5 files changed, 288 insertions, 0 deletions
diff --git a/charts/gizmo/templates/NOTES.txt b/charts/gizmo/templates/NOTES.txt
new file mode 100644
index 0000000..24371d0
--- /dev/null
+++ b/charts/gizmo/templates/NOTES.txt
@@ -0,0 +1,19 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/charts/gizmo/templates/configmap.yaml b/charts/gizmo/templates/configmap.yaml
new file mode 100644
index 0000000..b988d31
--- /dev/null
+++ b/charts/gizmo/templates/configmap.yaml
@@ -0,0 +1,45 @@
+# Copyright © 2018 Amdocs, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-model-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/model/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-log-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/*").AsConfig . | indent 2 }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}-filebeat-configmap
+  namespace: {{ include "common.namespace" . }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
+\ No newline at end of file
diff --git a/charts/gizmo/templates/deployment.yaml b/charts/gizmo/templates/deployment.yaml
new file mode 100644
index 0000000..768c28b
--- /dev/null
+++ b/charts/gizmo/templates/deployment.yaml
@@ -0,0 +1,143 @@
+# Copyright © 2018 Amdocs, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      containers:
+        - name: {{ .Chart.Name }}
+          image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          env:
+            - name: CONFIG_HOME
+              value: /opt/app/crud-service/config/
+            - name: KEY_STORE_PASSWORD
+              valueFrom:
+                secretKeyRef:
+                  name: {{ template "common.fullname" . }}-pass
+                  key: KEY_STORE_PASSWORD
+            - name: KEY_MANAGER_PASSWORD
+              valueFrom:
+                secretKeyRef:
+                  name: {{ template "common.fullname" . }}-pass
+                  key: KEY_MANAGER_PASSWORD
+            - name: SERVICE_BEANS
+              value: /opt/app/crud-service/dynamic/conf
+          volumeMounts:
+          - mountPath: /etc/localtime
+            name: localtime
+            readOnly: true
+          - mountPath: /opt/app/crud-service/config/crud-api.properties
+            subPath: crud-api.properties
+            name: {{ include "common.fullname" . }}-config
+          - mountPath: /opt/app/crud-service/config/model/
+            name: {{ include "common.fullname" . }}-model-config
+          - mountPath: /opt/app/crud-service/config/auth
+            name: {{ include "common.fullname" . }}-auth-secret
+          - mountPath: /opt/app/crud-service/dynamic/conf/crud-beans.xml
+            name: {{ include "common.fullname" . }}-config
+            subPath: crud-beans.xml
+          - mountPath: /var/log/onap
+            name: {{ include "common.fullname" . }}-logs
+          - mountPath: /opt/app/crud-api/bundleconfig/etc/logback.xml
+            name: {{ include "common.fullname" . }}-logback-config
+            subPath: logback.xml
+          resources:
+{{ toYaml .Values.resources | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+
+        - name: filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - mountPath: /usr/share/filebeat/filebeat.yml
+            name: filebeat-conf
+            subPath: filebeat.yml
+          - mountPath: /var/log/onap
+            name: {{ include "common.fullname" . }}-logs
+          - mountPath: /usr/share/filebeat/data
+            name: {{ include "common.fullname" . }}-data-filebeat
+
+      volumes:
+        - name: localtime
+          hostPath:
+            path: /etc/localtime
+            readOnly: true
+        - name: {{ include "common.fullname" . }}-data-filebeat
+          emptyDir: {}
+        - name: filebeat-conf
+          configMap:
+            name: {{ include "common.fullname" . }}-filebeat-configmap
+        - name: {{ include "common.fullname" . }}-logs
+          emptyDir: {}
+        - name: {{ include "common.fullname" . }}-auth-secret
+          secret:
+            secretName: {{ include "common.fullname" . }}-auth
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}-configmap
+            items:
+            - key: crud-api.properties
+              path: crud-api.properties
+            - key: crud-beans.xml
+              path: crud-beans.xml
+        - name: {{ include "common.fullname" . }}-logback-config
+          configMap:
+            name: {{ include "common.fullname" . }}-log-configmap
+            items:
+            - key: logback.xml
+              path: logback.xml
+        - name: {{ include "common.fullname" . }}-model-config
+          configMap:
+            name: {{ include "common.fullname" . }}-model-configmap
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
+\ No newline at end of file
diff --git a/charts/gizmo/templates/secrets.yaml b/charts/gizmo/templates/secrets.yaml
new file mode 100644
index 0000000..f5d8ec8
--- /dev/null
+++ b/charts/gizmo/templates/secrets.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2018 Amdocs, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}-auth
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ (.Files.Glob "resources/config/auth/*").AsSecrets | indent 2 }}
+---
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ include "common.fullname" . }}-pass
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+type: Opaque
+data:
+  KEY_STORE_PASSWORD: {{ .Values.config.keyStorePassword | b64enc | quote }}
+  KEY_MANAGER_PASSWORD: {{ .Values.config.keyManagerPassword | b64enc | quote }}
+\ No newline at end of file
diff --git a/charts/gizmo/templates/service.yaml b/charts/gizmo/templates/service.yaml
new file mode 100644
index 0000000..f88a4e9
--- /dev/null
+++ b/charts/gizmo/templates/service.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2018 Amdocs, AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+  annotations:
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default "302" }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.name }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.name }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
+\ No newline at end of file