path: root/ice_validator/tests/conftest.py

# -*- coding: utf8 -*-
# ============LICENSE_START=======================================================
# org.onap.vvp/validation-scripts
# ===================================================================
# Copyright © 2018 AT&T Intellectual Property. All rights reserved.
# ===================================================================
#
# Unless otherwise specified, all software contained herein is licensed
# under the Apache License, Version 2.0 (the "License");
# you may not use this software except in compliance with the License.
# You may obtain a copy of the License at
#
#             http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
#
#
# Unless otherwise specified, all documentation contained herein is licensed
# under the Creative Commons License, Attribution 4.0 Intl. (the "License");
# you may not use this documentation except in compliance with the License.
# You may obtain a copy of the License at
#
#             https://creativecommons.org/licenses/by/4.0/
#
# Unless required by applicable law or agreed to in writing, documentation
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# ============LICENSE_END============================================

import collections
import csv
import datetime
import hashlib
import io
import json
import os
import sys
import time
import requests
import traceback

import docutils.core
import jinja2
import pytest
from more_itertools import partition
from six import string_types
import xlsxwriter

__path__ = [os.path.dirname(os.path.abspath(__file__))]

resolution_steps_file = "resolution_steps.json"
heat_requirements_file = "heat_requirements.json"

report_columns = [
    ("Input File", "file"),
    ("Test", "test_file"),
    ("Requirements", "req_description"),
    ("Resolution Steps", "resolution_steps"),
    ("Error Message", "message"),
    ("Raw Test Output", "raw_output"),
]
report = collections.OrderedDict(report_columns)

COLLECTION_FAILURES = []
COLLECTION_FAILURE_WARNING = """WARNING: The following unexpected errors occurred
while preparing to validate the the input files. Some validations may not have been
executed. Please refer these issue to the VNF Validation Tool team.
"""


def extract_error_msg(rep):
    try:
        msg = str(rep.longrepr.reprcrash)
    except AttributeError:
        msg = str(rep)

    if "AssertionError:" in msg:
        return msg.split("AssertionError:")[1]
    else:
        return msg


@pytest.hookimpl(tryfirst=True, hookwrapper=True)
def pytest_runtest_makereport(item, call):

    outcome = yield
    rep = outcome.get_result()

    output_dir = "{}/../output".format(__path__[0])
    if rep.outcome == "failed":
        if not os.path.exists(output_dir):
            os.mkdir(output_dir)
        if os.path.exists("{}/failures".format(output_dir)):
            with open("{}/failures".format(output_dir), "r") as o:
                jdata = json.loads(o.read())
        else:
            jdata = {}

        if hasattr(item.function, "requirement_ids"):
            requirement_ids = item.function.requirement_ids
        else:
            requirement_ids = ""

        if "environment_pair" in item.fixturenames:
            resolved_pair = "{} environment pair".format(
                item.funcargs["environment_pair"]["name"]
            )
        elif "heat_volume_pair" in item.fixturenames:
            resolved_pair = "{} volume pair".format(
                item.funcargs["heat_volume_pair"]["name"]
            )
        elif "heat_templates" in item.fixturenames:
            resolved_pair = item.funcargs["heat_templates"]
        elif "yaml_files" in item.fixturenames:
            resolved_pair = item.funcargs["yaml_files"]
        else:
            resolved_pair = rep.nodeid.split("[")[1][:-1]

        markers = set(m.name for m in item.iter_markers())
        base_test = "base" in markers

        msg = extract_error_msg(rep)
        if base_test:
            msg = "!!Base Test Failure!! Halting test suite execution...\n{}".format(
                msg
            )

        jdata[len(jdata)] = {
            "file": resolved_pair,
            "vnfrqts": requirement_ids,
            "test": item.function.__name__,
            "test_file": item.function.__module__.split(".")[-1],
            "raw_output": str(rep.longrepr),
            "message": msg,
        }

        with open("{}/failures".format(output_dir), "w") as f:
            json.dump(jdata, f, indent=4)

        if not item.config.option.continue_on_failure and base_test:
            pytest.exit(
                "{}\n{}\n{}".format(msg, resolved_pair, item.function.__name__)
            )


def make_timestamp():
    timezone = time.tzname[time.localtime().tm_isdst]
    return "{} {}".format(str(datetime.datetime.now()), timezone)


def pytest_sessionfinish(session, exitstatus):
    if not session.config.option.template_dir:
        return
    template_path = os.path.abspath(session.config.option.template_dir[0])
    profile_name = session.config.option.validation_profile_name
    generate_report(
        "{}/../output".format(__path__[0]),
        template_path,
        profile_name,
        session.config.option.report_format,
    )


def pytest_collection_modifyitems(session, config, items):
    allowed_marks = ["xfail", "base"]
    profile = config.option.validation_profile

    for item in items:
        markers = set(m.name for m in item.iter_markers())
        if not profile and markers and set(markers).isdisjoint(allowed_marks):
            item.add_marker(
                pytest.mark.skip(
                    reason="No validation profile selected. Skipping tests with marks."
                )
            )
        if (
            profile
            and markers
            and profile not in markers
            and set(markers).isdisjoint(allowed_marks)
        ):
            item.add_marker(
                pytest.mark.skip(reason="Doesn't match selection validation profile")
            )

    items.sort(
        key=lambda item: 0 if "base" in set(m.name for m in item.iter_markers()) else 1
    )


def make_href(path):
    paths = [path] if isinstance(path, string_types) else path
    links = []
    for p in paths:
        abs_path = os.path.abspath(p)
        name = abs_path if os.path.isdir(abs_path) else os.path.split(abs_path)[1]
        links.append(
            "<a href='file://{abs_path}' target='_blank'>{name}</a>".format(
                abs_path=abs_path, name=name
            )
        )
    return "<br/>".join(links)


def generate_report(outpath, template_path, profile_name, output_format):
    failures = "{}/failures".format(outpath)
    faildata = None
    rdata = None
    hdata = None

    if os.path.exists(failures):
        with open(failures, "r") as f:
            faildata = json.loads(f.read())
    else:
        faildata = {}

    resolution_steps = "{}/../{}".format(__path__[0], resolution_steps_file)
    if os.path.exists(resolution_steps):
        with open(resolution_steps, "r") as f:
            rdata = json.loads(f.read())

    heat_requirements = "{}/../{}".format(__path__[0], heat_requirements_file)
    if os.path.exists(heat_requirements):
        with open(heat_requirements, "r") as f:
            hdata = json.loads(f.read())

    # point requirements at the most recent version
    current_version = hdata["current_version"]
    hdata = hdata["versions"][current_version]["needs"]
    # mapping requirement IDs from failures to requirement descriptions
    for k, v in faildata.items():
        req_text = ""
        if v["vnfrqts"] != "":
            for req in v["vnfrqts"]:
                if req in hdata:
                    req_text += "\n\n{}: \n{}".format(req, hdata[req]["description"])
        faildata[k]["req_description"] = req_text

    # mapping resolution steps to module and test name
    for k, v in faildata.items():
        # resolution_step = ""
        faildata[k]["resolution_steps"] = ""
        for rs in rdata:
            if v["test_file"] == rs["module"] and v["test"] == rs["function"]:
                faildata[k]["resolution_steps"] = "\n{}: \n{}".format(
                    rs["header"], rs["resolution_steps"]
                )
    output_format = output_format.lower().strip() if output_format else "html"
    if output_format == "html":
        generate_html_report(outpath, profile_name, template_path, faildata)
    elif output_format == "excel":
        generate_excel_report(outpath, profile_name, template_path, faildata)
    elif output_format == "csv":
        generate_csv_report(outpath, profile_name, template_path, faildata)
    else:
        raise ValueError("Unsupported output format: " + output_format)


def generate_csv_report(output_dir, profile_name, template_path, faildata):
    rows = [["Validation Failures"]]
    headers = [
        ("Profile Selected:", profile_name),
        ("Report Generated At:", make_timestamp()),
        ("Directory Validated:", template_path),
        ("Checksum:", hash_directory(template_path)),
        ("Total Errors:", len(faildata) + len(COLLECTION_FAILURES)),
    ]
    rows.append([])
    for header in headers:
        rows.append(header)
    rows.append([])

    if COLLECTION_FAILURES:
        rows.append([COLLECTION_FAILURE_WARNING])
        rows.append(["Validation File", "Test", "Fixtures", "Error"])
        for failure in COLLECTION_FAILURES:
            rows.append(
                [
                    failure["module"],
                    failure["test"],
                    ";".join(failure["fixtures"]),
                    failure["error"],
                ]
            )
        rows.append([])

    # table header
    rows.append([col for col, _ in report_columns])

    # table content
    for data in faildata.values():
        rows.append(
            [
                data.get("file", ""),
                data.get("test_file", ""),
                data.get("req_description", ""),
                data.get("resolution_steps", ""),
                data.get("message", ""),
                data.get("raw_output", ""),
            ]
        )

    output_path = os.path.join(output_dir, "report.csv")
    with open(output_path, "w", newline="") as f:
        writer = csv.writer(f)
        for row in rows:
            writer.writerow(row)


def generate_excel_report(output_dir, profile_name, template_path, faildata):
    output_path = os.path.join(output_dir, "report.xlsx")
    workbook = xlsxwriter.Workbook(output_path)
    bold = workbook.add_format({"bold": True})
    code = workbook.add_format(({"font_name": "Courier", "text_wrap": True}))
    normal = workbook.add_format({"text_wrap": True})
    heading = workbook.add_format({"bold": True, "font_size": 18})
    worksheet = workbook.add_worksheet("failures")
    worksheet.write(0, 0, "Validation Failures", heading)

    headers = [
        ("Profile Selected:", profile_name),
        ("Report Generated At:", make_timestamp()),
        ("Directory Validated:", template_path),
        ("Checksum:", hash_directory(template_path)),
        ("Total Errors:", len(faildata) + len(COLLECTION_FAILURES)),
    ]
    for row, (header, value) in enumerate(headers, start=2):
        worksheet.write(row, 0, header, bold)
        worksheet.write(row, 1, value)

    worksheet.set_column(0, len(headers) - 1, 40)
    worksheet.set_column(len(headers), len(headers), 80)

    if COLLECTION_FAILURES:
        collection_failures_start = 2 + len(headers) + 2
        worksheet.write(collection_failures_start, 0, COLLECTION_FAILURE_WARNING, bold)
        collection_failure_headers = ["Validation File", "Test", "Fixtures", "Error"]
        for col_num, col_name in enumerate(collection_failure_headers):
            worksheet.write(collection_failures_start + 1, col_num, col_name, bold)
        for row, data in enumerate(COLLECTION_FAILURES, collection_failures_start + 2):
            worksheet.write(row, 0, data["module"])
            worksheet.write(row, 1, data["test"])
            worksheet.write(row, 2, ",".join(data["fixtures"]))
            worksheet.write(row, 3, data["error"], code)

    # table header
    start_error_table_row = 2 + len(headers) + len(COLLECTION_FAILURES) + 4
    worksheet.write(start_error_table_row, 0, "Validation Failures", bold)
    for col_num, (col_name, _) in enumerate(report_columns):
        worksheet.write(start_error_table_row + 1, col_num, col_name, bold)

    # table content
    for row, data in enumerate(faildata.values(), start=start_error_table_row + 2):
        for col, key in enumerate(report.values()):
            if key == "file":
                paths = (
                    [data[key]] if isinstance(data[key], string_types) else data[key]
                )
                contents = "\n".join(paths)
                worksheet.write(row, col, contents, normal)
            elif key == "raw_output":
                worksheet.write_string(row, col, data[key], code)
            else:
                worksheet.write(row, col, data[key], normal)

    workbook.close()


def generate_html_report(outpath, profile_name, template_path, faildata):
    failures = []
    for data in faildata.values():
        failures.append(
            {
                "file_links": make_href(data["file"]),
                "test_id": data["test_file"],
                "error_message": data["message"],
                "raw_output": data["raw_output"],
                "requirements": docutils.core.publish_parts(
                    writer_name="html", source=data["req_description"]
                )["body"],
                "resolution_steps": data["resolution_steps"],
            }
        )
    pkg_dir = os.path.split(__file__)[0]
    j2_template_path = os.path.join(pkg_dir, "report.html.jinja2")
    with open(j2_template_path, "r") as f:
        report_template = jinja2.Template(f.read())
        contents = report_template.render(
            num_failures=len(failures) + len(COLLECTION_FAILURES),
            profile_name=profile_name,
            template_dir=make_href(template_path),
            checksum=hash_directory(template_path),
            timestamp=make_timestamp(),
            failures=failures,
            collection_failures=COLLECTION_FAILURES,
        )
    with open(os.path.join(outpath, "report.html"), "w") as f:
        f.write(contents)


def pytest_addoption(parser):
    """
    Add needed CLI arguments
    """
    parser.addoption(
        "--template-directory",
        dest="template_dir",
        action="append",
        help="Directory which holds the templates for validation",
    )

    parser.addoption(
        "--self-test",
        dest="self_test",
        action="store_true",
        help="Test the unit tests against their fixtured data",
    )

    parser.addoption(
        "--validation-profile",
        dest="validation_profile",
        action="store",
        help="Runs all unmarked tests plus test with a matching marker",
    )

    parser.addoption(
        "--validation-profile-name",
        dest="validation_profile_name",
        action="store",
        help="Friendly name of the validation profile used in reports",
    )

    parser.addoption(
        "--report-format",
        dest="report_format",
        action="store",
        help="Format of output report (html, csv, excel)",
    )

    parser.addoption(
        "--continue-on-failure",
        dest="continue_on_failure",
        action="store_true",
        help="Continue validation even when structural errors exist in input files",
    )


def pytest_configure(config):
    """
    Ensure that we are receive either `--self-test` or
    `--template-dir=<directory` as CLI arguments
    """
    if config.getoption("template_dir") and config.getoption("self_test"):
        raise Exception('"--template-dir", and "--self-test"' " are mutually exclusive")
    if not (
        config.getoption("template_dir")
        or config.getoption("self_test")
        or config.getoption("help")
    ):
        raise Exception('One of "--template-dir" or' ' "--self-test" must be specified')


def pytest_generate_tests(metafunc):
    """
    If a unit test requires an argument named 'filename'
    we generate a test for the filenames selected. Either
    the files contained in `template_dir` or if `template_dir`
    is not specified on the CLI, the fixtures associated with this
    test name.
    """

    # noinspection PyBroadException
    try:
        if "filename" in metafunc.fixturenames:
            from .parametrizers import parametrize_filename

            parametrize_filename(metafunc)

        if "filenames" in metafunc.fixturenames:
            from .parametrizers import parametrize_filenames

            parametrize_filenames(metafunc)

        if "template_dir" in metafunc.fixturenames:
            from .parametrizers import parametrize_template_dir

            parametrize_template_dir(metafunc)

        if "environment_pair" in metafunc.fixturenames:
            from .parametrizers import parametrize_environment_pair

            parametrize_environment_pair(metafunc)

        if "heat_volume_pair" in metafunc.fixturenames:
            from .parametrizers import parametrize_heat_volume_pair

            parametrize_heat_volume_pair(metafunc)

        if "yaml_files" in metafunc.fixturenames:
            from .parametrizers import parametrize_yaml_files

            parametrize_yaml_files(metafunc)

        if "env_files" in metafunc.fixturenames:
            from .parametrizers import parametrize_environment_files

            parametrize_environment_files(metafunc)

        if "yaml_file" in metafunc.fixturenames:
            from .parametrizers import parametrize_yaml_file

            parametrize_yaml_file(metafunc)

        if "env_file" in metafunc.fixturenames:
            from .parametrizers import parametrize_environment_file

            parametrize_environment_file(metafunc)

        if "parsed_yaml_file" in metafunc.fixturenames:
            from .parametrizers import parametrize_parsed_yaml_file

            parametrize_parsed_yaml_file(metafunc)

        if "parsed_environment_file" in metafunc.fixturenames:
            from .parametrizers import parametrize_parsed_environment_file

            parametrize_parsed_environment_file(metafunc)

        if "heat_template" in metafunc.fixturenames:
            from .parametrizers import parametrize_heat_template

            parametrize_heat_template(metafunc)

        if "heat_templates" in metafunc.fixturenames:
            from .parametrizers import parametrize_heat_templates

            parametrize_heat_templates(metafunc)

        if "volume_template" in metafunc.fixturenames:
            from .parametrizers import parametrize_volume_template

            parametrize_volume_template(metafunc)

        if "volume_templates" in metafunc.fixturenames:
            from .parametrizers import parametrize_volume_templates

            parametrize_volume_templates(metafunc)

        if "template" in metafunc.fixturenames:
            from .parametrizers import parametrize_template

            parametrize_template(metafunc)

        if "templates" in metafunc.fixturenames:
            from .parametrizers import parametrize_templates

            parametrize_templates(metafunc)
    except Exception as e:
        # If an error occurs in the collection phase, then it won't be logged as a
        # normal test failure.  This means that failures could occur, but not
        # be seen on the report resulting in a false positive success message.  These
        # errors will be stored and reported separately on the report
        COLLECTION_FAILURES.append(
            {
                "module": metafunc.module.__name__,
                "test": metafunc.function.__name__,
                "fixtures": metafunc.fixturenames,
                "error": traceback.format_exc(),
            }
        )
        raise e


def hash_directory(path):
    md5 = hashlib.md5()
    for dir_path, sub_dirs, filenames in os.walk(path):
        for filename in filenames:
            file_path = os.path.join(dir_path, filename)
            with open(file_path, "rb") as f:
                md5.update(f.read())
    return md5.hexdigest()


def load_current_requirements():
    """Loads dict of current requirements or empty dict if file doesn't exist"""

    url = 'https://onap.readthedocs.io/en/latest/_downloads/needs.json'
    r = requests.get(url)
    with open('requirements.json', 'wb') as needs:
        needs.write(r.content)
    path = "heat_requirements.json"
    if not os.path.exists(path):
        return {}
    with io.open(path, encoding="utf8", mode="r") as f:
        data = json.load(f)
        version = data["current_version"]
        return data["versions"][version]["needs"]


def compat_open(path):
    """Invokes open correctly depending on the Python version"""
    if sys.version_info.major < 3:
        return open(path, "wb")
    else:
        return open(path, "w", newline="")


def unicode_writerow(writer, row):
    if sys.version_info.major < 3:
        row = [s.encode("utf8") for s in row]
    writer.writerow(row)


def pytest_report_collectionfinish(config, startdir, items):

    """Generates a simple traceability report to output/traceability.csv"""
    traceability_path = os.path.join(__path__[0], "../output/traceability.csv")
    output_dir = os.path.split(traceability_path)[0]
    if not os.path.exists(output_dir):
        os.makedirs(output_dir)
    requirements = load_current_requirements()
    unmapped, mapped = partition(
        lambda item: hasattr(item.function, "requirement_ids"), items
    )

    req_to_test = collections.defaultdict(set)
    mapping_errors = set()
    for item in mapped:
        for req_id in item.function.requirement_ids:
            if req_id not in req_to_test:
                req_to_test[req_id].add(item)
            if req_id not in requirements:
                mapping_errors.add(
                    (req_id, item.function.__module__, item.function.__name__)
                )

    mapping_error_path = os.path.join(__path__[0], "../output/mapping_errors.csv")
    with compat_open(mapping_error_path) as f:
        writer = csv.writer(f)
        for error in mapping_errors:
            unicode_writerow(writer, error)

    with compat_open(traceability_path) as f:
        out = csv.writer(f)
        unicode_writerow(
            out,
            ("Requirement ID", "Requirement", "Section", "Test Module", "Test Name"),
        )
        for req_id, metadata in requirements.items():
            if req_to_test[req_id]:
                for item in req_to_test[req_id]:
                    unicode_writerow(
                        out,
                        (
                            req_id,
                            metadata["description"],
                            metadata["section_name"],
                            item.function.__module__,
                            item.function.__name__,
                        ),
                    )
            else:
                unicode_writerow(
                    out,
                    (req_id, metadata["description"], metadata["section_name"], "", ""),
                )
        # now write out any test methods that weren't mapped to requirements
        for item in unmapped:
            unicode_writerow(
                out, ("", "", "", item.function.__module__, item.function.__name__)
            )