/main/scripts/dataSnapshot.sh @@ -0,0 +1,54 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# This script invokes the dataSnapshot java class passing an option to tell it to take +# a snapshot of the database and store it as a single-line XML file. +# + +echo +echo `date` " Starting $0" + + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.DataSnapshot JUST_TAKE_SNAPSHOT + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/deleteTool.sh b/aai-resources/src/main/scripts/deleteTool.sh new file mode 100644 index 0000000..585f333 --- /dev/null +++ b/aai-resources/src/main/scripts/deleteTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes Deletion java class to delete customer, subs, dvs-switch, service-capability or tenants +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.DeleteResource "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/deobfuscatePW.sh b/aai-resources/src/main/scripts/deobfuscatePW.sh new file mode 100644 index 0000000..965525d --- /dev/null +++ b/aai-resources/src/main/scripts/deobfuscatePW.sh @@ -0,0 +1,57 @@ +#!/bin/sh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes the utils.JettyObfuscationConversionCommandLineUtil class to +# deobfuscate an obfuscated name from aaiconfig property file +# e.g. +# ./deobfuscatePW.sh odl.auth.password +# will return: +# admin +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + -Dcom.att.eelf.logging.file=default-logback.xml -Dcom.att.eelf.logging.path="$PROJECT_HOME/bundleconfig/etc/appprops/" \ + org.openecomp.aai.util.AAIConfigCommandLinePropGetter $1 + +echo `date` " Done $0" diff --git a/aai-resources/src/main/scripts/edgeTagger.sh b/aai-resources/src/main/scripts/edgeTagger.sh new file mode 100644 index 0000000..5a120a2 --- /dev/null +++ b/aai-resources/src/main/scripts/edgeTagger.sh @@ -0,0 +1,96 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# This script is used to synch-up the data in the database with the "edge-tags" definitions found in the DbEdgeRules.java file. +# It is not needed during normal operation, but if a new tag (really a property) is defined for an edge or if an +# existing tag is changed, then this script should be run to migrate existing data so that it matches the new +# definition. Note: it is only dealing with the "tags" defined after position 2. For example, for our existing +# rules, we have have "isParent" defined in position 2, and then other tags in positions 3, 4 and 5 as +# mapped in DbEdgeRules.EdgeInfoMap: +# +# public static final Map<Integer, String> EdgeInfoMap; +# static { +# EdgeInfoMap = new HashMap<Integer, String>(); +# EdgeInfoMap.put(0, "edgeLabel"); +# EdgeInfoMap.put(1, "direction"); +# EdgeInfoMap.put(2, "isParent" ); +# EdgeInfoMap.put(3, "usesResource" ); +# EdgeInfoMap.put(4, "hasDelTarget" ); +# EdgeInfoMap.put(5, "SVC-INFRA" ); +# } +# +# -- The map above is used to interpret the data in the DbEdgeRules.EdgeRules map: +# +# public static final Multimap<String, String> EdgeRules = +# new ImmutableSetMultimap.Builder<String, String>() +# .putAll("availability-zone|complex","groupsResourcesIn,OUT,false,false,false,reverse") +# .putAll("availability-zone|service-capability","supportsServiceCapability,OUT,false,false,false,false") +# .putAll("complex|ctag-pool","hasCtagPool,OUT,true,false,false,false") +# .putAll("complex|l3-network","usesL3Network,OUT,false,false,false,true") +# etc... +# +# -- Valid values for the "tags" can be "true", "false" or "reverse". Read the T-space +# write-up for a detailed explanation of this... +# +# +# To use this script, You can either pass the parameter, "all" to update all the edge rules, or +# you can pass the KEY to a single edge rule that you would like to update. NOTE - the +# key is that first part of each edge rule that looks like, "nodeTypeA|nodeTypeB". +# +# Ie. ./edgeTagger.sh "all" +# or ./edgeTagger.sh "complex|ctag-pool" +# + +echo +echo `date` " Starting $0" + + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + -Dcom.att.eelf.logging.file=default-logback.xml -Dcom.att.eelf.logging.path="$PROJECT_HOME/bundleconfig/etc/appprops/" \ + org.openecomp.aai.dbgen.UpdateEdgeTags $1 +if [ "$?" -ne "0" ]; then + echo "Problem executing UpdateEdgeTags " + exit 1 +fi + + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/forceDeleteTool.sh b/aai-resources/src/main/scripts/forceDeleteTool.sh new file mode 100644 index 0000000..a9dd11b --- /dev/null +++ b/aai-resources/src/main/scripts/forceDeleteTool.sh @@ -0,0 +1,100 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# forceDeleteTool.sh -- This tool is used to delete nodes that cannot be deleted using +# the normal REST API because of internal DB problems. For example, Phantom nodes +# and duplicate nodes cause errors to happen in "normal" REST API codes and must +# be deleted using this tool. +# Since it is not using the "normal" REST logic, it is also not invoking the "normal" +# edge rules that we use to cascade deletes to "child" nodes. So - this tool can be dangerous. +# Ie. if you accidently delete a parent node (like a cloud-region) that has many dependent +# child nodes, there will be no way to get to any of those child-nodes after the cloud-region +# has been deleted. +# There are several environment variables defined in aaiconfig.properties to help minimize errors like that. +# aai.forceDel.protected.nt.list=cloud-region +# aai.forceDel.protected.edge.count=10 +# aai.forceDel.protected.descendant.count=10 +# +# Parameters: +# +# -action (required) valid values: COLLECT_DATA or DELETE_NODE or DELETE_EDGE +# -userId (required) must be followed by a userid +# -params4Collect (followed by a string to tell what properties/values to use +# as part of a COLLECT_DATA request. Must be in the format +# of “propertName|propValue” use commas to separate if there +# are more than one name/value being passed. +# -vertexId - required for a DELETE_NODE request +# -edgeId - required for a DELETE_EDGE request +# -overRideProtection --- WARNING – This over-rides the protections we introduced! +# It will let you override a protected vertex or vertex that has more +# than the allowed number of edges or descendants. +# -DISPLAY_ALL_VIDS (optional) - in the rare case when you want to see the +# vertex-ids (vids) of all the CONNECTED vertices, you can use this. By +# default, we do not show them. +# +# +# For example: +# +# forceDeleteTool.sh -action COLLECT_DATA -userId am8383 -params4Collect "tenant-id|junk tenant01 ID 0224" +# +# forceDeleteTool.sh -action COLLECT_DATA -userId am8383 -params4Collect "cloud-owner|junkTesterCloudOwner 0224,cloud-region-id|junkTesterCloud REgion ID 0224" +# +# forceDeleteTool.sh -action DELETE_NODE -userId am8383 -vertexId 1234567 +# +# forceDeleteTool.sh -action DELETE_EDGE -userId am8383 -edgeId 9876543 +# +# + + +echo +echo `date` " Starting $0" + +echo " NOTE - if you are deleting data, please run the dataSnapshot.sh script first or " +echo " at least make a note the details of the node that you are deleting. " + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.ForceDeleteTool "$@" + + +echo `date` " Done $0" + +exit 0 diff --git a/aai-resources/src/main/scripts/getTool.sh b/aai-resources/src/main/scripts/getTool.sh new file mode 100644 index 0000000..2da20eb --- /dev/null +++ b/aai-resources/src/main/scripts/getTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes GetResource java class to get all nodes +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.GetResource "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/notifyTool.sh b/aai-resources/src/main/scripts/notifyTool.sh new file mode 100644 index 0000000..2ecf1f4 --- /dev/null +++ b/aai-resources/src/main/scripts/notifyTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes PutActionsNotify java class to PUT a actions/notify request for a given JSON payload. +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.PutActionsNotify "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/postTool.sh b/aai-resources/src/main/scripts/postTool.sh new file mode 100644 index 0000000..a773915 --- /dev/null +++ b/aai-resources/src/main/scripts/postTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes PostResource java class to POST on a resource +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.PostResource "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/putTool.sh b/aai-resources/src/main/scripts/putTool.sh new file mode 100644 index 0000000..9d3f1dd --- /dev/null +++ b/aai-resources/src/main/scripts/putTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes PutResource java class to PUT on a resource +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.PutResource "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/rshipTool.sh b/aai-resources/src/main/scripts/rshipTool.sh new file mode 100644 index 0000000..316d0f5 --- /dev/null +++ b/aai-resources/src/main/scripts/rshipTool.sh @@ -0,0 +1,70 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes RelationshipputDel java class to PUT/DELETE a relationship +# +# sample json file for an oam-network node to put a relationship to a complex +#{ +# "related-to": "complex", +# "relationship-data": [ { +# "relationship-key": "complex.physical-location-id", +# "relationship-value": "CHCGILCL73W" +# }] +#} +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/jetty/webapps/*/webapp/WEB-INF/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.RelationshipPutDel "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/schemaMod.sh b/aai-resources/src/main/scripts/schemaMod.sh new file mode 100644 index 0000000..f4fd4d5 --- /dev/null +++ b/aai-resources/src/main/scripts/schemaMod.sh @@ -0,0 +1,89 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# This script is used to correct mistakes made in the database schema. +# It currently just allows you to change either the dataType and/or indexType on properties used by nodes. +# +# NOTE - Titan is not elegant in 0.5.3 about making changes to the schema. Bad properties never +# actually leave the database, they just get renamed and stop getting used. So it is +# really worthwhile to get indexes and dataTypes correct the first time around. +# Note also - This script just makes changes to the schema that is currently live. +# If you were to create a new schema in a brandy-new environment, it would look like +# whatever ex5.json (as of June 2015) told it to look like. So, part of making a +# change to the db schema should Always first be to make the change in ex5.json so that +# future environments will have the change. This script is just to change existing +# instances of the schema since schemaGenerator (as of June 2015) does not update things - it +# just does the initial creation. +# +# Boy, this is getting to be a big comment section... +# +# To use this script, you need to pass four parameters: +# propertyName -- the name of the property that you need to change either the index or dataType on +# targetDataType -- whether it's changing or not, you need to give it: String, Integer, Boolean or Long +# targetIndexInfo -- whether it's changing or not, you need to give it: index, noIndex or uniqueIndex +# preserveDataFlag -- true or false. The only reason I can think of why you'd ever want to +# set this to false would be maybe if you were changing to an incompatible dataType so didn't +# want it to try to use the old data (and fail). But 99% of the time this will just be 'true'. +# +# Ie. schemaMod flavor-id String index true +# + +echo +echo `date` " Starting $0" + + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + + +if [ "$#" -ne 4 ]; then + echo "Illegal number of parameters" + echo "usage: $0 propertyName targetDataType targetIndexInfo preserveDataFlag" + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME \ + org.openecomp.aai.dbgen.SchemaMod $1 $2 $3 $4 +if [ "$?" -ne "0" ]; then + echo "Problem executing schemaMod " + exit 1 +fi + + +echo `date` " Done $0" +exit 0 diff --git a/aai-resources/src/main/scripts/updateTool.sh b/aai-resources/src/main/scripts/updateTool.sh new file mode 100644 index 0000000..25670f6 --- /dev/null +++ b/aai-resources/src/main/scripts/updateTool.sh @@ -0,0 +1,56 @@ +#!/bin/ksh + +### +# ============LICENSE_START======================================================= +# org.openecomp.aai +# ================================================================================ +# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +### + +# +# The script invokes GetResource java class to get all nodes +# + +echo +echo `date` " Starting $0" + +userid=$( id | cut -f2 -d"(" | cut -f1 -d")" ) +if [ "${userid}" != "aaiadmin" ]; then + echo "You must be aaiadmin to run $0. The id used $userid." + exit 1 +fi + +. /etc/profile.d/aai.sh + +for JAR in `ls $PROJECT_HOME/extJars/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +for JAR in `ls $PROJECT_HOME/lib/*.jar` +do + CLASSPATH=$CLASSPATH:$JAR +done + +$JAVA_HOME/bin/java -classpath $CLASSPATH -Dhttps.protocols=TLSv1.1,TLSv1.2 -DAJSC_HOME=$PROJECT_HOME -Daai.home=$PROJECT_HOME org.openecomp.aai.util.UpdateResource "$@" +ret_code=$? +if [ $ret_code != 0 ]; then + echo `date` " Done $0" + exit $ret_code +fi + +echo `date` " Done $0" +exit 0 |