diff options
Diffstat (limited to 'catalog-be/src/test/resources/elasticsearch.yml')
| -rw-r--r-- | catalog-be/src/test/resources/elasticsearch.yml | 391 |
1 files changed, 0 insertions, 391 deletions
diff --git a/catalog-be/src/test/resources/elasticsearch.yml b/catalog-be/src/test/resources/elasticsearch.yml deleted file mode 100644 index eba942dc31..0000000000 --- a/catalog-be/src/test/resources/elasticsearch.yml +++ /dev/null @@ -1,391 +0,0 @@ - -elasticSearch.local: true -elasticSearch.transportclient: false -cluster.name: elasticsearch_1_5_2222 - -discovery.zen.ping.multicast.enabled: false -discovery.zen.ping.unicast.enabled: true -discovery.zen.ping.unicast.hosts: 1.2.3.4 -transport.client.initial_nodes: - - 1.2.3.4:9300 - -#plugin.types: "DeleteByQueryPlugin" - -##################### Elasticsearch Configuration Example ##################### - -# This file contains an overview of various configuration settings, -# targeted at operations staff. Application developers should -# consult the guide at <http://elasticsearch.org/guide>. -# -# The installation procedure is covered at -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>. -# -# Elasticsearch comes with reasonable defaults for most settings, -# so you can try it out without bothering with configuration. -# -# Most of the time, these defaults are just fine for running a production -# cluster. If you're fine-tuning your cluster, or wondering about the -# effect of certain configuration option, please _do ask_ on the -# mailing list or IRC channel [http://elasticsearch.org/community]. - -# Any element in the configuration can be replaced with environment variables -# by placing them in ${...} notation. For example: -# -# node.rack: ${RACK_ENV_VAR} - -# For information on supported formats and syntax for the config file, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html> - - -################################### Cluster ################################### - -# Cluster name identifies your cluster for auto-discovery. If you're running -# multiple clusters on the same network, make sure you're using unique names. -# -# cluster.name: elasticsearch - - -#################################### Node ##################################### - -# Node names are generated dynamically on startup, so you're relieved -# from configuring them manually. You can tie this node to a specific name: -# -# node.name: "Franz Kafka" - -# Every node can be configured to allow or deny being eligible as the master, -# and to allow or deny to store the data. -# -# Allow this node to be eligible as a master node (enabled by default): -# -# node.master: true -# -# Allow this node to store data (enabled by default): -# -# node.data: true - -# You can exploit these settings to design advanced cluster topologies. -# -# 1. You want this node to never become a master node, only to hold data. -# This will be the "workhorse" of your cluster. -# -# node.master: false -# node.data: true -# -# 2. You want this node to only serve as a master: to not store any data and -# to have free resources. This will be the "coordinator" of your cluster. -# -# node.master: true -# node.data: false -# -# 3. You want this node to be neither master nor data node, but -# to act as a "search load balancer" (fetching data from nodes, -# aggregating results, etc.) -# -# node.master: false -# node.data: false - -# Use the Cluster Health API [http://localhost:9200/_cluster/health], the -# Node Info API [http://localhost:9200/_nodes] or GUI tools -# such as <http://www.elasticsearch.org/overview/marvel/>, -# <http://github.com/karmi/elasticsearch-paramedic>, -# <http://github.com/lukas-vlcek/bigdesk> and -# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state. - -# A node can have generic attributes associated with it, which can later be used -# for customized shard allocation filtering, or allocation awareness. An attribute -# is a simple key value pair, similar to node.key: value, here is an example: -# -# node.rack: rack314 - -# By default, multiple nodes are allowed to start from the same installation location -# to disable it, set the following: -# node.max_local_storage_nodes: 1 - - -#################################### Index #################################### - -# You can set a number of options (such as shard/replica options, mapping -# or analyzer definitions, translog settings, ...) for indices globally, -# in this file. -# -# Note, that it makes more sense to configure index settings specifically for -# a certain index, either when creating it or by using the index templates API. -# -# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html> -# for more information. - -# Set the number of shards (splits) of an index (5 by default): -# -# index.number_of_shards: 5 - -# Set the number of replicas (additional copies) of an index (1 by default): -# -# index.number_of_replicas: 1 - -# Note, that for development on a local machine, with small indices, it usually -# makes sense to "disable" the distributed features: -# -index.number_of_shards: 1 -index.number_of_replicas: 0 - -# These settings directly affect the performance of index and search operations -# in your cluster. Assuming you have enough machines to hold shards and -# replicas, the rule of thumb is: -# -# 1. Having more *shards* enhances the _indexing_ performance and allows to -# _distribute_ a big index across machines. -# 2. Having more *replicas* enhances the _search_ performance and improves the -# cluster _availability_. -# -# The "number_of_shards" is a one-time setting for an index. -# -# The "number_of_replicas" can be increased or decreased anytime, -# by using the Index Update Settings API. -# -# Elasticsearch takes care about load balancing, relocating, gathering the -# results from nodes, etc. Experiment with different settings to fine-tune -# your setup. - -# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect -# the index status. - - -#################################### Paths #################################### -path.home: /src/test/resources -# Path to directory containing configuration (this file and logging.yml): -# -path.conf: /src/test/resources - -# Path to directory where to store index data allocated for this node. -# -path.data: target/esdata -# -# Can optionally include more than one location, causing data to be striped across -# the locations (a la RAID 0) on a file level, favouring locations with most free -# space on creation. For example: -# -# path.data: /path/to/data1,/path/to/data2 - -# Path to temporary files: -# -path.work: /target/eswork - -# Path to log files: -# -path.logs: /target/eslogs - -# Path to where plugins are installed: -# -# path.plugins: /path/to/plugins - - -#################################### Plugin ################################### - -# If a plugin listed here is not installed for current node, the node will not start. -# -# plugin.mandatory: mapper-attachments,lang-groovy - - -################################### Memory #################################### - -# Elasticsearch performs poorly when JVM starts swapping: you should ensure that -# it _never_ swaps. -# -# Set this property to true to lock the memory: -# -# bootstrap.mlockall: true - -# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set -# to the same value, and that the machine has enough memory to allocate -# for Elasticsearch, leaving enough memory for the operating system itself. -# -# You should also make sure that the Elasticsearch process is allowed to lock -# the memory, eg. by using `ulimit -l unlimited`. - - -############################## Network And HTTP ############################### - -# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens -# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node -# communication. (the range means that if the port is busy, it will automatically -# try the next port). - -# Set the bind address specifically (IPv4 or IPv6): -# -# network.bind_host: 192.168.0.1 - -# Set the address other nodes will use to communicate with this node. If not -# set, it is automatically derived. It must point to an actual IP address. -# -# network.publish_host: 192.168.0.1 - -# Set both 'bind_host' and 'publish_host': -# -# network.host: 192.168.0.1 - -# Set a custom port for the node to node communication (9300 by default): -# -# transport.tcp.port: 9300 - -# Enable compression for all communication between nodes (disabled by default): -# -# transport.tcp.compress: true - -# Set a custom port to listen for HTTP traffic: -# -# http.port: 9200 - -# Set a custom allowed content length: -# -# http.max_content_length: 100mb - -# Disable HTTP completely: -# -# http.enabled: false - - -################################### Gateway ################################### - -# The gateway allows for persisting the cluster state between full cluster -# restarts. Every change to the state (such as adding an index) will be stored -# in the gateway, and when the cluster starts up for the first time, -# it will read its state from the gateway. - -# There are several types of gateway implementations. For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>. - -# The default gateway type is the "local" gateway (recommended): -# -# gateway.type: local - -# Settings below control how and when to start the initial recovery process on -# a full cluster restart (to reuse as much local data as possible when using shared -# gateway). - -# Allow recovery process after N nodes in a cluster are up: -# -gateway.recover_after_nodes: 1 - -# Set the timeout to initiate the recovery process, once the N nodes -# from previous setting are up (accepts time value): -# -# gateway.recover_after_time: 5m - -# Set how many nodes are expected in this cluster. Once these N nodes -# are up (and recover_after_nodes is met), begin recovery process immediately -# (without waiting for recover_after_time to expire): -# -gateway.expected_nodes: 1 - - -############################# Recovery Throttling ############################# - -# These settings allow to control the process of shards allocation between -# nodes during initial recovery, replica allocation, rebalancing, -# or when adding and removing nodes. - -# Set the number of concurrent recoveries happening on a node: -# -# 1. During the initial recovery -# -# cluster.routing.allocation.node_initial_primaries_recoveries: 4 -# -# 2. During adding/removing nodes, rebalancing, etc -# -# cluster.routing.allocation.node_concurrent_recoveries: 2 - -# Set to throttle throughput when recovering (eg. 100mb, by default 20mb): -# -# indices.recovery.max_bytes_per_sec: 20mb - -# Set to limit the number of open concurrent streams when -# recovering a shard from a peer: -# -# indices.recovery.concurrent_streams: 5 - - -################################## Discovery ################################## - -# Discovery infrastructure ensures nodes can be found within a cluster -# and master node is elected. Multicast discovery is the default. - -# Set to ensure a node sees N other master eligible nodes to be considered -# operational within the cluster. Its recommended to set it to a higher value -# than 1 when running more than 2 nodes in the cluster. -# -# discovery.zen.minimum_master_nodes: 1 - -# Set the time to wait for ping responses from other nodes when discovering. -# Set this option to a higher value on a slow or congested network -# to minimize discovery failures: -# -# discovery.zen.ping.timeout: 3s - -# For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html> - -# Unicast discovery allows to explicitly control which nodes will be used -# to discover the cluster. It can be used when multicast is not present, -# or to restrict the cluster communication-wise. -# -# 1. Disable multicast discovery (enabled by default): -# -# discovery.zen.ping.multicast.enabled: false -# -# 2. Configure an initial list of master nodes in the cluster -# to perform discovery when new nodes (master or data) are started: -# -# discovery.zen.ping.unicast.hosts: ["host1", "host2:port"] - -# EC2 discovery allows to use AWS EC2 API in order to perform discovery. -# -# You have to install the cloud-aws plugin for enabling the EC2 discovery. -# -# For more information, see -# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html> -# -# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/> -# for a step-by-step tutorial. - -# GCE discovery allows to use Google Compute Engine API in order to perform discovery. -# -# You have to install the cloud-gce plugin for enabling the GCE discovery. -# -# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>. - -# Azure discovery allows to use Azure API in order to perform discovery. -# -# You have to install the cloud-azure plugin for enabling the Azure discovery. -# -# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>. - -################################## Slow Log ################################## - -# Shard level query and fetch threshold logging. - -#index.search.slowlog.threshold.query.warn: 10s -#index.search.slowlog.threshold.query.info: 5s -#index.search.slowlog.threshold.query.debug: 2s -#index.search.slowlog.threshold.query.trace: 500ms - -#index.search.slowlog.threshold.fetch.warn: 1s -#index.search.slowlog.threshold.fetch.info: 800ms -#index.search.slowlog.threshold.fetch.debug: 500ms -#index.search.slowlog.threshold.fetch.trace: 200ms - -#index.indexing.slowlog.threshold.index.warn: 10s -#index.indexing.slowlog.threshold.index.info: 5s -#index.indexing.slowlog.threshold.index.debug: 2s -#index.indexing.slowlog.threshold.index.trace: 500ms - -################################## GC Logging ################################ - -#monitor.jvm.gc.young.warn: 1000ms -#monitor.jvm.gc.young.info: 700ms -#monitor.jvm.gc.young.debug: 400ms - -#monitor.jvm.gc.old.warn: 10s -#monitor.jvm.gc.old.info: 5s -#monitor.jvm.gc.old.debug: 2s - |