diff options
Diffstat (limited to 'platform-logic/lcm/src/main')
3 files changed, 525 insertions, 306 deletions
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml index 92016c83..91c63c95 100644 --- a/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml +++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml @@ -4,19 +4,31 @@ module='LCM' version='${project.version}'>
<method rpc='upgrade-post-check' mode='sync'>
<block>
- <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
method='readProperties'>
- <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+ <parameter name='fileName'
+ value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
<parameter name='contextPrefix' value='prop' />
</execute>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <set>
+ <parameter name='status.code' value='200' />
+ <parameter name='status.message'
+ value='unexpected return from DG' />
+ </set>
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExec'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
<parameter name='Password' value='`prop.ansible.password`' />
- <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`' />
- <parameter name='EnvParameters' value='`$upgrade-post-check-input.payload`' />
- <parameter name='NodeList' value='`$prop.ansible.nodelist`' />
+ <parameter name='LocalParameters'
+ value='`$prop.ansible.lcm.localparameters`' />
+ <parameter name='EnvParameters'
+ value='`$upgrade-post-check-input.payload`' />
+ <parameter name='NodeList'
+ value='`$prop.ansible.nodelist`' />
<parameter name='Timeout' value='`$prop.ansible.timeout`' />
<parameter name='Version' value='`$prop.ansible.version`' />
<parameter name='Id'
@@ -26,19 +38,23 @@ <outcome value='not-found'>
<block>
<set>
- <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code'
- value='200' />
- <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message'
+ <parameter
+ name='$org.onap.appc.adapter.ansible.result.code' value='401' />
+ <parameter name='org.onap.appc.adapter.ansible.message'
value='Ansible Adapter was not found' />
</set>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -58,32 +74,38 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</block>
@@ -91,12 +113,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -116,46 +142,56 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='Other'>
- <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+ <switch test="`$org.onap.appc.adapter.ansible.result.code`">
<outcome value='101'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -175,45 +211,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='500'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -233,44 +279,53 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='100'>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExecResult'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
- <parameter name='Password' value='`$prop.ansible.password`' />
+ <parameter name='Password'
+ value='`$prop.ansible.password`' />
<parameter name='Id'
- value='`$upgrade-post-check-input.common-header.request-id`' />
+ value='`$org.onap.appc.adapter.ansible.Id`' />
<parameter name='PlaybookName'
value='`$prop.lcm.upgrade-post-check.playbookname`' />
@@ -281,12 +336,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -306,46 +365,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='success'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-post-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-post-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-post-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -365,35 +433,40 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='success'>
<parameter name='status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml index 13ff4a68..ee3bbc9d 100644 --- a/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml +++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml @@ -4,19 +4,31 @@ module='LCM' version='${project.version}'>
<method rpc='upgrade-pre-check' mode='sync'>
<block>
- <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
method='readProperties'>
- <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+ <parameter name='fileName'
+ value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
<parameter name='contextPrefix' value='prop' />
</execute>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <set>
+ <parameter name='status.code' value='200' />
+ <parameter name='status.message'
+ value='unexpected return from DG' />
+ </set>
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExec'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
<parameter name='Password' value='`prop.ansible.password`' />
- <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`' />
- <parameter name='EnvParameters' value='`$upgrade-pre-check-input.payload`' />
- <parameter name='NodeList' value='`$prop.ansible.nodelist`' />
+ <parameter name='LocalParameters'
+ value='`$prop.ansible.lcm.localparameters`' />
+ <parameter name='EnvParameters'
+ value='`$upgrade-pre-check-input.payload`' />
+ <parameter name='NodeList'
+ value='`$prop.ansible.nodelist`' />
<parameter name='Timeout' value='`$prop.ansible.timeout`' />
<parameter name='Version' value='`$prop.ansible.version`' />
<parameter name='Id'
@@ -26,19 +38,23 @@ <outcome value='not-found'>
<block>
<set>
- <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code'
- value='200' />
- <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message'
+ <parameter
+ name='org.onap.appc.adapter.ansible.result.code' value='401' />
+ <parameter name='org.onap.appc.adapter.ansible.message'
value='Ansible Adapter was not found' />
</set>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -58,32 +74,38 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</block>
@@ -91,12 +113,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -116,46 +142,56 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='Other'>
- <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+ <switch test="`$org.onap.appc.adapter.ansible.result.code`">
<outcome value='101'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -175,45 +211,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='500'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -233,44 +279,53 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='100'>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExecResult'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
- <parameter name='Password' value='`$prop.ansible.password`' />
+ <parameter name='Password'
+ value='`$prop.ansible.password`' />
<parameter name='Id'
- value='`$upgrade-pre-check-input.common-header.request-id`' />
+ value='`$org.onap.appc.adapter.ansible.Id`' />
<parameter name='PlaybookName'
value='`$prop.lcm.upgrade-pre-check.playbookname`' />
@@ -281,12 +336,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -306,46 +365,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='success'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-pre-check-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-pre-check' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-pre-check-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -365,35 +433,40 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='success'>
<parameter name='status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml index 07fcc82b..71ed77fd 100644 --- a/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml +++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml @@ -4,19 +4,31 @@ module='LCM' version='${project.version}'>
<method rpc='upgrade-software' mode='sync'>
<block>
- <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode'
method='readProperties'>
- <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+ <parameter name='fileName'
+ value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
<parameter name='contextPrefix' value='prop' />
</execute>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <set>
+ <parameter name='status.code' value='200' />
+ <parameter name='status.message'
+ value='unexpected return from DG' />
+ </set>
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExec'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
<parameter name='Password' value='`prop.ansible.password`' />
- <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`' />
- <parameter name='EnvParameters' value='`$upgrade-software-input.payload`' />
- <parameter name='NodeList' value='`$prop.ansible.nodelist`' />
+ <parameter name='LocalParameters'
+ value='`$prop.ansible.lcm.localparameters`' />
+ <parameter name='EnvParameters'
+ value='`$upgrade-software-input.payload`' />
+ <parameter name='NodeList'
+ value='`$prop.ansible.nodelist`' />
<parameter name='Timeout' value='`$prop.ansible.timeout`' />
<parameter name='Version' value='`$prop.ansible.version`' />
<parameter name='Id'
@@ -26,19 +38,23 @@ <outcome value='not-found'>
<block>
<set>
- <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code'
- value='200' />
- <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message'
+ <parameter
+ name='$org.onap.appc.adapter.ansible.result.code' value='401' />
+ <parameter name='org.onap.appc.adapter.ansible.message'
value='Ansible Adapter was not found' />
</set>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -58,32 +74,38 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</block>
@@ -91,12 +113,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -116,46 +142,56 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
- <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
+ <execute
+ plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
<parameter name='contentType' value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='Other'>
- <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+ <switch test="`$org.onap.appc.adapter.ansible.result.code`">
<outcome value='101'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -175,45 +211,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='500'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -233,44 +279,53 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
- <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+ <record
+ plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='100'>
- <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
+ <execute
+ plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter'
method='reqExecResult'>
- <parameter name='AgentUrl' value='`$prop.ansible.agenturl`' />
+ <parameter name='AgentUrl'
+ value='`$prop.ansible.agenturl`' />
<parameter name='User' value='`$prop.ansible.user`' />
- <parameter name='Password' value='`$prop.ansible.password`' />
+ <parameter name='Password'
+ value='`$prop.ansible.password`' />
<parameter name='Id'
- value='`$upgrade-software-input.common-header.request-id`' />
+ value='`$org.onap.appc.adapter.ansible.Id`' />
<parameter name='PlaybookName'
value='`$prop.lcm.upgrade-software.playbookname`' />
@@ -281,12 +336,16 @@ <outcome value='failure'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -306,46 +365,55 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='failure'>
- <parameter name='error-code' value='200' />
- <parameter name='error-message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ <parameter name='status.code' value='401' />
+ <parameter name='status.message'
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
<outcome value='success'>
<block>
<set>
- <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`' />
+ <parameter name='lcm-dmaap.version'
+ value='`$prop.lcm.dmaap.version`' />
<parameter name='lcm-dmaap.correlation-id'
value='`$upgrade-software-input.common-header.sub-request-id`' />
- <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`' />
- <parameter name='lcm-dmaap.rpc-name' value='upgrade-software' />
- <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`' />
+ <parameter name='lcm-dmaap.partition'
+ value='`$prop.lcm.dmaap.partition`' />
+ <parameter name='lcm-dmaap.rpc-name'
+ value='upgrade-software' />
+ <parameter name='lcm-dmaap.type'
+ value='`$prop.lcm.dmaap.type`' />
<parameter name='lcm-dmaap.timestamp'
value='`$upgrade-software-input.common-header.timestamp`' />
<parameter name='lcm-dmaap.api-ver'
@@ -365,35 +433,40 @@ <parameter name='lcm-dmaap.payload'
value='`$org.onap.appc.adapter.ansible.results`' />
<parameter name='lcm-dmaap.status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='lcm-dmaap.status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</set>
<execute
plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode'
method='sendRequest'>
<parameter name='templateFileName'
value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
- <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
- <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
- <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+ <parameter name='restapiUrl'
+ value='`$prop.lcm.dmaap.url`' />
+ <parameter name='restapiUser'
+ value='`$prop.lcm.dmaap.user`' />
+ <parameter name='restapiPassword'
+ value='`$prop.lcm.dmaap.password`' />
<parameter name='format' value='json' />
<parameter name='httpMethod' value='POST' />
- <parameter name='contentType' value='application/json' />
+ <parameter name='contentType'
+ value='application/json' />
<parameter name="responsePrefix" value="lcm" />
<outcome value='failure'>
<record
plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
<parameter name="logger" value="message-log" />
- <parameter name="field1" value='Failed to Publish to DMaap' />
+ <parameter name="field1"
+ value='Failed to Publish to DMaap' />
</record>
</outcome>
</execute>
<return status='success'>
<parameter name='status.code'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+ value='`$org.onap.appc.adapter.ansible.result.code`' />
<parameter name='status.message'
- value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+ value='`$org.onap.appc.adapter.ansible.message`' />
</return>
</block>
</outcome>
|