diff options
Diffstat (limited to 'sdc-os-chef/sdc-cassandra/chef-repo/cookbooks')
10 files changed, 1555 insertions, 0 deletions
diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb new file mode 100644 index 0000000000..9313aa87ff --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/01-configureCassandra.rb @@ -0,0 +1,49 @@ +cluster_name = '' +cluster_name = node['cassandra'][:cluster_name]+node.chef_environment + +cas_ips='' +cas_ips=node['Nodes'][:CS] + +interface = node['interfaces']['application'] +application_host = '' +node['network']['interfaces'][interface][:addresses].each do | addr , details | + if details['family'] == ('inet') + application_host = addr + end +end + + +template "cassandra-yaml-config" do + path "/etc/cassandra/cassandra.yaml" + source "cassandra.yaml.erb" + owner "cassandra" + group "cassandra" + mode "0755" + variables ({ + :cassandra_cluster => cluster_name, + :cassandra_data_dir => node['cassandra'][:data_dir], + :cassandra_commitlog_dir => node['cassandra'][:commitlog_dir], + :cassandra_cache_dir => node['cassandra'][:cache_dir], + :seeds_address => cas_ips, + :listen_address => application_host, + :broadcast_address => application_host, + :broadcast_rpc_address => application_host, + :rpc_address => "0.0.0.0", + :num_tokens => node['cassandra'][:num_tokens], + :internode_encryption => "none", + :cassandra_truststore_dir => "/etc/cassandra/cs_trust" + }) +end + +rackNum=1 +template "cassandra-rackdc.properties" do + path "/etc/cassandra/cassandra-rackdc.properties" + source "cassandra-rackdc.properties.erb" + owner "cassandra" + group "cassandra" + mode "0755" + variables ({ + :dc => "DC-"+node.chef_environment, + :rack => "Rack"+"#{rackNum}-"+node.chef_environment + }) +end diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb new file mode 100644 index 0000000000..627bd6fe7e --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/02-createCsUser.rb @@ -0,0 +1,8 @@ +template "/tmp/create_cassandra_user.sh" do + source "create_cassandra_user.sh.erb" + mode 0755 + variables({ + :cassandra_ip => "HOSTIP" + }) +end + diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb new file mode 100644 index 0000000000..92a81eb7dc --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/03-createDoxKeyspace.rb @@ -0,0 +1,8 @@ +template "/tmp/create_dox_keyspace.sh" do + source "create_dox_keyspace.sh.erb" + mode 0755 + variables({ + :cassandra_ip => "HOSTIP" + }) +end + diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb new file mode 100644 index 0000000000..7c40c509c2 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/recipes/04-schemaCreation.rb @@ -0,0 +1,35 @@ +cookbook_file "/tmp/sdctool.tar" do + source "sdctool.tar" + mode 0755 +end + +## extract sdctool.tar +bash "install tar" do + cwd "/tmp" + code <<-EOH + /bin/tar xvf /tmp/sdctool.tar -C /tmp + EOH +end + + +template "/tmp/sdctool/config/configuration.yaml" do + source "configuration.yaml.erb" + mode 0755 + variables({ + :host_ip => node['HOST_IP'], + :catalog_port => node['BE'][:http_port], + :ssl_port => node['BE'][:https_port], + :cassandra_ip => node['Nodes']['CS'], + :rep_factor => 1, + :dc1 => "DC-"+node.chef_environment + }) +end + +template "/tmp/sdctool/config/elasticsearch.yml" do + source "elasticsearch.yml.erb" + mode 0755 + variables({ + :elastic_ip => "HOSTIP" + }) +end + diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb new file mode 100644 index 0000000000..23ddcdd545 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra-rackdc.properties.erb @@ -0,0 +1,27 @@ +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# These properties are used with GossipingPropertyFileSnitch and will +# indicate the rack and dc for this node +dc=<%= @dc %> +rack=<%= @rack %> + +# Add a suffix to a datacenter name. Used by the Ec2Snitch and Ec2MultiRegionSnitch +# to append a string to the EC2 region name. +#dc_suffix= + +# Uncomment the following line to make this snitch prefer the internal ip when possible, as the Ec2MultiRegionSnitch does. +# prefer_local=true diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb new file mode 100644 index 0000000000..d4b6032d00 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/cassandra.yaml.erb @@ -0,0 +1,824 @@ +# Cassandra storage config YAML + +# NOTE: +# See http://wiki.apache.org/cassandra/StorageConfiguration for +# full explanations of configuration directives +# /NOTE + +# The name of the cluster. This is mainly used to prevent machines in +# one logical cluster from joining another. +cluster_name: '<%= @cassandra_cluster %>' + +# This defines the number of tokens randomly assigned to this node on the ring +# The more tokens, relative to other nodes, the larger the proportion of data +# that this node will store. You probably want all nodes to have the same number +# of tokens assuming they have equal hardware capability. +# +# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility, +# and will use the initial_token as described below. +# +# Specifying initial_token will override this setting on the node's initial start, +# on subsequent starts, this setting will apply even if initial token is set. +# +# If you already have a cluster with 1 token per node, and wish to migrate to +# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations +num_tokens: <%= @num_tokens %> + +# initial_token allows you to specify tokens manually. While you can use # it with +# vnodes (num_tokens > 1, above) -- in which case you should provide a +# comma-separated list -- it's primarily used when adding nodes # to legacy clusters +# that do not have vnodes enabled. +# initial_token: + +# May either be "true" or "false" to enable globally, or contain a list +# of data centers to enable per-datacenter. +# hinted_handoff_enabled: DC1,DC2 +# See http://wiki.apache.org/cassandra/HintedHandoff +hinted_handoff_enabled: <%= node['cassandra']['hinted_handoff_enabled'] %> + +# this defines the maximum amount of time a dead host will have hints +# generated. After it has been dead this long, new hints for it will not be +# created until it has been seen alive and gone down again. +max_hint_window_in_ms: 10800000 # 3 hours + +# Maximum throttle in KBs per second, per delivery thread. This will be +# reduced proportionally to the number of nodes in the cluster. (If there +# are two nodes in the cluster, each delivery thread will use the maximum +# rate; if there are three, each will throttle to half of the maximum, +# since we expect two nodes to be delivering hints simultaneously.) +hinted_handoff_throttle_in_kb: 1024 + +# Number of threads with which to deliver hints; +# Consider increasing this number when you have multi-dc deployments, since +# cross-dc handoff tends to be slower +max_hints_delivery_threads: 2 + +# Maximum throttle in KBs per second, total. This will be +# reduced proportionally to the number of nodes in the cluster. +batchlog_replay_throttle_in_kb: 1024 + +# Authentication backend, implementing IAuthenticator; used to identify users +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator, +# PasswordAuthenticator}. +# +# - AllowAllAuthenticator performs no checks - set it to disable authentication. +# - PasswordAuthenticator relies on username/password pairs to authenticate +# users. It keeps usernames and hashed passwords in system_auth.credentials table. +# Please increase system_auth keyspace replication factor if you use this authenticator. +authenticator: PasswordAuthenticator + +# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer, +# CassandraAuthorizer}. +# +# - AllowAllAuthorizer allows any action to any user - set it to disable authorization. +# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please +# increase system_auth keyspace replication factor if you use this authorizer. +authorizer: AllowAllAuthorizer + +# Validity period for permissions cache (fetching permissions can be an +# expensive operation depending on the authorizer, CassandraAuthorizer is +# one example). Defaults to 2000, set to 0 to disable. +# Will be disabled automatically for AllowAllAuthorizer. +permissions_validity_in_ms: 2000 + +# Refresh interval for permissions cache (if enabled). +# After this interval, cache entries become eligible for refresh. Upon next +# access, an async reload is scheduled and the old value returned until it +# completes. If permissions_validity_in_ms is non-zero, then this must be +# also. +# Defaults to the same value as permissions_validity_in_ms. +# permissions_update_interval_in_ms: 1000 + +# The partitioner is responsible for distributing groups of rows (by +# partition key) across nodes in the cluster. You should leave this +# alone for new clusters. The partitioner can NOT be changed without +# reloading all data, so when upgrading you should set this to the +# same partitioner you were already using. +# +# Besides Murmur3Partitioner, partitioners included for backwards +# compatibility include RandomPartitioner, ByteOrderedPartitioner, and +# OrderPreservingPartitioner. +# +partitioner: org.apache.cassandra.dht.Murmur3Partitioner + +# Directories where Cassandra should store data on disk. Cassandra +# will spread data evenly across them, subject to the granularity of +# the configured compaction strategy. +data_file_directories: + - <%= @cassandra_data_dir %> + + +# commit log. when running on magnetic HDD, this should be a +# separate spindle than the data directories. +# If not set, the default directory is $CASSANDRA_HOME/data/commitlog. +commitlog_directory: <%= @cassandra_commitlog_dir %> + +# policy for data disk failures: +# stop_paranoid: shut down gossip and Thrift even for single-sstable errors. +# stop: shut down gossip and Thrift, leaving the node effectively dead, but +# can still be inspected via JMX. +# best_effort: stop using the failed disk and respond to requests based on +# remaining available sstables. This means you WILL see obsolete +# data at CL.ONE! +# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra +disk_failure_policy: stop + +# policy for commit disk failures: +# stop: shut down gossip and Thrift, leaving the node effectively dead, but +# can still be inspected via JMX. +# stop_commit: shutdown the commit log, letting writes collect but +# continuing to service reads, as in pre-2.0.5 Cassandra +# ignore: ignore fatal errors and let the batches fail +commit_failure_policy: stop + +# Maximum size of the key cache in memory. +# +# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the +# minimum, sometimes more. The key cache is fairly tiny for the amount of +# time it saves, so it's worthwhile to use it at large numbers. +# The row cache saves even more time, but must contain the entire row, +# so it is extremely space-intensive. It's best to only use the +# row cache if you have hot rows or static rows. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache. +key_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the key cache. Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 14400 or 4 hours. +key_cache_save_period: 14400 + +# Number of keys from the key cache to save +# Disabled by default, meaning all keys are going to be saved +# key_cache_keys_to_save: 100 + +# Maximum size of the row cache in memory. +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is 0, to disable row caching. +row_cache_size_in_mb: 0 + +# Duration in seconds after which Cassandra should +# save the row cache. Caches are saved to saved_caches_directory as specified +# in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 0 to disable saving the row cache. +row_cache_save_period: 0 + +# Number of keys from the row cache to save +# Disabled by default, meaning all keys are going to be saved +# row_cache_keys_to_save: 100 + +# Maximum size of the counter cache in memory. +# +# Counter cache helps to reduce counter locks' contention for hot counter cells. +# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before +# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration +# of the lock hold, helping with hot counter cell updates, but will not allow skipping +# the read entirely. Only the local (clock, count) tuple of a counter cell is kept +# in memory, not the whole counter, so it's relatively cheap. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache. +# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache. +counter_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the counter cache (keys only). Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Default is 7200 or 2 hours. +counter_cache_save_period: 7200 + +# Number of keys from the counter cache to save +# Disabled by default, meaning all keys are going to be saved +# counter_cache_keys_to_save: 100 + +# The off-heap memory allocator. Affects storage engine metadata as +# well as caches. Experiments show that JEMAlloc saves some memory +# than the native GCC allocator (i.e., JEMalloc is more +# fragmentation-resistant). +# +# Supported values are: NativeAllocator, JEMallocAllocator +# +# If you intend to use JEMallocAllocator you have to install JEMalloc as library and +# modify cassandra-env.sh as directed in the file. +# +# Defaults to NativeAllocator +# memory_allocator: NativeAllocator + +# saved caches +# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches. +saved_caches_directory: /var/lib/cassandra/saved_caches + +# commitlog_sync may be either "periodic" or "batch." +# When in batch mode, Cassandra won't ack writes until the commit log +# has been fsynced to disk. It will wait +# commitlog_sync_batch_window_in_ms milliseconds between fsyncs. +# This window should be kept short because the writer threads will +# be unable to do extra work while waiting. (You may need to increase +# concurrent_writes for the same reason.) +# +# commitlog_sync: batch +# commitlog_sync_batch_window_in_ms: 2 +# +# the other option is "periodic" where writes may be acked immediately +# and the CommitLog is simply synced every commitlog_sync_period_in_ms +# milliseconds. By default this allows 1024*(CPU cores) pending +# entries on the commitlog queue. If you are writing very large blobs, +# you should reduce that; 16*cores works reasonably well for 1MB blobs. +# It should be at least as large as the concurrent_writes setting. +commitlog_sync: periodic +commitlog_sync_period_in_ms: 10000 + +# The size of the individual commitlog file segments. A commitlog +# segment may be archived, deleted, or recycled once all the data +# in it (potentially from each columnfamily in the system) has been +# flushed to sstables. +# +# The default size is 32, which is almost always fine, but if you are +# archiving commitlog segments (see commitlog_archiving.properties), +# then you probably want a finer granularity of archiving; 8 or 16 MB +# is reasonable. +commitlog_segment_size_in_mb: 32 + +# Reuse commit log files when possible. The default is false, and this +# feature will be removed entirely in future versions of Cassandra. +#commitlog_segment_recycling: false + +# any class that implements the SeedProvider interface and has a +# constructor that takes a Map<String, String> of parameters will do. +seed_provider: + # Addresses of hosts that are deemed contact points. + # Cassandra nodes use this list of hosts to find each other and learn + # the topology of the ring. You must change this if you are running + # multiple nodes! + - class_name: org.apache.cassandra.locator.SimpleSeedProvider + parameters: + # seeds is actually a comma-delimited list of addresses. + # Ex: "<ip1>,<ip2>,<ip3>" + - seeds: "<%= @seeds_address %>" + +# For workloads with more data than can fit in memory, Cassandra's +# bottleneck will be reads that need to fetch data from +# disk. "concurrent_reads" should be set to (16 * number_of_drives) in +# order to allow the operations to enqueue low enough in the stack +# that the OS and drives can reorder them. Same applies to +# "concurrent_counter_writes", since counter writes read the current +# values before incrementing and writing them back. +# +# On the other hand, since writes are almost never IO bound, the ideal +# number of "concurrent_writes" is dependent on the number of cores in +# your system; (8 * number_of_cores) is a good rule of thumb. +concurrent_reads: <%= node['cassandra']['concurrent_reads'] %> +concurrent_writes: <%= node['cassandra']['concurrent_writes'] %> +concurrent_counter_writes: 32 + + +# Total memory to use for sstable-reading buffers. Defaults to +# the smaller of 1/4 of heap or 512MB. +# file_cache_size_in_mb: 512 + +# Total permitted memory to use for memtables. Cassandra will stop +# accepting writes when the limit is exceeded until a flush completes, +# and will trigger a flush based on memtable_cleanup_threshold +# If omitted, Cassandra will set both to 1/4 the size of the heap. +# memtable_heap_space_in_mb: 2048 +# memtable_offheap_space_in_mb: 2048 + +# Ratio of occupied non-flushing memtable size to total permitted size +# that will trigger a flush of the largest memtable. Lager mct will +# mean larger flushes and hence less compaction, but also less concurrent +# flush activity which can make it difficult to keep your disks fed +# under heavy write load. +# +# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1) +# memtable_cleanup_threshold: 0.11 + +# Specify the way Cassandra allocates and manages memtable memory. +# Options are: +# heap_buffers: on heap nio buffers +# offheap_buffers: off heap (direct) nio buffers +# offheap_objects: native memory, eliminating nio buffer heap overhead +memtable_allocation_type: heap_buffers + +# Total space to use for commitlogs. Since commitlog segments are +# mmapped, and hence use up address space, the default size is 32 +# on 32-bit JVMs, and 8192 on 64-bit JVMs. +# +# If space gets above this value (it will round up to the next nearest +# segment multiple), Cassandra will flush every dirty CF in the oldest +# segment and remove it. So a small total commitlog space will tend +# to cause more flush activity on less-active columnfamilies. +# commitlog_total_space_in_mb: 8192 + +# This sets the amount of memtable flush writer threads. These will +# be blocked by disk io, and each one will hold a memtable in memory +# while blocked. +# +# memtable_flush_writers defaults to the smaller of (number of disks, +# number of cores), with a minimum of 2 and a maximum of 8. +# +# If your data directories are backed by SSD, you should increase this +# to the number of cores. +#memtable_flush_writers: 8 + +# A fixed memory pool size in MB for for SSTable index summaries. If left +# empty, this will default to 5% of the heap size. If the memory usage of +# all index summaries exceeds this limit, SSTables with low read rates will +# shrink their index summaries in order to meet this limit. However, this +# is a best-effort process. In extreme conditions Cassandra may need to use +# more than this amount of memory. +index_summary_capacity_in_mb: + +# How frequently index summaries should be resampled. This is done +# periodically to redistribute memory from the fixed-size pool to sstables +# proportional their recent read rates. Setting to -1 will disable this +# process, leaving existing index summaries at their current sampling level. +index_summary_resize_interval_in_minutes: 60 + +# Whether to, when doing sequential writing, fsync() at intervals in +# order to force the operating system to flush the dirty +# buffers. Enable this to avoid sudden dirty buffer flushing from +# impacting read latencies. Almost always a good idea on SSDs; not +# necessarily on platters. +trickle_fsync: false +trickle_fsync_interval_in_kb: 10240 + +# TCP port, for commands and data +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +storage_port: 7000 + +# SSL port, for encrypted communication. Unused unless enabled in +# encryption_options +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +ssl_storage_port: 7001 + +# Address or interface to bind to and tell other Cassandra nodes to connect to. +# You _must_ change this if you want multiple nodes to be able to communicate! +# +# Set listen_address OR listen_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# +# Leaving it blank leaves it up to InetAddress.getLocalHost(). This +# will always do the Right Thing _if_ the node is properly configured +# (hostname, name resolution, etc), and the Right Thing is to use the +# address associated with the hostname (it might not be). +# +# Setting listen_address to 0.0.0.0 is always wrong. +# +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +listen_address: <%= @listen_address %> +# listen_interface: eth0 +# listen_interface_prefer_ipv6: false + +# Address to broadcast to other Cassandra nodes +# Leaving this blank will set it to the same value as listen_address +broadcast_address: <%= @broadcast_address %> + +# Internode authentication backend, implementing IInternodeAuthenticator; +# used to allow/disallow connections from peer nodes. +# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator + +# Whether to start the native transport server. +# Please note that the address on which the native transport is bound is the +# same as the rpc_address. The port however is different and specified below. +start_native_transport: true +# port for the CQL native transport to listen for clients on +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +native_transport_port: 9042 +# The maximum threads for handling requests when the native transport is used. +# This is similar to rpc_max_threads though the default differs slightly (and +# there is no native_transport_min_threads, idle threads will always be stopped +# after 30 seconds). +# native_transport_max_threads: 128 +# +# The maximum size of allowed frame. Frame (requests) larger than this will +# be rejected as invalid. The default is 256MB. +# native_transport_max_frame_size_in_mb: 256 + +# The maximum number of concurrent client connections. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections: -1 + +# The maximum number of concurrent client connections per source ip. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections_per_ip: -1 + +# Whether to start the thrift rpc server. +start_rpc: true + +# The address or interface to bind the Thrift RPC service and native transport +# server to. +# +# Set rpc_address OR rpc_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# +# Leaving rpc_address blank has the same effect as on listen_address +# (i.e. it will be based on the configured hostname of the node). +# +# Note that unlike listen_address, you can specify 0.0.0.0, but you must also +# set broadcast_rpc_address to a value other than 0.0.0.0. +# +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +# +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +rpc_address: <%= @rpc_address %> +# rpc_interface: eth1 +# rpc_interface_prefer_ipv6: false + +# port for Thrift to listen for clients on +rpc_port: 9160 + +# RPC address to broadcast to drivers and other Cassandra nodes. This cannot +# be set to 0.0.0.0. If left blank, this will be set to the value of +# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must +# be set. +broadcast_rpc_address: <%= @broadcast_rpc_address %> + +# enable or disable keepalive on rpc/native connections +rpc_keepalive: true + +# Cassandra provides two out-of-the-box options for the RPC Server: +# +# sync -> One thread per thrift connection. For a very large number of clients, memory +# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size +# per thread, and that will correspond to your use of virtual memory (but physical memory +# may be limited depending on use of stack space). +# +# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled +# asynchronously using a small number of threads that does not vary with the amount +# of thrift clients (and thus scales well to many clients). The rpc requests are still +# synchronous (one thread per active request). If hsha is selected then it is essential +# that rpc_max_threads is changed from the default value of unlimited. +# +# The default is sync because on Windows hsha is about 30% slower. On Linux, +# sync/hsha performance is about the same, with hsha of course using less memory. +# +# Alternatively, can provide your own RPC server by providing the fully-qualified class name +# of an o.a.c.t.TServerFactory that can create an instance of it. +rpc_server_type: sync + +# Uncomment rpc_min|max_thread to set request pool size limits. +# +# Regardless of your choice of RPC server (see above), the number of maximum requests in the +# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync +# RPC server, it also dictates the number of clients that can be connected at all). +# +# The default is unlimited and thus provides no protection against clients overwhelming the server. You are +# encouraged to set a maximum that makes sense for you in production, but do keep in mind that +# rpc_max_threads represents the maximum number of client requests this server may execute concurrently. +# +# rpc_min_threads: 16 +# rpc_max_threads: 2048 + +# uncomment to set socket buffer sizes on rpc connections +# rpc_send_buff_size_in_bytes: +# rpc_recv_buff_size_in_bytes: + +# Uncomment to set socket buffer size for internode communication +# Note that when setting this, the buffer size is limited by net.core.wmem_max +# and when not setting it it is defined by net.ipv4.tcp_wmem +# See: +# /proc/sys/net/core/wmem_max +# /proc/sys/net/core/rmem_max +# /proc/sys/net/ipv4/tcp_wmem +# /proc/sys/net/ipv4/tcp_wmem +# and: man tcp +# internode_send_buff_size_in_bytes: +# internode_recv_buff_size_in_bytes: + +# Frame size for thrift (maximum message length). +thrift_framed_transport_size_in_mb: 15 + +# Set to true to have Cassandra create a hard link to each sstable +# flushed or streamed locally in a backups/ subdirectory of the +# keyspace data. Removing these links is the operator's +# responsibility. +incremental_backups: false + +# Whether or not to take a snapshot before each compaction. Be +# careful using this option, since Cassandra won't clean up the +# snapshots for you. Mostly useful if you're paranoid when there +# is a data format change. +snapshot_before_compaction: false + +# Whether or not a snapshot is taken of the data before keyspace truncation +# or dropping of column families. The STRONGLY advised default of true +# should be used to provide data safety. If you set this flag to false, you will +# lose data on truncation or drop. +auto_snapshot: true + +# When executing a scan, within or across a partition, we need to keep the +# tombstones seen in memory so we can return them to the coordinator, which +# will use them to make sure other replicas also know about the deleted rows. +# With workloads that generate a lot of tombstones, this can cause performance +# problems and even exaust the server heap. +# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets) +# Adjust the thresholds here if you understand the dangers and want to +# scan more tombstones anyway. These thresholds may also be adjusted at runtime +# using the StorageService mbean. +tombstone_warn_threshold: 1000 +tombstone_failure_threshold: 100000 + +# Granularity of the collation index of rows within a partition. +# Increase if your rows are large, or if you have a very large +# number of rows per partition. The competing goals are these: +# 1) a smaller granularity means more index entries are generated +# and looking up rows withing the partition by collation column +# is faster +# 2) but, Cassandra will keep the collation index in memory for hot +# rows (as part of the key cache), so a larger granularity means +# you can cache more hot rows +column_index_size_in_kb: 64 + + +# Log WARN on any batch size exceeding this value. 5kb per batch by default. +# Caution should be taken on increasing the size of this threshold as it can lead to node instability. +batch_size_warn_threshold_in_kb: 5 + + +# Log WARN on any batches not of type LOGGED than span across more partitions than this limit +unlogged_batch_across_partitions_warn_threshold: 10 + +# Number of simultaneous compactions to allow, NOT including +# validation "compactions" for anti-entropy repair. Simultaneous +# compactions can help preserve read performance in a mixed read/write +# workload, by mitigating the tendency of small sstables to accumulate +# during a single long running compactions. The default is usually +# fine and if you experience problems with compaction running too +# slowly or too fast, you should look at +# compaction_throughput_mb_per_sec first. +# +# concurrent_compactors defaults to the smaller of (number of disks, +# number of cores), with a minimum of 2 and a maximum of 8. +# +# If your data directories are backed by SSD, you should increase this +# to the number of cores. +#concurrent_compactors: 1 + +# Throttles compaction to the given total throughput across the entire +# system. The faster you insert data, the faster you need to compact in +# order to keep the sstable count down, but in general, setting this to +# 16 to 32 times the rate you are inserting data is more than sufficient. +# Setting this to 0 disables throttling. Note that this account for all types +# of compaction, including validation compaction. +compaction_throughput_mb_per_sec: 16 + +# Log a warning when compacting partitions larger than this value +compaction_large_partition_warning_threshold_mb: 100 + +# When compacting, the replacement sstable(s) can be opened before they +# are completely written, and used in place of the prior sstables for +# any range that has been written. This helps to smoothly transfer reads +# between the sstables, reducing page cache churn and keeping hot rows hot +sstable_preemptive_open_interval_in_mb: 50 + +# Throttles all outbound streaming file transfers on this node to the +# given total throughput in Mbps. This is necessary because Cassandra does +# mostly sequential IO when streaming data during bootstrap or repair, which +# can lead to saturating the network connection and degrading rpc performance. +# When unset, the default is 200 Mbps or 25 MB/s. +# stream_throughput_outbound_megabits_per_sec: 200 + +# Throttles all streaming file transfer between the datacenters, +# this setting allows users to throttle inter dc stream throughput in addition +# to throttling all network stream traffic as configured with +# stream_throughput_outbound_megabits_per_sec +# When unset, the default is 200 Mbps or 25 MB/s +# inter_dc_stream_throughput_outbound_megabits_per_sec: 200 + +# How long the coordinator should wait for read operations to complete +read_request_timeout_in_ms: 5000 +# How long the coordinator should wait for seq or index scans to complete +range_request_timeout_in_ms: 10000 +# How long the coordinator should wait for writes to complete +write_request_timeout_in_ms: 2000 +# How long the coordinator should wait for counter writes to complete +counter_write_request_timeout_in_ms: 5000 +# How long a coordinator should continue to retry a CAS operation +# that contends with other proposals for the same row +cas_contention_timeout_in_ms: 1000 +# How long the coordinator should wait for truncates to complete +# (This can be much longer, because unless auto_snapshot is disabled +# we need to flush first so we can snapshot before removing the data.) +truncate_request_timeout_in_ms: 60000 +# The default timeout for other, miscellaneous operations +request_timeout_in_ms: 10000 + +# Enable operation timeout information exchange between nodes to accurately +# measure request timeouts. If disabled, replicas will assume that requests +# were forwarded to them instantly by the coordinator, which means that +# under overload conditions we will waste that much extra time processing +# already-timed-out requests. +# +# Warning: before enabling this property make sure to ntp is installed +# and the times are synchronized between the nodes. +cross_node_timeout: false + +# Set socket timeout for streaming operation. +# The stream session is failed if no data/ack is received by any of the participants +# within that period, which means this should also be sufficient to stream a large +# sstable or rebuild table indexes. +# Default value is 86400000ms, which means stale streams timeout after 24 hours. +# A value of zero means stream sockets should never time out. +# streaming_socket_timeout_in_ms: 86400000 + +# phi value that must be reached for a host to be marked down. +# most users should never need to adjust this. +# phi_convict_threshold: 8 +phi_convict_threshold: <%= node['cassandra']['phi_convict_threshold'] %> + +# endpoint_snitch -- Set this to a class that implements +# IEndpointSnitch. The snitch has two functions: +# - it teaches Cassandra enough about your network topology to route +# requests efficiently +# - it allows Cassandra to spread replicas around your cluster to avoid +# correlated failures. It does this by grouping machines into +# "datacenters" and "racks." Cassandra will do its best not to have +# more than one replica on the same "rack" (which may not actually +# be a physical location) +# +# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH +# ONCE DATA IS INSERTED INTO THE CLUSTER. This would cause data loss. +# This means that if you start with the default SimpleSnitch, which +# locates every node on "rack1" in "datacenter1", your only options +# if you need to add another datacenter are GossipingPropertyFileSnitch +# (and the older PFS). From there, if you want to migrate to an +# incompatible snitch like Ec2Snitch you can do it by adding new nodes +# under Ec2Snitch (which will locate them in a new "datacenter") and +# decommissioning the old ones. +# +# Out of the box, Cassandra provides +# - SimpleSnitch: +# Treats Strategy order as proximity. This can improve cache +# locality when disabling read repair. Only appropriate for +# single-datacenter deployments. +# - GossipingPropertyFileSnitch +# This should be your go-to snitch for production use. The rack +# and datacenter for the local node are defined in +# cassandra-rackdc.properties and propagated to other nodes via +# gossip. If cassandra-topology.properties exists, it is used as a +# fallback, allowing migration from the PropertyFileSnitch. +# - PropertyFileSnitch: +# Proximity is determined by rack and data center, which are +# explicitly configured in cassandra-topology.properties. +# - Ec2Snitch: +# Appropriate for EC2 deployments in a single Region. Loads Region +# and Availability Zone information from the EC2 API. The Region is +# treated as the datacenter, and the Availability Zone as the rack. +# Only private IPs are used, so this will not work across multiple +# Regions. +# - Ec2MultiRegionSnitch: +# Uses public IPs as broadcast_address to allow cross-region +# connectivity. (Thus, you should set seed addresses to the public +# IP as well.) You will need to open the storage_port or +# ssl_storage_port on the public IP firewall. (For intra-Region +# traffic, Cassandra will switch to the private IP after +# establishing a connection.) +# - RackInferringSnitch: +# Proximity is determined by rack and data center, which are +# assumed to correspond to the 3rd and 2nd octet of each node's IP +# address, respectively. Unless this happens to match your +# deployment conventions, this is best used as an example of +# writing a custom Snitch class and is provided in that spirit. +# +# You can use a custom Snitch by setting this to the full class name +# of the snitch, which will be assumed to be on your classpath. +endpoint_snitch: GossipingPropertyFileSnitch + +# controls how often to perform the more expensive part of host score +# calculation +dynamic_snitch_update_interval_in_ms: 100 +# controls how often to reset all host scores, allowing a bad host to +# possibly recover +dynamic_snitch_reset_interval_in_ms: 600000 +# if set greater than zero and read_repair_chance is < 1.0, this will allow +# 'pinning' of replicas to hosts in order to increase cache capacity. +# The badness threshold will control how much worse the pinned host has to be +# before the dynamic snitch will prefer other replicas over it. This is +# expressed as a double which represents a percentage. Thus, a value of +# 0.2 means Cassandra would continue to prefer the static snitch values +# until the pinned host was 20% worse than the fastest. +dynamic_snitch_badness_threshold: 0.1 + +# request_scheduler -- Set this to a class that implements +# RequestScheduler, which will schedule incoming client requests +# according to the specific policy. This is useful for multi-tenancy +# with a single Cassandra cluster. +# NOTE: This is specifically for requests from the client and does +# not affect inter node communication. +# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place +# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of +# client requests to a node with a separate queue for each +# request_scheduler_id. The scheduler is further customized by +# request_scheduler_options as described below. +request_scheduler: org.apache.cassandra.scheduler.NoScheduler + +# Scheduler Options vary based on the type of scheduler +# NoScheduler - Has no options +# RoundRobin +# - throttle_limit -- The throttle_limit is the number of in-flight +# requests per client. Requests beyond +# that limit are queued up until +# running requests can complete. +# The value of 80 here is twice the number of +# concurrent_reads + concurrent_writes. +# - default_weight -- default_weight is optional and allows for +# overriding the default which is 1. +# - weights -- Weights are optional and will default to 1 or the +# overridden default_weight. The weight translates into how +# many requests are handled during each turn of the +# RoundRobin, based on the scheduler id. +# +# request_scheduler_options: +# throttle_limit: 80 +# default_weight: 5 +# weights: +# Keyspace1: 1 +# Keyspace2: 5 + +# request_scheduler_id -- An identifier based on which to perform +# the request scheduling. Currently the only valid option is keyspace. +# request_scheduler_id: keyspace + +# Enable or disable inter-node encryption +# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that +# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher +# suite for authentication, key exchange and encryption of the actual data transfers. +# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode. +# NOTE: No custom encryption options are enabled at the moment +# The available internode options are : all, none, dc, rack +# +# If set to dc cassandra will encrypt the traffic between the DCs +# If set to rack cassandra will encrypt the traffic between the racks +# +# The passwords used in these options must match the passwords used when generating +# the keystore and truststore. For instructions on generating these files, see: +# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore +# +server_encryption_options: + internode_encryption: none + keystore: <%= @cassandra_truststore_dir %>/.keystore + keystore_password: Aa123456 + truststore: <%= @cassandra_truststore_dir %>/.truststore + truststore_password: Aa123456 + # More advanced defaults below: + # protocol: TLS + # algorithm: SunX509 + # store_type: JKS + # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] + # require_client_auth: false + +# enable or disable client/server encryption. +client_encryption_options: + enabled: false + keystore: <%= @cassandra_truststore_dir %>/.keystore + keystore_password: Aa123456 + # require_client_auth: false + # Set trustore and truststore_password if require_client_auth is true + # truststore: conf/.truststore + # truststore_password: cassandra + # More advanced defaults below: + # protocol: TLS + # algorithm: SunX509 + # store_type: JKS + # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] + +# internode_compression controls whether traffic between nodes is +# compressed. +# can be: all - all traffic is compressed +# dc - traffic between different datacenters is compressed +# none - nothing is compressed. +internode_compression: all + +# Enable or disable tcp_nodelay for inter-dc communication. +# Disabling it will result in larger (but fewer) network packets being sent, +# reducing overhead from the TCP protocol itself, at the cost of increasing +# latency if you block for cross-datacenter responses. +inter_dc_tcp_nodelay: false + +# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level +# Adjust the threshold based on your application throughput requirement +# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level +# gc_warn_threshold_in_ms: 1000 diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb new file mode 100644 index 0000000000..e33ece4890 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/configuration.yaml.erb @@ -0,0 +1,459 @@ +identificationHeaderFields: + - HTTP_IV_USER + - HTTP_CSP_FIRSTNAME + - HTTP_CSP_LASTNAME + - HTTP_IV_REMOTE_ADDRESS + - HTTP_CSP_WSTYPE + + +# catalog backend hostname +beFqdn: <%= @host_ip %> + +# catalog backend http port +beHttpPort: <%= @catalog_port %> + +# catalog backend http context +beContext: /sdc/rest/config/get + +# catalog backend protocol +beProtocol: http + +# catalog backend ssl port +beSslPort: <%= @ssl_port %> +version: 1.0 +released: 2012-11-30 + +titanCfgFile: /var/lib/jetty/config/catalog-be/titan.properties +titanInMemoryGraph: false +titanLockTimeout: 1800 +# The interval to try and reconnect to titan DB when it is down during ASDC startup: +titanReconnectIntervalInSeconds: 3 + +# The read timeout towards Titan DB when health check is invoked: +titanHealthCheckReadTimeout: 1 + +# The interval to try and reconnect to Elasticsearch when it is down during ASDC startup: + +esReconnectIntervalInSeconds: 3 +uebHealthCheckReconnectIntervalInSeconds: 15 +uebHealthCheckReadTimeout: 4 + +# Protocols +protocols: + - http + - https + +# Users +users: + tom: passwd + bob: passwd + + +cassandraConfig: + cassandraHosts: [<%= @cassandra_ip %>] + localDataCenter: + reconnectTimeout : 30000 + authenticate: true + username: asdc_user + password: Aa1234%^! + ssl: false + truststorePath : /config/.truststore + truststorePassword : Aa123456 + keySpaces: + - { name: dox, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']} + - { name: sdcaudit, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']} + - { name: sdcartifact, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']} + - { name: sdccomponent, replicationStrategy: NetworkTopologyStrategy, replicationInfo: ['<%= @dc1 %>','<%= @rep_factor %>']} + +#Application-specific settings of ES +elasticSearch: + # Mapping of index prefix to time-based frame. For example, if below is configured: + # + # - indexPrefix: auditingevents + # creationPeriod: minute + # + # then ES object of type which is mapped to "auditingevents-*" template, and created on 2015-12-23 13:24:54, will enter "auditingevents-2015-12-23-13-24" index. + # Another object created on 2015-12-23 13:25:54, will enter "auditingevents-2015-12-23-13-25" index. + # If creationPeriod: month, both of the above will enter "auditingevents-2015-12" index. + # + # PLEASE NOTE: the timestamps are created in UTC/GMT timezone! This is needed so that timestamps will be correctly presented in Kibana. + # + # Legal values for creationPeriod - year, month, day, hour, minute, none (meaning no time-based behaviour). + # + # If no creationPeriod is configured for indexPrefix, default behavour is creationPeriod: month. + + indicesTimeFrequency: + - indexPrefix: auditingevents + creationPeriod: month + - indexPrefix: monitoring_events + creationPeriod: month +artifactTypes: + - CHEF + - PUPPET + - SHELL + - YANG + - YANG_XML + - HEAT + - BPEL + - DG_XML + - MURANO_PKG + - WORKFLOW + - NETWORK_CALL_FLOW + - TOSCA_TEMPLATE + - TOSCA_CSAR + - AAI_SERVICE_MODEL + - AAI_VF_MODEL + - AAI_VF_MODULE_MODEL + - AAI_VF_INSTANCE_MODEL + - OTHER + + +licenseTypes: + - User + - Installation + - CPU + +#Deployment artifacts placeHolder +resourceTypes: &allResourceTypes + - VFC + - CP + - VL + - VF + +# validForResourceTypes usage +# validForResourceTypes: +# - VF +# - VL +deploymentResourceArtifacts: + + +deploymentResourceInstanceArtifacts: + heatEnv: + displayName: "HEAT ENV" + type: HEAT_ENV + description: "Auto-generated HEAT Environment deployment artifact" + fileExtension: "env" + +#tosca artifacts placeholders +toscaArtifacts: + assetToscaTemplate: + artifactName: -template.yml + displayName: Tosca Template + type: TOSCA_TEMPLATE + description: TOSCA representation of the asset + assetToscaCsar: + artifactName: -csar.csar + displayName: Tosca Model + type: TOSCA_CSAR + description: TOSCA definition package of the asset + +#Informational artifacts placeHolder +excludeResourceCategory: + - Generic +informationalResourceArtifacts: + features: + displayName: Features + type: OTHER + capacity: + displayName: Capacity + type: OTHER + vendorTestResult: + displayName: Vendor Test Result + type: OTHER + testScripts: + displayName: Test Scripts + type: OTHER + cloudQuestionnaire: + displayName: Cloud Questionnaire (completed) + type: OTHER + HEATTemplateFromVendor: + displayName: HEAT Template from Vendor + type: HEAT + resourceSecurityTemplate: + displayName: Resource Security Template + type: OTHER + +excludeServiceCategory: + +informationalServiceArtifacts: + serviceArtifactPlan: + displayName: Service Artifact Plan + type: OTHER + summaryOfImpactsToECOMPElements: + displayName: Summary of impacts to ECOMP elements,OSSs, BSSs + type: OTHER + controlLoopFunctions: + displayName: Control Loop Functions + type: OTHER + dimensioningInfo: + displayName: Dimensioning Info + type: OTHER + affinityRules: + displayName: Affinity Rules + type: OTHER + operationalPolicies: + displayName: Operational Policies + type: OTHER + serviceSpecificPolicies: + displayName: Service-specific Policies + type: OTHER + engineeringRules: + displayName: Engineering Rules (ERD) + type: OTHER + distributionInstructions: + displayName: Distribution Instructions + type: OTHER + certificationTestResults: + displayName: TD Certification Test Results + type: OTHER + deploymentVotingRecord: + displayName: Deployment Voting Record + type: OTHER + serviceQuestionnaire: + displayName: Service Questionnaire + type: OTHER + serviceSecurityTemplate: + displayName: Service Security Template + type: OTHER + +serviceApiArtifacts: + configuration: + displayName: Configuration + type: OTHER + instantiation: + displayName: Instantiation + type: OTHER + monitoring: + displayName: Monitoring + type: OTHER + reporting: + displayName: Reporting + type: OTHER + logging: + displayName: Logging + type: OTHER + testing: + displayName: Testing + type: OTHER + + +additionalInformationMaxNumberOfKeys: 50 + +systemMonitoring: + enabled: true + isProxy: false + probeIntervalInSeconds: 15 +defaultHeatArtifactTimeoutMinutes: 60 + +serviceDeploymentArtifacts: + YANG_XML: + acceptedTypes: + - xml + VNF_CATALOG: + acceptedTypes: + - xml + MODEL_INVENTORY_PROFILE: + acceptedTypes: + - xml + MODEL_QUERY_SPEC: + acceptedTypes: + - xml + AAI_SERVICE_MODEL: + acceptedTypes: + - xml + AAI_VF_MODULE_MODEL: + acceptedTypes: + - xml + AAI_VF_INSTANCE_MODEL: + acceptedTypes: + - xml + OTHER: + acceptedTypes: + + +resourceDeploymentArtifacts: + HEAT: + acceptedTypes: + - yaml + - yml + validForResourceTypes: *allResourceTypes + HEAT_VOL: + acceptedTypes: + - yaml + - yml + validForResourceTypes: *allResourceTypes + HEAT_NET: + acceptedTypes: + - yaml + - yml + validForResourceTypes: *allResourceTypes + HEAT_NESTED: + acceptedTypes: + - yaml + - yml + validForResourceTypes: *allResourceTypes + HEAT_ARTIFACT: + acceptedTypes: + validForResourceTypes: *allResourceTypes + YANG_XML: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + VNF_CATALOG: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + VF_LICENSE: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + VENDOR_LICENSE: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + MODEL_INVENTORY_PROFILE: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + MODEL_QUERY_SPEC: + acceptedTypes: + - xml + validForResourceTypes: *allResourceTypes + APPC_CONFIG: + acceptedTypes: + validForResourceTypes: + - VF + #DCAE Artifacts + DCAE_TOSCA: + acceptedTypes: + - yml + - yaml + validForResourceTypes: + - VF + DCAE_JSON: + acceptedTypes: + - json + validForResourceTypes: + - VF + DCAE_POLICY: + acceptedTypes: + - emf + validForResourceTypes: + - VF + DCAE_DOC: + acceptedTypes: + validForResourceTypes: + - VF + DCAE_EVENT: + acceptedTypes: + validForResourceTypes: + - VF +#AAI Artifacts + AAI_VF_MODEL: + acceptedTypes: + - xml + validForResourceTypes: + - VF + AAI_VF_MODULE_MODEL: + acceptedTypes: + - xml + validForResourceTypes: + - VF + OTHER: + acceptedTypes: + validForResourceTypes: *allResourceTypes + +resourceInstanceDeploymentArtifacts: + HEAT_ENV: + acceptedTypes: + - env + VF_MODULES_METADATA: + acceptedTypes: + - json +#DCAE_VF Instance Artifacts + DCAE_INVENTORY_TOSCA: + acceptedTypes: + - yml + - yaml + DCAE_INVENTORY_JSON: + acceptedTypes: + - json + DCAE_INVENTORY_POLICY: + acceptedTypes: + - emf + DCAE_INVENTORY_DOC: + acceptedTypes: + DCAE_INVENTORY_BLUEPRINT: + acceptedTypes: + DCAE_INVENTORY_EVENT: + acceptedTypes: +resourceInformationalDeployedArtifacts: + + +requirementsToFulfillBeforeCert: + +capabilitiesToConsumeBeforeCert: + +unLoggedUrls: + - /sdc2/rest/healthCheck + +cleanComponentsConfiguration: + cleanIntervalInMinutes: 1440 + componentsToClean: + - Resource + - Service + +artifactsIndex: resources + +heatEnvArtifactHeader: + "" +heatEnvArtifactFooter: + "" + +onboarding: + protocol: http + host: <%= @host_ip %> + port: <%= @catalog_port %> + downloadCsarUri: "/onboarding-api/v1.0/vendor-software-products/packages" + + +# #GSS IDNS +switchoverDetector: + gBeFqdn: + gFeFqdn: + beVip: 1.2.3.4 + feVip: 1.2.3.4 + beResolveAttempts: 3 + feResolveAttempts: 3 + enabled: false + interval: 60 + changePriorityUser: ecompasdc + changePriorityPassword: ecompasdc123 + publishNetworkUrl: + publishNetworkBody: '{"note":"comment"}' + groups: + beSet: { changePriorityUrl: "", changePriorityBody: '{"name":"","uri":"","no_ad_redirection":false,"v4groups":{"failover_groups":["","","failover_policy":["FAILALL"]},"comment":"","intended_app_proto":"DNS"}'} + feSet: { changePriorityUrl: "", changePriorityBody: '{"name":"","uri":"","no_ad_redirection":false,"v4groups":{"failover_groups":["",""],"failover_policy":["FAILALL"]},"comment":"","intended_app_proto":"DNS"}'} + +applicationL1Cache: + datatypes: + enabled: true + firstRunDelay: 10 + pollIntervalInSec: 60 + +applicationL2Cache: + enabled: true + catalogL1Cache: + enabled: true + resourcesSizeInCache: 300 + servicesSizeInCache: 200 + productsSizeInCache: 100 + queue: + syncIntervalInSecondes: 43200 + waitOnShutDownInMinutes: 10 + numberOfCacheWorkers: 4 + +toscaValidators: + stringMaxLength: 65536 + +disableAudit: false diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb new file mode 100644 index 0000000000..6b972244c2 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_cassandra_user.sh.erb @@ -0,0 +1,57 @@ +#!/bin/bash + +CASSANDRA_USER=asdc_user +CASSANDRA_PASS=Aa1234%^! +CASSANDRA_IP=<%= @cassandra_ip %> + +pass_changed=99 +retry_num=1 +is_up=0 +while [ $is_up -eq 0 -a $retry_num -le 100 ]; do + echo "exit" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP > /dev/null 2>&1 + res1=$? + echo "exit" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP > /dev/null 2>&1 + res2=$? + + if [ $res1 -eq 0 -o $res2 -eq 0 ]; then + echo "`date` --- cqlsh is enabled to connect." + is_up=1 + [ $res1 -eq 0 ] && pass_changed=0 + [ $res2 -eq 0 ] && pass_changed=1 + else + echo "`date` --- cqlsh is NOT enabled to connect yet. sleep 5" + sleep 5 + fi + let "retry_num++" +done + + +echo "pass_changed=[$pass_changed]" +case $pass_changed in + 0) + cassandra_user_exist=`echo "list users;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP |grep -c $CASSANDRA_USER` + if [ $cassandra_user_exist -eq 1 ] ; then + echo "cassandra user $CASSANDRA_USER already exist" + echo "alter user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP + else + echo "Going to create $CASSANDRA_USER" + echo "create user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP + fi + echo "Modify cassandra password" + echo "ALTER USER cassandra WITH PASSWORD '$CASSANDRA_PASS';" | cqlsh -u cassandra -p cassandra $CASSANDRA_IP + ;; + 1) + cassandra_user_exist=`echo "list users;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP |grep -c $CASSANDRA_USER` + if [ $cassandra_user_exist -eq 1 ] ; then + echo "cassandra user $CASSANDRA_USER already exist" + echo "alter user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP + else + echo "Going to create $CASSANDRA_USER" + echo "create user $CASSANDRA_USER with password '$CASSANDRA_PASS' nosuperuser;" | cqlsh -u cassandra -p $CASSANDRA_PASS $CASSANDRA_IP + fi + ;; + *) + echo "pass_changed doen't have value" + ;; +esac + diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb new file mode 100644 index 0000000000..701d320b67 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/create_dox_keyspace.sh.erb @@ -0,0 +1,77 @@ +#!/bin/bash + +CASSANDRA_USER=cassandra +CASSANDRA_PASS=Aa1234%^! +CASSANDRA_IP=<%= @cassandra_ip %> + +REPLICATION_FACTOR=1 +KEYSPACE="CREATE KEYSPACE IF NOT EXISTS dox WITH REPLICATION = { 'class' : 'SimpleStrategy', 'replication_factor' : $REPLICATION_FACTOR };" + +keyspaces=`echo "describe keyspaces" | cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP 2>/dev/null` +if [ "$keyspaces" == "" ] ; then + echo "keyspace is empty, probably connection error. Exit..." + exit 1 +fi + +echo "run create_dox_db.cql" +echo $KEYSPACE > /tmp/create_dox_db.cql +cat <<'EOF' >> /tmp/create_dox_db.cql +USE dox; +CREATE TYPE IF NOT EXISTS version (major int, minor int); +CREATE TYPE IF NOT EXISTS user_candidate_version (version frozen<version>, user text); +CREATE TABLE IF NOT EXISTS version_info (entity_type text, entity_id text, active_version frozen<version>, status text, candidate frozen<user_candidate_version>, viewable_versions set<frozen<version>>, latest_final_version frozen<version>, PRIMARY KEY (entity_type, entity_id)); +CREATE TABLE IF NOT EXISTS version_info_deleted (entity_type text, entity_id text, active_version frozen<version>, status text, candidate frozen<user_candidate_version>, viewable_versions set<frozen<version>>, latest_final_version frozen<version>, PRIMARY KEY (entity_type, entity_id)); +CREATE TABLE IF NOT EXISTS unique_value (type text, value text, PRIMARY KEY ((type, value))); +CREATE TYPE IF NOT EXISTS choice_or_other (result text); +CREATE TYPE IF NOT EXISTS multi_choice_or_other (results set<text>); +CREATE TABLE IF NOT EXISTS vendor_license_model (vlm_id text, version frozen<version>, vendor_name text, description text, icon text, PRIMARY KEY ((vlm_id, version))); +CREATE TABLE IF NOT EXISTS license_agreement (vlm_id text, version frozen<version>, la_id text, name text, description text, lic_term frozen<choice_or_other>, req_const text, fg_ids set<text>, PRIMARY KEY ((vlm_id, version), la_id)); +CREATE TABLE IF NOT EXISTS feature_group (vlm_id text, version frozen<version>, fg_id text, name text, description text, part_num text, ep_ids set<text>, lkg_ids set<text>, ref_la_ids set<text>, PRIMARY KEY ((vlm_id, version), fg_id)); +CREATE TABLE IF NOT EXISTS license_key_group (vlm_id text, version frozen<version>, lkg_id text,name text,description text, type text, operational_scope frozen<multi_choice_or_other>, ref_fg_ids set<text>,version_uuid text,PRIMARY KEY ((vlm_id, version), lkg_id)); +CREATE TABLE IF NOT EXISTS entitlement_pool (vlm_id text, version frozen<version>, ep_id text,name text,description text,threshold float,threshold_unit text,entitlement_metric frozen<choice_or_other>,increments text,aggregation_func frozen<choice_or_other>, operational_scope frozen<multi_choice_or_other>, time frozen<choice_or_other>,manufacturer_ref_num text,ref_fg_ids set<text>,version_uuid text,PRIMARY KEY ((vlm_id, version), ep_id)); +CREATE TABLE IF NOT EXISTS vsp_information (VSP_ID text, version frozen<version>,NAME text,DESCRIPTION text,CATEGORY text,SUB_CATEGORY text,ICON text,PACKAGE_NAME text,PACKAGE_VERSION text,vendor_name text, vendor_id text,LICENSE_AGREEMENT text,FEATURE_GROUPS list<text>,VALIDATION_DATA text,CONTENT_DATA blob, questionnaire_data text, vlm_version frozen<version>, PRIMARY KEY ((VSP_ID, version))); +CREATE TABLE IF NOT EXISTS package_details (VSP_ID text, version frozen<version>,DISPLAY_NAME text,vsp_name text,vsp_description text,VENDOR_NAME text,CATEGORY text,SUB_CATEGORY text,VENDOR_RELEASE text,PACKAGE_CHECKSUM text,PACKAGE_TYPE text,TRANSLATE_CONTENT blob,PRIMARY KEY ((VSP_ID, version))); +CREATE TABLE IF NOT EXISTS vsp_network (vsp_id text, version frozen<version>, network_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), network_id)); +CREATE TABLE IF NOT EXISTS vsp_component (vsp_id text, version frozen<version>, component_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), component_id)); +CREATE TABLE IF NOT EXISTS vsp_component_nic (vsp_id text, version frozen<version>, component_id text, nic_id text, composition_data text, questionnaire_data text, PRIMARY KEY ((vsp_id, version), component_id, nic_id)); +CREATE TABLE IF NOT EXISTS vsp_process (vsp_id text, version frozen<version>, component_id text, process_id text, name text, description text, artifact_name text, artifact blob, PRIMARY KEY ((vsp_id, version), component_id, process_id)); +CREATE TABLE IF NOT EXISTS vsp_service_artifact (vsp_id text, version frozen<version>, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name)); +CREATE TABLE IF NOT EXISTS vsp_service_template (vsp_id text, version frozen<version>, base_name text static, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name)); +CREATE TABLE IF NOT EXISTS vsp_enriched_service_template (vsp_id text, version frozen<version>, base_name text static, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name)); +CREATE TABLE IF NOT EXISTS vsp_enriched_service_artifact (vsp_id text, version frozen<version>, name text, content_data blob, PRIMARY KEY ((vsp_id, version), name)); +CREATE TABLE IF NOT EXISTS application_config (namespace text, key text, value text, PRIMARY KEY (namespace, key)); +CREATE TABLE IF NOT EXISTS dox.Action (actionUUID text, actionInvariantUUID text, version frozen<version>, status text, name text, vendor_list set<text>, category_list set<text>, timestamp timestamp, user text, supportedModels set<text>, supportedComponents set<text>, data text, PRIMARY KEY ((actionInvariantUUID, version))); +CREATE INDEX IF NOT EXISTS action_supportedComponents ON dox.Action (supportedComponents); +CREATE INDEX IF NOT EXISTS action_category_list ON dox.Action (category_list); +CREATE INDEX IF NOT EXISTS action_supportedModels ON dox.Action (supportedModels); +CREATE INDEX IF NOT EXISTS action_vendor_list ON dox.Action (vendor_list); +CREATE INDEX IF NOT EXISTS action_actionUUID ON dox.Action (actionUUID); +CREATE TABLE IF NOT EXISTS dox.ecompcomponent(id text PRIMARY KEY, name text); +CREATE TABLE IF NOT EXISTS vsp_component_artifact (vsp_id text, version frozen<version>, component_id text, artifact_type text, artifact_id text, name text, description text, artifact blob, PRIMARY KEY ((vsp_id, version), component_id, artifact_type, artifact_id)); +CREATE INDEX IF NOT EXISTS action_name ON dox.Action (name); +CREATE TABLE IF NOT EXISTS action_artifact(artifactuuid text, effective_version int, artifact blob, PRIMARY KEY(artifactuuid, effective_version)) WITH CLUSTERING ORDER BY (effective_version DESC); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.component', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${component.name}" ], "default": "${component.name}"</#if> }, "displayName": { "type": "string"<#if !manual && component.displayName??>, "enum": [ "${component.displayName}" ], "default": "${component.displayName}"</#if> }, "description": { "type": "string" } }, "additionalProperties": false, "required": [ "name"<#if !manual && component.displayName??>, "displayName"</#if> ] }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.network', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${network.name}" ], "default": "${network.name}"</#if> }, "dhcp": { "type": "boolean"<#if !manual>, "enum": [ ${network.dhcp?c} ], "default": ${network.dhcp?c}</#if> } }, "additionalProperties": false, "required": [ "name", "dhcp" ] }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'composition.nic', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "name": { "type": "string"<#if !manual>, "enum": [ "${nic.name}" ], "default": "${nic.name}" </#if> }, "description": { "type": "string" }<#if !manual><#if nic.networkId??>, "networkId": { "type": "string", "enum": [ "${nic.networkId}" ], "default": "${nic.networkId}" } </#if><#else>, "networkId": { "type": "string", "enum": [<#list networkIds as networkId> "${networkId}"<#sep>,</#list> ] } </#if> }, "additionalProperties": false, "required": [ "name" ] }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.component', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "general": { "type": "object", "properties": { "hypervisor": { "type": "object", "properties": { "hypervisor": { "type": "string", "enum": [ "KVM", "VMWare ESXi" ], "default": "KVM" }, "drivers": { "type": "string", "maxLength": 300, "pattern": "^[A-Za-z0-9_,-]*$" }, "containerFeaturesDescription": { "type": "string", "maxLength": 1000, "pattern": "^[A-Za-z0-9_, -]*$" } }, "additionalProperties": false }, "image": { "type": "object", "properties": { "format": { "type": "string", "enum": [ "aki", "ami", "ari", "iso", "qcow2", "raw", "vdi", "vhd", "vmdk" ], "default": "qcow2" }, "providedBy": { "type": "string", "enum": [ "OPENECOMP", "Vendor" ], "default": "OPENECOMP" }, "bootDiskSizePerVM": { "type": "number", "maximum": 100 }, "ephemeralDiskSizePerVM": { "type": "number", "maximum": 400 } }, "additionalProperties": false }, "recovery": { "type": "object", "properties": { "pointObjective": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 15, "exclusiveMaximum ": true }, "timeObjective": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 300, "exclusiveMaximum ": true }, "vmProcessFailuresHandling": { "type": "string" } }, "additionalProperties": false }, "dnsConfiguration": { "type": "string" }, "vmCloneUsage": { "type": "string", "maximum": 300 } }, "additionalProperties": false }, "compute": { "type": "object", "properties": { "vmSizing": { "type": "object", "properties": { "numOfCPUs": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 16, "default": 2 }, "fileSystemSizeGB": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "default": 5 }, "persistentStorageVolumeSize": { "type": "number", "minimum": 0, "exclusiveMinimum": true }, "IOOperationsPerSec": { "type": "number", "minimum": 0, "exclusiveMinimum": true } }, "additionalProperties": false }, "numOfVMs": { "type": "object", "properties": { "minimum": { "type": "number", "minimum": 0, "exclusiveMinimum": true, "maximum": 100 }, "maximum": { "type": "number", "minimum": <#if (componentQuestionnaireData.compute.numOfVMs.minimum)?? && (componentQuestionnaireData.compute.numOfVMs.minimum)?is_number && ((componentQuestionnaireData.compute.numOfVMs.minimum) > 0 && (componentQuestionnaireData.compute.numOfVMs.minimum) <= 100)> ${componentQuestionnaireData.compute.numOfVMs.minimum}<#else> 0</#if>, "exclusiveMinimum": true, "maximum": 100 }, "CpuOverSubscriptionRatio": { "type": "string", "enum": [ "1:1", "4:1", "16:1" ], "default": "4:1" }, "MemoryRAM": { "type": "string", "enum": [ "2 GB", "4 GB", "8 GB" ], "default": "2 GB" } }, "additionalProperties": false }, "guestOS": { "type": "object", "properties": { "name": { "type": "string", "maxLength": 50 }, "bitSize": { "type": "number", "enum": [ 64, 32 ], "default": 64 }, "tools": { "type": "string" } }, "additionalProperties": false } }, "additionalProperties": false }, "highAvailabilityAndLoadBalancing": { "type": "object", "properties": { "failureLoadDistribution": { "type": "string", "maxLength": 1000 }, "nkModelImplementation": { "type": "string", "maxLength": 1000 }, "architectureChoice": { "type": "string", "maxLength": 1000 }, "slaRequirements": { "type": "string", "maxLength": 1000 }, "horizontalScaling": { "type": "string", "maxLength": 1000 }, "loadDistributionMechanism": { "type": "string", "maxLength": 1000 } }, "additionalProperties": false }, "network": { "type": "object", "properties": { "networkCapacity": { "type": "object", "properties": { "protocolWithHighestTrafficProfileAcrossAllNICs": { "type": "string", "enum": [ "TCP", "UDP", "SCTP", "IPsec" ] }, "networkTransactionsPerSecond": { "type": "number" } }, "additionalProperties": false } }, "additionalProperties": false }, "storage": { "type": "object", "properties": { "backup": { "type": "object", "properties": { "backupType": { "type": "string", "enum": [ "On Site", "Off Site" ], "default": "On Site" }, "backupStorageSize": { "type": "number" }, "backupSolution": { "type": "string" }, "backupNIC": { "type": "string", "enum": [<#if nicNames??><#list nicNames as nicName> "${nicName}"<#sep>,</#list></#if> ] } }, "additionalProperties": false }, "snapshotBackup": { "type": "object", "properties": { "snapshotFrequency": { "type": "number", "default": 24, "minimum": 1, "exclusiveMinimum": true } }, "additionalProperties": false }, "logBackup": { "type": "object", "properties": { "sizeOfLogFiles": { "type": "number", "maximum": 5, "exclusiveMaximum": true }, "logBackupFrequency": { "type": "number", "maximum": 4, "exclusiveMaximum": true }, "logRetentionPeriod": { "type": "number", "maximum": 15, "exclusiveMaximum": true }, "logFileLocation": { "type": "string", "maxLength": 300 } }, "additionalProperties": false } }, "additionalProperties": false } }, "additionalProperties": false }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.nic', '{ "$schema": "http://json-schema.org/draft-04/schema#", "definitions": { "protocol": { "type": "string", "enum": [ "TCP", "UDP", "SCTP", "IPsec" ] } }, "type": "object", "properties": { "protocols": { "type": "object", "properties": { "protocols": { "type": "array", "items": { "$ref": "#/definitions/protocol" }, "minItems": 1 }, "protocolWithHighestTrafficProfile": { "$ref": "#/definitions/protocol" } }, "additionalProperties": false }, "ipConfiguration": { "type": "object", "properties": { "ipv4Required": { "type": "boolean", "default": true }, "ipv6Required": { "type": "boolean", "default": false } }, "additionalProperties": false }, "network": { "type": "object", "properties": { "networkDescription": { "type": "string", "pattern": "[A-Za-z]+", "maxLength": 300 } }, "additionalProperties": false }, "sizing": { "type": "object", "definitions": { "peakAndAvg": { "type": "object", "properties": { "peak": { "type": "number" }, "avg": { "type": "number" } }, "additionalProperties": false }, "packetsAndBytes": { "type": "object", "properties": { "packets": { "$ref": "#/properties/sizing/definitions/peakAndAvg" }, "bytes": { "$ref": "#/properties/sizing/definitions/peakAndAvg" } }, "additionalProperties": false } }, "properties": { "describeQualityOfService": { "type": "string" }, "inflowTrafficPerSecond": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "outflowTrafficPerSecond": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "flowLength": { "$ref": "#/properties/sizing/definitions/packetsAndBytes" }, "acceptableJitter": { "type": "object", "properties": { "mean": { "type": "number" }, "max": { "type": "number" }, "variable": { "type": "number" } }, "additionalProperties": false }, "acceptablePacketLoss": { "type": "number", "minimum": 0, "maximum": 100 } }, "additionalProperties": false } }, "additionalProperties": false }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.schemaTemplates', 'questionnaire.vsp', '{ "$schema": "http://json-schema.org/draft-04/schema#", "type": "object", "properties": { "general": { "type": "object", "properties": { "affinityData": { "type": "string", "enum": [ "Affinity", "Anti Affinity", "None" ] }, "availability": { "type": "object", "properties": { "useAvailabilityZonesForHighAvailability": { "type": "boolean", "default": false } }, "additionalProperties": false }, "regionsData": { "type": "object", "properties": { "multiRegion": { "type": "boolean", "default": false }, "regions": { "type": "array", "items": { "type": "string", "enum": [ "Alphareta", "Birmingham", "Dallas", "Fairfield CA", "Hayward CA", "Lisle", "Mission", "San Diego", "Secaucus" ] } } }, "additionalProperties": false }, "storageDataReplication": { "type": "object", "properties": { "storageReplicationAcrossRegion": { "type": "boolean", "default": false }, "storageReplicationSize": { "type": "number", "maximum": 100, "exclusiveMaximum": true }, "storageReplicationFrequency": { "type": "number", "minimum": 5 }, "storageReplicationSource": { "type": "string", "maxLength": 300 }, "storageReplicationDestination": { "type": "string", "maxLength": 300 } }, "additionalProperties": false } }, "additionalProperties": false } }, "additionalProperties": false }'); +INSERT INTO application_config (namespace,key,value) VALUES ('vsp.monitoring', 'component.ceilometer', '{ "ceilometerInfoList": [ { "name": "instance", "type": "Gauge", "unit": "instance", "category": "compute", "description": "Existence of instance" }, { "name": "instance:type", "type": "Gauge", "unit": "instance", "category": "compute", "description": "Existence of instance <type> (OpenStack types)" }, { "name": "memory", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM allocated to the instance" }, { "name": "memory.usage", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM used by the instance from the amount of its allocated memory" }, { "name": "memory.resident", "type": "Gauge", "unit": "MB", "category": "compute", "description": "Volume of RAM used by the instance on the physical machine" }, { "name": "cpu", "type": "Cumulative", "unit": "ns", "category": "compute", "description": "CPU time used" }, { "name": "cpu_util", "type": "Gauge", "unit": "%", "category": "compute", "description": "Average CPU utilization" }, { "name": "cpu.delta", "type": "Delta", "unit": "ns", "category": "compute", "description": "CPU time used since previous datapoint" }, { "name": "vcpus", "type": "Gauge", "unit": "ms", "category": "compute", "description": "Average disk latency" } ] }'); +ALTER TABLE vsp_information ADD questionnaire_data text; +ALTER TABLE vsp_information ADD vlm_version frozen<version>; +ALTER TABLE entitlement_pool ADD version_uuid text; +ALTER TABLE license_key_group ADD version_uuid text; + +EOF + +chmod 777 /tmp/create_dox_db.cql +cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP -f /tmp/create_dox_db.cql > /dev/null 2>&1 + +res=`echo "select keyspace_name from system.schema_keyspaces ;" | cqlsh -u $CASSANDRA_USER -p $CASSANDRA_PASS $CASSANDRA_IP |grep -c dox 2>/dev/null` + +if [ $res -eq 1 ]; then + echo "`date` --- dox keyspace was created " +else + echo "`date` --- Failed to create dox keyspace" +fi + diff --git a/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb new file mode 100644 index 0000000000..79d11f4610 --- /dev/null +++ b/sdc-os-chef/sdc-cassandra/chef-repo/cookbooks/cassandra-actions/templates/default/elasticsearch.yml.erb @@ -0,0 +1,11 @@ +discovery.zen.ping.multicast.enabled: false +discovery.zen.ping.unicast.enabled: true +node.name: asdc-01 +cluster.name: elasticsearch +node.master: false +node.data: false +http.cors.enabled: true +path.home: "/var/lib/jetty/config" +elasticSearch.transportclient: true +transport.client.initial_nodes: + - <%= @elastic_ip %>:9300 |