diff options
Diffstat (limited to 'nokiav2/docs/integration.rst')
| -rw-r--r-- | nokiav2/docs/integration.rst | 265 |
1 files changed, 202 insertions, 63 deletions
diff --git a/nokiav2/docs/integration.rst b/nokiav2/docs/integration.rst index 303a2016..4a0fb36f 100644 --- a/nokiav2/docs/integration.rst +++ b/nokiav2/docs/integration.rst @@ -1,57 +1,124 @@ Integrate ONAP with Nokia VNFM ============================== -The following section describes how the Nokia VNFM can be integrated into ONAP. The integration is the easiest if the +The following section describes how to integrate the Nokia Virtualized Network Function Manager (VNFM) into ONAP. The integration is easier if the VNFM is installed before ONAP. Prepare the VNFM ---------------- -* Start VNFM: The VNFM must be able to communicate with the ONAP VF-C interface, the cloud and the VNF, so the VNFM must - have the correct network setup. The VNFM will use LCNs to notify VF-C of the executed changes, so the LCN zone of the + +* Start the VNFM. + The VNFM must be able to communicate with the ONAP VF-C interface, the virtualized infrastructure manager (VIM) and the virtualized network function (VNF), so the VNFM must + have the correct network setup. The VNFM uses lifecycle notifications (LCNs) to notify the VF-C about the executed changes, therefore, the LCN zone of the VNFM must be configured so that the VNFM is able to reach the VF-C LCN interface. * Register driver in CBAM - - Log into CBAM via SSH and determine the keycloak admin password + - Using SSH, log in to the CloudBand Application Manager (CBAM) virtual machine as cbam user and determine the Keycloak + auto-generated admin password with the following command: ectl get /cbam/cluster/components/keycloak/admin_credentials/password + + - Copy the printout of the command. + + - Access the Keycloak login page with the following URL: https://<cbamIp>/auth/admin where <cbamIp> is the FQDN or IP + address assigned to CBAM node during instantiation. Optionally, it may contain a port, for example, cbam.mycompany.com:port or 1.2.3.4:port. + + Result: The Keycloak Administration Console login page loads up. + + - Log in to Keycloak with the 'admin' username and the auto-generated admin password you copied to clipboard, then change the auto-generated password and note the new password. + + Result: You are logged in to the Keycloak Administration Console. + + - Add a new client on Keycloak: + + - From the Configure menu, select Clients. + + - Result: The Clients pane appears. + + - Click Create. + + - Result: The Add Client pane appears. + + - Set the Client ID to onapClientId and click Save. Note the Client ID which will be referred to as <clientId>. + + - Result: The following notification appears: Success! The client has been created. The new client's profile page appears. + + - Customize the following settings for the newly created client: + + - Access Type: select confidential. Keycloak will generate a client secret that serves as a type of password for your client. + + - Make sure the following settings are ON: Standard Flow Enabled, Direct Access Grants Enabled, Service Accounts Enabled, Authorization Enabled + + - Type * in the Valid Redirect URIs field. + + - Click Save. + + - Result: The following notification appears: Success! Your changes have been saved to the client. + + - Note the Client Secret which will be referred to as <clientSecret>: + + - Select the Credentials tab. + + - From the Client Authenticator drop-down list, select the Client ID and Secret and check the value of Secret. + + - Add a new user on Keycloak: + + - From the Manage menu, select Users. + + - Result: The Users pane appears. + + - Click Add user and define the parameters for the creation: + + - Username: onap + + - Note the username, it will be referred to as <onapUsername>. + + - User Enabled: make sure it is On. + + - Click Save. + + - Result: The following notification appears: Success! The user has been created. The new user's profile page appears. + + - Create a password for the user: select the Credentials tab on the user profile and set the password. + + - Note: The user is prompted to change this password when logging in to CBAM for the first time. + + - Assign the "user" role to the created user: + + - Select the Role Mappings tab on the user profile. + + - Select the "user" role from the Available Roles box, then click Add selected. + + - Access the CBAM GUI login page with the following URL: https://<cbamIp> where <cbamIp> is the FQDN or IP address assigned to CBAM node during instantiation. Optionally, it may contain a port, for example, cbam.mycompany.com:port or 1.2.3.4:port. - - ectl get /cbam/cluster/components/keycloak/admin_credentials/password + - Log in to CBAM GUI using the created user. - - Log into keycloak https://<cbamIp>/auth/admin with admin username and password from previous step and change password (note the changed password) - - Add a new client + - Change and note the password which will be referred to as <onapPassword>. - - set client id to onapClient - - change credential type to confidential - - enable Standard Flow Enabled, Direct Access Grants Enabled, Service Accounts Enabled - - add * for redirect URL - - save - - note the client id <clientId> - - add new credential - - note the client secret <clientSecret> + - Using SSH, add SSL certificates for all VIM connections or disable certificate verification as follows: - - Add a new user + - For insecure connection (all certificates are automatically trusted) - - note the username <onapUsername> - - reset password - - assign the "user" role to the created user + - execute the below commands in the following order: - - Log into CBAM GUI using the created user +.. code-block:: console + + sudo su - + ectl set /cbam/cluster/components/tlm/insecure_vim_connection true + ectl set /actions/reconfigure start + journalctl -fu cbam-reconfigure.service - - change and note the password <onapPassword> + - Wait for the "Started cbam-reconfigure.service." message. - - Add SSL certificates for all VIM connection or disable certificate verification + - For secure connection : read the CBAM documentation. - - For insecure (all certificates are automatically trusted) +Prepare /ets/hosts file on your laptop +-------------------------------------- - - sudo su - - - ectl set /cbam/cluster/components/tlm/insecure_vim_connection true - - ectl set /actions/reconfigure start - - journalctl -fu cbam-reconfigure.service - - (wait for "Started cbam-reconfigure.service.") +Note: This is an optional step with which it is easier to copy paste URLs - - For secure: (read CBAM documentation) +* Using the OpenStack Horizon Dashboard, find the ONAP servers you have deployed and note their IP addresses. -Prepare /ets/hosts file on your laptop (optional easier to copy paste URLs) ----------------------------------------------------------------------------- +* Depending on your operating system, use the respective method to prepare an /ets/hosts file to link the DNS servers to the corresponding IP addresses, see the table below: +-------------------+---------------------------------+ | IP address | DNS entry | @@ -74,40 +141,74 @@ Prepare /ets/hosts file on your laptop (optional easier to copy paste URLs) Add the VNFM driver to ONAP --------------------------- -- Locate the IP address of the MSB (MSB_IP). Look at the VM instances of ONAP and search one with vm1-multi-service name. This is where the MSB is located -- Create VIM in A&AI (may already exist) (repeat for all clouds planed to be used) +- Locate and note the IP address of the MSB (MSB_IP) on the OpenStack Horizon Dashboard. Look at the VM instances of ONAP and find one with vm1-multi-service name. This is where the MSB is located. + +- Create VIM in A&AI Note: + + - The VIM may already exist. + + - Repeat this step for all VIMs planned to be used. + + - Go to http://msb.api.simpledemo.onap.org/iui/aai-esr-gui/extsys/vim/vimView.html + + - Result: The ONAP platform opens. + + - On the platform, click Register. + + - Result: The registration form opens. + + - Fill in the fields. - - http://msb.api.simpledemo.onap.org/iui/aai-esr-gui/extsys/vim/vimView.html + - Note: Cloud credentials are supplied by the VNF integrator. -- Determine the tenant id to be used (log into the cloud) (repeat for all tenants planed to be used within the cloud) + - To obtain the value of the Auth URL field and the tenant id (which will be required later), follow these steps: + - Note: The actual steps depend on the OpenStack Dashboard version and vendor. + - Go to OpenStack Horizon Dashboard. + - Select the Project main tab. + - Select the API Access tab. + - Click View Credentials. + - Copy the value of Authentication URL and paste it in the Auth URL field. + - Note the value of Project ID: this is the <tenantId> which will be required later (Repeat this step for all tenants planned to be used within the VIM.) - - http://<horizonUrl>/project/access_and_security/ Intentity / Projects + - Click Save. -- Create tenant (may already exist) (repeat for all tenants planed to be used within the cloud) + - Result: The driver has been successfully added. - + tool: Postman - + change tenantId, cloudRegion and cloudOwner - + method: PUT - + url: https://aai.api.simpledemo.onap.org:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/<cloudOwner>/<cloudRegion>/tenants/tenant/<tenantId> - + Headers +- Create tenant - - basic auth AAI:AAI - - X-FromAppId : any - - Content-type: application/json - - Accept: application/json + - Note: - - Content: :download:`aai.create.tenant.request.json <sample/aai.create.tenant.request.json>` + - The tenant may already exist. - - change tenant id, region id owner id and tenant name + - Repeat this step for all tenants planned to be used within the VIM. -- Register the VNFM as external system (repeat for all clouds planed to be used) + - Using a REST client of your choice, send a request to the following URL: https://aai.api.simpledemo.onap.org:8443/aai/v11/cloud-infrastructure/cloud-regions/cloud-region/<cloudOwner>/<cloudRegion>/tenants/tenant/<tenantId> - - Visit MSB http://msb.api.simpledemo.onap.org:9518/api/aai-esr-server/v1/vims + - download the content of the request: `aai.create.tenant.request.json <sample/aai.create.tenant.request.json>` + - In the request URL and in the content of the request, substitute <tenantId>, <cloudRegion> and <cloudOwner> with the respective values. + - HTTP method: PUT + - Set the following values in the Header of the request: - - note the cloud owner field <cloudOwner> - - note the region id field <cloudRegionId> + - basic auth AAI:AAI + - X-FromAppId : any + - Content-type: application/json + - Accept: application/json - - Visit MSB http://msb.api.simpledemo.onap.org/iui/aai-esr-gui/extsys/vnfm/vnfmView.html and click on register button +- Register the VNFM as an external system: + + - Note: - Repeat this step for all VIMs planned to be used. + + - Access the following URL: http://msb.api.simpledemo.onap.org/iui/aai-esr-gui/extsys/vnfm/vnfmView.html + + - Result: The ONAP platform opens + + - On the platform, click Register. + + - Result: The registration form opens. + + - Fill in the fields as follows: + + - Note: Cloud credentials are supplied by the VNF integrator. +-----------------+-----------------------------------+ | key | Value | @@ -131,17 +232,31 @@ Add the VNFM driver to ONAP | Password | <clientSecret> | +-----------------+-----------------------------------+ - - Determine the UUID of the VNFM (if the VNFM was registered multiple times select one at random) + - Click Save. + + - Result: The registration has been completed. + + - Determine the UUID of the VNFM: + + - Note: If the VNFM was registered multiple times, select one of them at random + - Access the following URL: http://msb.api.simpledemo.onap.org:9518/api/aai-esr-server/v1/vnfms + - Look for the previously registered VNFM and note the value of <vnfmId>. - - visit http://msb.api.simpledemo.onap.org:9518/api/aai-esr-server/v1/vnfms and search for the previously registered VNFM - - note the id field <vnfmId> Configure the SVNFM driver (generic) ------------------------------------ - - Download the CBAM SVNFM driver - - docker pull https://nexus.onap.org/content/sites/raw/onap/vfc/nfvo/svnfm/nokiav2:1.1.0-STAGING-latest - - Start the driver (fill in values) +- Using SSH, download the CBAM SVNFM driver by executing the following command: + docker pull https://nexus.onap.org/content/sites/raw/onap/vfc/nfvo/svnfm/nokiav2:1.1.0-STAGING-latest + +- Determine the IMAGE ID: + + - Execute the following command: docker images + - Find the required image and note the IMAGE ID. + +- Start the driver: + + - Fill in the required values and execute the following: .. code-block:: console @@ -153,9 +268,33 @@ Configure the SVNFM driver (generic) export CBAM_USERNAME=<onapUsername> docker run --name vfc_nokia -p 8089:8089 -e "MSB_IP=$MULTI_NODE_IP" -e "CONFIGURE=kuku" -e "EXTERNAL_IP=$MULTI_NODE_IP" -e "CBAM_CATALOG_URL=https://$CBAM_IP:443/api/catalog/adapter/" -e "CBAM_LCN_URL=https://$CBAM_IP:443/vnfm/lcn/v3/" -e "CBAM_KEYCLOAK_URL=https://$CBAM_IP:443/auth/" -e "CBAM_USERNAME=$CBAM_USERNAME" -e "CBAM_PASSWORD=$CBAM_PASSWORD" -e "VNFM_ID=$VNFM_ID" -d --stop-timeout 300 $IMAGE_ID +- Determine the identifier of the container: + + - Execute the following command: docker ps + - Find the required container and note the CONTAINER ID (first column/first row on the list). + +- Verify if the VNFM driver has been successfully started by executing the following commands: + +.. code-block:: console + + execute docker exec -it <containerId> /bin/bash + execute tail -f service.log + + - Result: The SVNFM integration is successful if the end of the command output contains "Started NokiaSvnfmApplication". + +- Verify if the SVNFM is registered into MSB: + + - Go to http://msb.api.simpledemo.onap.org/msb + - Check if NokiaSVNFM micro service is present in the boxes. + + Configure the SVNFM driver (ONAP demo environment) -------------------------------------------------- - - Configure the already running instance - - docker exec -it `docker ps | grep nokiav2 | awk '{print $1}'` /bin/bash - - Edit /service/application.properties - - Fill values for cbamCatalogUrl, cbamLcnUrl, cbamKeyCloakBaseUrl, cbamUsername, cbamPassword, vnfmId +This step is executed instead of the "Configure the SVNFM driver (generic)" in case of an ONAP demo environment. + +- Configure the already running instance: + + - Execute the following command: docker exec -it `docker ps | grep nokiav2 | awk '{print $1}'` /bin/bash + - Edit /service/application.properties: + + - In this file, change the default values of the following keys to the correct values: cbamCatalogUrl, cbamLcnUrl, cbamKeyCloakBaseUrl, cbamUsername, cbamPassword, vnfmId |