first commit for new repo

Change-Id: I307341ad768d38a60fb49f96b5b40186c0bd1205
Signed-off-by: Michael Lando <ml636r@att.com>

13 files changed, 961 insertions, 0 deletions

diff --git a/config/cassandra-filters/localhost-bop.properties b/config/cassandra-filters/localhost-bop.properties
new file mode 100644
index 0000000..0cb9ca0
--- /dev/null
+++ b/config/cassandra-filters/localhost-bop.properties
@@ -0,0 +1,10 @@
+cassandra.ip = 127.0.0.1
+cassandra.seed = 127.0.0.1
+# This must be set to prevent Cassandra from self-killing with BOP:
+# https://issues.apache.org/jira/browse/CASSANDRA-5414
+cassandra.token = 0000000000000000000000000000000000
+cassandra.num.tokens =
+cassandra.partitioner = org.apache.cassandra.dht.ByteOrderedPartitioner
+cassandra.dir = ${project.build.directory}/cassandra/data/localhost-bop
+cassandra.clientenc.enabled = false
+cassandra.clientenc.ccert = false
\ No newline at end of file
diff --git a/config/cassandra-filters/localhost-murmur-ssl.properties b/config/cassandra-filters/localhost-murmur-ssl.properties
new file mode 100644
index 0000000..9fc5ea6
--- /dev/null
+++ b/config/cassandra-filters/localhost-murmur-ssl.properties
@@ -0,0 +1,10 @@
+cassandra.ip = 127.0.0.1
+cassandra.seed = 127.0.0.1
+cassandra.token =
+cassandra.num.tokens = num_tokens: 4
+cassandra.partitioner = org.apache.cassandra.dht.Murmur3Partitioner
+cassandra.dir = ${project.build.directory}/cassandra/data/localhost-murmur-ssl
+cassandra.clientenc.enabled = true
+cassandra.clientenc.ccert = false
+cassandra.clientenc.kspath = ${project.build.directory}/cassandra/conf/localhost-murmur-ssl/test.keystore
+cassandra.clientenc.kspw = cassandra
diff --git a/config/cassandra-filters/localhost-murmur.properties b/config/cassandra-filters/localhost-murmur.properties
new file mode 100644
index 0000000..5f148b1
--- /dev/null
+++ b/config/cassandra-filters/localhost-murmur.properties
@@ -0,0 +1,8 @@
+cassandra.ip = 127.0.0.1
+cassandra.seed = 127.0.0.1
+cassandra.token =
+cassandra.num.tokens = num_tokens: 4
+cassandra.partitioner = org.apache.cassandra.dht.Murmur3Partitioner
+cassandra.dir = ${project.build.directory}/cassandra/data/localhost-murmur
+cassandra.clientenc.enabled = false
+cassandra.clientenc.ccert = false
diff --git a/config/cassandra/cassandra-env.sh b/config/cassandra/cassandra-env.sh
new file mode 100644
index 0000000..c296abf
--- /dev/null
+++ b/config/cassandra/cassandra-env.sh
@@ -0,0 +1,124 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+calculate_heap_size()
+{
+    case "`uname`" in
+        Linux)
+            system_memory_in_mb=`free -m | awk '/Mem:/ {print $2}'`
+            MAX_HEAP_SIZE=$((system_memory_in_mb / 2))M
+            return 0
+        ;;
+        FreeBSD)
+            system_memory_in_bytes=`sysctl hw.physmem | awk '{print $2}'`
+            MAX_HEAP_SIZE=$((system_memory_in_bytes / 1024 / 1024 / 2))M
+            return 0
+        ;;
+        *)
+            MAX_HEAP_SIZE=1024M
+            return 1
+        ;;
+    esac
+}
+
+# The amount of memory to allocate to the JVM at startup, you almost
+# certainly want to adjust this for your environment. If left commented
+# out, the heap size will be automatically determined by calculate_heap_size
+# MAX_HEAP_SIZE="4G"
+
+if [ "x$MAX_HEAP_SIZE" = "x" ]; then
+    calculate_heap_size
+fi
+
+# Specifies the default port over which Cassandra will be available for
+# JMX connections.
+JMX_PORT="9090"
+
+# To use mx4j, an HTML interface for JMX, add mx4j-tools.jar to the lib/ directory.
+# By default mx4j listens on 0.0.0.0:8081. Uncomment the following lines to control
+# its listen address and port.
+#MX4J_ADDRESS="-Dmx4jaddress=0.0.0.0"
+#MX4J_PORT="-Dmx4jport=8081"
+
+
+# Here we create the arguments that will get passed to the jvm when
+# starting cassandra.
+
+# enable assertions.  disabling this in production will give a modest
+# performance benefit (around 5%).
+#JVM_OPTS="$JVM_OPTS -ea"
+
+# enable thread priorities, primarily so we can give periodic tasks
+# a lower priority to avoid interfering with client workload
+JVM_OPTS="$JVM_OPTS -XX:+UseThreadPriorities"
+# allows lowering thread priority without being root.  see
+# http://tech.stolsvik.com/2010/01/linux-java-thread-priorities-workaround.html
+JVM_OPTS="$JVM_OPTS -XX:ThreadPriorityPolicy=42"
+
+# min and max heap sizes should be set to the same value to avoid
+# stop-the-world GC pauses during resize, and so that we can lock the
+# heap in memory on startup to prevent any of it from being swapped
+# out.
+JVM_OPTS="$JVM_OPTS -Xms$MAX_HEAP_SIZE"
+JVM_OPTS="$JVM_OPTS -Xmx$MAX_HEAP_SIZE"
+JVM_OPTS="$JVM_OPTS -XX:+HeapDumpOnOutOfMemoryError" 
+
+if [ "`uname`" = "Linux" ] ; then
+    # reduce the per-thread stack size to minimize the impact of Thrift
+    # thread-per-client.  (Best practice is for client connections to
+    # be pooled anyway.) Only do so on Linux where it is known to be
+    # supported.
+    JVM_OPTS="$JVM_OPTS -Xss256k"
+fi
+
+# GC tuning options
+JVM_OPTS="$JVM_OPTS -XX:+UseParNewGC" 
+JVM_OPTS="$JVM_OPTS -XX:+UseConcMarkSweepGC" 
+JVM_OPTS="$JVM_OPTS -XX:+CMSParallelRemarkEnabled" 
+JVM_OPTS="$JVM_OPTS -XX:SurvivorRatio=8" 
+JVM_OPTS="$JVM_OPTS -XX:MaxTenuringThreshold=1"
+JVM_OPTS="$JVM_OPTS -XX:CMSInitiatingOccupancyFraction=75"
+JVM_OPTS="$JVM_OPTS -XX:+UseCMSInitiatingOccupancyOnly"
+
+# GC logging options -- uncomment to enable
+# JVM_OPTS="$JVM_OPTS -XX:+PrintGCDetails"
+# JVM_OPTS="$JVM_OPTS -XX:+PrintGCTimeStamps"
+# JVM_OPTS="$JVM_OPTS -XX:+PrintClassHistogram"
+# JVM_OPTS="$JVM_OPTS -XX:+PrintTenuringDistribution"
+# JVM_OPTS="$JVM_OPTS -XX:+PrintGCApplicationStoppedTime"
+# JVM_OPTS="$JVM_OPTS -Xloggc:/var/log/cassandra/gc.log"
+
+# Prefer binding to IPv4 network intefaces (when net.ipv6.bindv6only=1). See 
+# http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6342561 (short version:
+# comment out this entry to enable IPv6 support).
+JVM_OPTS="$JVM_OPTS -Djava.net.preferIPv4Stack=true"
+
+# jmx: metrics and administration interface
+# 
+# add this if you're having trouble connecting:
+# JVM_OPTS="$JVM_OPTS -Djava.rmi.server.hostname=<public name>"
+# 
+# see 
+# http://blogs.sun.com/jmxetc/entry/troubleshooting_connection_problems_in_jconsole
+# for more on configuring JMX through firewalls, etc. (Short version:
+# get it working with no firewall first.)
+
+# Disable JMX so multiple cassandras can run on 127.0.0.1, .2, .3, etc.
+#JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.port=$JMX_PORT" 
+#JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.ssl=false" 
+#JVM_OPTS="$JVM_OPTS -Dcom.sun.management.jmxremote.authenticate=false" 
+#JVM_OPTS="$JVM_OPTS $MX4J_ADDRESS" 
+#JVM_OPTS="$JVM_OPTS $MX4J_PORT" 
diff --git a/config/cassandra/cassandra.in.sh b/config/cassandra/cassandra.in.sh
new file mode 100644
index 0000000..17e6e15
--- /dev/null
+++ b/config/cassandra/cassandra.in.sh
@@ -0,0 +1,46 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+if [ "x$CASSANDRA_HOME" = "x" ]; then
+    CASSANDRA_HOME=`dirname $0`/..
+fi
+
+# The directory where Cassandra's configs live (required)
+if [ "x$CASSANDRA_CONF" = "x" ]; then
+    CASSANDRA_CONF=$CASSANDRA_HOME/conf
+fi
+
+export MAX_HEAP_SIZE=256m
+
+# This can be the path to a jar file, or a directory containing the 
+# compiled classes. NOTE: This isn't needed by the startup script,
+# it's just used here in constructing the classpath.
+cassandra_bin=$CASSANDRA_HOME/build/classes
+#cassandra_bin=$cassandra_home/build/cassandra.jar
+
+# JAVA_HOME can optionally be set here
+#JAVA_HOME=/usr/local/jdk6
+
+# The java classpath (required)
+CLASSPATH=$CASSANDRA_CONF:$cassandra_bin
+
+for jar in $CASSANDRA_HOME/lib/*.jar; do
+    CLASSPATH=$CLASSPATH:$jar
+done
+
+mkdir -p ${cassandra.dir}
+
+#export MAX_HEAP_SIZE=2048m
diff --git a/config/cassandra/cassandra.yaml b/config/cassandra/cassandra.yaml
new file mode 100644
index 0000000..449582d
--- /dev/null
+++ b/config/cassandra/cassandra.yaml
@@ -0,0 +1,664 @@
+# Cassandra storage config YAML 
+
+# NOTE:
+#   See http://wiki.apache.org/cassandra/StorageConfiguration for
+#   full explanations of configuration directives
+# /NOTE
+
+# The name of the cluster. This is mainly used to prevent machines in
+# one logical cluster from joining another.
+cluster_name: 'Cassandra testing instance'
+
+# This defines the number of tokens randomly assigned to this node on the ring
+# The more tokens, relative to other nodes, the larger the proportion of data
+# that this node will store. You probably want all nodes to have the same number
+# of tokens assuming they have equal hardware capability.
+#
+# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility,
+# and will use the initial_token as described below.
+#
+# Specifying initial_token will override this setting.
+#
+# If you already have a cluster with 1 token per node, and wish to migrate to 
+# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations
+#num_tokens: 256
+
+# initial_token allows you to specify tokens manually.  While you can use # it with
+# vnodes (num_tokens > 1, above) -- in which case you should provide a 
+# comma-separated list -- it's primarily used when adding nodes # to legacy clusters 
+# that do not have vnodes enabled.
+# initial_token:
+
+initial_token: ${cassandra.token}
+
+${cassandra.num.tokens}
+
+# May either be "true" or "false" to enable globally, or contain a list
+# of data centers to enable per-datacenter.
+# hinted_handoff_enabled: DC1,DC2
+# See http://wiki.apache.org/cassandra/HintedHandoff
+hinted_handoff_enabled: true
+# this defines the maximum amount of time a dead host will have hints
+# generated.  After it has been dead this long, new hints for it will not be
+# created until it has been seen alive and gone down again.
+max_hint_window_in_ms: 10800000 # 3 hours
+# Maximum throttle in KBs per second, per delivery thread.  This will be
+# reduced proportionally to the number of nodes in the cluster.  (If there
+# are two nodes in the cluster, each delivery thread will use the maximum
+# rate; if there are three, each will throttle to half of the maximum,
+# since we expect two nodes to be delivering hints simultaneously.)
+hinted_handoff_throttle_in_kb: 1024
+# Number of threads with which to deliver hints;
+# Consider increasing this number when you have multi-dc deployments, since
+# cross-dc handoff tends to be slower
+max_hints_delivery_threads: 2
+
+# Maximum throttle in KBs per second, total. This will be
+# reduced proportionally to the number of nodes in the cluster.
+batchlog_replay_throttle_in_kb: 1024
+
+# Authentication backend, implementing IAuthenticator; used to identify users
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator,
+# PasswordAuthenticator}.
+#
+# - AllowAllAuthenticator performs no checks - set it to disable authentication.
+# - PasswordAuthenticator relies on username/password pairs to authenticate
+#   users. It keeps usernames and hashed passwords in system_auth.credentials table.
+#   Please increase system_auth keyspace replication factor if you use this authenticator.
+authenticator: AllowAllAuthenticator
+
+# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions
+# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer,
+# CassandraAuthorizer}.
+#
+# - AllowAllAuthorizer allows any action to any user - set it to disable authorization.
+# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please
+#   increase system_auth keyspace replication factor if you use this authorizer.
+authorizer: AllowAllAuthorizer
+
+# Validity period for permissions cache (fetching permissions can be an
+# expensive operation depending on the authorizer, CassandraAuthorizer is
+# one example). Defaults to 2000, set to 0 to disable.
+# Will be disabled automatically for AllowAllAuthorizer.
+permissions_validity_in_ms: 2000
+
+# The partitioner is responsible for distributing groups of rows (by
+# partition key) across nodes in the cluster.  You should leave this
+# alone for new clusters.  The partitioner can NOT be changed without
+# reloading all data, so when upgrading you should set this to the
+# same partitioner you were already using.
+#
+# Besides Murmur3Partitioner, partitioners included for backwards
+# compatibility include RandomPartitioner, ByteOrderedPartitioner, and
+# OrderPreservingPartitioner.
+#
+partitioner: ${cassandra.partitioner}
+
+# Directories where Cassandra should store data on disk.  Cassandra
+# will spread data evenly across them, subject to the granularity of
+# the configured compaction strategy.
+data_file_directories:
+    - ${cassandra.dir}/data
+
+# commit log
+commitlog_directory: ${cassandra.dir}/commitlog
+
+# policy for data disk failures:
+# stop_paranoid: shut down gossip and Thrift even for single-sstable errors.
+# stop: shut down gossip and Thrift, leaving the node effectively dead, but
+#       can still be inspected via JMX.
+# best_effort: stop using the failed disk and respond to requests based on
+#              remaining available sstables.  This means you WILL see obsolete
+#              data at CL.ONE!
+# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra
+disk_failure_policy: stop
+
+# policy for commit disk failures:
+# stop: shut down gossip and Thrift, leaving the node effectively dead, but
+#       can still be inspected via JMX.
+# stop_commit: shutdown the commit log, letting writes collect but 
+#              continuing to service reads, as in pre-2.0.5 Cassandra
+# ignore: ignore fatal errors and let the batches fail
+commit_failure_policy: stop
+
+# Maximum size of the key cache in memory.
+#
+# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the
+# minimum, sometimes more. The key cache is fairly tiny for the amount of
+# time it saves, so it's worthwhile to use it at large numbers.
+# The row cache saves even more time, but must contain the entire row,
+# so it is extremely space-intensive. It's best to only use the
+# row cache if you have hot rows or static rows.
+#
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache.
+key_cache_size_in_mb:
+
+# Duration in seconds after which Cassandra should
+# save the key cache. Caches are saved to saved_caches_directory as
+# specified in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 14400 or 4 hours.
+key_cache_save_period: 14400
+
+# Number of keys from the key cache to save
+# Disabled by default, meaning all keys are going to be saved
+# key_cache_keys_to_save: 100
+
+# Maximum size of the row cache in memory.
+# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup.
+#
+# Default value is 0, to disable row caching.
+row_cache_size_in_mb: 0
+
+# Duration in seconds after which Cassandra should
+# safe the row cache. Caches are saved to saved_caches_directory as specified
+# in this configuration file.
+#
+# Saved caches greatly improve cold-start speeds, and is relatively cheap in
+# terms of I/O for the key cache. Row cache saving is much more expensive and
+# has limited use.
+#
+# Default is 0 to disable saving the row cache.
+row_cache_save_period: 0
+
+# Number of keys from the row cache to save
+# Disabled by default, meaning all keys are going to be saved
+# row_cache_keys_to_save: 100
+
+# The off-heap memory allocator.  Affects storage engine metadata as
+# well as caches.  Experiments show that JEMAlloc saves some memory
+# than the native GCC allocator (i.e., JEMalloc is more
+# fragmentation-resistant).
+# 
+# Supported values are: NativeAllocator, JEMallocAllocator
+#
+# If you intend to use JEMallocAllocator you have to install JEMalloc as library and
+# modify cassandra-env.sh as directed in the file.
+#
+# Defaults to NativeAllocator
+# memory_allocator: NativeAllocator
+
+# saved caches
+saved_caches_directory: ${cassandra.dir}/saved_caches
+
+# commitlog_sync may be either "periodic" or "batch." 
+# When in batch mode, Cassandra won't ack writes until the commit log
+# has been fsynced to disk.  It will wait up to
+# commitlog_sync_batch_window_in_ms milliseconds for other writes, before
+# performing the sync.
+#
+# commitlog_sync: batch
+# commitlog_sync_batch_window_in_ms: 50
+#
+# the other option is "periodic" where writes may be acked immediately
+# and the CommitLog is simply synced every commitlog_sync_period_in_ms
+# milliseconds.  By default this allows 1024*(CPU cores) pending
+# entries on the commitlog queue.  If you are writing very large blobs,
+# you should reduce that; 16*cores works reasonably well for 1MB blobs.
+# It should be at least as large as the concurrent_writes setting.
+commitlog_sync: periodic
+commitlog_sync_period_in_ms: 10000
+# commitlog_periodic_queue_size:
+
+# The size of the individual commitlog file segments.  A commitlog
+# segment may be archived, deleted, or recycled once all the data
+# in it (potentially from each columnfamily in the system) has been
+# flushed to sstables.  
+#
+# The default size is 32, which is almost always fine, but if you are
+# archiving commitlog segments (see commitlog_archiving.properties),
+# then you probably want a finer granularity of archiving; 8 or 16 MB
+# is reasonable.
+commitlog_segment_size_in_mb: 32
+
+# any class that implements the SeedProvider interface and has a
+# constructor that takes a Map<String, String> of parameters will do.
+seed_provider:
+    # Addresses of hosts that are deemed contact points. 
+    # Cassandra nodes use this list of hosts to find each other and learn
+    # the topology of the ring.  You must change this if you are running
+    # multiple nodes!
+    - class_name: org.apache.cassandra.locator.SimpleSeedProvider
+      parameters:
+          # seeds is actually a comma-delimited list of addresses.
+          # Ex: "<ip1>,<ip2>,<ip3>"
+          - seeds: ${cassandra.seed}
+
+# For workloads with more data than can fit in memory, Cassandra's
+# bottleneck will be reads that need to fetch data from
+# disk. "concurrent_reads" should be set to (16 * number_of_drives) in
+# order to allow the operations to enqueue low enough in the stack
+# that the OS and drives can reorder them.
+#
+# On the other hand, since writes are almost never IO bound, the ideal
+# number of "concurrent_writes" is dependent on the number of cores in
+# your system; (8 * number_of_cores) is a good rule of thumb.
+concurrent_reads: 32
+concurrent_writes: 32
+
+# Total memory to use for sstable-reading buffers.  Defaults to
+# the smaller of 1/4 of heap or 512MB.
+# file_cache_size_in_mb: 512
+
+# Total memory to use for memtables.  Cassandra will flush the largest
+# memtable when this much memory is used.
+# If omitted, Cassandra will set it to 1/4 of the heap.
+# memtable_total_space_in_mb: 2048
+
+# Total space to use for commitlogs.  Since commitlog segments are
+# mmapped, and hence use up address space, the default size is 32
+# on 32-bit JVMs, and 1024 on 64-bit JVMs.
+#
+# If space gets above this value (it will round up to the next nearest
+# segment multiple), Cassandra will flush every dirty CF in the oldest
+# segment and remove it.  So a small total commitlog space will tend
+# to cause more flush activity on less-active columnfamilies.
+# commitlog_total_space_in_mb: 4096
+
+# This sets the amount of memtable flush writer threads.  These will
+# be blocked by disk io, and each one will hold a memtable in memory
+# while blocked. If you have a large heap and many data directories,
+# you can increase this value for better flush performance.
+# By default this will be set to the amount of data directories defined.
+#memtable_flush_writers: 1
+
+# Whether to, when doing sequential writing, fsync() at intervals in
+# order to force the operating system to flush the dirty
+# buffers. Enable this to avoid sudden dirty buffer flushing from
+# impacting read latencies. Almost always a good idea on SSDs; not
+# necessarily on platters.
+trickle_fsync: false
+trickle_fsync_interval_in_kb: 10240
+
+# TCP port, for commands and data
+storage_port: 7000
+
+# SSL port, for encrypted communication.  Unused unless enabled in
+# encryption_options
+ssl_storage_port: 7001
+
+# Address to bind to and tell other Cassandra nodes to connect to. You
+# _must_ change this if you want multiple nodes to be able to
+# communicate!
+# 
+# Leaving it blank leaves it up to InetAddress.getLocalHost(). This
+# will always do the Right Thing _if_ the node is properly configured
+# (hostname, name resolution, etc), and the Right Thing is to use the
+# address associated with the hostname (it might not be).
+#
+# Setting this to 0.0.0.0 is always wrong.
+listen_address: ${cassandra.ip}
+
+# Address to broadcast to other Cassandra nodes
+# Leaving this blank will set it to the same value as listen_address
+# broadcast_address: 1.2.3.4
+
+# Internode authentication backend, implementing IInternodeAuthenticator;
+# used to allow/disallow connections from peer nodes.
+# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator
+
+# Whether to start the native transport server.
+# Please note that the address on which the native transport is bound is the
+# same as the rpc_address. The port however is different and specified below.
+start_native_transport: true
+# port for the CQL native transport to listen for clients on
+native_transport_port: 9042
+# The maximum threads for handling requests when the native transport is used.
+# This is similar to rpc_max_threads though the default differs slightly (and
+# there is no native_transport_min_threads, idle threads will always be stopped
+# after 30 seconds).
+# native_transport_max_threads: 128
+#
+# The maximum size of allowed frame. Frame (requests) larger than this will
+# be rejected as invalid. The default is 256MB.
+# native_transport_max_frame_size_in_mb: 256
+
+# Whether to start the thrift rpc server.
+start_rpc: true
+
+# The address to bind the Thrift RPC service and native transport
+# server -- clients connect here.
+#
+# Leaving this blank has the same effect it does for ListenAddress,
+# (i.e. it will be based on the configured hostname of the node).
+#
+# Note that unlike ListenAddress above, it is allowed to specify 0.0.0.0
+# here if you want to listen on all interfaces, but that will break clients 
+# that rely on node auto-discovery.
+rpc_address: ${cassandra.ip}
+# port for Thrift to listen for clients on
+rpc_port: 9160
+
+# enable or disable keepalive on rpc/native connections
+rpc_keepalive: true
+
+# Cassandra provides two out-of-the-box options for the RPC Server:
+#
+# sync  -> One thread per thrift connection. For a very large number of clients, memory
+#          will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size
+#          per thread, and that will correspond to your use of virtual memory (but physical memory
+#          may be limited depending on use of stack space).
+#
+# hsha  -> Stands for "half synchronous, half asynchronous." All thrift clients are handled
+#          asynchronously using a small number of threads that does not vary with the amount
+#          of thrift clients (and thus scales well to many clients). The rpc requests are still
+#          synchronous (one thread per active request).
+#
+# The default is sync because on Windows hsha is about 30% slower.  On Linux,
+# sync/hsha performance is about the same, with hsha of course using less memory.
+#
+# Alternatively,  can provide your own RPC server by providing the fully-qualified class name
+# of an o.a.c.t.TServerFactory that can create an instance of it.
+rpc_server_type: sync
+
+# Uncomment rpc_min|max_thread to set request pool size limits.
+#
+# Regardless of your choice of RPC server (see above), the number of maximum requests in the
+# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync
+# RPC server, it also dictates the number of clients that can be connected at all).
+#
+# The default is unlimited and thus provides no protection against clients overwhelming the server. You are
+# encouraged to set a maximum that makes sense for you in production, but do keep in mind that
+# rpc_max_threads represents the maximum number of client requests this server may execute concurrently.
+#
+# rpc_min_threads: 16
+# rpc_max_threads: 2048
+
+# uncomment to set socket buffer sizes on rpc connections
+# rpc_send_buff_size_in_bytes:
+# rpc_recv_buff_size_in_bytes:
+
+# Uncomment to set socket buffer size for internode communication
+# Note that when setting this, the buffer size is limited by net.core.wmem_max
+# and when not setting it it is defined by net.ipv4.tcp_wmem
+# See:
+# /proc/sys/net/core/wmem_max
+# /proc/sys/net/core/rmem_max
+# /proc/sys/net/ipv4/tcp_wmem
+# /proc/sys/net/ipv4/tcp_wmem
+# and: man tcp
+# internode_send_buff_size_in_bytes:
+# internode_recv_buff_size_in_bytes:
+
+# Frame size for thrift (maximum message length).
+thrift_framed_transport_size_in_mb: 15
+
+# Set to true to have Cassandra create a hard link to each sstable
+# flushed or streamed locally in a backups/ subdirectory of the
+# keyspace data.  Removing these links is the operator's
+# responsibility.
+incremental_backups: false
+
+# Whether or not to take a snapshot before each compaction.  Be
+# careful using this option, since Cassandra won't clean up the
+# snapshots for you.  Mostly useful if you're paranoid when there
+# is a data format change.
+snapshot_before_compaction: false
+
+# Whether or not a snapshot is taken of the data before keyspace truncation
+# or dropping of column families. The STRONGLY advised default of true 
+# should be used to provide data safety. If you set this flag to false, you will
+# lose data on truncation or drop.
+auto_snapshot: true
+
+# When executing a scan, within or across a partition, we need to keep the
+# tombstones seen in memory so we can return them to the coordinator, which
+# will use them to make sure other replicas also know about the deleted rows.
+# With workloads that generate a lot of tombstones, this can cause performance
+# problems and even exaust the server heap.
+# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets)
+# Adjust the thresholds here if you understand the dangers and want to
+# scan more tombstones anyway.  These thresholds may also be adjusted at runtime
+# using the StorageService mbean.
+tombstone_warn_threshold: 1000
+tombstone_failure_threshold: 100000
+
+# Add column indexes to a row after its contents reach this size.
+# Increase if your column values are large, or if you have a very large
+# number of columns.  The competing causes are, Cassandra has to
+# deserialize this much of the row to read a single column, so you want
+# it to be small - at least if you do many partial-row reads - but all
+# the index data is read for each access, so you don't want to generate
+# that wastefully either.
+column_index_size_in_kb: 64
+
+
+# Log WARN on any batch size exceeding this value. 5kb per batch by default.
+# Caution should be taken on increasing the size of this threshold as it can lead to node instability.
+batch_size_warn_threshold_in_kb: 5
+
+# Number of simultaneous compactions to allow, NOT including
+# validation "compactions" for anti-entropy repair.  Simultaneous
+# compactions can help preserve read performance in a mixed read/write
+# workload, by mitigating the tendency of small sstables to accumulate
+# during a single long running compactions. The default is usually
+# fine and if you experience problems with compaction running too
+# slowly or too fast, you should look at
+# compaction_throughput_mb_per_sec first.
+#
+# concurrent_compactors defaults to the number of cores.
+# Uncomment to make compaction mono-threaded, the pre-0.8 default.
+#concurrent_compactors: 1
+
+# Throttles compaction to the given total throughput across the entire
+# system. The faster you insert data, the faster you need to compact in
+# order to keep the sstable count down, but in general, setting this to
+# 16 to 32 times the rate you are inserting data is more than sufficient.
+# Setting this to 0 disables throttling. Note that this account for all types
+# of compaction, including validation compaction.
+compaction_throughput_mb_per_sec: 16
+
+# Throttles all outbound streaming file transfers on this node to the
+# given total throughput in Mbps. This is necessary because Cassandra does
+# mostly sequential IO when streaming data during bootstrap or repair, which
+# can lead to saturating the network connection and degrading rpc performance.
+# When unset, the default is 200 Mbps or 25 MB/s.
+# stream_throughput_outbound_megabits_per_sec: 200
+
+# How long the coordinator should wait for read operations to complete
+read_request_timeout_in_ms: 30000
+# How long the coordinator should wait for seq or index scans to complete
+range_request_timeout_in_ms: 30000
+# How long the coordinator should wait for writes to complete
+write_request_timeout_in_ms: 30000
+# How long a coordinator should continue to retry a CAS operation
+# that contends with other proposals for the same row
+cas_contention_timeout_in_ms: 30000
+# How long the coordinator should wait for truncates to complete
+# (This can be much longer, because unless auto_snapshot is disabled
+# we need to flush first so we can snapshot before removing the data.)
+truncate_request_timeout_in_ms: 60000
+# The default timeout for other, miscellaneous operations
+request_timeout_in_ms: 30000
+
+# Enable operation timeout information exchange between nodes to accurately
+# measure request timeouts.  If disabled, replicas will assume that requests
+# were forwarded to them instantly by the coordinator, which means that
+# under overload conditions we will waste that much extra time processing 
+# already-timed-out requests.
+#
+# Warning: before enabling this property make sure to ntp is installed
+# and the times are synchronized between the nodes.
+cross_node_timeout: false
+
+# Enable socket timeout for streaming operation.
+# When a timeout occurs during streaming, streaming is retried from the start
+# of the current file. This _can_ involve re-streaming an important amount of
+# data, so you should avoid setting the value too low.
+# Default value is 0, which never timeout streams.
+# streaming_socket_timeout_in_ms: 0
+
+# phi value that must be reached for a host to be marked down.
+# most users should never need to adjust this.
+# phi_convict_threshold: 8
+
+# endpoint_snitch -- Set this to a class that implements
+# IEndpointSnitch.  The snitch has two functions:
+# - it teaches Cassandra enough about your network topology to route
+#   requests efficiently
+# - it allows Cassandra to spread replicas around your cluster to avoid
+#   correlated failures. It does this by grouping machines into
+#   "datacenters" and "racks."  Cassandra will do its best not to have
+#   more than one replica on the same "rack" (which may not actually
+#   be a physical location)
+#
+# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER,
+# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS
+# ARE PLACED.
+#
+# Out of the box, Cassandra provides
+#  - SimpleSnitch:
+#    Treats Strategy order as proximity. This can improve cache
+#    locality when disabling read repair.  Only appropriate for
+#    single-datacenter deployments.
+#  - GossipingPropertyFileSnitch
+#    This should be your go-to snitch for production use.  The rack
+#    and datacenter for the local node are defined in
+#    cassandra-rackdc.properties and propagated to other nodes via
+#    gossip.  If cassandra-topology.properties exists, it is used as a
+#    fallback, allowing migration from the PropertyFileSnitch.
+#  - PropertyFileSnitch:
+#    Proximity is determined by rack and data center, which are
+#    explicitly configured in cassandra-topology.properties.
+#  - Ec2Snitch:
+#    Appropriate for EC2 deployments in a single Region. Loads Region
+#    and Availability Zone information from the EC2 API. The Region is
+#    treated as the datacenter, and the Availability Zone as the rack.
+#    Only private IPs are used, so this will not work across multiple
+#    Regions.
+#  - Ec2MultiRegionSnitch:
+#    Uses public IPs as broadcast_address to allow cross-region
+#    connectivity.  (Thus, you should set seed addresses to the public
+#    IP as well.) You will need to open the storage_port or
+#    ssl_storage_port on the public IP firewall.  (For intra-Region
+#    traffic, Cassandra will switch to the private IP after
+#    establishing a connection.)
+#  - RackInferringSnitch:
+#    Proximity is determined by rack and data center, which are
+#    assumed to correspond to the 3rd and 2nd octet of each node's IP
+#    address, respectively.  Unless this happens to match your
+#    deployment conventions, this is best used as an example of
+#    writing a custom Snitch class and is provided in that spirit.
+#
+# You can use a custom Snitch by setting this to the full class name
+# of the snitch, which will be assumed to be on your classpath.
+endpoint_snitch: SimpleSnitch
+
+# controls how often to perform the more expensive part of host score
+# calculation
+dynamic_snitch_update_interval_in_ms: 100 
+# controls how often to reset all host scores, allowing a bad host to
+# possibly recover
+dynamic_snitch_reset_interval_in_ms: 600000
+# if set greater than zero and read_repair_chance is < 1.0, this will allow
+# 'pinning' of replicas to hosts in order to increase cache capacity.
+# The badness threshold will control how much worse the pinned host has to be
+# before the dynamic snitch will prefer other replicas over it.  This is
+# expressed as a double which represents a percentage.  Thus, a value of
+# 0.2 means Cassandra would continue to prefer the static snitch values
+# until the pinned host was 20% worse than the fastest.
+dynamic_snitch_badness_threshold: 0.1
+
+# request_scheduler -- Set this to a class that implements
+# RequestScheduler, which will schedule incoming client requests
+# according to the specific policy. This is useful for multi-tenancy
+# with a single Cassandra cluster.
+# NOTE: This is specifically for requests from the client and does
+# not affect inter node communication.
+# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place
+# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of
+# client requests to a node with a separate queue for each
+# request_scheduler_id. The scheduler is further customized by
+# request_scheduler_options as described below.
+request_scheduler: org.apache.cassandra.scheduler.NoScheduler
+
+# Scheduler Options vary based on the type of scheduler
+# NoScheduler - Has no options
+# RoundRobin
+#  - throttle_limit -- The throttle_limit is the number of in-flight
+#                      requests per client.  Requests beyond 
+#                      that limit are queued up until
+#                      running requests can complete.
+#                      The value of 80 here is twice the number of
+#                      concurrent_reads + concurrent_writes.
+#  - default_weight -- default_weight is optional and allows for
+#                      overriding the default which is 1.
+#  - weights -- Weights are optional and will default to 1 or the
+#               overridden default_weight. The weight translates into how
+#               many requests are handled during each turn of the
+#               RoundRobin, based on the scheduler id.
+#
+# request_scheduler_options:
+#    throttle_limit: 80
+#    default_weight: 5
+#    weights:
+#      Keyspace1: 1
+#      Keyspace2: 5
+
+# request_scheduler_id -- An identifier based on which to perform
+# the request scheduling. Currently the only valid option is keyspace.
+# request_scheduler_id: keyspace
+
+# Enable or disable inter-node encryption
+# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that
+# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher
+# suite for authentication, key exchange and encryption of the actual data transfers.
+# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode.
+# NOTE: No custom encryption options are enabled at the moment
+# The available internode options are : all, none, dc, rack
+#
+# If set to dc cassandra will encrypt the traffic between the DCs
+# If set to rack cassandra will encrypt the traffic between the racks
+#
+# The passwords used in these options must match the passwords used when generating
+# the keystore and truststore.  For instructions on generating these files, see:
+# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore
+#
+server_encryption_options:
+    internode_encryption: none
+    keystore: conf/.keystore
+    keystore_password: cassandra
+    truststore: conf/.truststore
+    truststore_password: cassandra
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA]
+    # require_client_auth: false
+
+# enable or disable client/server encryption.
+
+client_encryption_options:
+    enabled: ${cassandra.clientenc.enabled}
+    keystore: ${cassandra.clientenc.kspath}
+    keystore_password: ${cassandra.clientenc.kspw}
+    require_client_auth: ${cassandra.clientenc.ccert}
+    # Set trustore and truststore_password if require_client_auth is true
+    truststore: ${cassandra.clientenc.tspath} #conf/.truststore
+    truststore_password: ${cassandra.clientenc.tspw}
+    # More advanced defaults below:
+    # protocol: TLS
+    # algorithm: SunX509
+    # store_type: JKS
+    cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA]
+    # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_
+
+# internode_compression controls whether traffic between nodes is
+# compressed.
+# can be:  all  - all traffic is compressed
+#          dc   - traffic between different datacenters is compressed
+#          none - nothing is compressed.
+internode_compression: all
+
+# Enable or disable tcp_nodelay for inter-dc communication.
+# Disabling it will result in larger (but fewer) network packets being sent,
+# reducing overhead from the TCP protocol itself, at the cost of increasing
+# latency if you block for cross-datacenter responses.
+inter_dc_tcp_nodelay: false
diff --git a/config/cassandra/log4j-empty.properties b/config/cassandra/log4j-empty.properties
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/config/cassandra/log4j-empty.properties
diff --git a/config/cassandra/log4j-server.properties b/config/cassandra/log4j-server.properties
new file mode 100644
index 0000000..5940a91
--- /dev/null
+++ b/config/cassandra/log4j-server.properties
@@ -0,0 +1,41 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# for production, you should probably set pattern to %c instead of %l.  
+# (%l is slower.)
+
+# output messages into a rolling log file as well as stdout
+log4j.rootLogger=INFO,stdout,R
+
+# stdout
+log4j.appender.stdout=org.apache.log4j.ConsoleAppender
+log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
+log4j.appender.stdout.layout.ConversionPattern=%5p %d{HH:mm:ss,SSS} %m%n
+
+# rolling log file
+log4j.appender.R=org.apache.log4j.RollingFileAppender
+log4j.appender.R.maxFileSize=20MB
+log4j.appender.R.maxBackupIndex=50
+log4j.appender.R.layout=org.apache.log4j.PatternLayout
+log4j.appender.R.layout.ConversionPattern=%5p [%t] %d{ISO8601} %F (line %L) %m%n
+# Edit the next line to point to your logs directory
+log4j.appender.R.File=${cassandra.dir}/system.log
+
+# Application logging options
+#log4j.logger.org.apache.cassandra=DEBUG
+#log4j.logger.org.apache.cassandra.graph=DEBUG
+#log4j.logger.org.apache.cassandra.service.StorageProxy=DEBUG
+
diff --git a/config/cassandra/log4j-tools.properties b/config/cassandra/log4j-tools.properties
new file mode 100644
index 0000000..a8f4d9f
--- /dev/null
+++ b/config/cassandra/log4j-tools.properties
@@ -0,0 +1,27 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# for production, you should probably set the root to INFO
+# and the pattern to %c instead of %l.  (%l is slower.)
+
+# output messages into a rolling log file as well as stdout
+log4j.rootLogger=WARN,stderr
+
+# stderr
+log4j.appender.stderr=org.apache.log4j.ConsoleAppender
+log4j.appender.stderr.target=System.err
+log4j.appender.stderr.layout=org.apache.log4j.PatternLayout
+log4j.appender.stderr.layout.ConversionPattern=%5p %d{HH:mm:ss,SSS} %m%n
diff --git a/config/static/README.md b/config/static/README.md
new file mode 100644
index 0000000..961fb89
--- /dev/null
+++ b/config/static/README.md
@@ -0,0 +1,3 @@
+This keypair is just for testing.  Under no circumstances should it be
+used on any system that matters.  It's been public on github and
+compromised since the day it was generated.
\ No newline at end of file
diff --git a/config/static/test.keystore b/config/static/test.keystore
new file mode 100644
index 0000000..729078c
--- /dev/null
+++ b/config/static/test.keystore
diff --git a/config/static/test.truststore b/config/static/test.truststore
new file mode 100644
index 0000000..005300c
--- /dev/null
+++ b/config/static/test.truststore
diff --git a/config/whirr-cassandra.properties b/config/whirr-cassandra.properties
new file mode 100644
index 0000000..3b87869
--- /dev/null
+++ b/config/whirr-cassandra.properties
@@ -0,0 +1,28 @@
+# A Whirr Receipe for Cassandra + Hadoop
+# Read the Configuration Guide for more info:
+# http://whirr.apache.org/docs/latest/configuration-guide.html
+
+# Change the cluster name here
+whirr.cluster-name=cassandra-hadoop
+
+# Change the number of machines in the cluster here
+whirr.instance-templates=1 zookeeper+hadoop-namenode+hadoop-jobtracker,3 hadoop-datanode+hadoop-tasktracker+cassandra
+
+# For EC2 set AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY environment variables.
+whirr.provider=aws-ec2
+whirr.identity=${env:AWS_ACCESS_KEY_ID}
+whirr.credential=${env:AWS_SECRET_ACCESS_KEY}
+whirr.cluster-user=ec2-user
+
+# The size of the instance to use. See http://aws.amazon.com/ec2/instance-types/
+whirr.hardware-id=m1.large
+whirr.location-id=us-east-1
+
+# By default use the user system SSH keys. Override them here.
+# whirr.private-key-file=${sys:user.home}/.ssh/id_rsa
+# whirr.public-key-file=${whirr.private-key-file}.pub
+
+whirr.cassandra.version.major=1.2.0
+whirr.cassandra.tarball.url=http://archive.apache.org/dist/cassandra/1.2.0/apache-cassandra-1.2.0-bin.tar.gz
+# whirr.cassandra.tarball.url=http://archive.apache.org/dist/cassandra/1.1.3/apache-cassandra-1.1.3-bin.tar.gz
+whirr.hadoop.tarball.url=http://archive.apache.org/dist/hadoop/core/hadoop-1.0.3/hadoop-1.0.3.tar.gz