diff options
author | 2018-07-31 15:22:28 -0700 | |
---|---|---|
committer | 2018-07-31 15:22:28 -0700 | |
commit | 39e6ac36f70ed89245ea94e5f6711542e077797c (patch) | |
tree | 0b7ad3ad7bfd05be7d405e05b830d317542903be /docs/Chapter7 | |
parent | d907908404fe0d7522544ad2d54989095b145ed8 (diff) |
[VNFRQTS] updating links in chapter 7
Change-Id: Ic6705e68077273b41844eeedcdf3abcf5ffadf08
Issue-ID: VNFRQTS-250
Signed-off-by: stark, steven <ss820f@att.com>
Diffstat (limited to 'docs/Chapter7')
-rwxr-xr-x[-rw-r--r--] | docs/Chapter7/Configuration-Management.rst | 52 | ||||
-rwxr-xr-x[-rw-r--r--] | docs/Chapter7/Monitoring-And-Management.rst | 10 | ||||
-rwxr-xr-x[-rw-r--r--] | docs/Chapter7/Service-Design.rst | 0 | ||||
-rwxr-xr-x[-rw-r--r--] | docs/Chapter7/VNF-On-boarding-and-package-management.rst | 4 | ||||
-rwxr-xr-x[-rw-r--r--] | docs/Chapter7/index.rst | 0 |
5 files changed, 33 insertions, 33 deletions
diff --git a/docs/Chapter7/Configuration-Management.rst b/docs/Chapter7/Configuration-Management.rst index 225e8be..a06fc21 100644..100755 --- a/docs/Chapter7/Configuration-Management.rst +++ b/docs/Chapter7/Configuration-Management.rst @@ -20,7 +20,7 @@ This section describes the list of commands that should be supported by the VNF. The following sections describe the standard protocols that are supported (NETCONF, Chef, Ansible, and REST). -The commands below are expected to be supported on all VNF’s, unless +The commands below are expected to be supported on all VNF's, unless noted otherwise, either directly (via the NETCONF or REST interface) or indirectly (via a Chef Cookbook or Ansible server). Note that there are additional commands offered to northbound clients that are not shown @@ -68,7 +68,7 @@ the VNF is not in service (i.e., in a maintenance state). **ConfigScaleOut**: The Controller client is requesting that a configuration be applied after the VNF instance has been scaled out (i.e., one or more -additional VM’s instantiated to increase capacity). For some VNF’s, +additional VM's instantiated to increase capacity). For some VNF's, ConfigScaleOut is not needed because the VNF is auto-configured after scale-out. This command is being introduced in the Beijing release. @@ -318,7 +318,7 @@ NETCONF and REST require the VNF to implement a server which supports the RPC or REST calls. Ansible and Chef require the use of a Ansible or Chef server which communicates -with the Controller (northbound) and the VNF VM’s (southbound). +with the Controller (northbound) and the VNF VM's (southbound). The vendor must select which protocol to support for the commands listed above. Notes: @@ -332,9 +332,9 @@ Notes: Additional details can be found in the -`ONAP Application Controller (APPC) API Guide <http://onap.readthedocs.io/en/latest/submodules/appc.git/docs/APPC%20API%20Guide/APPC%20API%20Guide.html>`_, -`ONAP VF-C project <http://onap.readthedocs.io/en/latest/submodules/vfc/nfvo/lcm.git/docs/index.html>`_ and -the `ONAP SDNC project <http://onap.readthedocs.io/en/latest/submodules/sdnc/northbound.git/docs/index.html>`_. +`ONAP Application Controller (APPC) API Guide <https://onap.readthedocs.io/en/latest/submodules/appc.git/docs/index.html>`_, +`ONAP VF-C project <https://onap.readthedocs.io/en/latest/submodules/vfc/nfvo/lcm.git/docs/index.html>`_ and +the `ONAP SDNC project <https://onap.readthedocs.io/en/latest/submodules/sdnc/oam.git/docs/index.html>`_. NETCONF Standards and Capabilities ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -1000,7 +1000,7 @@ requirements and guidelines defined in this section. The Chef configuration management mechanism follows a client-server model. It requires the presence of a Chef-Client on the VNF that will be directly managed by a Chef Server. The Chef-client will register with -the appropriate Chef Server and are managed via ‘cookbooks’ and +the appropriate Chef Server and are managed via 'cookbooks' and configuration attributes loaded on the Chef Server which contain all necessary information to execute the appropriate actions on the VNF via the Chef-client. @@ -1172,15 +1172,15 @@ action request against a Chef managed VNF. 1. When ONAP receives a request for an action for a Chef Managed VNF, it retrieves the corresponding template (based on **action** and **VNF)** from its database and sets necessary values in the - “Environment”, “Node” and “NodeList” keys (if present) from either + "Environment", "Node" and "NodeList" keys (if present) from either the payload of the received action or internal data. -2. If “Environment” key is present in the updated template, it posts the +2. If "Environment" key is present in the updated template, it posts the corresponding JSON dictionary to the appropriate Environment object REST endpoint on the Chef Server thus updating the Environment attributes on the Chef Server. -3. Next, it creates a Node Object from the “Node” JSON dictionary for +3. Next, it creates a Node Object from the "Node" JSON dictionary for all elements listed in the NodeList (using the FQDN to construct the endpoint) by replicating it [#7.3.2]_. As part of this process, it will set the name field in each Node Object to the corresponding FQDN. @@ -1188,7 +1188,7 @@ action request against a Chef managed VNF. corresponding Node Object REST endpoints to update the corresponding node attributes. -4. If PushJobFlag is set to “True” in the template, ONAP requests a push +4. If PushJobFlag is set to "True" in the template, ONAP requests a push job against all the nodes in the NodeList to trigger chef-client\ **.** It will not invoke any other command via the push job. ONAP will include a callback URL in the push job request and a @@ -1209,13 +1209,13 @@ action request against a Chef managed VNF. 5. If CallbackCapable field in the template is not present or set to - “False” ONAP will poll the Chef Server to check completion status of + "False" ONAP will poll the Chef Server to check completion status of the push job. -6. If “GetOutputFlag” is set to “True” in the template and - CallbackCapable is not set to “True”, ONAP will retrieve any output +6. If "GetOutputFlag" is set to "True" in the template and + CallbackCapable is not set to "True", ONAP will retrieve any output from each node where the push job has finished by accessing the Node - Object attribute node[‘PushJobOutput’]. + Object attribute node['PushJobOutput']. Ansible Standards and Capabilities ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -1224,7 +1224,7 @@ ONAP will support configuration of VNFs via Ansible subject to the requirements and guidelines defined in this section. Ansible allows agentless management of VNFs/VMs/VNFCs via execution -of ‘playbooks’ over ssh. The ‘playbooks’ are a structured set of +of 'playbooks' over ssh. The 'playbooks' are a structured set of tasks which contain all the necessary resources and execution capabilities to take the necessary action on one or more target VMs (and/or VNFCs) of the VNF. ONAP will utilize the framework of an Ansible Server that @@ -1352,9 +1352,9 @@ complete the desired action. generic templates. The Ansible Server will determine if a playbook invoked to execute a -xNF action finished successfully or not using the “PLAY_RECAP” summary +xNF action finished successfully or not using the "PLAY_RECAP" summary in Ansible log. The playbook will be considered to successfully finish -only if the “PLAY RECAP” section at the end of playbook execution output +only if the "PLAY RECAP" section at the end of playbook execution output has no unreachable hosts and no failed tasks. Otherwise, the playbook will be considered to have failed. @@ -1467,7 +1467,7 @@ already processing service requests successfully. A successful execution of a health-check playbook shall also create one file per VNF VM, named after the VNF instance name followed by -“_results.txt (<vnf_instance>_results.txt) to indicate health-check was +"_results.txt (<vnf_instance>_results.txt) to indicate health-check was executed and completed successfully, example: vfdb9904v_results.txt, with the following contents: @@ -1500,7 +1500,7 @@ need attention even if they do not impact services provided by the VNF. A failed health-check playbook shall also create one file per VNF, named after the VNF instance name, followed by -“_results.txt to indicate health-check was executed and found issues +"_results.txt to indicate health-check was executed and found issues in the health of the VNF. This is to differentiate from failure to run health-check playbook or playbook tasks to verify the health of the VNF, example: vfdb9904v_results.txt, with the following contents: @@ -1586,7 +1586,7 @@ Table 8. ONAP Controller APIs and NETCONF Commands | | |a VNF and place it |Ansible server in | | | |in the respective |a manner aligned | | | |Node Objects |with playbook | -| | |‘PushJobOutput’ |requirements listed | +| | |'PushJobOutput' |requirements listed | | | |attribute of all |in this document. | | | |nodes in NodeList | | | | |when triggered |The PlaybookName | @@ -1596,10 +1596,10 @@ Table 8. ONAP Controller APIs and NETCONF Commands | | |The JSON file for |NodeList must list | | | |this VNF action is |IP addresses or DNS | | | |required to set |supported FQDNs of | -| | |“PushJobFlag” to |an example VNF | -| | |“True” and |on which to | -| | |“GetOutputFlag” to |execute playbook. | -| | |“True”. The “Node” | | +| | |"PushJobFlag" to |an example VNF | +| | |"True" and |on which to | +| | |"GetOutputFlag" to |execute playbook. | +| | |"True". The "Node" | | | | |JSON dictionary | | | | |must have the run | | | | |list populated | | @@ -1666,7 +1666,7 @@ Table 8. ONAP Controller APIs and NETCONF Commands .. [#7.3.2] Recall that the Node Object **is required** to be identical across - all VMs of a VNF invoked as part of the action except for the “name”. + all VMs of a VNF invoked as part of the action except for the "name". .. [#7.3.3] Upstream elements must provide the appropriate FQDN in the request to diff --git a/docs/Chapter7/Monitoring-And-Management.rst b/docs/Chapter7/Monitoring-And-Management.rst index 3265e96..6fe3d75 100644..100755 --- a/docs/Chapter7/Monitoring-And-Management.rst +++ b/docs/Chapter7/Monitoring-And-Management.rst @@ -7,7 +7,7 @@ Monitoring & Management This section addresses data collection and event processing functionality that is directly dependent on the interfaces -provided by the VNFs’ APIs. These can be in the form of asynchronous +provided by the VNFs' APIs. These can be in the form of asynchronous interfaces for event, fault notifications, and autonomous data streams. They can also be synchronous interfaces for on-demand requests to retrieve various performance, usage, and other event information. @@ -36,7 +36,7 @@ Streaming (VES) specifications. While this document is focused on specifying some of the records from the ONAP perspective, there may be other external bodies using the same framework to specify additional records. For example, OPNFV has a VES project that is looking to specify -records for OpenStack’s internal telemetry to manage Application (VNFs), +records for OpenStack's internal telemetry to manage Application (VNFs), physical and virtual infrastructure (compute, storage, network devices), and virtual infrastructure managers (cloud controllers, SDN controllers). Note that any configurable parameters for these data records (e.g., @@ -195,7 +195,7 @@ Data Structure Specification of the Event Record For additional information on the event record formats of the data structures mentioned above, please refer to `VES Event -Listener <https://github.com/att/evel-test-collector/tree/master/docs/att_interface_definition>`__. +Listener <https://onap.readthedocs.io/en/latest/submodules/vnfsdk/model.git/docs/files/VESEventListener.html>`__. Transports and Protocols Supporting Resource Interfaces ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -208,7 +208,7 @@ synchronous communications over secure connections. The specified encoding provides self-documenting content, so data fields can be changed as needs evolve, while minimizing changes to data delivery. -The term ‘Event Record’ is used throughout this document to represent +The term 'Event Record' is used throughout this document to represent various forms of telemetry or instrumentation made available by the VNF including, faults, status events, various other types of VNF measurements and logs. Headers received by themselves must be used @@ -332,7 +332,7 @@ Note: if Google Protocol Buffers are employed for delivery of VNF telemetry, Key-Value Google Protocol Buffers (KV-GPB) is the preferred serialization method. Details of specifications and versioning corresponding to a release can be found at: -`VES Event Listener <https://github.com/att/evel-test-collector/tree/master/docs/att_interface_definition>`__. +`VES Event Listener <https://onap.readthedocs.io/en/latest/submodules/vnfsdk/model.git/docs/files/VESEventListener.html>`__. Note: While supporting the VNF telemetry delivery approach described above, we are still leveraging the VES JSON based model in DCAE. The purpose of diff --git a/docs/Chapter7/Service-Design.rst b/docs/Chapter7/Service-Design.rst index bb0f9f7..bb0f9f7 100644..100755 --- a/docs/Chapter7/Service-Design.rst +++ b/docs/Chapter7/Service-Design.rst diff --git a/docs/Chapter7/VNF-On-boarding-and-package-management.rst b/docs/Chapter7/VNF-On-boarding-and-package-management.rst index 26ecf8e..e923c02 100644..100755 --- a/docs/Chapter7/VNF-On-boarding-and-package-management.rst +++ b/docs/Chapter7/VNF-On-boarding-and-package-management.rst @@ -262,7 +262,7 @@ Resource Control Loop The xNF Package **MUST** include documentation which must include all events (fault, measurement for xNF Scaling, Syslogs, State Change - and Mobile Flow), that need to be collected at each VM, VNFC (defined in `VNF Guidelines <http://onap.readthedocs.io/en/latest/submodules/vnfrqts/guidelines.git/docs/vnf_guidelines/vnf_guidelines.html#a-glossary>`__ ) and for the overall xNF. + and Mobile Flow), that need to be collected at each VM, VNFC (defined in `VNF Guidelines <https://onap.readthedocs.io/en/latest/submodules/vnfrqts/guidelines.git/docs/vnf_guidelines/vnf_guidelines.html>`__ ) and for the overall xNF. .. req:: :id: R-27711 @@ -383,7 +383,7 @@ Resource Control Loop all of the xNF Event Records supported. The artifact should include reference to the specific release of the xNF Event Stream Common Event Data Model document it is based on. (e.g., - `VES Event Listener <https://github.com/att/evel-test-collector/tree/master/docs/att_interface_definition>`__) + `VES Event Listener <https://onap.readthedocs.io/en/latest/submodules/vnfsdk/model.git/docs/files/VESEventListener.html>`__) Compute, Network, and Storage Requirements ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/Chapter7/index.rst b/docs/Chapter7/index.rst index d8f7b33..d8f7b33 100644..100755 --- a/docs/Chapter7/index.rst +++ b/docs/Chapter7/index.rst |