Sync Integ to Master

Change-Id: I71e3acc26fa612127756ac04073a522b9cc6cd74
Issue-ID: SDC-977
Signed-off-by: Gitelman, Tal (tg851x) <tg851x@intl.att.com>

1 files changed, 140 insertions, 80 deletions

diff --git a/sdc-os-chef/scripts/sanity_run.sh b/sdc-os-chef/scripts/sanity_run.sh
index 17d1642c73..4aea3bb410 100644
--- a/sdc-os-chef/scripts/sanity_run.sh
+++ b/sdc-os-chef/scripts/sanity_run.sh
@@ -2,116 +2,176 @@
 
 
 function usage {
-    echo "usage: docker_run.sh [ -r|--release <RELEASE-NAME> ]  [ -e|--environment <ENV-NAME> ] [ -p|--port <Docker-hub-port>] [ -l|--local <Run-without-pull>] [ -s|--skipTests <Run-without-sanityDocker>] [ -h|--help ]"
+    echo "usage: sanity_run.sh [ -r|--release <RELEASE-NAME> ]  [ -e|--environment <ENV-NAME> ] [ -p|--port <Docker-hub-port>] [ -l|--local <Run-without-pull>] [ -t|--runTests <Run-with-sanityDocker>] [ -h|--help ]"
 }
 
-
 function cleanup {
-	echo "performing old dockers cleanup"
-	docker_ids=`docker ps -a | egrep -v "openecomp/sdc-simulator" | egrep "ecomp-nexus:${PORT}/sdc-sanity|sdc-sanity|Exit" | awk '{print $1}'`
-	for X in ${docker_ids}
-	do
-	   docker rm -f ${X}
-	done
+    echo "performing old dockers cleanup"
+    docker_ids=`docker ps -a | egrep -v "onap/sdc-simulator" | egrep "ecomp-nexus:${PORT}/sdc|sdc-sanity|Exit" | awk '{print $1}'`
+    for X in ${docker_ids}
+    do
+        docker rm -f ${X}
+    done
 }
 
 
 function dir_perms {
-	mkdir -p /data/logs/BE/SDC/SDC-BE
-	mkdir -p /data/logs/FE/SDC/SDC-FE
-	chmod -R 777 /data/logs
+    mkdir -p ${WORKSPACE}/data/logs/BE/SDC/SDC-BE
+    mkdir -p ${WORKSPACE}/data/logs/FE/SDC/SDC-FE
+    chmod -R 777 ${WORKSPACE}/data/logs
 }
 
 function monitor_docker {
 
-echo monitor $1 Docker
-sleep 5
-TIME_OUT=900
-INTERVAL=20
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-
-MATCH=`docker logs --tail 30 $1 | grep "DOCKER STARTED"`
-echo MATCH is -- $MATCH
-
-if [ -n "$MATCH" ]
- then
-    echo DOCKER start finished in $TIME seconds
-    break
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if $1 DOCKER is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
+    echo monitor $1 Docker
+    sleep 5
+    TIME_OUT=900
+    INTERVAL=20
+    TIME=0
+    while [ "$TIME" -lt "$TIME_OUT" ]; do
 
-if [ "$TIME" -ge "$TIME_OUT" ]
- then
-   echo -e "\e[1;31mTIME OUT: DOCKER was NOT fully started in $TIME_OUT seconds... Could cause problems ...\e[0m"
-fi
+        MATCH=`docker logs --tail 30 $1 | grep "DOCKER STARTED"`
+        echo MATCH is -- $MATCH
+
+        if [ -n "$MATCH" ]; then
+            echo DOCKER start finished in $TIME seconds
+            break
+        fi
+
+        echo Sleep: $INTERVAL seconds before testing if $1 DOCKER is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+        sleep $INTERVAL
+        TIME=$(($TIME+$INTERVAL))
+    done
+
+    if [ "$TIME" -ge "$TIME_OUT" ]; then
+        echo -e "\e[1;31mTIME OUT: DOCKER was NOT fully started in $TIME_OUT seconds... Could cause problems ...\e[0m"
+    fi
 
+}
+
+function healthCheck {
+	curl localhost:9200/_cluster/health?pretty=true
+
+	echo "BE health-Check:"
+	curl http://localhost:8080/sdc2/rest/healthCheck
+
+	echo ""
+	echo ""
+	echo "FE health-Check:"
+	curl http://localhost:8181/sdc1/rest/healthCheck
 
+
+	echo ""
+	echo ""
+	healthCheck_http_code=$(curl -o /dev/null -w '%{http_code}' -H "Accept: application/json" -H "Content-Type: application/json" -H "USER_ID: jh0003" http://localhost:8080/sdc2/rest/v1/user/demo;)
+	if [[ ${healthCheck_http_code} != 200 ]]
+	then
+		echo "Error [${healthCheck_http_code}] while user existance check"
+		return ${healthCheck_http_code}
+	fi
+	echo "check user existance: OK"
+	return ${healthCheck_http_code}
 }
 
+function elasticHealthCheck {
+	echo "Elastic Health-Check:"
+	
+	COUNTER=0
+    while [  $COUNTER -lt 20 ]; do
+    	echo "Waiting ES docker to start"
+  		health_Check_http_code=$(curl -o /dev/null -w '%{http_code}' http://localhost:9200/_cluster/health?wait_for_status=yellow&timeout=120s)
+  		if [[ "$health_Check_http_code" -eq 200 ]]
+		then
+			break
+		fi
+		let COUNTER=COUNTER+1 
+		sleep 4
+	done
+	
+	healthCheck_http_code=$(curl -o /dev/null -w '%{http_code}' http://localhost:9200/_cluster/health?wait_for_status=yellow&timeout=120s)
+	if [[ "$health_Check_http_code" != 200 ]]
+	then
+		echo "Error [${healthCheck_http_code}] ES NOT started correctly"
+		exit ${healthCheck_http_code}
+	fi
+	echo "ES started correctly"
+	curl localhost:9200/_cluster/health?pretty=true
+	return ${healthCheck_http_code}
+}
 
 RELEASE=latest
 LOCAL=false
-SKIPTESTS=false
+RUNTESTS=true
 DEBUG_PORT="--publish 4000:4000"
 
-[ -f /opt/config/env_name.txt ] && DEP_ENV=$(cat /opt/config/env_name.txt) || DEP_ENV=__ENV-NAME__
-[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)    || NEXUS_USERNAME=release
-[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)      || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW
-[ -f /opt/config/nexus_docker_repo.txt ] && NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt) || NEXUS_DOCKER_REPO=ecomp-nexus:${PORT}
-
-while [ "$1" != "" ]; do
+while [ $# -gt 0 ]; do
     case $1 in
-        -r | --release )
-            shift
-            RELEASE=${1}
-            ;;
-        -e | --environment )
-			shift
-            DEP_ENV=${1}
-            ;;
-		-p | --port )
-            shift
-            PORT=${1}
-			;;
-		-l | --local )
-		shift
-		LOCAL=true
-		;;
-		-s | --skipTests )
-		shift
-		SKIPTESTS=true
-		;;
-        -h | --help )
-			usage
-            exit
-            ;;
-        * )
-    		usage
-            exit 1
+	# -r | --release - The specific docker version to pull and deploy
+    -r | --release )
+          shift 1 ;
+          RELEASE=$1;
+          shift 1;;
+	# -e | --environment - The environment name you want to deploy
+    -e | --environment )
+          shift 1;
+          DEP_ENV=$1;
+          shift 1 ;;
+	# -p | --port - The port from which to connect to the docker nexus
+    -p | --port )
+          shift 1 ;
+          PORT=$1;
+          shift 1 ;;
+	# -l | --local - Use this for deploying your local dockers without pulling them first
+    -l | --local )
+          LOCAL=true;
+          shift 1;;
+	# -t | --runTests - Use this for running the sanity tests docker after all other dockers have been deployed
+    -t | --runTests )
+          RUNTESTS=true;
+          shift 1 ;;
+	# -h | --help - Display the help message with all the available run options
+    -h | --help )
+          usage;
+          exit  0;;
+         * )
+          usage;
+          exit  1;;
     esac
-    shift
 done
 
+
+[ -f /opt/config/env_name.txt ] && DEP_ENV=$(cat /opt/config/env_name.txt) || DEP_ENV=__ENV-NAME__
+[ -f /opt/config/nexus_username.txt ] && NEXUS_USERNAME=$(cat /opt/config/nexus_username.txt)    || NEXUS_USERNAME=release
+[ -f /opt/config/nexus_password.txt ] && NEXUS_PASSWD=$(cat /opt/config/nexus_password.txt)      || NEXUS_PASSWD=sfWU3DFVdBr7GVxB85mTYgAW
+[ -f /opt/config/nexus_docker_repo.txt ] && NEXUS_DOCKER_REPO=$(cat /opt/config/nexus_docker_repo.txt) || NEXUS_DOCKER_REPO=nexus3.onap.org:${PORT}
 [ -f /opt/config/nexus_username.txt ] && docker login -u $NEXUS_USERNAME -p $NEXUS_PASSWD $NEXUS_DOCKER_REPO
 
-export IP=`ifconfig eth0 | awk -F: '/inet addr/ {gsub(/ .*/,"",$2); print $2}'`
-export PREFIX=${NEXUS_DOCKER_REPO}'/openecomp'
+
+cleanup
+
+
+export IP=`ip route get 8.8.8.8 | awk '/src/{ print $7 }'`
+export PREFIX=${NEXUS_DOCKER_REPO}'/onap'
 
 if [ ${LOCAL} = true ]; then
-	PREFIX='openecomp'
+	PREFIX='onap'
 fi
 
-## sanityDocker
-echo "docker run sdc-sanity..."
-if [ ${SKIPTESTS} = false ]; then
-echo "Triger sanity docker, please wait..."
+echo ""
+
+healthCheck
+
+# sanityDocker
+if [[ (${RUNTESTS} = true) && (${healthCheck_http_code} == 200) ]]; then
+    echo "docker run sdc-sanity..."
+    echo "Triger sanity docker, please wait..."
+	
     if [ ${LOCAL} = false ]; then
-	   docker pull ${PREFIX}/sdc-sanity:${RELEASE}
+        docker pull ${PREFIX}/sdc-sanity:${RELEASE}
     fi
-	docker run --detach --name sdc-sanity --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 1g --memory-swap=1g --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume /data/logs/sdc-sanity/target:/var/lib/tests/target --volume /data/logs/sdc-sanity/ExtentReport:/var/lib/tests/ExtentReport --volume /data/logs/sdc-sanity/outputCsar:/var/lib/tests/outputCsar --volume /data/environments:/root/chef-solo/environments --publish 9560:9560 ${PREFIX}/sdc-sanity:${RELEASE}
-fi
\ No newline at end of file
+
+docker run --detach --name sdc-sanity --env HOST_IP=${IP} --env ENVNAME="${DEP_ENV}" --env http_proxy=${http_proxy} --env https_proxy=${https_proxy} --env no_proxy=${no_proxy} --log-driver=json-file --log-opt max-size=100m --log-opt max-file=10 --ulimit memlock=-1:-1 --memory 1500m --ulimit nofile=4096:100000 --volume /etc/localtime:/etc/localtime:ro --volume ${WORKSPACE}/data/logs/sdc-sanity/target:/var/lib/tests/target --volume ${WORKSPACE}/data/logs/sdc-sanity/ExtentReport:/var/lib/tests/ExtentReport --volume ${WORKSPACE}/data/logs/sdc-sanity/outputCsar:/var/lib/tests/outputCsar --volume ${WORKSPACE}/data/environments:/root/chef-solo/environments --publish 9560:9560 ${PREFIX}/sdc-sanity:${RELEASE}
+echo "please wait while SANITY is starting....."
+monitor_docker sdc-sanity
+
+fi