diff options
author | 2020-02-07 12:16:44 -0600 | |
---|---|---|
committer | 2020-02-12 00:21:18 +0000 | |
commit | f58e4bf7d838302fbd1fcc52ea5b1f17d5171ace (patch) | |
tree | ed6637c55e77fea44e09a8c7e5adcc04458cd921 /docs/Chapter8 | |
parent | 04e1319030298202d105cf4a09c7f752d8d30952 (diff) |
Add OPNFV Verified VNF Badge test instructions
Issue-ID: VNFRQTS-805
Signed-off-by: Lovett, Trevor <trevor.lovett@att.com>
Change-Id: I82e858675787d0ba7000c37b8b2ef35512230354
(cherry picked from commit 9644680a4797e802abaa2009c8f888b9a5238669)
Diffstat (limited to 'docs/Chapter8')
-rw-r--r-- | docs/Chapter8/OPNFV-Verified-Badging.rst | 812 | ||||
-rw-r--r-- | docs/Chapter8/index.rst | 1 | ||||
-rw-r--r-- | docs/Chapter8/input-VNF-API-fail-single_module.zip | bin | 0 -> 2944 bytes | |||
-rw-r--r-- | docs/Chapter8/input-VNF-API-pass-single_module.zip | bin | 0 -> 3527 bytes | |||
-rw-r--r-- | docs/Chapter8/tosca_vnf_test_environment.png | bin | 0 -> 101795 bytes | |||
-rw-r--r-- | docs/Chapter8/tosca_vnf_test_flow.png | bin | 0 -> 40614 bytes |
6 files changed, 813 insertions, 0 deletions
diff --git a/docs/Chapter8/OPNFV-Verified-Badging.rst b/docs/Chapter8/OPNFV-Verified-Badging.rst new file mode 100644 index 0000000..946bc6b --- /dev/null +++ b/docs/Chapter8/OPNFV-Verified-Badging.rst @@ -0,0 +1,812 @@ +.. Modifications Copyright © 2017-2018 AT&T Intellectual Property. + +.. Licensed under the Creative Commons License, Attribution 4.0 Intl. + (the "License"); you may not use this documentation except in compliance + with the License. You may obtain a copy of the License at + +.. https://creativecommons.org/licenses/by/4.0/ + +.. Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + +OPNFV Verfied Program Badging for VNFs +-------------------------------------- + +OPNFV Verified Program Overview +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The `OPNFV Verified Program (OVP) <https://www.lfnetworking.org/OVP/>`__ is + + an open source, community-led compliance and verification program to + demonstrate the readiness and availability of commercial NFV products and + services, including NFVI and VNFs, using OPNFV and ONAP components. + + -- Source: OVP + +The program currently offers verification badges for NFVI, VNFs, and Labs. The +VNF badge aims to verify that a given VNF is compatible and interoperable with +a given release of ONAP and an ONAP-compatible NFVI. + +Relationship to ONAP +^^^^^^^^^^^^^^^^^^^^ + +The ONAP VNF Requirements project defines the mandatory and recommended +requirements for a VNF to be successfully orchestrated by ONAP. At this time, +the OPNFV VNF badge automates the verification of a subset of these +requirements with plans to expand the scope over verified requirements over +time. + +Currently, the `OPNFV VNF badge <https://vnf-verified.lfnetworking.org/#/>`__ +covers the following: + +* Compliance checks of the contents of a VNF onboarding package for :ref:`Heat-based <heat_requirements>` + or :ref:`TOSCA-based <tosca_requirements>` VNFs. + + * Validation of the packages are, respectively, performed by the ONAP VVP + and ONAP VNFSDK projects. + +* Validation that the package can be onboarded, modeled, configured, deployed, + and instantiated on an ONAP-compatible NFVI (currently OpenStack) + + +How to Receive a ONPFV VNF Badge +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The ONAP platform includes a set of automated tests that can be setup and +executed for a given VNF to verify its compliance with the in-scope VNF +Requirements. This test suite will produce a result file that is compatible +for submission to the OPNFV Verified Program. Please refer to the +`OPNFV VNF Portal <https://vnf-verified.lfnetworking.org/#/>`__ for more details +on registering for the program and submitting your results. + +The following section will describe how to setup and execute the tests. + +Executing the OPNFV Verified Compliance and Validation Tests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The instructions related to setting up and executing the tests vary based on +whether the VNF is modeled in OpenStack Heat or in TOSCA. Please refer +to the appropriate section based on your VNF. + +* :ref:`heat_vnf_validation` +* :ref:`tosca_vnf_validation` + + +.. _heat_vnf_validation: + +Heat-based VNF Validation +~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section describes how to setup and execute the validation tests against +a VNF that is described using OpenStack Heat. + +Prerequisites ++++++++++++++ + +- ONAP El Alto Release deployed via :doc:`OOM <../../../../oom.git/docs/oom_quickstart_guide>` +- An OpenStack deployment is available and privisioned as ONAP's Cloud Site +- `kubectl <https://kubernetes.io/docs/tasks/tools/install-kubectl/>`__ is + installed on the system used to start the testing +- bash +- VNF Heat Templates +- Preload JSON files + +After deploying ONAP, you need to configure ONAP with: + +- A cloud owner +- A cloud region +- A subscriber +- A service type +- A project name +- An owning entity +- A platform +- A line of business +- A cloud site + +If you're not familiar with how to configure ONAP, there are guides that use +:doc:`Robot <../../../../integration.git/docs/docs_robot>` or +`REST API calls <https://wiki.onap.org/pages/viewpage.action?pageId=25431491>`__ +to handle the setup (including adding a new OpenStack site to ONAP). + +Validation Setup +++++++++++++++++ + +On your local machine, or the system from which you will run the tests, you will need to clone the +ONAP OOM project repo: + +.. code-block:: bash + + git clone --branch 5.0.1-ONAP ssh://<username>@gerrit.onap.org:29418/oom --recurse-submodules + +VNF Preparation ++++++++++++++++ + +The VNF lifecycle validation test suite requires the VNF to be packaged into a +specific directory hierarchy, shown below. + +.. code-block:: + + vnf_folder + ├── /templates + | └── base.yaml + | └── base.env + | └── incremental_0.yaml + | └── incremental_0.env + | └── ... + ├── /preloads + | └── base_preload.json + | └── incremental_0_preload.json + | └── ... + └── vnf-details.json + +- The name for ``vnf_folder`` is free-form, and can be located anywhere on your + computer. The path to this folder will be passed to the test suite as an + argument. +- ``/templates`` should contain your VVP-compliant VNF heat templates. +- ``/preloads`` should contain a preload file for each VNF module + + - For a VNF-API preload: ``vnf-name``, ``vnf-type``, ``generic-vnf-type``, + and ``generic-vnf-name`` should be empty strings. + - For a GR-API preload: ``vnf-name``, ``vnf-type``, ``vf-module-type``, + and ``vf-module-name`` should be empty strings. + - This information will be populated at runtime by the test suite. + +- ``vnf-details`` should be a JSON file with the information that will be used + by ONAP to instantiate the VNF. The structure of ``vnf-details`` is shown below. +- VNF disk image must be uploaded and available in the OpenStack project being + managed by ONAP +- ``modules`` must contain an entry for each module of the VNF. Only one module + can be a base module. +- ``api_type`` should match the format of the preloads (``vnf_api`` + or ``gr_api``) that are provided in the package. +- The other information should match what was used to configure ONAP during the + pre-requisite section of this guide. + +.. code-block:: json + + { + "vnf_name": "The Vnf Name", + "description": "Description of the VNF", + "modules": [ + { + "filename": "base.yaml", + "isBase": "true", + "preload": "base_preload.json" + }, + { + "filename": "incremental_0.yaml", + "isBase": "false", + "preload": "incremental_0.json" + }, + ], + "api_type": "[gr_api] or [vnf_api]", + "subscriber": "<subscriber name>", + "service_type": "<service type>", + "tenant_name": "<name of tenant>", + "region_id": "<name of region>", + "cloud_owner": "<name of cloud owner>", + "project_name": "<name of project>", + "owning_entity": "<name of owning entity>", + "platform": "<name of platform>", + "line_of_business": "<name of line of business>", + "os_password": "<openstack password>" + } + +Running the HEAT VNF Test ++++++++++++++++++++++++++ + +The ONAP OOM Robot framework will run the test, using ``kubectl`` to manage the +execution. The framework will copy your VNF template files to the Robot +container required to execute the test. + +.. code-block:: bash + + cd oom/kubernetes/robot + $ ./instantiate-k8s.sh --help + ./instantiate-k8s.sh [options] + + required: + -n, --namespace <namespace> namespace that robot pod is running under. + -f, --folder <folder> path to folder containing heat templates, preloads, and vnf-details.json. + + additional options: + -p, --poll some cloud environments (like azure) have a short time out value when executing + kubectl. If your shell exits before the test suite finishes, using this option + will poll the test suite logs every 30 seconds until the test finishes. + -t, --tag <tag> robot testcase tag to execute (default is instantiate_vnf). + + This script executes the VNF instantiation robot test suite. + - It copies the VNF folder to the robot container that is part of the ONAP deployment. + - It models, distributes, and instantiates a heat-based VNF. + - It copies the logs to an output directory, and creates a tarball for upload to the OVP portal. + + +**Sample execution:** + +.. code-block:: bash + + $ ./instantiate-k8s.sh --namespace onap --folder /tmp/vnf-instantiation/examples/VNF_API/pass/multi_module/ --poll + ... + ... + ... + ... + ------------------------------------------------------------------------------ + test suites.Vnf Instantiation :: The main driver for instantiating ... | PASS | + 1 critical test, 1 passed, 0 failed + 1 test total, 1 passed, 0 failed + ============================================================================== + test suites | PASS | + 1 critical test, 1 passed, 0 failed + 1 test total, 1 passed, 0 failed + ============================================================================== + Output: /share/logs/0003_ete_instantiate_vnf/output.xml + + set +x + test suite has finished + Copying Results from pod... + /tmp/vnf-instantiation /tmp/vnf-instantiation + a log.html + a results.json + a stack_report.json + a validation-scripts.json + /tmp/vnf-instantiation + VNF test results: /tmp/vnfdata.46749/vnf_heat_results.tar.gz + +The test suite takes about 10-15 minutes for a simple VNF, and will take longer +for a more complicated VNF. + +Reporting Results ++++++++++++++++++ + +Once the test suite is finished, it will create a directory and tarball in +``/tmp`` (the name of the directory and file is shown at the end of the stdout +of the script). There will be a ``results.json`` file in that directory +that has the ultimate outcome of the test, in the structure shown below. + +**Log Files** + +The output tar file will have 4 log files in it. + +- ``results.json``: This is high-level results file of all of the test steps, + and is consumed by the OVP portal. +- ``report.json``: This is the output of the VVP validation scripts. +- ``stack_report.json``: This is the output from querying OpenStack to validate + the Heat modules. +- ``log.html``: This is the Robot test log, and contains each execution step of + the test case. + +If the result is ``"PASS"``, that means the test suite was successful and the +tarball is ready for submission to the OVP portal. + +**results.json** + +.. code-block:: json + + { + "vnf_checksum": "afc57604a3b3b7401d5b8648328807b594d7711355a2315095ac57db4c334a50", + "build_tag": "vnf-validation-7055d30b-9a2e-4ca2-9409-499131cc86db", + "version": "2019.12", + "test_date": "2019-09-04 17:50:10.575", + "duration": 437.002, + "vnf_type": "heat", + "testcases_list": [ + { + "mandatory": "true", + "name": "onap-vvp.validate.heat", + "result": "PASS", + "objective": "onap heat template validation", + "sub_testcase": [], + "portal_key_file": "report.json" + }, + { + "mandatory": "true", + "name": "onap-vvp.lifecycle_validate.heat", + "result": "PASS", + "objective": "onap vnf lifecycle validation", + "sub_testcase": [ + { + "name": "model-and-distribute", + "result": "PASS" + }, + { + "name": "instantiation", + "result": "PASS" + } + ], + "portal_key_file": "log.html" + }, + { + "mandatory": "true", + "name": "stack_validation", + "result": "PASS", + "objective": "onap vnf openstack validation", + "sub_testcase": [], + "portal_key_file": "stack_report.json" + } + ] + } + +Examples +++++++++ + +Example VNFs and setup files have been created as a starting point for your +validation. + +* :download:`Passing Single Volume VNF using VNF API <input-VNF-API-pass-single_module.zip>` +* :download:`Failing Single Volume VNF using VNF API <input-VNF-API-fail-single_module.zip>` + +Additional Resources +++++++++++++++++++++ + +- `ONAP VVP Project <https://wiki.onap.org/display/DW/VNF+Validation+Program+Project>`_ + + +.. _tosca_vnf_validation: + +TOSCA-based VNF Testing +~~~~~~~~~~~~~~~~~~~~~~~ + +VNF Test Platform (VTP) provides an platform to on-board different test cases +required for OVP for various VNF testing provided by VNFSDK (for TOSCA) projects +in ONAP. And it generates the test case outputs which would be uploaded into +OVP portal for VNF badging. + +TOSCA VNF Test Environment +++++++++++++++++++++++++++ + +As pre-requestsite steps, it is assumed that, successful ONAP, Vendor VNFM and +OpenStack cloud are already available. Below installation steps help to setup +VTP components and CLI. + +.. image:: tosca_vnf_test_environment.png + :align: center + +Installation +++++++++++++ + +Clone the VNFSDK repo. + +.. code-block:: bash + + git clone --branch elalto https://git.onap.org/vnfsdk/refrepo + +Install the VTP by using script +``refrepo/vnfmarket-be/deployment/install/vtp_install.sh`` + +Follow the steps as below (in sequence): + +- ``vtp_install.sh --download``: It will download all required artifacts into + ``/opt/vtp_stage`` +- ``vtp_install.sh --install``: It will install VTP (``/opt/controller``) and + CLI (``/opt/oclip``) +- ``vtp_install.sh --start``: It will start VTP controller as Tomcat service + and CLI as ``oclip`` service +- ``vtp_install.sh --verify``: It will verify the setup is done properly by + running some test cases. + +Last step (verify) would check the health of VTP components and TOSCA VNF +compliance and validation test cases. + +Check Available Test Cases +++++++++++++++++++++++++++ + +VTP supports to check the compliance of VNF and PNF based on ONAP VNFRQTS. + +To check: + +- Go to command console +- Run command ``oclip`` +- Now it will provide a command prompt: + +``oclip:open-cli>`` + +Now run command as below and check the supported compliance test cases for +VNFRQTS. + +- ``csar-validate`` - Helps to validate given VNF CSAR for all configured + VNFRQTS. +- ``csar-validate-rxxx`` - Helps to validate given VNF CSAR for a given + VNFRQTS requirement number. + +.. code-block:: bash + + oclip:open-cli>schema-list --product onap-dublin --service vnf-compliance + +--------------+----------------+------------------------+--------------+----------+------+ + |product |service |command |ocs-version |enabled |rpc | + +--------------+----------------+------------------------+--------------+----------+------+ + |onap-dublin |vnf-compliance |csar-validate-r10087 |1.0 |true | | + +--------------+----------------+------------------------+--------------+----------+------+ + |onap-dublin |vnf-compliance |csar-validate |1.0 |true | | + +--------------+----------------+------------------------+--------------+----------+------+ + |onap-dublin |vnf-compliance |csar-validate-r26885 |1.0 |true | | + +--------------+----------------+------------------------+--------------+----------+------+ + |onap-dublin |vnf-compliance |csar-validate-r54356 |1.0 |true | | + ... + +To know the details of each VNFRQTS, run as below. + +.. code-block:: bash + + oclip:open-cli>use onap-dublin + oclip:onap-dublin>csar-validate-r54356 --help + usage: oclip csar-validate-r54356 + + Data types used by NFV node and is based on TOSCA/YAML constructs specified in draft GS NFV-SOL 001. + The node data definitions/attributes used in VNFD MUST comply. + +Now run command as below and check the supported validation testcases + +.. code-block:: bash + + oclip:onap-dublin>use open-cli + oclip:open-cli>schema-list --product onap-dublin --service vnf-validation + +--------------+----------------+----------------------+--------------+----------+------+ + |product |service |command |ocs-version |enabled |rpc | + +--------------+----------------+----------------------+--------------+----------+------+ + |onap-dublin |vnf-validation |vnf-tosca-provision |1.0 |true | | + +--------------+----------------+----------------------+--------------+----------+------+ + +Configure ONAP with required VNFM and cloud details ++++++++++++++++++++++++++++++++++++++++++++++++++++ + +**1. Setup the OCOMP profile onap-dublin** + +Run following command to configure the ONAP service URL and credentials as +given below, which will be used by VTP while executing the test cases + +.. code-block:: bash + + oclip:open-cli>use onap-dublin + oclip:onap-dublin>profile onap-dublin + oclip:onap-dublin>set sdc.onboarding:host-url=http://159.138.8.8:30280 + oclip:onap-dublin>set sdc.onboarding:host-username=cs0008 + oclip:onap-dublin>set sdc.onboarding:host-password=demo123456! + oclip:onap-dublin>set sdc.catalog:host-url=http://159.138.8.8:30205 + oclip:onap-dublin>set sdc.catalog:host-password=demo123456\! + oclip:onap-dublin>set sdc.catalog:host-username=cs0008 + oclip:onap-dublin>set sdc.catalog:service-model-approve:host-username=gv0001 + oclip:onap-dublin>set sdc.catalog:service-model-distribute:host-username=op0001 + oclip:onap-dublin>set sdc.catalog:service-model-test-start:host-username=jm0007 + oclip:onap-dublin>set sdc.catalog:service-model-test-accept:host-username=jm0007 + oclip:onap-dublin>set sdc.catalog:service-model-add-artifact:host-username=ocomp + oclip:onap-dublin>set sdc.catalog:vf-model-add-artifact:host-username=ocomp + oclip:onap-dublin>set aai:host-url=https://159.138.8.8:30233 + oclip:onap-dublin>set aai:host-username=AAI + oclip:onap-dublin>set aai:host-password=AAI + oclip:onap-dublin>set vfc:host-url=http://159.138.8.8:30280 + oclip:onap-dublin>set multicloud:host-url=http://159.138.8.8:30280 + +NOTE: Mostly all above entries value would be same except the IP address used +in the URL, which would be ONAP Kubernetes cluster IP. + +By default, SDC onboarding service does not provide node port, which is +available to access from external ONAP network. To enable for external access, +register the SDC onboarding service into MSB and use MSB url for +sdc.onboarding:host-url. + +.. code-block:: bash + + oclip:onap-dublin> microservice-create --service-name sdcob --service-version v1.0 --service-url /onboarding-api/v1.0 --path /onboarding-api/v1.0 --node-ip 172.16.1.0 --node-port 8081 + +NOTE: To find the node-ip and node-port, use the following steps. + +Find out SDC onboarding service IP and port details as given here: + +.. code-block:: bash + + [root@onap-dublin-vfw-93996-50c1z ~]# kubectl get pods -n onap -o wide | grep sdc-onboarding-be + dev-sdc-sdc-onboarding-be-5564b877c8-vpwr5 2/2 Running 0 29d 172.16.1.0 192.168.2.163 <none> <none> + dev-sdc-sdc-onboarding-be-cassandra-init-mtvz6 0/1 Completed 0 29d 172.16.0.220 192.168.2.163 <none> <none> + [root@onap-dublin-vfw-93996-50c1z ~]# + +Note down the IP address for sdc-onboarding-be 172.16.1.0 + +.. code-block:: bash + + [root@onap-dublin-vfw-93996-50c1z ~]# kubectl get services -n onap -o wide | grep sdc-onboarding-be + sdc-onboarding-be ClusterIP 10.247.198.92 <none> 8445/TCP,8081/TCP 29d app=sdc-onboarding-be,release=dev-sdc + [root@onap-dublin-vfw-93996-50c1z ~]# + +Note down the port for sdc-onboarding-be 8445 8081 + +Similarly, other service IP and Port could be discovered like above, in case not +know earlier :) + +Verify these details once by typing 'set' + +.. code-block:: bash + + oclip:onap-dublin> set + +This profile would be used by user while running the test cases with ONAP setup +configured in it, as below oclip --profile onap-dublin vnf-tosca-provision .... + +**2. Setup SDC consumer** + +SDC uses consumer concept to configure required VN model and service model +artifacts. So following commands required to run, which will create consumer +named ocomp, which is already configured in onap-dublin profile created in above +steps. + +.. code-block:: bash + + oclip --product onap-dublin --profile onap-dublin sdc-consumer-create --consumer-name ocomp + +NOTE: command oclip could be used in scripting mode as above or in interactive +mode as used in earlier steps + +**3. Update the cloud and vnfm driver details** + +In the configuration file /opt/oclip/conf/vnf-tosca-provision.json, update the +cloud and VNFM details. + +.. code-block:: json + + { "cloud": { + "identity-url": "http://10.12.11.1:5000/v3", + "username": "admin", + "password": "password", + "region": "RegionOVP", + "version": "ocata", + "tenant": "ocomp" + }, + "vnfm":{ + "hwvnfmdriver":{ + "version": "v1.0", + "url": "http://159.138.8.8:38088", + "username": "admin", + "password": "xxxx" + }, + "gvnfmdriver":{ + "version": "v1.0", + "url": "http://159.138.8.8:30280" + } + } + } + +**4.Configure the decided VNFRES (optional)** +VTP allows to configure the set of VNFRQTS to be considered while running the +VNF compliance test cases in the configuration file +``/opt/oclip/conf/VNFRQTS.properties.`` + +If not available, please create this file with following entries: + +.. code-block:: bash + + VNFRQTS.enabled=r02454,r04298,r07879,r09467,r13390,r23823,r26881,r27310,r35851,r40293,r43958,r66070,r77707,r77786,r87234,r10087,r21322,r26885,r40820,r35854,r65486,r17852,r46527,r15837,r54356,r67895,r95321,r32155,r01123,r51347,r787965,r130206 + pnfreqs.enabled=r10087,r87234,r35854,r15837,r17852,r293901,r146092,r57019,r787965,r130206 + # ignored all chef and ansible related tests + vnferrors.ignored= + pnferrors.ignored= + +Running the TOSCA VNF Test +++++++++++++++++++++++++++ + +Every test provided in VTP is given with guidelines on how to use it. On every +execution of test cases, use the following additional arguments based on +requirements + +- ``--product onap-dublin`` - It helps VTP choose the test cases written for + onap-dublin version +- ``--profile onap-dublin`` - It helps VTP to use the profile settings provided + by admin (optional) +- ``--request-id`` - It helps VTP to track the progress of the test cases + execution and user could use this id for same. (optional) + +So, final test case execution would be as below. To find the test case +arguments details, run second command below. + +.. code-block:: bash + + oclip --product onap-dublin --profile onap-dublin --request-id req-1 <test case name> <test case arguments> + oclip --product onap-dublin <test case name> --help + +Running TOSCA VNF Compliance Testing +++++++++++++++++++++++++++++++++++++ + +To run compliance test as below with given CSAR file + +.. clode-block:: bash + + oclip --product onap-dublin csar-validate --csar <csar file complete path> + +It will produce the result format as below: + +.. code-block:: json + + { + "date": "Fri Sep 20 17:34:24 CST 2019", + "criteria": "PASS", + "contact": "ONAP VTP Team onap-discuss@lists.onap.org", + "results": [ + { + "description": "V2.4.1 (2018-02)", + "passed": true, + "vnfreqName": "SOL004", + "errors": [] + }, + { + "description": "If the VNF or PNF CSAR Package utilizes Option 2 for package security, then the complete CSAR file MUST be digitally signed with the VNF or PNF provider private key. The VNF or PNF provider delivers one zip file consisting of the CSAR file, a signature file and a certificate file that includes the VNF or PNF provider public key. The certificate may also be included in the signature container, if the signature format allows that. The VNF or PNF provider creates a zip file consisting of the CSAR file with .csar extension, signature and certificate files. The signature and certificate files must be siblings of the CSAR file with extensions .cms and .cert respectively.\n", + "passed": true, + "vnfreqName": "r787965", + "errors": [] + } + ], + "platform": "VNFSDK - VNF Test Platform (VTP) 1.0", + "vnf": { + "mode": "WITH_TOSCA_META_DIR", + "vendor": "ONAP", + "name": null, + "type": "TOSCA", + "version": null + } + } + +In case of errors, the errors section will have list of details as below. Each +error block, will be given with error code and error details. Error code would +be very useful to provide the troubleshooting guide in future. Note, to +generate the test result in OVP archieve format, its recommended to run this +compliance test with request-id similar to running validation test as below. + +.. code-block:: bash + + [ + { + "vnfreqNo": "R66070", + "code": "0x1000", + "message": "MissinEntry-Definitions file", + "lineNumber": -1 + } + ] + +Running TOSCA VNF Validation Testing +++++++++++++++++++++++++++++++++++++ + +VTP provides validation test case with following modes: + +.. image:: tosca_vnf_test_flow.png + :align: center + + +* **setup**: Create requires Vendor, Service Subscription and VNF cloud in + ONAP +* **standup**: From the given VSP csar, VNF csar and NS csar, it creates VF + Model, NS Model and NS service +* **cleanup**: Remove those entries created during provision +* **provision**: Runs setup -> standup +* **validate**: Runs setup -> standup -> cleanup +* **checkup**: mode helps to verify automation is deployed properly. + +For OVP badging, validate mode would be used as below: + +.. code-block:: bash + + oclip --request-id WkVVu9fD--product onap-dublin --profile onap-dublin vnf-tosca-provision --vsp <vsp csar> --vnf-csar <v + +Validation testing would take for a while to complete the test execution, so +user could use the above given ``request-id``, to tracking the progress as +below: + +.. code-block:: bash + + oclip execution-list --request-id WkVVu9fD + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |request-id |execution-id |product |service |command |profile |status |start-time |end-time | + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |WkVVu9fD |WkVVu9fD-1568731678753 |onap-dublin |vnf-validation |vnf-tosca-provision | |in-progress |2019-09-17T14:47:58.000 | | + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |WkVVu9fD |WkVVu9fD-1568731876397 |onap-dublin |sdc.catalog |service-model-test-request |onap-dublin |in-progress |2019-09-17T14:51:16.000 | | + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |WkVVu9fD |WkVVu9fD-1568731966966 |onap-dublin |sdc.onboarding |vsp-archive |onap-dublin |completed |2019-09-17T14:52:46.000 |2019-09-17T14:52:47.000 | + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |WkVVu9fD |WkVVu9fD-1568731976982 |onap-dublin |aai |subscription-delete |onap-dublin |completed |2019-09-17T14:52:56.000 |2019-09-17T14:52:57.000 | + +------------+------------------------+--------------+------------------+------------------------------+--------------+------------+--------------------------+--------------------------+ + |WkVVu9fD |WkVVu9fD-1568731785780 |onap-dublin |aai |vnfm-create |onap-dublin |completed |2019-09-17T14:49:45.000 |2019-09-17T14:49:46.000 | + ...... + +While executing the test cases, VTP provides unique execution-id (2nd column) +for each step. As you note in the example above, some steps are in-progress, +while others are completed already. If there is error then status will be set +to failed. + +To find out the foot-print of each step, following commands are available: + +.. code-block:: bash + + oclip execution-show-out --execution-id WkVVu9fD-1568731785780 - Reports the standard output logs + oclip execution-show-err --execution-id WkVVu9fD-1568731785780 - Reports the standard error logs + oclip execution-show-debug --execution-id WkVVu9fD-1568731785780 - Reports the debug details like HTTP request and responseoclip execution-show --execution-id WkVVu9fD-1568731785780 - Reports the complete foot-print of inputs, outputs of steps + +Track the progress of the vnf-tosca-provision test cases until its completed. +Then the out of the validation test cases could be retrieved as below: + +.. code-block:: bash + + oclip execution-show --execution-id WkVVu9fD-1568731678753 - use vnf tosca test case execution id here + +It will provides the output format as below: + +.. code-block:: json + + { + "output": { + "ns-id": null, + "vnf-id": "", + "vnfm-driver": "hwvnfmdriver", + "vnf-vendor-name": "huawei", + "onap-objects": { + "ns_instance_id": null, + "tenant_version": null, + "service_type_id": null, + "tenant_id": null, + "subscription_version": null, + "esr_vnfm_id": null, + "location_id": null, + "ns_version": null, + "vnf_status": "active", + "entitlement_id": null, + "ns_id": null, + "cloud_version": null, + "cloud_id": null, + "vlm_version": null, + "esr_vnfm_version": null, + "vlm_id": null, + "vsp_id": null, + "vf_id": null, + "ns_instance_status": "active", + "service_type_version": null, + "ns_uuid": null, + "location_version": null, + "feature_group_id": null, + "vf_version": null, + "vsp_version": null, + "agreement_id": null, + "vf_uuid": null, + "ns_vf_resource_id": null, + "vsp_version_id": null, + "customer_version": null, + "vf_inputs": null, + "customer_id": null, + "key_group_id": null, + }, + "vnf-status": "active", + "vnf-name": "vgw", + "ns-status": "active" + }, + "input": { + "mode": "validate", + "vsp": "/tmp/data/vtp-tmp-files/1568731645518.csar", + "vnfm-driver": "hwvnfmdriver", + "config-json": "/opt/oclip/conf/vnf-tosca-provision.json", + "vnf-vendor-name": "huawei", + "ns-csar": "/tmp/data/vtp-tmp-files/1568731660745.csar", + "onap-objects": "{}", + "timeout": "600000", + "vnf-name": "vgw", + "vnf-csar": "/tmp/data/vtp-tmp-files/1568731655310.csar" + }, + "product": "onap-dublin", + "start-time": "2019-09-17T14:47:58.000", + "service": "vnf-validation", + "end-time": "2019-09-17T14:53:46.000", + "request-id": "WkVVu9fD-1568731678753", + "command": "vnf-tosca-provision", + "status": "completed" + } + +Reporting Results ++++++++++++++++++ + +VTP provides translation tool to migrate the VTP result into OVP portal format +and generates the tar file for the given test case execution. Please refer +`<https://github.com/onap/vnfsdk-refrepo/tree/master/vnfmarket-be/deployment/vtp2ovp>`_ +for more details. + +Once tar is generated, it can be used to submit into OVP portal +`<https://vnf-verified.lfnetworking.org/>`_ + +.. References +.. _`OVP VNF portal`: https://vnf-verified.lfnetworking.org diff --git a/docs/Chapter8/index.rst b/docs/Chapter8/index.rst index 9f0390d..ddbf83c 100644 --- a/docs/Chapter8/index.rst +++ b/docs/Chapter8/index.rst @@ -26,3 +26,4 @@ Appendix Ansible-Playbook-Examples VES_Registraion_3_2.rst ves7_1spec.rst + OPNFV-Verified-Badging.rst diff --git a/docs/Chapter8/input-VNF-API-fail-single_module.zip b/docs/Chapter8/input-VNF-API-fail-single_module.zip Binary files differnew file mode 100644 index 0000000..69319eb --- /dev/null +++ b/docs/Chapter8/input-VNF-API-fail-single_module.zip diff --git a/docs/Chapter8/input-VNF-API-pass-single_module.zip b/docs/Chapter8/input-VNF-API-pass-single_module.zip Binary files differnew file mode 100644 index 0000000..7474183 --- /dev/null +++ b/docs/Chapter8/input-VNF-API-pass-single_module.zip diff --git a/docs/Chapter8/tosca_vnf_test_environment.png b/docs/Chapter8/tosca_vnf_test_environment.png Binary files differnew file mode 100644 index 0000000..78b3f74 --- /dev/null +++ b/docs/Chapter8/tosca_vnf_test_environment.png diff --git a/docs/Chapter8/tosca_vnf_test_flow.png b/docs/Chapter8/tosca_vnf_test_flow.png Binary files differnew file mode 100644 index 0000000..87dc8ec --- /dev/null +++ b/docs/Chapter8/tosca_vnf_test_flow.png |