diff options
author | 2018-07-19 21:28:26 +0000 | |
---|---|---|
committer | 2018-07-24 18:08:03 +0000 | |
commit | fef9d88a38e010813c322c0eab4e852b05867f60 (patch) | |
tree | 838d250d5700b297b09e2812dae831840e6172c7 /docs/Chapter7/Configuration-Management.rst | |
parent | 2fc6ebc537028f72788cf7b169970e1aa3ddfbb0 (diff) |
VNFRQTS - Updating requirements to new structure
Updating the requirements to use the newly developed RST directive
Removing Chapter 7 updates to see if build would work.
Change-Id: I43bffa2b6c0a15e6f2e179c00d39f4ee46c5a046
Issue-ID: VNFRQTS-245
Signed-off-by: Bozawglanian, Hagop (hb755d) <hb755d@att.com>
Diffstat (limited to 'docs/Chapter7/Configuration-Management.rst')
-rw-r--r-- | docs/Chapter7/Configuration-Management.rst | 1527 |
1 files changed, 1099 insertions, 428 deletions
diff --git a/docs/Chapter7/Configuration-Management.rst b/docs/Chapter7/Configuration-Management.rst index 075c005..34f6ecc 100644 --- a/docs/Chapter7/Configuration-Management.rst +++ b/docs/Chapter7/Configuration-Management.rst @@ -75,13 +75,48 @@ scale-out. This command is being introduced in the Beijing release. **Audit**: The Controller client is requesting that the current (last known configuration update) is audited against the running configuration on the VNF. -* R-20741 The xNF **MUST** support ONAP Controller’s **Configure** command. -* R-19366 The xNF **MUST** support ONAP Controller’s **ConfigModify** command. -* R-32981 The xNF **MUST** support ONAP Controller’s **ConfigBackup** command. -* R-48247 The xNF **MUST** support ONAP Controller’s **ConfigRestore** command. -* R-94084 The xNF **MUST** support ONAP Controller’s **ConfigScaleOut** - command. -* R-56385 The xNF **MUST** support ONAP Controller’s **Audit** command. + +.. req:: + :id: R-20741 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **Configure** command. + +.. req:: + :id: R-19366 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **ConfigModify** command. + +.. req:: + :id: R-32981 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **ConfigBackup** command. + +.. req:: + :id: R-48247 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **ConfigRestore** command. + +.. req:: + :id: R-94084 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **ConfigScaleOut** command. + +.. req:: + :id: R-56385 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **Audit** command. LifeCycle Management Related Commands ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -131,24 +166,69 @@ up prior to the UpgradeSoftware. is backed out (in the event that the SoftwareUpgrade or UpgradePostCheck failed). -* R-12706 The xNF **MUST** support ONAP Controller’s **QuiesceTraffic** - command. -* R-07251 The xNF **MUST** support ONAP Controller’s **ResumeTraffic** - command. -* R-83146 The xNF **MUST** support ONAP Controller’s **StopApplication** - command. -* R-82811 The xNF **MUST** support ONAP Controller’s **StartApplication** - command. -* R-19922 The xNF **MUST** support ONAP Controller’s **UpgradePrecheck** - command. -* R-49466 The xNF **MUST** support ONAP Controller’s **UpgradeSoftware** - command. -* R-45856 The xNF **MUST** support ONAP Controller’s **UpgradePostCheck** - command. -* R-97343 The xNF **MUST** support ONAP Controller’s **UpgradeBackup** - command. -* R-65641 The xNF **MUST** support ONAP Controller’s **UpgradeBackOut** - command. + +.. req:: + :id: R-12706 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **QuiesceTraffic** command. + +.. req:: + :id: R-07251 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **ResumeTraffic** command. + +.. req:: + :id: R-83146 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **StopApplication** command. + +.. req:: + :id: R-82811 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **StartApplication** command. + +.. req:: + :id: R-19922 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **UpgradePrecheck** command. + +.. req:: + :id: R-49466 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **UpgradeSoftware** command. + +.. req:: + :id: R-45856 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **UpgradePostCheck** command. + +.. req:: + :id: R-97343 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **UpgradeBackup** command. + +.. req:: + :id: R-65641 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **UpgradeBackOut** command. Virtual Function - Container Recovery Requirements ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -167,21 +247,43 @@ without having to rebuild entire VNFs or even entire sites these basic recovery capabilities of individual containers, Virtual Machines or other, must be supported. -* R-11790 The VNF **MUST** support ONAP Controller’s - **Restart (stop/start or reboot)** command. -* R-56218 The VNF **MUST** support ONAP Controller’s Migrate command that - moves container (VM) from a live Physical Server / Compute Node to - another live Physical Server / Compute Node. -NOTE: Container migrations MUST be transparent to the VNF and no more -intrusive than a stop, followed by some down time for the migration to -be performed from one Compute Node / Physical Server to another, followed -by a start of the same VM with same configuration on the new Compute -Node / Physical Server. +.. req:: + :id: R-11790 + :target: VNF + :keyword: MUST + + The VNF **MUST** support ONAP Controller's + **Restart (stop/start or reboot)** command. + +.. req:: + :id: R-56218 + :target: VNF + :keyword: MUST + + The VNF **MUST** support ONAP Controller's Migrate command that + moves container (VM) from a live Physical Server / Compute Node to + another live Physical Server / Compute Node. + + Note: Container migrations MUST be transparent to the VNF and no more intrusive than a stop, + followed by some down time for the migration to be performed from one Compute Node / Physical + Server to another, followed by a start of the same VM with same configuration on the new + Compute Node / Physical Server. -* R-38001 The VNF MUST support ONAP Controller’s **Rebuild** command. -* R-76901 VNF MUST support a container rebuild mechanism based on existing - image (e.g. Glance image in Openstack environment) or a snapshot. +.. req:: + :id: R-38001 + :target: VNF + :keyword: MUST + + The VNF **MUST** support ONAP Controller's **Rebuild** command. + +.. req:: + :id: R-76901 + :target: VNF + :keyword: MUST + + The VNF **MUST** support a container rebuild mechanism based on existing + image (e.g. Glance image in Openstack environment) or a snapshot. HealthCheck and Failure Related Commands ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -197,8 +299,13 @@ Openstack failure recovery related commands that are executed on-demand or via Control Loop at the VM level. The VNF must support these commands in a fully automated fashion. -* R-41430 The xNF **MUST** support ONAP Controller’s **HealthCheck** - command. + +.. req:: + :id: R-41430 + :target: XNF + :keyword: MUST + + The xNF **MUST** support ONAP Controller's **HealthCheck** command. Notes On Command Support Using Controller Southbound Protocols ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -224,7 +331,10 @@ Notes: * REST is specified as an option only for the HealthCheck. -Additional details can be found in the `ONAP Application Controller (APPC) API Guide <http://onap.readthedocs.io/en/latest/submodules/appc.git/docs/APPC%20API%20Guide/APPC%20API%20Guide.html>`_, `ONAP VF-C project <http://onap.readthedocs.io/en/latest/submodules/vfc/nfvo/lcm.git/docs/index.html>`_ and the `ONAP SDNC project <http://onap.readthedocs.io/en/latest/submodules/sdnc/northbound.git/docs/index.html>`_. +Additional details can be found in the +`ONAP Application Controller (APPC) API Guide <http://onap.readthedocs.io/en/latest/submodules/appc.git/docs/APPC%20API%20Guide/APPC%20API%20Guide.html>`_, +`ONAP VF-C project <http://onap.readthedocs.io/en/latest/submodules/vfc/nfvo/lcm.git/docs/index.html>`_ and +the `ONAP SDNC project <http://onap.readthedocs.io/en/latest/submodules/sdnc/northbound.git/docs/index.html>`_. NETCONF Standards and Capabilities ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -241,203 +351,577 @@ VNF Configuration via NETCONF Requirements Configuration Management +++++++++++++++++++++++++++ -* R-88026 The xNF **MUST** include a NETCONF server enabling - runtime configuration and lifecycle management capabilities. -* R-95950 The xNF **MUST** provide a NETCONF interface fully defined - by supplied YANG models for the embedded NETCONF server. + +.. req:: + :id: R-88026 + :target: XNF + :keyword: MUST + + The xNF **MUST** include a NETCONF server enabling + runtime configuration and lifecycle management capabilities. + +.. req:: + :id: R-95950 + :target: XNF + :keyword: MUST + + The xNF **MUST** provide a NETCONF interface fully defined + by supplied YANG models for the embedded NETCONF server. NETCONF Server Requirements ++++++++++++++++++++++++++++++ -* R-73468 The xNF **MUST** allow the NETCONF server connection - parameters to be configurable during virtual machine instantiation - through Heat templates where SSH keys, usernames, passwords, SSH - service and SSH port numbers are Heat template parameters. -* R-90007 The xNF **MUST** implement the protocol operation: - **close-session()**- Gracefully close the current session. -* R-70496 The xNF **MUST** implement the protocol operation: - **commit(confirmed, confirm-timeout)** - Commit candidate - configuration datastore to the running configuration. -* R-18733 The xNF **MUST** implement the protocol operation: - **discard-changes()** - Revert the candidate configuration - datastore to the running configuration. -* R-44281 The xNF **MUST** implement the protocol operation: - **edit-config(target, default-operation, test-option, error-option, - config)** - Edit the target configuration datastore by merging, - replacing, creating, or deleting new config elements. -* R-60106 The xNF **MUST** implement the protocol operation: - **get(filter)** - Retrieve (a filtered subset of) the running - configuration and device state information. This should include - the list of xNF supported schemas. -* R-29488 The xNF **MUST** implement the protocol operation: - **get-config(source, filter)** - Retrieve a (filtered subset of - a) configuration from the configuration datastore source. -* R-11235 The xNF **MUST** implement the protocol operation: - **kill-session(session)** - Force the termination of **session**. -* R-02597 The xNF **MUST** implement the protocol operation: - **lock(target)** - Lock the configuration datastore target. -* R-96554 The xNF **MUST** implement the protocol operation: - **unlock(target)** - Unlock the configuration datastore target. -* R-29324 The xNF **SHOULD** implement the protocol operation: - **copy-config(target, source) -** Copy the content of the - configuration datastore source to the configuration datastore target. -* R-88031 The xNF **SHOULD** implement the protocol operation: - **delete-config(target) -** Delete the named configuration - datastore target. -* R-97529 The xNF **SHOULD** implement the protocol operation: - **get-schema(identifier, version, format) -** Retrieve the YANG schema. -* R-62468 The xNF **MUST** allow all configuration data to be - edited through a NETCONF <edit-config> operation. Proprietary - NETCONF RPCs that make configuration changes are not sufficient. -* R-01382 The xNF **MUST** allow the entire configuration of the - xNF to be retrieved via NETCONF's <get-config> and <edit-config>, - independently of whether it was configured via NETCONF or other - mechanisms. -* R-28756 The xNF **MUST** support **:partial-lock** and - **:partial-unlock** capabilities, defined in RFC 5717. This - allows multiple independent clients to each write to a different - part of the <running> configuration at the same time. -* R-83873 The xNF **MUST** support **:rollback-on-error** value for - the <error-option> parameter to the <edit-config> operation. If any - error occurs during the requested edit operation, then the target - database (usually the running configuration) will be left unaffected. - This provides an 'all-or-nothing' edit mode for a single <edit-config> - request. -* R-68990 The xNF **MUST** support the **:startup** capability. It - will allow the running configuration to be copied to this special - database. It can also be locked and unlocked. -* R-68200 The xNF **MUST** support the **:url** value to specify - protocol operation source and target parameters. The capability URI - for this feature will indicate which schemes (e.g., file, https, sftp) - that the server supports within a particular URL value. The 'file' - scheme allows for editable local configuration databases. The other - schemes allow for remote storage of configuration databases. -* R-20353 The xNF **MUST** implement both **:candidate** and - **:writable-running** capabilities. When both **:candidate** and - **:writable-running** are provided then two locks should be supported. -* R-11499 The xNF **MUST** fully support the XPath 1.0 specification - for filtered retrieval of configuration and other database contents. - The 'type' attribute within the <filter> parameter for <get> and - <get-config> operations may be set to 'xpath'. The 'select' attribute - (which contains the XPath expression) will also be supported by the - server. A server may support partial XPath retrieval filtering, but - it cannot advertise the **:xpath** capability unless the entire XPath - 1.0 specification is supported. -* R-83790 The xNF **MUST** implement the **:validate** capability -* R-49145 The xNF **MUST** implement **:confirmed-commit** If - **:candidate** is supported. -* R-58358 The xNF **MUST** implement the **:with-defaults** capability - [RFC6243]. -* R-59610 The xNF **MUST** implement the data model discovery and - download as defined in [RFC6022]. -* R-93443 The xNF **MUST** define all data models in YANG [RFC6020], - and the mapping to NETCONF shall follow the rules defined in this RFC. -* R-26115 The xNF **MUST** follow the data model upgrade rules defined - in [RFC6020] section 10. All deviations from section 10 rules shall - be handled by a built-in automatic upgrade mechanism. -* R-10716 The xNF **MUST** support parallel and simultaneous - configuration of separate objects within itself. -* R-29495 The xNF **MUST** support locking if a common object is - being manipulated by two simultaneous NETCONF configuration operations - on the same xNF within the context of the same writable running data - store (e.g., if an interface parameter is being configured then it - should be locked out for configuration by a simultaneous configuration - operation on that same interface parameter). -* R-53015 The xNF **MUST** apply locking based on the sequence of - NETCONF operations, with the first configuration operation locking - out all others until completed. -* R-02616 The xNF **MUST** permit locking at the finest granularity - if a xNF needs to lock an object for configuration to avoid blocking - simultaneous configuration operations on unrelated objects (e.g., BGP - configuration should not be locked out if an interface is being - configured or entire Interface configuration should not be locked out - if a non-overlapping parameter on the interface is being configured). -* R-41829 The xNF **MUST** be able to specify the granularity of the - lock via a restricted or full XPath expression. -* R-66793 The xNF **MUST** guarantee the xNF configuration integrity - for all simultaneous configuration operations (e.g., if a change is - attempted to the BUM filter rate from multiple interfaces on the same - EVC, then they need to be sequenced in the xNF without locking either - configuration method out). -* R-54190 The xNF **MUST** release locks to prevent permanent lock-outs - when/if a session applying the lock is terminated (e.g., SSH session - is terminated). -* R-03465 The xNF **MUST** release locks to prevent permanent lock-outs - when the corresponding <partial-unlock> operation succeeds. -* R-63935 The xNF **MUST** release locks to prevent permanent lock-outs - when a user configured timer has expired forcing the NETCONF SSH Session - termination (i.e., product must expose a configuration knob for a user - setting of a lock expiration timer) -* R-10173 The xNF **MUST** allow another NETCONF session to be able to - initiate the release of the lock by killing the session owning the lock, - using the <kill-session> operation to guard against hung NETCONF sessions. -* R-88899 The xNF **MUST** support simultaneous <commit> operations - within the context of this locking requirements framework. -* R-07545 The xNF **MUST** support all operations, administration and - management (OAM) functions available from the supplier for xNFs using - the supplied YANG code and associated NETCONF servers. -* R-60656 The xNF **MUST** support sub tree filtering. -* R-80898 The xNF **MUST** support heartbeat via a <get> with null filter. -* R-25238 The xNF PACKAGE **MUST** validated YANG code using the open - source pyang [1]_ program using the following commands: - -.. code-block:: python - - $ pyang --verbose --strict <YANG-file-name(s)> - $ echo $! - -* R-63953 The xNF **MUST** have the echo command return a zero value - otherwise the validation has failed -* R-26508 The xNF **MUST** support a NETCONF server that can be mounted on - OpenDaylight (client) and perform the operations of: modify, update, - change, rollback configurations using each configuration data element, - query each state (non-configuration) data element, execute each YANG - RPC, and receive data through each notification statement. +.. req:: + :id: R-73468 + :target: XNF + :keyword: MUST + + The xNF **MUST** allow the NETCONF server connection + parameters to be configurable during virtual machine instantiation + through Heat templates where SSH keys, usernames, passwords, SSH + service and SSH port numbers are Heat template parameters. + +.. req:: + :id: R-90007 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **close-session()**- Gracefully close the current session. + +.. req:: + :id: R-70496 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **commit(confirmed, confirm-timeout)** - Commit candidate + configuration datastore to the running configuration. + +.. req:: + :id: R-18733 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **discard-changes()** - Revert the candidate configuration + datastore to the running configuration. + +.. req:: + :id: R-44281 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **edit-config(target, default-operation, test-option, error-option, + config)** - Edit the target configuration datastore by merging, + replacing, creating, or deleting new config elements. + +.. req:: + :id: R-60106 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **get(filter)** - Retrieve (a filtered subset of) the running + configuration and device state information. This should include + the list of xNF supported schemas. + +.. req:: + :id: R-29488 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **get-config(source, filter)** - Retrieve a (filtered subset of + a) configuration from the configuration datastore source. + +.. req:: + :id: R-11235 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **kill-session(session)** - Force the termination of **session**. + +.. req:: + :id: R-02597 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **lock(target)** - Lock the configuration datastore target. + +.. req:: + :id: R-96554 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the protocol operation: + **unlock(target)** - Unlock the configuration datastore target. + +.. req:: + :id: R-29324 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** implement the protocol operation: + **copy-config(target, source) -** Copy the content of the + configuration datastore source to the configuration datastore target. + +.. req:: + :id: R-88031 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** implement the protocol operation: + **delete-config(target) -** Delete the named configuration + datastore target. + +.. req:: + :id: R-97529 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** implement the protocol operation: + **get-schema(identifier, version, format) -** Retrieve the YANG schema. + +.. req:: + :id: R-62468 + :target: XNF + :keyword: MUST + + The xNF **MUST** allow all configuration data to be + edited through a NETCONF <edit-config> operation. Proprietary + NETCONF RPCs that make configuration changes are not sufficient. + +.. req:: + :id: R-01382 + :target: XNF + :keyword: MUST + + The xNF **MUST** allow the entire configuration of the xNF to be + retrieved via NETCONF's <get-config> and <edit-config>, independently + of whether it was configured via NETCONF or other mechanisms. + +.. req:: + :id: R-28756 + :target: XNF + :keyword: MUST + + The xNF **MUST** support **:partial-lock** and + **:partial-unlock** capabilities, defined in RFC 5717. This + allows multiple independent clients to each write to a different + part of the <running> configuration at the same time. + +.. req:: + :id: R-83873 + :target: XNF + :keyword: MUST + + The xNF **MUST** support **:rollback-on-error** value for + the <error-option> parameter to the <edit-config> operation. If any + error occurs during the requested edit operation, then the target + database (usually the running configuration) will be left unaffected. + This provides an 'all-or-nothing' edit mode for a single <edit-config> + request. + +.. req:: + :id: R-68990 + :target: XNF + :keyword: MUST + + The xNF **MUST** support the **:startup** capability. It + will allow the running configuration to be copied to this special + database. It can also be locked and unlocked. + +.. req:: + :id: R-68200 + :target: XNF + :keyword: MUST + + The xNF **MUST** support the **:url** value to specify + protocol operation source and target parameters. The capability URI + for this feature will indicate which schemes (e.g., file, https, sftp) + that the server supports within a particular URL value. The 'file' + scheme allows for editable local configuration databases. The other + schemes allow for remote storage of configuration databases. + +.. req:: + :id: R-20353 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement both **:candidate** and + **:writable-running** capabilities. When both **:candidate** and + **:writable-running** are provided then two locks should be supported. + +.. req:: + :id: R-11499 + :target: XNF + :keyword: MUST + + The xNF **MUST** fully support the XPath 1.0 specification + for filtered retrieval of configuration and other database contents. + The 'type' attribute within the <filter> parameter for <get> and + <get-config> operations may be set to 'xpath'. The 'select' attribute + (which contains the XPath expression) will also be supported by the + server. A server may support partial XPath retrieval filtering, but + it cannot advertise the **:xpath** capability unless the entire XPath + 1.0 specification is supported. + +.. req:: + :id: R-83790 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the **:validate** capability. + +.. req:: + :id: R-49145 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement **:confirmed-commit** If + **:candidate** is supported. + +.. req:: + :id: R-58358 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the **:with-defaults** capability + [RFC6243]. + +.. req:: + :id: R-59610 + :target: XNF + :keyword: MUST + + The xNF **MUST** implement the data model discovery and + download as defined in [RFC6022]. + +.. req:: + :id: R-93443 + :target: XNF + :keyword: MUST + + The xNF **MUST** define all data models in YANG [RFC6020], + and the mapping to NETCONF shall follow the rules defined in this RFC. + +.. req:: + :id: R-26115 + :target: XNF + :keyword: MUST + + The xNF **MUST** follow the data model upgrade rules defined + in [RFC6020] section 10. All deviations from section 10 rules shall + be handled by a built-in automatic upgrade mechanism. + +.. req:: + :id: R-10716 + :target: XNF + :keyword: MUST + + The xNF **MUST** support parallel and simultaneous + configuration of separate objects within itself. + +.. req:: + :id: R-29495 + :target: XNF + :keyword: MUST + + The xNF **MUST** support locking if a common object is + being manipulated by two simultaneous NETCONF configuration operations + on the same xNF within the context of the same writable running data + store (e.g., if an interface parameter is being configured then it + should be locked out for configuration by a simultaneous configuration + operation on that same interface parameter). + +.. req:: + :id: R-53015 + :target: XNF + :keyword: MUST + + The xNF **MUST** apply locking based on the sequence of + NETCONF operations, with the first configuration operation locking + out all others until completed. + +.. req:: + :id: R-02616 + :target: XNF + :keyword: MUST + + The xNF **MUST** permit locking at the finest granularity + if a xNF needs to lock an object for configuration to avoid blocking + simultaneous configuration operations on unrelated objects (e.g., BGP + configuration should not be locked out if an interface is being + configured or entire Interface configuration should not be locked out + if a non-overlapping parameter on the interface is being configured). + +.. req:: + :id: R-41829 + :target: XNF + :keyword: MUST + + The xNF **MUST** be able to specify the granularity of the + lock via a restricted or full XPath expression. + +.. req:: + :id: R-66793 + :target: XNF + :keyword: MUST + + The xNF **MUST** guarantee the xNF configuration integrity + for all simultaneous configuration operations (e.g., if a change is + attempted to the BUM filter rate from multiple interfaces on the same + EVC, then they need to be sequenced in the xNF without locking either + configuration method out). + +.. req:: + :id: R-54190 + :target: XNF + :keyword: MUST + + The xNF **MUST** release locks to prevent permanent lock-outs + when/if a session applying the lock is terminated (e.g., SSH session + is terminated). + +.. req:: + :id: R-03465 + :target: XNF + :keyword: MUST + + The xNF **MUST** release locks to prevent permanent lock-outs + when the corresponding <partial-unlock> operation succeeds. + +.. req:: + :id: R-63935 + :target: XNF + :keyword: MUST + + The xNF **MUST** release locks to prevent permanent lock-outs + when a user configured timer has expired forcing the NETCONF SSH Session + termination (i.e., product must expose a configuration knob for a user + setting of a lock expiration timer). + +.. req:: + :id: R-10173 + :target: XNF + :keyword: MUST + + The xNF **MUST** allow another NETCONF session to be able to + initiate the release of the lock by killing the session owning the lock, + using the <kill-session> operation to guard against hung NETCONF sessions. + +.. req:: + :id: R-88899 + :target: XNF + :keyword: MUST + + The xNF **MUST** support simultaneous <commit> operations + within the context of this locking requirements framework. + +.. req:: + :id: R-07545 + :target: XNF + :keyword: MUST + + The xNF **MUST** support all operations, administration and + management (OAM) functions available from the supplier for xNFs using + the supplied YANG code and associated NETCONF servers. + +.. req:: + :id: R-60656 + :target: XNF + :keyword: MUST + + The xNF **MUST** support sub tree filtering. + +.. req:: + :id: R-80898 + :target: XNF + :keyword: MUST + + TThe xNF **MUST** support heartbeat via a <get> with null filter. + +.. req:: + :id: R-25238 + :target: VNF + :keyword: MUST + + The xNF PACKAGE **MUST** validated YANG code using the open + source pyang [1]_ program using the following commands: + + .. code-block:: python + + $ pyang --verbose --strict <YANG-file-name(s)> $ echo $! + +.. req:: + :id: R-63953 + :target: XNF + :keyword: MUST + + The xNF **MUST** have the echo command return a zero value + otherwise the validation has failed. + +.. req:: + :id: R-26508 + :target: XNF + :keyword: MUST + + The xNF **MUST** support a NETCONF server that can be mounted on + OpenDaylight (client) and perform the operations of: modify, update, + change, rollback configurations using each configuration data element, + query each state (non-configuration) data element, execute each YANG + RPC, and receive data through each notification statement. The following requirements provides the Yang models that suppliers must conform, and those where applicable, that suppliers need to use. -* R-28545 The xNF **MUST** conform its YANG model to RFC 6060, - “YANG - A Data Modeling Language for the Network Configuration - Protocol (NETCONF)” -* R-22700 The xNF **MUST** conform its YANG model to RFC 6470, - “NETCONF Base Notifications”. -* R-10353 The xNF **MUST** conform its YANG model to RFC 6244, - “An Architecture for Network Management Using NETCONF and YANG”. -* R-53317 The xNF **MUST** conform its YANG model to RFC 6087, - “Guidelines for Authors and Reviewers of YANG Data Model Documents”. -* R-33955 The xNF **SHOULD** conform its YANG model to RFC 6991, - “Common YANG Data Types”. -* R-22946 The xNF **SHOULD** conform its YANG model to RFC 6536, - “NETCONF Access Control Model”. -* R-10129 The xNF **SHOULD** conform its YANG model to RFC 7223, - “A YANG Data Model for Interface Management”. -* R-12271 The xNF **SHOULD** conform its YANG model to RFC 7223, - “IANA Interface Type YANG Module”. -* R-49036 The xNF **SHOULD** conform its YANG model to RFC 7277, - “A YANG Data Model for IP Management”. -* R-87564 The xNF **SHOULD** conform its YANG model to RFC 7317, - “A YANG Data Model for System Management”. -* R-24269 The xNF **SHOULD** conform its YANG model to RFC 7407, - “A YANG Data Model for SNMP Configuration”, if Netconf used to - configure SNMP engine. + +.. req:: + :id: R-28545 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform its YANG model to RFC 6060, + "YANG - A Data Modeling Language for the Network Configuration + Protocol (NETCONF)". + +.. req:: + :id: R-22700 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform its YANG model to RFC 6470, + "NETCONF Base Notifications". + +.. req:: + :id: R-10353 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform its YANG model to RFC 6244, + "An Architecture for Network Management Using NETCONF and YANG". + +.. req:: + :id: R-53317 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform its YANG model to RFC 6087, + "Guidelines for Authors and Reviewers of YANG Data Model Documents". + +.. req:: + :id: R-33955 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 6991, + "Common YANG Data Types". + +.. req:: + :id: R-22946 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 6536, + "NETCONF Access Control Model". + +.. req:: + :id: R-10129 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 7223, + "A YANG Data Model for Interface Management". + +.. req:: + :id: R-12271 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 7223, + "IANA Interface Type YANG Module". + +.. req:: + :id: R-49036 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 7277, + "A YANG Data Model for IP Management". + +.. req:: + :id: R-87564 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 7317, + "A YANG Data Model for System Management". + +.. req:: + :id: R-24269 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** conform its YANG model to RFC 7407, + "A YANG Data Model for SNMP Configuration", if Netconf used to + configure SNMP engine. The NETCONF server interface shall fully conform to the following NETCONF RFCs. -* R-33946 The xNF **MUST** conform to the NETCONF RFC 4741, - “NETCONF Configuration Protocol”. -* R-04158 The xNF **MUST** conform to the NETCONF RFC 4742, - “Using the NETCONF Configuration Protocol over Secure Shell (SSH)”. -* R-13800 The xNF **MUST** conform to the NETCONF RFC 5277, - “NETCONF Event Notification”. -* R-01334 The xNF **MUST** conform to the NETCONF RFC 5717, - “Partial Lock Remote Procedure Call”. -* R-08134 The xNF **MUST** conform to the NETCONF RFC 6241, - “NETCONF Configuration Protocol”. -* R-78282 The xNF **MUST** conform to the NETCONF RFC 6242, - “Using the Network Configuration Protocol over Secure Shell”. + +.. req:: + :id: R-33946 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 4741, + "NETCONF Configuration Protocol". + +.. req:: + :id: R-04158 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 4742, + "Using the NETCONF Configuration Protocol over Secure Shell (SSH)". + +.. req:: + :id: R-13800 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 5277, + "NETCONF Event Notification". + +.. req:: + :id: R-01334 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 5717, + "Partial Lock Remote Procedure Call". + +.. req:: + :id: R-08134 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 6241, + "NETCONF Configuration Protocol". + +.. req:: + :id: R-78282 + :target: XNF + :keyword: MUST + + The xNF **MUST** conform to the NETCONF RFC 6242, + "Using the Network Configuration Protocol over Secure Shell". VNF REST APIs ^^^^^^^^^^^^^^^ @@ -466,14 +950,20 @@ by the VNF provider. REST APIs ~~~~~~~~~ -* R-31809 The xNF **MUST** support the HealthCheck RPC. The HealthCheck - RPC executes a xNF Provider-defined xNF HealthCheck over the scope of - the entire xNF (e.g., if there are multiple VNFCs, then run a health check, - as appropriate, for all VNFCs). It returns a 200 OK if the test completes. - A JSON object is returned indicating state (healthy, unhealthy), scope - identifier, time-stamp and one or more blocks containing info and fault - information. If the xNF is unable to run the HealthCheck, return a - standard http error code and message. + +.. req:: + :id: R-31809 + :target: XNF + :keyword: MUST + + The xNF **MUST** support the HealthCheck RPC. The HealthCheck + RPC executes a xNF Provider-defined xNF HealthCheck over the scope of + the entire xNF (e.g., if there are multiple VNFCs, then run a health check, + as appropriate, for all VNFCs). It returns a 200 OK if the test completes. + A JSON object is returned indicating state (healthy, unhealthy), scope + identifier, time-stamp and one or more blocks containing info and fault + information. If the xNF is unable to run the HealthCheck, return a + standard http error code and message. Examples of responses when HealthCheck runs and is able to provide a healthy or unhealthy response: @@ -526,69 +1016,152 @@ VNF Configuration via Chef Requirements Chef Client Requirements +++++++++++++++++++++++++ -* R-79224 The xNF **MUST** have the chef-client be preloaded with - validator keys and configuration to register with the designated - Chef Server as part of the installation process. -* R-72184 The xNF **MUST** have routable FQDNs for all the endpoints - (VMs) of a xNF that contain chef-clients which are used to register - with the Chef Server. As part of invoking xNF actions, ONAP will - trigger push jobs against FQDNs of endpoints for a xNF, if required. -* R-47068 The xNF **MAY** expose a single endpoint that is - responsible for all functionality. -* R-67114 The xNF **MUST** be installed with Chef-Client >= 12.0 and - Chef push jobs client >= 2.0. + +.. req:: + :id: R-79224 + :target: XNF + :keyword: MUST + + The xNF **MUST** have the chef-client be preloaded with + validator keys and configuration to register with the designated + Chef Server as part of the installation process. + +.. req:: + :id: R-72184 + :target: XNF + :keyword: MUST + + The xNF **MUST** have routable FQDNs for all the endpoints + (VMs) of a xNF that contain chef-clients which are used to register + with the Chef Server. As part of invoking xNF actions, ONAP will + trigger push jobs against FQDNs of endpoints for a xNF, if required. + +.. req:: + :id: R-47068 + :target: XNF + :keyword: MAY + + The xNF **MAY** expose a single endpoint that is + responsible for all functionality. + +.. req:: + :id: R-67114 + :target: VNF + :keyword: MUST + + The xNF **MUST** be installed with Chef-Client >= 12.0 and Chef + push jobs client >= 2.0. Chef Roles/Requirements ++++++++++++++++++++++++++ -* R-27310 The xNF Package **MUST** include all relevant Chef artifacts - (roles/cookbooks/recipes) required to execute xNF actions requested by - ONAP for loading on appropriate Chef Server. -* R-26567 The xNF Package **MUST** include a run list of - roles/cookbooks/recipes, for each supported xNF action, that will - perform the desired xNF action in its entirety as specified by ONAP - (see Section 7.c, ONAP Controller APIs and Behavior, for list of xNF - actions and requirements), when triggered by a chef-client run list - in JSON file. -* R-98911 The xNF **MUST NOT** use any instance specific parameters - for the xNF in roles/cookbooks/recipes invoked for a xNF action. -* R-37929 The xNF **MUST** accept all necessary instance specific - data from the environment or node object attributes for the xNF - in roles/cookbooks/recipes invoked for a xNF action. -* R-62170 The xNF **MUST** over-ride any default values for - configurable parameters that can be set by ONAP in the roles, - cookbooks and recipes. -* R-78116 The xNF **MUST** update status on the Chef Server - appropriately (e.g., via a fail or raise an exception) if the - chef-client run encounters any critical errors/failures when - executing a xNF action. -* R-44013 The xNF **MUST** populate an attribute, defined as node - [‘PushJobOutput’] with the desired output on all nodes in the push job - that execute chef-client run if the xNF action requires the output of a - chef-client run be made available (e.g., get running configuration). -* R-30654 The xNF Package **MUST** have appropriate cookbooks that are - designed to automatically ‘rollback’ to the original state in case of - any errors for actions that change state of the xNF (e.g., configure). -* R-65755 The xNF **SHOULD** support callback URLs to return information - to ONAP upon completion of the chef-client run for any chef-client run - associated with a xNF action. - -- As part of the push job, ONAP will provide two parameters in the - environment of the push job JSON object: - - - ‘RequestId’ a unique Id to be used to identify the request, - - ‘CallbackUrl’, the URL to post response back. - -- If the CallbackUrl field is empty or missing in the push job, then - the chef-client run need not post the results back via callback. - -* R-15885 The xNF **MUST** Upon completion of the chef-client run, - POST back on the callback URL, a JSON object as described in Table - A2 if the chef-client run list includes a cookbook/recipe that is - callback capable. Failure to POST on the Callback Url should not be - considered a critical error. That is, if the chef-client successfully - completes the xNF action, it should reflect this status on the Chef - Server regardless of whether the Callback succeeded or not. + +.. req:: + :id: R-27310 + :target: XNF + :keyword: MUST + + The xNF Package **MUST** include all relevant Chef artifacts + (roles/cookbooks/recipes) required to execute xNF actions requested by + ONAP for loading on appropriate Chef Server. + +.. req:: + :id: R-26567 + :target: XNF + :keyword: MUST + + The xNF Package **MUST** include a run list of + roles/cookbooks/recipes, for each supported xNF action, that will + perform the desired xNF action in its entirety as specified by ONAP + (see Section 7.c, ONAP Controller APIs and Behavior, for list of xNF + actions and requirements), when triggered by a chef-client run list + in JSON file. + +.. req:: + :id: R-98911 + :target: XNF + :keyword: MUST NOT + + The xNF **MUST NOT** use any instance specific parameters + for the xNF in roles/cookbooks/recipes invoked for a xNF action. + +.. req:: + :id: R-37929 + :target: XNF + :keyword: MUST + + The xNF **MUST** accept all necessary instance specific + data from the environment or node object attributes for the xNF + in roles/cookbooks/recipes invoked for a xNF action. + +.. req:: + :id: R-62170 + :target: XNF + :keyword: MUST + + The xNF **MUST** over-ride any default values for + configurable parameters that can be set by ONAP in the roles, + cookbooks and recipes. + +.. req:: + :id: R-78116 + :target: XNF + :keyword: MUST + + The xNF **MUST** update status on the Chef Server + appropriately (e.g., via a fail or raise an exception) if the + chef-client run encounters any critical errors/failures when + executing a xNF action. + +.. req:: + :id: R-44013 + :target: XNF + :keyword: MUST + + The xNF **MUST** populate an attribute, defined as node + ['PushJobOutput'] with the desired output on all nodes in the push job + that execute chef-client run if the xNF action requires the output of a + chef-client run be made available (e.g., get running configuration). + +.. req:: + :id: R-30654 + :target: XNF + :keyword: MUST + + The xNF Package **MUST** have appropriate cookbooks that are + designed to automatically 'rollback' to the original state in case of + any errors for actions that change state of the xNF (e.g., configure). + +.. req:: + :id: R-65755 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** support callback URLs to return information + to ONAP upon completion of the chef-client run for any chef-client run + associated with a xNF action. + + - As part of the push job, ONAP will provide two parameters in the + environment of the push job JSON object: + + - "RequestId" a unique Id to be used to identify the request, + - "CallbackUrl", the URL to post response back. + + - If the CallbackUrl field is empty or missing in the push job, then + the chef-client run need not post the results back via callback. + +.. req:: + :id: R-15885 + :target: XNF + :keyword: MUST + + The xNF **MUST** Upon completion of the chef-client run, + POST back on the callback URL, a JSON object as described in Table + A2 if the chef-client run list includes a cookbook/recipe that is + callback capable. Failure to POST on the Callback Url should not be + considered a critical error. That is, if the chef-client successfully + completes the xNF action, it should reflect this status on the Chef + Server regardless of whether the Callback succeeded or not. ONAP Chef API Usage ~~~~~~~~~~~~~~~~~~~ @@ -663,37 +1236,73 @@ VNF Configuration via Ansible Requirements Ansible Client Requirements +++++++++++++++++++++++++++++ -* R-32217 The xNF **MUST** have routable FQDNs that are reachable via - the Ansible Server for the endpoints (VMs) of a xNF on which playbooks - will be executed. ONAP will initiate requests to the Ansible Server - for invocation of playbooks against these end points [3]_. -* R-54373 The xNF **MUST** have Python >= 2.6 on the endpoint VM(s) - of a xNF on which an Ansible playbook will be executed. -* R-35401 The xNF **MUST** support SSH and allow SSH access by the - Ansible server for the endpoint VM(s) and comply with the Network - Cloud Service Provider guidelines for authentication and access. -* R-82018 The xNF **MUST** load the Ansible Server SSH public key onto xNF - VM(s) as part - of instantiation. This will allow the Ansible Server to authenticate - to perform post-instantiation configuration without manual intervention - and without requiring specific xNF login IDs and passwords. - - CAUTION: For VNFs configured using Ansible, to eliminate the need - for manual steps, post-instantiation and pre-configuration, to upload - of SSH public keys, SSH public keys loaded during (heat) instantiation shall - be preserved and not removed by (heat) embedded (userdata) scripts. - -* R-92866 The xNF **MUST** include as part of post-instantiation configuration - done by Ansible Playbooks the removal/update of the SSH public key from - /root/.ssh/authorized_keys, and update of SSH keys loaded through - instantiation to support Ansible. This may include download and install of - new SSH keys and new mechanized IDs. -* R-91745 The xNF **MUST** update the Ansible Server and other entities - storing and using the SSH keys for authentication when the SSH keys used - by Ansible are regenerated/updated. - - NOTE: Ansible Server itself may be used to upload new SSH public keys - onto supported VNFs. + +.. req:: + :id: R-32217 + :target: XNF + :keyword: MUST + + The xNF **MUST** have routable FQDNs that are reachable via + the Ansible Server for the endpoints (VMs) of a xNF on which playbooks + will be executed. ONAP will initiate requests to the Ansible Server + for invocation of playbooks against these end points [3]_. + +.. req:: + :id: R-54373 + :target: XNF + :keyword: MUST + + The xNF **MUST** have Python >= 2.6 on the endpoint VM(s) + of a xNF on which an Ansible playbook will be executed. + +.. req:: + :id: R-35401 + :target: XNF + :keyword: MUST + + The xNF **MUST** support SSH and allow SSH access by the + Ansible server for the endpoint VM(s) and comply with the Network + Cloud Service Provider guidelines for authentication and access. + +.. req:: + :id: R-82018 + :target: XNF + :keyword: MUST + + The xNF **MUST** load the Ansible Server SSH public key onto xNF + VM(s) as part of instantiation. This will allow the Ansible Server + to authenticate to perform post-instantiation configuration without + manual intervention and without requiring specific xNF login IDs and + passwords. + + CAUTION: For VNFs configured using Ansible, to eliminate the need + for manual steps, post-instantiation and pre-configuration, to + upload of SSH public keys, SSH public keys loaded during (heat) + instantiation shall be preserved and not removed by (heat) embedded + (userdata) scripts. + +.. req:: + :id: R-92866 + :target: XNF + :keyword: MUST + + The xNF **MUST** include as part of post-instantiation configuration + done by Ansible Playbooks the removal/update of the SSH public key from + /root/.ssh/authorized_keys, and update of SSH keys loaded through + instantiation to support Ansible. This may include download and install of + new SSH keys and new mechanized IDs. + +.. req:: + :id: R-91745 + :target: XNF + :keyword: MUST + + The xNF **MUST** update the Ansible Server and other entities + storing and using the SSH keys for authentication when the SSH + keys used by Ansible are regenerated/updated. + + Note: Ansible Server itself may be used to upload new SSH public + keys onto supported VNFs. Ansible Playbook Requirements +++++++++++++++++++++++++++++++ @@ -702,21 +1311,44 @@ An Ansible playbook is a collection of tasks that is executed on the Ansible server (local host) and/or the target VM (s) in order to complete the desired action. -* R-40293 The xNF **MUST** make available playbooks that conform - to the ONAP requirement. -* R-49396 The xNF **MUST** support each ONAP (APPC) xNF action - by invocation of **one** playbook [4]_. The playbook will be responsible - for executing - all necessary tasks (as well as calling other playbooks) to complete - the request. -* R-33280 The xNF **MUST NOT** use any instance specific parameters - in a playbook. -* R-48698 The xNF **MUST** utilize information from key value pairs - that will be provided by the Ansible Server as "extra-vars" during - invocation to execute the desired xNF action. If the playbook requires - files, they must also be supplied using the methodology detailed in - the Ansible Server API, unless they are bundled with playbooks, example, - generic templates. + +.. req:: + :id: R-40293 + :target: XNF + :keyword: MUST + + The xNF **MUST** make available playbooks that conform + to the ONAP requirement. + +.. req:: + :id: R-49396 + :target: XNF + :keyword: MUST + + The xNF **MUST** support each ONAP (APPC) xNF action + by invocation of **one** playbook [4]_. The playbook will be responsible + for executing all necessary tasks (as well as calling other playbooks) + to complete the request. + +.. req:: + :id: R-33280 + :target: XNF + :keyword: MUST NOT + + The xNF **MUST NOT** use any instance specific parameters + in a playbook. + +.. req:: + :id: R-48698 + :target: XNF + :keyword: MUST + + The xNF **MUST** utilize information from key value pairs + that will be provided by the Ansible Server as "extra-vars" during + invocation to execute the desired xNF action. If the playbook requires + files, they must also be supplied using the methodology detailed in + the Ansible Server API, unless they are bundled with playbooks, example, + generic templates. The Ansible Server will determine if a playbook invoked to execute a xNF action finished successfully or not using the “PLAY_RECAP” summary @@ -725,82 +1357,118 @@ only if the “PLAY RECAP” section at the end of playbook execution output has no unreachable hosts and no failed tasks. Otherwise, the playbook will be considered to have failed. -* R-43253 The xNF **MUST** use playbooks designed to allow Ansible - Server to infer failure or success based on the “PLAY_RECAP” capability. - NOTE: There are cases where playbooks need to interpret results of a task - and then determine success or failure and return result accordingly - (failure for failed tasks). -* R-50252 The xNF **MUST** write to a specific one text files that - will be retrieved and made available by the Ansible Server if, as part - of a xNF action (e.g., audit), a playbook is required to return any - xNF information. The text files must be written in the same directory as - the one from which the playbook is being executed. A text file must be - created for the xNF playbook run targets/affects, with the name - ‘<VNFname>_results.txt’ into which any desired output from each - respective VM/xNF must be written. -* R-51442 The xNF **SHOULD** use playbooks that are designed to - automatically ‘rollback’ to the original state in case of any errors - for actions that change state of the xNF (e.g., configure). - - NOTE: In case rollback at the playbook level is not supported or possible, - the xNF provider shall provide alternative locking mechanism (e.g., for a - small xNF the rollback mechanism may rely on workflow to terminate and - re-instantiate VNF VMs and then re-run playbook(s)). Backing up updated - files also recommended to support rollback when soft rollback is feasible. - -* R-58301 The xNF **SHOULD NOT** use playbooks that make requests to - Cloud resources e.g. Openstack (nova, neutron, glance, heat, etc.); - therefore, there is no use for Cloud specific variables like Openstack - UUIDs in Ansible Playbooks. - - Rationale: Flows that require interactions with Cloud services - e.g. Openstack shall rely on workflows run by an Orchestrator - (Change Management) or - other capability (such as a control loop or Operations GUI) outside - Ansible Server which can be executed by a Controller such as APPC. - There are policies, as part of Control Loop models, that send remediation - action requests to APPC; these are triggered as a response to an event - or correlated events published to Event Bus. - -* R-02651 The xNF **SHOULD** use the Ansible backup feature to save a - copy of configuration files before implementing changes to support - operations such as backing out of software upgrades, configuration - changes or other work as this will help backing out of configuration - changes when needed. -* R-43353 The xNF **MUST** return control from Ansible Playbooks only - after tasks are fully complete, signaling that the playbook completed - all tasks. When starting services, return control only after all services - are up. This is critical for workflows where the next steps are dependent - on prior tasks being fully completed. - - Detailed examples: - - StopApplication Playbook – StopApplication Playbook shall return control - and a completion status only after VNF application is fully stopped, all - processes/services stopped. - StartApplication Playbook – StartApplication Playbook shall return control - and a completion status only after all VNF application services are fully up, - all processes/services started and ready to provide services. NOTE: Start - Playbook should not be declared complete/done after starting one or several - processes that start the other processes. - - HealthCheck Playbook: - - SUCCESS – HealthCheck success shall be returned (return code 0) by a - Playbook or Cookbook only when VNF is 100% healthy, ready to take requests - and provide services, with all VNF required capabilities ready to provide - services and with all active and standby resources fully ready with no - open MINOR, MAJOR or CRITICAL alarms. - - NOTE: In some cases, a switch may need to be turned on, but a VNF - reported as healthy, should be ready to take service requests or be - already processing service requests successfully. - - A successful execution of a health-check playbook shall also create one - file per VNF VM, named after the VNF instance name followed by - “_results.txt (<vnf_instance>_results.txt) to indicate health-check was - executed and completed successfully, example: vfdb9904v_results.txt, - with the following contents: + +.. req:: + :id: R-43253 + :target: XNF + :keyword: MUST + + The xNF **MUST** use playbooks designed to allow Ansible + Server to infer failure or success based on the "PLAY_RECAP" capability. + + Note: There are cases where playbooks need to interpret results + of a task and then determine success or failure and return result + accordingly (failure for failed tasks). + +.. req:: + :id: R-50252 + :target: XNF + :keyword: MUST + + The xNF **MUST** write to a specific one text files that + will be retrieved and made available by the Ansible Server if, as part + of a xNF action (e.g., audit), a playbook is required to return any + xNF information. The text files must be written in the same directory as + the one from which the playbook is being executed. A text file must be + created for the xNF playbook run targets/affects, with the name + '<VNFname>_results.txt' into which any desired output from each + respective VM/xNF must be written. + +.. req:: + :id: R-51442 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** use playbooks that are designed to + automatically 'rollback' to the original state in case of any errors + for actions that change state of the xNF (e.g., configure). + + Note: In case rollback at the playbook level is not supported or + possible, the xNF provider shall provide alternative locking + mechanism (e.g., for a small xNF the rollback mechanism may rely + on workflow to terminate and re-instantiate VNF VMs and then re-run + playbook(s)). Backing up updated files also recommended to support + rollback when soft rollback is feasible. + +.. req:: + :id: R-58301 + :target: XNF + :keyword: SHOULD NOT + + The xNF **SHOULD NOT** use playbooks that make requests to + Cloud resources e.g. Openstack (nova, neutron, glance, heat, etc.); + therefore, there is no use for Cloud specific variables like Openstack + UUIDs in Ansible Playbooks. + + Rationale: Flows that require interactions with Cloud services e.g. + Openstack shall rely on workflows run by an Orchestrator + (Change Management) or other capability (such as a control loop or + Operations GUI) outside Ansible Server which can be executed by a + Controller such as APPC. There are policies, as part of Control Loop + models, that send remediation action requests to APPC; these are + triggered as a response to an event or correlated events published + to Event Bus. + +.. req:: + :id: R-02651 + :target: XNF + :keyword: SHOULD + + The xNF **SHOULD** use the Ansible backup feature to save a + copy of configuration files before implementing changes to support + operations such as backing out of software upgrades, configuration + changes or other work as this will help backing out of configuration + changes when needed. + +.. req:: + :id: R-43353 + :target: XNF + :keyword: MUST + + The xNF **MUST** return control from Ansible Playbooks only + after tasks are fully complete, signaling that the playbook completed + all tasks. When starting services, return control only after all services + are up. This is critical for workflows where the next steps are dependent + on prior tasks being fully completed. + +Detailed examples: + +StopApplication Playbook – StopApplication Playbook shall return control +and a completion status only after VNF application is fully stopped, all +processes/services stopped. +StartApplication Playbook – StartApplication Playbook shall return control +and a completion status only after all VNF application services are fully up, +all processes/services started and ready to provide services. NOTE: Start +Playbook should not be declared complete/done after starting one or several +processes that start the other processes. + +HealthCheck Playbook: + +SUCCESS – HealthCheck success shall be returned (return code 0) by a +Playbook or Cookbook only when VNF is 100% healthy, ready to take requests +and provide services, with all VNF required capabilities ready to provide +services and with all active and standby resources fully ready with no +open MINOR, MAJOR or CRITICAL alarms. + +NOTE: In some cases, a switch may need to be turned on, but a VNF +reported as healthy, should be ready to take service requests or be +already processing service requests successfully. + +A successful execution of a health-check playbook shall also create one +file per VNF VM, named after the VNF instance name followed by +“_results.txt (<vnf_instance>_results.txt) to indicate health-check was +executed and completed successfully, example: vfdb9904v_results.txt, +with the following contents: .. code-block:: java @@ -822,19 +1490,19 @@ Example: } .. - FAILURE – A health check playbook shall return a non-zero return code in - case VNF is not 100% healthy because one or more VNF application processes - are stopped or not ready to take service requests or because critical or - non-critical resources are not ready or because there are open MINOR, MAJOR - or CRITICAL traps/alarms or because there are issues with the VNF that - need attention even if they do not impact services provided by the VNF. +FAILURE – A health check playbook shall return a non-zero return code in +case VNF is not 100% healthy because one or more VNF application processes +are stopped or not ready to take service requests or because critical or +non-critical resources are not ready or because there are open MINOR, MAJOR +or CRITICAL traps/alarms or because there are issues with the VNF that +need attention even if they do not impact services provided by the VNF. - A failed health-check playbook shall also create one file per VNF, - named after the VNF instance name, followed by - “_results.txt to indicate health-check was executed and found issues - in the health of the VNF. This is to differentiate from failure to - run health-check playbook or playbook tasks to verify the health of the VNF, - example: vfdb9904v_results.txt, with the following contents: +A failed health-check playbook shall also create one file per VNF, +named after the VNF instance name, followed by +“_results.txt to indicate health-check was executed and found issues +in the health of the VNF. This is to differentiate from failure to +run health-check playbook or playbook tasks to verify the health of the VNF, +example: vfdb9904v_results.txt, with the following contents: .. code-block:: java @@ -851,7 +1519,7 @@ Example: } .. - Example: +Example: .. code-block:: java @@ -869,7 +1537,9 @@ Example: } .. - See `VNF REST APIs`_ for additional details on HealthCheck. +See `VNF REST APIs`_ for additional details on HealthCheck. + + ONAP Controller / Ansible API Usage ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1020,3 +1690,4 @@ Table 8. ONAP Controller APIs and NETCONF Commands :width: 4.74in :height: 3.3in + |