diff options
Diffstat (limited to 'openecomp-be/lib/openecomp-sdc-translator-lib/openecomp-sdc-translator-core/src/test/resources/mock/heat/nested/nestedwithoutNodeTemplates/inputs/module_1_perimeta_ssc_a.env')
-rw-r--r-- | openecomp-be/lib/openecomp-sdc-translator-lib/openecomp-sdc-translator-core/src/test/resources/mock/heat/nested/nestedwithoutNodeTemplates/inputs/module_1_perimeta_ssc_a.env | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/openecomp-be/lib/openecomp-sdc-translator-lib/openecomp-sdc-translator-core/src/test/resources/mock/heat/nested/nestedwithoutNodeTemplates/inputs/module_1_perimeta_ssc_a.env b/openecomp-be/lib/openecomp-sdc-translator-lib/openecomp-sdc-translator-core/src/test/resources/mock/heat/nested/nestedwithoutNodeTemplates/inputs/module_1_perimeta_ssc_a.env new file mode 100644 index 0000000000..9c0153efaa --- /dev/null +++ b/openecomp-be/lib/openecomp-sdc-translator-lib/openecomp-sdc-translator-core/src/test/resources/mock/heat/nested/nestedwithoutNodeTemplates/inputs/module_1_perimeta_ssc_a.env @@ -0,0 +1,208 @@ +# Environment file for instantiating +# - 1 x HA SSC pair - A instance +# +# During initial instantiation, the Perimeta A instance is configured with +# minimal configuration, commissioned as an SSC and started. In addition, it +# will attempt partnering with the B instance when it becomes availble. +# +# During healing, the Perimeta A instance is only configured with sufficient +# configuration to allow partnering from the B instance (which will complete +# the configuration). +# +# This template assumes that a base template stack has previously been +# created so that deployment wide resources such as server-groups have been +# defined. +# + +parameters: + # + # General VNF parameters + # + # Unique VNF name + #vnf_name: tsbc0002 + # ID of VNF + #vnf_id: ibcx0002 + # Unique ID for this VF Module instance + #vf_module_id: ibcx + # Availability zone for A instances. + #availability_zone_0: DPA3_D2_AZ1 + # + # Shared parameters from base template + # + # Internal HA network UUID + #shared_int_ha_net_id: "c8994bb0-9dbd-43e7-a8f9-658c54e35d23" + # Internal HA network IPv4 prefix length + #shared_int_ha_net_prefix_len_v4: 26 + # Keypair UUID + #shared_perimeta_keypair: "atttest_key_pair" + # List of security groups to use for all interfaces + #shared_perimeta_sec_groups: [ "2412dd6a-d784-40a5-a195-7a7da2349178" ] + # Anti-affinity server groups to use for SSCs + #shared_perimeta_ssc_server_group: "308e8e5b-fac5-4964-b86c-47d8b439fe44" + # Unused network parameters + #shared_ssc_unused_net_id: "dd410626-5658-445c-8f97-1142e2d521ab" + + # + # SSC parameters + # + # Flavor to use for creating SSC VM instance + ssc_flavor_name: gv.c8r16d160 + # Glance image to use for launching SSC Perimeta instances. + ssc_image_name: ISBC_SBC_v4.0.40_SU12.qcow2 + + + # VNFC of the SSC VIP + #ssc_vnfcname_0: ibcx0002vm001ssc001pair + # VNFCs of the servers + #ssc_a_vnfcname_0: ibcx0002vm001ssc001 + #ssc_b_vnfcname_0: ibcx0002vm002ssc001 + + # Name of VM A of SSC + #ssc_a_name_0: ibcx0002vm001 + + # + # HA network parameters + # + # HA fixed IPv4 address to use for SSC A. + #ssc_a_int_ha_ip_0: 172.26.1.4 + # HA fixed IPv4 address to use for SSC B. + #ssc_b_int_ha_ip_0: 172.26.1.5 + + # + # Management network parameters + # + # Management network ID + #mgmt_net_id: 4b5621b0-4ca4-4ea0-8511-860318c4fc3b + # Management network prefix length + #mgmt_net_plen: 26 + # Default gateway for management network + #mgmt_net_default_gateway: 135.144.188.131 + # Management virtual IPv4 address to use for SSC. + #ssc_mgmt_vip_0: 135.144.188.133 + # Management fixed IPv4 address to use for SSC A. + #ssc_a_mgmt_ip_0: 135.144.188.132 + # Management fixed IPv4 address to use for SSC B. + #ssc_b_mgmt_ip_0: 135.144.188.136 + + # + # Trusted/core network parameters + # + # Network ID of Trusted/core network. + #trusted_net_id: 3d584971-4ec6-408c-92fe-3073666fbcb9 + # Virtual IPv4 address on Trusted/core network for SSC. + #ssc_trusted_vip_0: 10.1.1.5 + # Fixed IPv4 address on Trusted/core network for SSC A. + #ssc_a_trusted_ip_0: 10.1.1.4 + + # + # Untrusted/access network parameters + # + # Using VLANs on Untrusted/access + #shared_int_untrusted_parent_net_id: a0ddd409-f6a7-465a-a091-827a12402252 + # Virtual IPv4 address on Untrusted/access parent network for SSC. + #ssc_untrusted_parent_vip_0: 11.0.0.6 + # Fixed IPv4 address on Untrusted/access parent network for SSC A. + #ssc_a_untrusted_parent_ip_0: 11.0.0.4 + + #perimeta_untrusted_num_vlans: 5 + #perimeta_untrusted_vlan_ids: ["81", "1001", "1002", "1003", "1004"] + #perimeta_untrusted_vlan_networks: [95c74fbb-0650-4ac2-bd4f-7b4fb50b4b5d,aa1a5096-61fd-421b-a74b-0b4a72c47856,ced72584-9c09-4d67-9b9f-8faf4c081c45,6311c9db-c4ba-41f5-85e5-4a3cc85d7f55,79391429-9c52-44f5-b9a9-4547fec0e9d4] + + + + # Virtual IPv4 address on Untrusted/access network for SSC. + #ssc_untrusted_vip_0: 12.121.106.133 + # Virtual IPv6 address on Untrusted/access network for SSC. + #ssc_untrusted_v6_vip_0: 2001:1890:1001:2B38::2D:2 + # Fixed IPv4 address on Untrusted/access network for SSC A. + #ssc_a_untrusted_ip_0: 12.121.106.132 + # Fixed IPv6 address on Untrusted/access network for SSC A. + #ssc_a_untrusted_v6_ip_0: 2001:1890:1001:2B38::2D:1 + + # + # management/Rf network parameters + # + # Virtual IPv4 address on management/Rf network for SSC. + #ssc_rf_vip_0: 135.144.188.135 + # Fixed IPv4 address on management/Rf network for SSC A. + #ssc_a_rf_ip_0: 135.144.188.134 + + # + # A side healing / instantiation parameters + # + # + # Healing or instantiation? This is used to ensure that the json file passed + # to the VF is correct for the operation being carried out. + # This parameter must be set to one of the following values + # - single whitespace character + # - the string // not required for healing + # Simply uncomment the required value from the pair below + # + # Note that we need to do this because we cannot parmeterize the file name + # passed to get_file (which would be the more obvious way to do this) + # + # Uncomment for instantiation, comment for healing + ssc_a_json_prefix: " " + # Uncomment for healing, comment for instantiation + # ssc_a_json_prefix: "// healing, not required " + + # Orchestrating a perimeta version 41 or above. Used to ensure that the + # tags in the json file are supported by the version of perimeta that is + # being instantiated. + # This parameter must be set to one of the following values + # - single whitespace character + # - the string // older perimeta, parameter not required + # Simply uncomment the required value from the pair below + # + # Note that we need to do this because we cannot parmeterize the file name + # passed to get_file (which would be the more obvious way to do this) + # + # + # Uncomment for V4.1.00 or above, comment for V4.0.40 + ssc_json_v41: " " + # Uncomment for V4.0.40, comment for V4.1.00 or above + # ssc_json_v41: "// older perimeta, parameter not required " + + # Using Radius for user account authentication? Used to ensure that the json + # file is configured correctly depending on whether we are using Radius or + # local authentication + # + # This parameter must be set to one of the following values + # - single whitespace character + # - the string // older perimeta, parameter not required + # Simply uncomment the required value from the pair below + # + # Note that we need to do this because we cannot parmeterize the file name + # passed to get_file (which would be the more obvious way to do this) + # + # Uncomment for Local authentication + #ssc_json_use_radius_authentication: "// not using Radius " + # Uncomment for Radius authentication + ## ssc_json_use_radius_authentication: " " + + # + # Radius server parameters + # + # + # IP Address or hostname of RADIUS Server. + # Value is ignored if RADIUS is not being used but it still must be set + #ssc_json_radius_servername: "192.0.0.1" + # Radius Server port configuration - value between 0 and 65535 + # Normal Radius Server port is 1812 + # Value is ignored if RADIUS is not being used but it still must be set + #ssc_json_radius_port: 1812 + # Radius Server shared secret + # Value is ignored if RADIUS is not being used but it still must be set + #ssc_json_radius_secret: "TopSecret" + # Radius Server connection timeout - value between 1 and 60 + # Value is ignored if RADIUS is not being used but it still must be set + #ssc_json_radius_timeout: 3 + # Radius Server default user authentication level. + # must be set to one of 'no-access', 'read-only', 'support', 'restricted-admin' or 'admin' + # Value is ignored if RADIUS is not being used but it still must be set + #ssc_json_radius_default: "no-access" + + # + # NTP server IPv4 addresses, separated by commas. These must be accessible from the management network + # + #ntp_server_ip_addrs: 132.201.84.13,155.179.58.11,155.179.59.249,155.179.82.25 |