[VVP] Removing outdated test-engine code

Issue-ID: VVP-381
Signed-off-by: Lovett, Trevor <trevor.lovett@att.com>
Change-Id: I8622794a24deb83e14334e3454194914b835d37d

3 files changed, 0 insertions, 750 deletions

diff --git a/rados/__init__.py b/rados/__init__.py
deleted file mode 100644
index 32b601a..0000000
--- a/rados/__init__.py
+++ /dev/null
@@ -1,38 +0,0 @@
-
-# ============LICENSE_START==========================================
-# org.onap.vvp/test-engine
-# ===================================================================
-# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
-# ===================================================================
-#
-# Unless otherwise specified, all software contained herein is licensed
-# under the Apache License, Version 2.0 (the “License”);
-# you may not use this software except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-#
-# Unless otherwise specified, all documentation contained herein is licensed
-# under the Creative Commons License, Attribution 4.0 Intl. (the “License”);
-# you may not use this documentation except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             https://creativecommons.org/licenses/by/4.0/
-#
-# Unless required by applicable law or agreed to in writing, documentation
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# ============LICENSE_END============================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
diff --git a/rados/rgwa_client.py b/rados/rgwa_client.py
deleted file mode 100644
index 23715ec..0000000
--- a/rados/rgwa_client.py
+++ /dev/null
@@ -1,627 +0,0 @@
-
-# ============LICENSE_START==========================================
-# org.onap.vvp/test-engine
-# ===================================================================
-# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
-# ===================================================================
-#
-# Unless otherwise specified, all software contained herein is licensed
-# under the Apache License, Version 2.0 (the “License”);
-# you may not use this software except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-#
-# Unless otherwise specified, all documentation contained herein is licensed
-# under the Creative Commons License, Attribution 4.0 Intl. (the “License”);
-# you may not use this documentation except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             https://creativecommons.org/licenses/by/4.0/
-#
-# Unless required by applicable law or agreed to in writing, documentation
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# ============LICENSE_END============================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-"""A Ceph Rados Gateway Admin Operations API client."""
-
-# Design goals:
-#
-# - Minimal abstractions over the raw Requests calls
-# - Python method signatures enforce optional/required API parameters
-# - DRY by procedurally mapping kwargs to API parameters
-# - (TODO) procedurally generate this library directly from Ceph docs
-
-import os
-
-from awsauth import S3Auth
-from requests import request
-
-
-def _validate_args(valid_args, **kwargs):
-    """Validate kwargs conforms to a specification of allowable values.
-
-    Ensures that any keyword arguments either:
-    - are unconstrained by valid_args, or
-    - have a value of None, or
-    - have a value that matches one of the corresponding specified values.
-
-    This is useful for limiting several common keyword arguments to a set of
-    values across many methods, while ignoring those set to None. (Typically,
-    these are optional and were unspecified by the caller.)
-
-    This is a validator function: it either returns None on success, or raises
-    an exception on failure.
-
-    """
-    for keyword, value in kwargs.items():
-        if keyword not in valid_args:
-            continue
-        if value is None:
-            continue
-        if value in valid_args[keyword]:
-            continue
-        raise ValueError(
-            "Invalid parameter {:s}={!r}; must be one of: {!r}".format(
-                keyword, value, valid_args[keyword]))
-
-
-class RGWAClient(object):
-    """A client for the Ceph Rados Gateway Admin Operations API.
-
-    This class is implemented as a simplistic/mechanical wrapper around the
-    Python Requests library. Calling its methods triggers HTTP(S) calls to the
-    specified API endpoint, and the responses are decoded from JSON to Python
-    objects before being returned.
-
-    The methods available on this object should mirror the endpoints of the API
-    closely enough that its documentation may be used as a reference:
-
-    http://docs.ceph.com/docs/master/radosgw/adminops/
-
-    """
-    valid_args = {
-        'quota_type': ['user', 'bucket'],
-        'key_type': ['s3', 'swift'],
-    },
-
-    def __init__(
-            self,
-            base_url,
-            access_key=None,
-            secret_key=None,
-            verify='/opt/secrets/site-crt/site.crt',
-            return_raw_response=False):
-        """
-
-        base_url (string):
-
-            The full URL to your admin entry point. Should include the protocol
-            ("http://" or "https://"), and optionally the port as well. The
-            URL-path to the admin entry point is configurable using "rgw admin
-            entry" in your Ceph configuration. Example:
-
-                "https://s3.example.com:8080/admin"
-
-        access_key (string): Your AWS Access Key ID
-        secret_key (string): Your AWS Secret Access Key
-
-            If either of access_key or secret_key are omitted, this class will
-            attempt to look the values in the environment variables
-            AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY respectively.
-
-        verify (boolean):
-
-            Set to False to disable SSL Certificate verification, or optionally
-            set to the path to a CA Certificate bundle. This is passed directly
-            to the underlying call to the requests library; see:
-            http://docs.python-requests.org/en/master/user/advanced/#ssl-cert-verification
-
-        return_raw_response (boolean):
-
-            All of the methods of this class return, upon success, the objects
-            resulting from parsing the JSON data returned by the API. On error,
-            they raise an exception. This is meant for caller convenience, but
-            may be undesirable in some situations because callers have no
-            access to the additional data and methods available in the raw
-            Response object.
-
-                from ice_rgwa_client import (
-                    RGWAClient, HTTPError)
-                # ...
-                rgw = RGWAClient(
-                    access_key='...',
-                    secret_key='...',
-                    base_url='...',
-                    )
-                # ...
-                try:
-                    user = rgw.get_user('nonexistent')
-                except HTTPError as exc:
-                    if exc.response.status_code == 404:
-                        print("No such user")
-                        continue
-                    else:
-                        print("Problem loading user")
-                        raise
-
-            If return_raw_response is set to True, the methods will instead
-            return the raw Response object from the Requests library, and it
-            will be up to the caller to check the error status as needed.
-
-            See
-            http://docs.python-requests.org/en/master/user/quickstart/#json-response-content
-
-                from ice_rgwa_client import RGWAClient
-                # ...
-                rgw = RGWAClient(
-                    access_key='...',
-                    secret_key='...',
-                    base_url='...',
-                    return_raw_response=True,
-                    )
-                # ...
-                response = rgw.get_user('nonexistent')
-                if response.status_code == 404:
-                    print("No such user")
-                elif response.status_code != 200:
-                    print("Problem loading user")
-                else:
-                    user = response.json()
-
-        """
-        if not access_key:
-            access_key = os.environ.get('AWS_ACCESS_KEY_ID')
-        if not secret_key:
-            secret_key = os.environ.get('AWS_SECRET_ACCESS_KEY')
-        self.base_url = base_url
-        self.verify = verify
-        self.auth = S3Auth(access_key, secret_key, service_url=base_url)
-        self.return_raw_response = return_raw_response
-
-    def _request(self, method, endpoint, action=None, data=None, **kwargs):
-        """Helper method to factor out actions common to Ceph Rados Gateway
-        Admin requests.
-
-        "data" is a dictionary that, if provided, will be JSON-encoded and
-        submitted in the body of the request.
-
-        Other keyword arguments will be encoded and used as URL parameters.
-
-        "_" in kwargs will be converted to "-" in URL parameter keys.
-
-        """
-        # We can validate some arguments before the round trip to the server
-        _validate_args(self.valid_args, **kwargs)
-
-        # We never want to pass literal None to the API, so we can use None to
-        # indicate "do not use this k/v pair at all." Using this, optional
-        # parameters still appear in the function signature but will be omitted
-        # from the request when unspecified.
-        params = {
-            k.replace('_', '-'): v
-            for k, v in kwargs.items()
-            if v is not None}
-
-        # Same for body data but without _/- conversion...
-        data = {} if data is None else {
-            k: v
-            for k, v in data.items()
-            if v is not None}
-
-        # The Ceph Object Gateway Admin Operations API specifies, for some
-        # operations, a key-only URL parameter (that we call "action") with no
-        # associated value. For simplicity, we violate the spec slightly by
-        # assigning it a value of "". It seems to work.
-        if action:
-            params[action] = ''
-
-        # JSON output is the default, so there's no need to specify format=json
-        # parameter despite all the examples in the docs making it explicit.
-
-        url = '%s/%s' % (self.base_url, endpoint)
-        response = request(
-            method=method,
-            url=url,
-            params=params,
-            json=data,
-            auth=self.auth,
-            verify=self.verify,
-        )
-        if self.return_raw_response:
-            return response
-        else:
-            if response.status_code == 404:
-                return None
-
-            response.raise_for_status()
-            try:
-                return response.json()
-            except ValueError:
-                # At this point we have a successful 200 status but a problem
-                # decoding the json. Some responses are empty:
-                if not response.content:
-                    return {}
-                raise
-
-    #
-    # These methods appear in the same order as the corresponding endpoints in
-    # the documentation. The docstrings are copied verbatim from that
-    # documentation. See:
-    # http://docs.ceph.com/docs/master/radosgw/adminops/
-    #
-
-    def get_usage(
-            self,
-            uid=None,
-            start=None,
-            end=None,
-            show_entries=False,
-            show_summary=False):
-        """Request bandwidth usage information.
-
-        Note: this feature is disabled by default, can be enabled by setting
-        'rgw enable usage log = true' in the appropriate section of ceph.conf.
-        For changes in ceph.conf to take effect, radosgw process restart is
-        needed.
-
-        """
-        return self._request(
-            'get', 'usage',
-            uid=uid,
-            start=start,
-            end=end,
-            show_entries=show_entries,
-            show_summary=show_summary,
-        )
-
-    def trim_usage(self, uid=None, start=None, end=None, remove_all=False):
-        """Remove usage information.
-
-        With no dates specified, removes all usage information.
-
-        Note: this feature is disabled by default, can be enabled by setting
-        'rgw enable usage log = true' in the appropriate section of ceph.conf.
-        For changes in ceph.conf to take effect, radosgw process restart is
-        needed.
-
-        """
-        return self._request(
-            'delete', 'usage',
-            uid=uid,
-            start=start,
-            end=end,
-            remove_all=remove_all,
-        )
-
-    def get_user(self, uid):
-        """Get user information."""
-        return self._request('get', 'user', uid=uid)
-
-    def create_user(self, uid, display_name, email=None, key_type='s3',
-                    access_key=None, secret_key=None, user_caps=None,
-                    generate_key=True, max_buckets=None, suspended=False):
-        """Create a new user.
-
-        By default, a S3 key pair will be created automatically and returned in
-        the response. If only one of access_key or secret_key is provided, the
-        omitted key will be automatically generated. By default, a generated
-        key is added to the keyring without replacing an existing key pair. If
-        access_key is specified and refers to an existing key owned by the user
-        then it will be modified.
-
-        """
-        return self._request(
-            'put', 'user',
-            uid=uid,
-            display_name=display_name,
-            email=email,
-            key_type=key_type,
-            access_key=access_key,
-            secret_key=secret_key,
-            user_caps=user_caps,
-            generate_key=generate_key,
-            max_buckets=max_buckets,
-            suspended=suspended,
-        )
-
-    def modify_user(self, uid, display_name=None, email=None, key_type='s3',
-                    access_key=None, secret_key=None, user_caps=None,
-                    generate_key=True, max_buckets=None, suspended=False):
-        """Modify a user."""
-        return self._request(
-            'post', 'user',
-            uid=uid,
-            display_name=display_name,
-            email=email,
-            key_type=key_type,
-            access_key=access_key,
-            secret_key=secret_key,
-            user_caps=user_caps,
-            generate_key=generate_key,
-            max_buckets=max_buckets,
-            suspended=suspended,
-        )
-
-    def remove_user(self, uid, purge_data=False):
-        """Remove an existing user."""
-        return self._request(
-            'delete', 'user',
-            uid=uid,
-            purge_data=purge_data,
-        )
-
-    def create_subuser(
-            self,
-            uid,
-            subuser=None,
-            secret_key=None,
-            access_key=None,
-            key_type=None,
-            access=None,
-            generate_secret=False):
-        """Create a new subuser.
-
-        (Primarily useful for clients using the Swift API). Note that in
-        general for a subuser to be useful, it must be granted permissions by
-        specifying access. As with user creation if subuser is specified
-        without secret, then a secret key will be automatically generated.
-
-        """
-        return self._request(
-            'put', 'user', 'subuser',
-            uid=uid,
-            subuser=subuser,
-            secret_key=secret_key,
-            access_key=access_key,
-            key_type=key_type,
-            access=access,
-            generate_secret=generate_secret,
-        )
-
-    def modify_subuser(
-            self,
-            uid,
-            subuser,
-            secret=None,
-            key_type='swift',
-            access=None,
-            generate_secret=False):
-        """Modify an existing subuser."""
-        return self._request(
-            'post', 'user', 'subuser',
-            uid=uid,
-            subuser=subuser,
-            secret=secret,
-            key_type=key_type,
-            access=access,
-            generate_secret=generate_secret,
-        )
-
-    def remove_subuser(self, uid, subuser, purge_keys=True):
-        """Remove an existing subuser."""
-        return self._request(
-            'delete', 'user', 'subuser',
-            uid=uid,
-            subuser=subuser,
-            purge_keys=purge_keys,
-        )
-
-    def create_key(self, uid, subuser=None, key_type='s3', access_key=None,
-                   secret_key=None, generate_key=True):
-        """Create a new key.
-
-        If a subuser is specified then by default created keys will be swift
-        type. If only one of access_key or secret_key is provided the committed
-        key will be automatically generated, that is if only secret_key is
-        specified then access_key will be automatically generated. By default,
-        a generated key is added to the keyring without replacing an existing
-        key pair. If access_key is specified and refers to an existing key
-        owned by the user then it will be modified. The response is a container
-        listing all keys of the same type as the key created. Note that when
-        creating a swift key, specifying the option access_key will have no
-        effect. Additionally, only one swift key may be held by each user or
-        subuser.
-
-        """
-        return self._request(
-            'put', 'user', 'key',
-            uid=uid,
-            subuser=subuser,
-            key_type=key_type,
-            access_key=access_key,
-            secret_key=secret_key,
-            generate_key=generate_key,
-        )
-
-    def remove_key(self, access_key, key_type=None, uid=None, subuser=None):
-        """Remove an existing key."""
-        return self._request(
-            'delete', 'user', 'key',
-            access_key=access_key,
-            key_type=key_type,
-            uid=uid,
-            subuser=subuser,
-        )
-
-    def get_bucket(self, bucket=None, uid=None, stats=False):
-        """Get information about a subset of the existing buckets.
-
-        If uid is specified without bucket then all buckets beloning to the
-        user will be returned. If bucket alone is specified, information for
-        that particular bucket will be retrieved.
-
-        """
-        return self._request(
-            'get', 'bucket',
-            bucket=bucket,
-            uid=uid,
-            stats=stats,
-        )
-
-    def check_bucket_index(self, bucket, check_objects=False, fix=False):
-        """Check the index of an existing bucket.
-
-        NOTE: to check multipart object accounting with check-objects, fix must
-        be set to True.
-
-        """
-        return self._request(
-            'get', 'bucket', 'index',
-            bucket=bucket,
-            check_objects=check_objects,
-            fix=fix,
-        )
-
-    def remove_bucket(self, bucket, purge_objects=False):
-        """Delete an existing bucket."""
-        return self._request(
-            'delete', 'bucket',
-            bucket=bucket,
-            purge_objects=purge_objects,
-        )
-
-    def unlink_bucket(self, bucket, uid):
-        """Unlink a bucket from a specified user.
-
-        Primarily useful for changing bucket ownership.
-
-        """
-        return self._request(
-            'post', 'bucket',
-            bucket=bucket,
-            uid=uid,
-        )
-
-    def link_bucket(self, bucket, bucket_id, uid):
-        """Link a bucket to a specified user, unlinking the bucket from any
-        previous user.
-
-        """
-        # Both bucket and bucket_id are really required. Use get_bucket() to
-        # discover the id of a bucket from its name.
-        #
-        # FIXME: add a convenience method to look up the id?
-        return self._request(
-            'put', 'bucket',
-            bucket=bucket,
-            bucket_id=bucket_id,
-            uid=uid,
-        )
-
-    def remove_object(self, bucket, object_name):
-        """Remove an existing object.
-
-        NOTE: Does not require owner to be non-suspended.
-
-        """
-        return self._request(
-            'delete', 'bucket', 'object',
-            bucket=bucket,
-            object_name=object_name,
-        )
-
-    def get_policy(self, bucket, object_name=None):
-        """Read the policy of an object or bucket."""
-        return self._request(
-            'get', 'bucket', 'policy',
-            bucket=bucket,
-            object_name=object_name,
-        )
-
-    def add_capability(self, uid, user_caps):
-        """Add an administrative capability to a specified user.
-
-        uid (string):
-            The user ID to add an administrative capability to.
-
-        user_caps (string):
-            The administrative capability to add to the user. Example:
-            "usage=read,write;user=write"
-
-        """
-        return self._request(
-            'put', 'user', 'caps',
-            uid=uid,
-            user_caps=user_caps,
-        )
-
-    def remove_capability(self, uid, user_caps):
-        """Remove an administrative capability from a specified user."""
-        return self._request(
-            'delete', 'user', 'caps',
-            uid=uid,
-            user_caps=user_caps,
-        )
-
-    def get_quota(self, uid, quota_type):
-        return self._request(
-            'get', 'user', 'quota',
-            uid=uid,
-            quota_type=quota_type,
-        )
-
-    def set_quota(self, uid, quota_type, bucket=None, max_size_kb=None,
-                  max_objects=None, enabled=None):
-        return self._request(
-            'put', 'user', 'quota',
-            quota_type=quota_type,
-            uid=uid,
-            bucket=bucket,
-            max_size_kb=max_size_kb,
-            max_objects=max_objects,
-            enabled=enabled,
-        )
-
-    #
-    # Convenience methods
-    #
-
-    def get_user_quota(self, uid):
-        return self.get_quota(uid=uid, quota_type='user')
-
-    def set_user_quota(
-            self,
-            uid,
-            max_size_kb=None,
-            max_objects=None,
-            enabled=None):
-        return self.set_quota(
-            uid=uid,
-            quota_type='user',
-            max_size_kb=max_size_kb,
-            max_objects=max_objects,
-            enabled=enabled,
-        )
-
-    def get_user_bucket_quota(self, uid):
-        return self.get_quota(uid=uid, quota_type='bucket')
-
-    def set_user_bucket_quota(
-            self,
-            uid,
-            bucket,
-            max_size_kb=None,
-            max_objects=None,
-            enabled=None):
-        return self.set_quota(
-            uid=uid,
-            bucket=bucket,
-            quota_type='bucket',
-            max_size_kb=max_size_kb,
-            max_objects=max_objects,
-            enabled=enabled,
-        )
diff --git a/rados/rgwa_client_factory.py b/rados/rgwa_client_factory.py
deleted file mode 100644
index 6df2366..0000000
--- a/rados/rgwa_client_factory.py
+++ /dev/null
@@ -1,85 +0,0 @@
-
-# ============LICENSE_START==========================================
-# org.onap.vvp/test-engine
-# ===================================================================
-# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
-# ===================================================================
-#
-# Unless otherwise specified, all software contained herein is licensed
-# under the Apache License, Version 2.0 (the “License”);
-# you may not use this software except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-#
-#
-# Unless otherwise specified, all documentation contained herein is licensed
-# under the Creative Commons License, Attribution 4.0 Intl. (the “License”);
-# you may not use this documentation except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#             https://creativecommons.org/licenses/by/4.0/
-#
-# Unless required by applicable law or agreed to in writing, documentation
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# ============LICENSE_END============================================
-#
-# ECOMP is a trademark and service mark of AT&T Intellectual Property.
-from boto.s3.connection import S3Connection, OrdinaryCallingFormat
-from django.conf import settings
-from rados.rgwa_client import RGWAClient
-
-
-class RGWAClientFactory(object):
-    __standard_client = None
-    __admin_client = None
-
-    def __init__(self):
-        if self.__standard_client is None:
-            self.__set_standard_client()
-
-        if self.__admin_client is None:
-            self.__set_admin_client()
-
-    @classmethod
-    def __set_standard_client(cls):
-        if cls.__standard_client is None:
-            cls.__standard_client = S3Connection(
-                host=settings.AWS_S3_HOST,
-                port=settings.AWS_S3_PORT,
-                aws_access_key_id=settings.AWS_ACCESS_KEY_ID,
-                aws_secret_access_key=settings.AWS_SECRET_ACCESS_KEY,
-                calling_format=OrdinaryCallingFormat(),
-                is_secure=True)
-            cls.__standard_client.num_retries = 0
-
-    @classmethod
-    def __set_admin_client(cls):
-        if cls.__admin_client is None:
-            cls.__admin_client = RGWAClient(
-                base_url='https://{S3_HOST}:{S3_PORT}/admin'.format(
-                    S3_HOST=settings.AWS_S3_HOST,
-                    S3_PORT=settings.AWS_S3_PORT, ))
-
-    @classmethod
-    def standard(cls):
-        if cls.__standard_client is None:
-            cls.__set_standard_client()
-        return cls.__standard_client
-
-    @classmethod
-    def admin(cls):
-        if cls.__admin_client is None:
-            cls.__set_admin_client()
-        return cls.__admin_client