1 files changed, 0 insertions, 132 deletions
diff --git a/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt b/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt
deleted file mode 100644
index aaad60320d..0000000000
--- a/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-The following describes how to configure authentication for the VNFM adapter.
-
-TLS should always be configured to ensure secure communication between the VNFM-adapter <-> BPMN infra and VNFM-adapter <-> VNFM
-If two-way TLS is configured then there is no need for any further authentication (i.e. no need for token or basic auth).
-If two-way TLS is NOT configured then authentication is REQUIRED. Oauth token based authentication must be used for requests, while for notifications either oauth tokens or basic auth can be used.
-
-
-==========================================
-To confgure TLS
-==========================================
-
----------------
-VNFM Adapter
----------------
-The following parameters can be set to configure the certificate for the VNFM adapter
-server:
-  ssl:
-    key-alias: so@so.onap.org
-    key--store-password: 'ywsqCy:EEo#j}HJHM7z^Rk[L'
-    key-store: classpath:so-vnfm-adapter.p12
-    key-store-type: PKCS12
-The values shown above relate to the certificate included in the VNFM adapter jar which has been generated from AAF. If a different certificate is to be used then these values should be changed accordingly.
-
-The following paramters can be set to configure the trust store for the VNFM adapter:
-http:
-  client:
-    ssl:
-      trust-store: classpath:org.onap.so.trust.jks
-      trust-store-password: ',sx#.C*W)]wVgJC6ccFHI#:H'
-The values shown above relate to the trust store included in the VNFM adapter jar which has been generated from AAI. If a different trust store is to be used then these values should be changed accordingly.
-
-Ensure the value for the below parameter uses https instead of http
-vnfmadapter:
-  endpoint: http://so-vnfm-adapter.onap:9092
-  
----------------
-bpmn-infra
----------------
-For bpmn-infra, ensure the value for the below parameter uses https instead of http
-so:
-  vnfm:
-    adapter:
-      url: https://so-vnfm-adapter.onap:9092/so/vnfm-adapter/v1/
-
-
-==========================================
-To use two way TLS
-==========================================
-
-Ensure the value for username and password are empty in the AAI entry for the VNFM (The VNFM adapter will use oauth instead of two way TLS if the username/password is set).
-Ensure TLS has been configuered as detailed above.
-
----------------
-VNFM adapter
----------------
-Set the following parameter for the VNFM adapter:
-server:
-  ssl:
-    client-auth: need
-	
----------------
-bpmn-infra:
----------------
-Set the following paramters for bpmn-infra:
-rest:
-  http:
-    client:
-      configuration:
-        ssl:
-          keyStore: classpath:org.onap.so.p12
-          keyStorePassword: 'RLe5ExMWW;Kd6GTSt0WQz;.Y'
-          trustStore: classpath:org.onap.so.trust.jks
-          trustStorePassword: '6V%8oSU$,%WbYp3IUe;^mWt4'
-Ensure the value for the below parameter uses https instead of http
-so:
-  vnfm:
-    adapter:
-      url: https://so-vnfm-adapter.onap:9092/so/vnfm-adapter/v1/
-	  
----------------	  
-VNFM simulator:
----------------
-Set the following parameters for the VNFM simulator (if used):
-server:
-  ssl:
-    client-auth: need
-  request:
-    grant:
-      auth: twowaytls
-
-==========================================
-To use oauth token base authentication
-==========================================
-
----------------	  
-VNFM adapter:
----------------
-Ensure the value for username and password set set in the AAI entry for the VNFM. The VNFM adapter will use this username/password as the client credentials in the request for a token for the VNFM. The token endpoint
-for the VNFM will by default will be derived from the service url for the VNFM in AAI as follows: <base of service url>/oauth/token, e.g. if the service url is https://so-vnfm-simulator.onap/vnflcm/v1 then the token url will
-be taken to be https://so-vnfm-simulator.onap/oauth/token. This can be overriden using the following parameter for the VNFM adapter:
-vnfmadapter:
-  temp:
-    vnfm:
-	  oauth:
-	    endpoint:
-		
-The VNFM adapter exposes a token point at url: https://<hostname>:<port>/oauth/token e.g. https://so-vnfm-adapter.onap:9092/oauth/token. The VNFM can request a token from this endpoint for use in grant requests and notifications
-to the VNFM adapter. The username/password to be used in the token request are passed to the VNFM in a subscription request. The username/password sent by the VNFM adpater in the subscription request can be configuered using the 
-following parameter:
-vnfmadapter:
-  auth: <encoded value>
-where <encoded value> is '<username>:<password>' encoded using org.onap.so.utils.CryptoUtils with the key set by the paramter:
-mso:
-  key: <key>
-The default username:password is vnfm-adapter:123456 when vnfm-adapter.auth is not set.
-		  
----------------	  
-VNFM simulator:
----------------
-Set the following parameters for the simulator:
-spring:
-  profiles:
-    active: oauth-authentication
-server:
-  request:
-    grant:
-      auth: oauth
-		
-==========================================
-To use basic auth for notifications
-==========================================		
-The same username/password is used as for oauth token requests as describe above and passed to the VNFM in the subscription request.
-\ No newline at end of file