Removing etsi-sol003-adapter module

Change-Id: If35f94bd8459c08c11d5e178ae872f70a36fd9fa
Issue-ID: SO-3486
Signed-off-by: waqas.ikram <waqas.ikram@est.tech>

1 files changed, 0 insertions, 132 deletions

diff --git a/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt b/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt
deleted file mode 100644
index aaad60320d..0000000000
--- a/adapters/etsi-sol003-adapter/etsi-sol003-adapter-application/Readme.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-The following describes how to configure authentication for the VNFM adapter.

-

-TLS should always be configured to ensure secure communication between the VNFM-adapter <-> BPMN infra and VNFM-adapter <-> VNFM

-If two-way TLS is configured then there is no need for any further authentication (i.e. no need for token or basic auth).

-If two-way TLS is NOT configured then authentication is REQUIRED. Oauth token based authentication must be used for requests, while for notifications either oauth tokens or basic auth can be used.

-

-

-==========================================

-To confgure TLS

-==========================================

-

----------------

-VNFM Adapter

----------------

-The following parameters can be set to configure the certificate for the VNFM adapter

-server:

-  ssl:

-    key-alias: so@so.onap.org

-    key--store-password: 'ywsqCy:EEo#j}HJHM7z^Rk[L'

-    key-store: classpath:so-vnfm-adapter.p12

-    key-store-type: PKCS12

-The values shown above relate to the certificate included in the VNFM adapter jar which has been generated from AAF. If a different certificate is to be used then these values should be changed accordingly.

-

-The following paramters can be set to configure the trust store for the VNFM adapter:

-http:

-  client:

-    ssl:

-      trust-store: classpath:org.onap.so.trust.jks

-      trust-store-password: ',sx#.C*W)]wVgJC6ccFHI#:H'

-The values shown above relate to the trust store included in the VNFM adapter jar which has been generated from AAI. If a different trust store is to be used then these values should be changed accordingly.

-

-Ensure the value for the below parameter uses https instead of http

-vnfmadapter:

-  endpoint: http://so-vnfm-adapter.onap:9092

-  

----------------

-bpmn-infra

----------------

-For bpmn-infra, ensure the value for the below parameter uses https instead of http

-so:

-  vnfm:

-    adapter:

-      url: https://so-vnfm-adapter.onap:9092/so/vnfm-adapter/v1/

-

-

-==========================================

-To use two way TLS

-==========================================

-

-Ensure the value for username and password are empty in the AAI entry for the VNFM (The VNFM adapter will use oauth instead of two way TLS if the username/password is set).

-Ensure TLS has been configuered as detailed above.

-

----------------

-VNFM adapter

----------------

-Set the following parameter for the VNFM adapter:

-server:

-  ssl:

-    client-auth: need

-	

----------------

-bpmn-infra:

----------------

-Set the following paramters for bpmn-infra:

-rest:

-  http:

-    client:

-      configuration:

-        ssl:

-          keyStore: classpath:org.onap.so.p12

-          keyStorePassword: 'RLe5ExMWW;Kd6GTSt0WQz;.Y'

-          trustStore: classpath:org.onap.so.trust.jks

-          trustStorePassword: '6V%8oSU$,%WbYp3IUe;^mWt4'

-Ensure the value for the below parameter uses https instead of http

-so:

-  vnfm:

-    adapter:

-      url: https://so-vnfm-adapter.onap:9092/so/vnfm-adapter/v1/

-	  

----------------	  

-VNFM simulator:

----------------

-Set the following parameters for the VNFM simulator (if used):

-server:

-  ssl:

-    client-auth: need

-  request:

-    grant:

-      auth: twowaytls

-

-==========================================

-To use oauth token base authentication

-==========================================

-

----------------	  

-VNFM adapter:

----------------

-Ensure the value for username and password set set in the AAI entry for the VNFM. The VNFM adapter will use this username/password as the client credentials in the request for a token for the VNFM. The token endpoint

-for the VNFM will by default will be derived from the service url for the VNFM in AAI as follows: <base of service url>/oauth/token, e.g. if the service url is https://so-vnfm-simulator.onap/vnflcm/v1 then the token url will

-be taken to be https://so-vnfm-simulator.onap/oauth/token. This can be overriden using the following parameter for the VNFM adapter:

-vnfmadapter:

-  temp:

-    vnfm:

-	  oauth:

-	    endpoint:

-		

-The VNFM adapter exposes a token point at url: https://<hostname>:<port>/oauth/token e.g. https://so-vnfm-adapter.onap:9092/oauth/token. The VNFM can request a token from this endpoint for use in grant requests and notifications

-to the VNFM adapter. The username/password to be used in the token request are passed to the VNFM in a subscription request. The username/password sent by the VNFM adpater in the subscription request can be configuered using the 

-following parameter:

-vnfmadapter:

-  auth: <encoded value>

-where <encoded value> is '<username>:<password>' encoded using org.onap.so.utils.CryptoUtils with the key set by the paramter:

-mso:

-  key: <key>

-The default username:password is vnfm-adapter:123456 when vnfm-adapter.auth is not set.

-		  

----------------	  

-VNFM simulator:

----------------

-Set the following parameters for the simulator:

-spring:

-  profiles:

-    active: oauth-authentication

-server:

-  request:

-    grant:

-      auth: oauth

-		

-==========================================

-To use basic auth for notifications

-==========================================		

-The same username/password is used as for oauth token requests as describe above and passed to the VNFM in the subscription request.
\ No newline at end of file