Merge "add usecase-ui user guide"

17 files changed, 230 insertions, 141 deletions

diff --git a/docs/platform/administration.rst b/docs/platform/administration.rst
index 988bbae4..52ded424 100644
--- a/docs/platform/administration.rst
+++ b/docs/platform/administration.rst
@@ -1,31 +1,26 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
 
 
 Administration
 --------------
+Usecase-UI components have been dockerized, can use docker command to manage Usecase-UI.
 
-It is not hard to manage Usecase-UI because it's been dockerized and split into two dockers. One is for UI and the other for Server.
 
 Processes / Dockers
-^^^^^^^^^^^^^^^^^^^
++++++++++
 
 Usecase-UI mainly consists of two dockers:
-
 * Usecase-UI UI Docker
-
 * Usecase-UI Server Docker
 
+
 Actions
-^^^^^^^
++++++++
 
 All actions performed on the Usecase-UI modules are docker-based.
-
 * Create a Container: ``sudo docker run [OPTIONS] IMAGE [COMMAND] [ARG...]``
-
 * Kill a Container: ``sudo docker kill [OPTIONS] CONTAINER [CONTAINER...]``
-
 * Stop a Container: ``sudo docker stop [OPTIONS] CONTAINER [CONTAINER...]``
-
 * Start a Container: ``sudo docker start [OPTIONS] CONTAINER [CONTAINER...]``
-
 * Restart a Container: ``sudo docker restart [OPTIONS] CONTAINER [CONTAINER...]``
diff --git a/docs/platform/architecture.rst b/docs/platform/architecture.rst
index e4dfcc5e..10891050 100644
--- a/docs/platform/architecture.rst
+++ b/docs/platform/architecture.rst
@@ -1,22 +1,20 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
 
 
 Usecase-UI Architecture
------------------------
+=======================
 
-Usecase-UI comprises two modules: the Usecase-UI UI module and the Usecase-UI Server module.
+|image0|
 
-    - Usecase-UI UI Module
-    - Usecase-UI Server Module
+.. |image0| image:: images/usecaseui-architecture.png
+   :width: 6.97047in
+   :height: 4.63208in
 
-Usecase-UI itself is an independent component in ONAP, which means it could be deployed as an ONAP-level component.
-
-.. image:: images/overall-architecture-in-onap.png
-
-Take a deep dive into Usecase-UI, we could see it mainly consists of two modules, which are the UI module and Server module respectively.
+Usecase-UI includes two modules : Usecase-UI Frontend and Usecase-UI Backend.
+    - Usecase UI UI (Frontend Module)
+    - Usecase UI Server (Backend Module)
 
+Usecase-UI mainly consists of two modules, they are the UI module and Server module respectively.
 The UI module provides Graphical User Interface (GUI) for operators and end-users (e.g. LCM, Monitor).
-
-The Server module is the logic part of Usecase-UI. This part analyzes NS files for LCM function and subscribes vnf alarm and performance data for monitor function.
-
-.. image:: images/usecaseui-architecture.png
+The Server module is the logic part of Usecase-UI. This part provide ONAP other components APIs for Usecase-UI frontend.
diff --git a/docs/platform/configuration.rst b/docs/platform/configuration.rst
deleted file mode 100644
index ca332d83..00000000
--- a/docs/platform/configuration.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-
-Configuration
--------------
-
-No mechanism for customized configurations is provided in the Amsterdam release. Such functionalities will be provided in the future if necessary.
diff --git a/docs/platform/consumedapis.rst b/docs/platform/consumed_api.rst
index 46b2cde0..84523d9f 100644
--- a/docs/platform/consumedapis.rst
+++ b/docs/platform/consumed_api.rst
@@ -1,106 +1,72 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
 .. http://creativecommons.org/licenses/by/4.0
 
-Consumed APIs
--------------
 
-In the Amsterdam release, Usecase-UI mainly depends on the APIs provided by VF-C, SDC, A&AI, SO, DMaaP and MSB.
+Usecase-UI Consumed APIs
+========================
 
-VF-C
-^^^^
+References to APIs offered by other components
 
+VFC APIs
+--------
 #. Distribute Network Service package:
-
    ``POST  /api/catalog/v1/nspackages``
 
 #. Distribute VF resource:
-
    ``POST /api/catalog/v1/vnfpackages``
 
 #. Query operation progress for distributing network service/vf resource:
-
    ``GET  /api/nslcm/v1/jobs/{jobId}``
 
 #. Delete Network Service package:
-
    ``DELETE  /api/catalog/v1/nspackages/{csarId}``
 
 #. Delete VF resource:
-
    ``DELETE /api/catalog/v1/vnfpackages/{csarId}``
 
-
-SDC
-^^^^
-
+SDC APIs
+--------
 #. Query all distributed End to End Service:
-
    ``GET /sdc/v1/catalog/services``
 
 #. Query specified service:
-
    ``GET  /sdc/v1/catalog/services/{uuid}/metadata``
 
 #. Query VF resource:
-
    ``GET /sdc/v1/catalog/resources``
 
 #. Download csar file:
-
    ``GET /sdc/v1/catalog/services/{uuid}/toscaModel``
 
-
-A&AI
-^^^^
-
+A&AI APIs
+---------
 #. Query all customers:
-
    ``/aai/v11/business/customers``
 
 #. Query all service types for the specified customer:
-
    ``/aai/v11/business/customers/customer/{global-customer-id}/service-subscriptions``
 
 #. Query all service instances:
-
    ``/aai/v11/business/customers/customer/{global-customer-id}/service-subscriptions/service-subscription/{service-type}/service-instances``
 
 #. Query all cloud regions:
-
    ``/aai/v11/cloud-infrastructure/cloud-regions``
 
 #. Query all sdnc controllers:
-
    ``/aai/v11/external-system/esr-thirdparty-sdnc-list``
 
-
-SO
-^^^^
-
+SO APIs
+-------
 #. Instantiate service instance:
-
    ``POST /ecomp/mso/infra/e2eServiceInstances/v3``
 
 #. Query operation progress for service instantiation/termination:
-
    ``GET /ecomp/mso/infra/e2eServiceInstances/v3/{serviceId}/operations/{operationId}``
 
 #. Terminate service instance:
-
    ``DELETE /ecomp/mso/infra/e2eServiceInstances/v3/{serviceId}``
 
-
-DMaaP
-^^^^^
-
-#. Subscribing:
-
-   ``/events/{topic}/{consumergroup}/{consumerid}``
-
-
-MSB
-^^^
-
+MSB APIs
+--------
 #. Service Registration:
-
    ``/api/microservices/v1/services``
diff --git a/docs/platform/delivery.rst b/docs/platform/delivery.rst
index 30bf1d42..2bbbce00 100644
--- a/docs/platform/delivery.rst
+++ b/docs/platform/delivery.rst
@@ -1,12 +1,13 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
 
 
-Delivery
---------
+Usecase-UI Delivery
+===================
 
-Describe how functions are packaged into run-time components. For some components a block diagram may be useful.
-As mentioned in the architecture chapter, Usecase-UI mainly comprises two modules: the UI module and the Server module.
+Usecase-UI mainly comprises two modules: Usecase UI and  Usecase UI Server.
 
-* UI Docker: The main GUI for LCM and Monitor functions are performed in this module. The module provides Lifecycle CRUD operation interfaces and system alarm/performance monitor.
+* usecase-ui Docker Image : The main GUI for LCM and Monitor functions are performed in this module. 
+This part provides Lifecycle CRUD operation UI and alarm/performance monitor.
 
-* Server Docker: This module provides APIs for usecase-ui inside. Lifecycle Management and alarm/performance data Management are implemented by this module.
+* usecase-ui-server Docker Image : This part provides APIs and postgreSQL Database for usecase-ui inside.
diff --git a/docs/platform/index.rst b/docs/platform/index.rst
index e163a097..6eb424a5 100644
--- a/docs/platform/index.rst
+++ b/docs/platform/index.rst
@@ -1,20 +1,46 @@
 .. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
 
-Platform
---------
+.. _uui_index:
+
+Usecase-UI
+==========
+
+|image0|
+
+.. |image0| image:: images/overall-architecture-in-onap.png
+   :width: 5.97047in
+   :height: 3.63208in
+
+Usecase-UI provides self-service management GUI and monitor GUI for operators and end-users. 
+This project targets identifying all GUI requirements which operators and end-users need ONAP to support, 
+coordinating GUI parts of each ONAP subsystem, filling the gaps for improving GUI functionalities for use cases.
+* support customer and service type management GUI
+* support E2E instance lifecycle management GUI
+* support NS instance lifecycle management GUI
+* support NS/VNF/PNF package management GUI
+* support network management GUI for OTN Domain
+
+Usecase UI is composed of two parts that are usecase-ui and usecase-ui-server.
+* Usecase UI (Frontend)
+	* providing customer and service type management GUI
+	* providing E2E instance lifecycle management GUI
+	* providing NS instance lifecycle management GUI
+	* providing NS/VNF/PNF package management GUI
+	* providing network management GUI for OTN Domain
+* Usecase UI Server (Backend)
+	* providing postgreSQL for recording instance operation history
+	* providing template analysis result via calling modeling parser
+	* providing the way to call ONAP other components APIs
 
-Usecase UI is composed of two parts that are usecase-ui and usecase-ui-server. It provides self-service management GUI and monitor GUI for operators and end-users.
-This project targets identifying all GUI requirements which operators and end-users need ONAP to support, coordinating GUI parts of each ONAP subsystem, filling the gaps for improving GUI functionalities for use cases.
 
 .. toctree::
-   :maxdepth: 1
-   
+   :maxdepth: 2
+
    architecture.rst
-   offeredapis.rst
-   consumedapis.rst
+   offered_api.rst
+   consumed_api.rst
    delivery.rst
-   log-and-diagnostic-info.rst
-   installation.rst
-   configuration.rst
-   administration.rst
-   human-interfaces.rst
+   logging.rst
+   installation/index
+   administration.rst
\ No newline at end of file
diff --git a/docs/platform/installation.rst b/docs/platform/installation.rst
deleted file mode 100644
index 42c7c151..00000000
--- a/docs/platform/installation.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-
-Installation
-------------
-
-In case the users want to deploy Usecase-UI, the steps for the installation is as follows.
-
-Prerequisites
-^^^^^^^^^^^^^
-
-#. MSB must be installed and started. The user knows the IP address of the MSB API gateway service.
-   
-Steps
-^^^^^
-
-#. Start UI module of Usecase-UI using the command below:
-
-   ``sudo docker run -i -t -d --name uui_ui -p 8080:8080 -e MSB_ADDR=$OPENO_IP:80 nexus3.onap.org:10001/onap/usecase-ui`` 
-
-#. Start Server module of Usecase-UI using the command below:
-
-   ``sudo docker run -i -t -d --name uui_server -p 8082:8082 -e MSB_ADDR=$OPENO_IP:80 -e MR_ADDR=$MR_IP:3904 nexus3.onap.org:10001/onap/usecase-ui/usecase-ui-server``
diff --git a/docs/platform/installation/index.rst b/docs/platform/installation/index.rst
new file mode 100644
index 00000000..68d43b97
--- /dev/null
+++ b/docs/platform/installation/index.rst
@@ -0,0 +1,14 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+
+Usecase-UI Installation and User Guide
+======================================
+
+
+.. toctree:: 
+   :maxdepth: 1
+   
+   installation/index
+   
+   user-guide/index
diff --git a/docs/platform/installation/installation/index.rst b/docs/platform/installation/installation/index.rst
new file mode 100644
index 00000000..5f84d857
--- /dev/null
+++ b/docs/platform/installation/installation/index.rst
@@ -0,0 +1,7 @@
+Usecase-UI Installation over OOM
+--------------------------------
+
+.. toctree::
+    :titlesonly:
+
+    uui-over-oom
diff --git a/docs/platform/installation/installation/uui-over-oom.rst b/docs/platform/installation/installation/uui-over-oom.rst
new file mode 100644
index 00000000..ea87d3e8
--- /dev/null
+++ b/docs/platform/installation/installation/uui-over-oom.rst
@@ -0,0 +1,75 @@
+.. contents::
+   :depth: 3
+..
+
+
+**1. Scope**
+============
+
+This is a guide to help developer or tester to try to install Usecase-UI over OOM.
+
+**2. Component & function**
+===========================
+
+Usecase-UI Repositories
+
++--------------------------+-----------------------------------------------------+
+|     **Repo Name**        |     Description                                     |
++==========================+=====================================================+
+| usecase-ui               |      Frontend of Usecase-UI                         |
++--------------------------+-----------------------------------------------------+
+| usecase-ui/server        |      Backend of Usecase-UI                          |
++--------------------------+-----------------------------------------------------+
+
+
+Usecase-UI Docker Images
+::
+
+  nexus3.onap.org:10001/onap/usecase-ui:2.0.1
+  nexus3.onap.org:10001/onap/usecase-ui-server:2.0.1
+  
+
+**3. Usecase-UI Deployment**
+============================
+
+For initialization of docker there are 2 deployment options currently adpoted in ONAP : using heat template and using OOM.
+From Casablanca release, OOM is the recommended way, so here mainly give the steps for OOM based deployment.
+For OOM deployment you can refer to the below links:
+
+https://onap.readthedocs.io/en/latest/submodules/oom.git/docs/oom_setup_kubernetes_rancher.html
+https://onap.readthedocs.io/en/latest/submodules/oom.git/docs/oom_quickstart_guide.html#quick-start-label
+
+1. First ensure Usecase-UI is marked true against field enabled in the oom/kubernetes/onap/values.yaml for successful deployment.
+
+2. Upgrade Images in OOM charts to ensure the component version is right, you should check the respective component image version in Usecase-UI charts.
+If you need update the version, please modify values.yaml files.
+
+3. Rebuild all repos in helm. Every time you change the charts, you need to rebuild all repos to ensure the change can take effect.
+
+**4. Debug and Testing in running Pod**
+=======================================
+
+When you are doing the testing and would like to replace some new file like binary or some script and want to check the new resut.
+Before you replace the file to the running pod,you need to close the pod livenessProbe and readinessProbe first to avoid the pod restart.
+
+**5. Kubectl basic command**
+============================
+
+Basic operation of kubernests cluster(Take the namespace of onap in linux client as an example)
+
+* Check the cluster node
+::
+            
+    kubectl  get node
+                 
+* Check cluster namespace
+::
+               
+    kubectl  get ns
+                
+* View the pod information and the pod on which the node is located, under the namespace specified (for example, namespace on onap)
+::
+                     
+    kubectl get pod -o wide
+    kubectl get pod -n onap
+                
diff --git a/docs/platform/installation/user-guide/index.rst b/docs/platform/installation/user-guide/index.rst
new file mode 100644
index 00000000..311833da
--- /dev/null
+++ b/docs/platform/installation/user-guide/index.rst
@@ -0,0 +1,7 @@
+Usecase-UI Using Guide
+----------------------
+
+.. toctree::
+    :titlesonly:
+
+    uui-guide
diff --git a/docs/platform/installation/user-guide/uui-guide.rst b/docs/platform/installation/user-guide/uui-guide.rst
new file mode 100644
index 00000000..d0a7f644
--- /dev/null
+++ b/docs/platform/installation/user-guide/uui-guide.rst
@@ -0,0 +1,28 @@
+.. contents::
+   :depth: 3
+..
+
+
+**1. Confirm Usecase-UI MicroService**
+======================================
+
+Confirm that the Usecase-UI microservice has been successfully registered in MSB with OOM.
+
+**2. Register Usecase-UI MicroService**
+=======================================
+
+If Usecase-UI microservice does not exist in MSB, please register them manually.
+::
+            
+    curl -X POST -H "Content-Type: application/json" -d '{"serviceName": "usecaseui-server", "version": "v1", "url": "/api/usecaseui-server/v1","protocol": "REST", "nodes": [{"ip": "${UUI_SERVER_IP}","port": "8082"}]}' "http://${MSB_IP}:30280/api/microservices/v1/services"
+    curl -X POST -H "Content-Type: application/json" -d '{"serviceName": "usecaseui-ui", "version": "v1", "url": "/usecase-ui","path": "/iui/usecaseui","protocol": "UI", "nodes": [{"ip": "${UUI_IP}","port": "8080"}]}' "http://${MSB_IP}:30280/api/microservices/v1/services"
+
+**3. Open Usecase-UI Home**
+===========================
+
+Please open Usecase-UI dashboard page through your browser.
+
+::
+
+  http://${MSB_IP}:30280/iui/usecaseui/
+  
diff --git a/docs/platform/log-and-diagnostic-info.rst b/docs/platform/log-and-diagnostic-info.rst
deleted file mode 100644
index d545a2a4..00000000
--- a/docs/platform/log-and-diagnostic-info.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-
-Logging & Diagnostic Information
----------------------------------
-
-In the Amsterdam release, the logs are kept inside the docker containers, which means that you can get the log information only when the docker is still running.
-
-Where to Access Information
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-The way to get the log is to run the command ``docker logs ${docker-name}`` in the command window:
-
-``sudo docker logs ${docker-name}``
-
-Then the logs will be displayed in the command window.
diff --git a/docs/platform/logging.rst b/docs/platform/logging.rst
new file mode 100644
index 00000000..c6fb992c
--- /dev/null
+++ b/docs/platform/logging.rst
@@ -0,0 +1,15 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+
+Usecase-UI Logging & Diagnostic Information
+===========================================
+
+You can get the log when the dockers start.
+Use docker logs command to get the log.
+
+::
+
+  docker logs ${docker-name}
+  
+
diff --git a/docs/platform/offered_api.rst b/docs/platform/offered_api.rst
new file mode 100644
index 00000000..0e170c6e
--- /dev/null
+++ b/docs/platform/offered_api.rst
@@ -0,0 +1,8 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+
+
+Usecase-UI Offered APIs
+=======================
+
+The purpose of Usecase-UI is to provide Graphical User Interface for ONAP customers, so it does not provide any external interfaces.
diff --git a/docs/platform/offeredapis.rst b/docs/platform/offeredapis.rst
deleted file mode 100644
index a667b0c7..00000000
--- a/docs/platform/offeredapis.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-
-
-Offered APIs
--------------
-
-No offered APIs is provided in the Amsterdam release. Such functionalities will be provided in the future if necessary.
diff --git a/docs/release-notes.rst b/docs/release-notes.rst
index 2eb117bf..17112c89 100644
--- a/docs/release-notes.rst
+++ b/docs/release-notes.rst
@@ -19,6 +19,7 @@ Version: 2.0.1
 **New Features**
 - Management GUI for Customer and Service Type: customers query/create/delete and service type query/create/delete
 - Lifecycle Management GUI for CCVPN Use Case : CCVPN instances query/create/delte
+- Using Modeling Parser : use modeling parser to implement CCVPN instance lifecycle management
 - Upgrade Multicloud API : support consistent identification of cloud region functional requirement
 - Maturity Enhancement : change Mysql DB to PostgreSQL