aboutsummaryrefslogtreecommitdiffstats
path: root/docs/development/devtools/drools-s3p.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/development/devtools/drools-s3p.rst')
-rw-r--r--docs/development/devtools/drools-s3p.rst175
1 files changed, 86 insertions, 89 deletions
diff --git a/docs/development/devtools/drools-s3p.rst b/docs/development/devtools/drools-s3p.rst
index 303a6beb..1586379e 100644
--- a/docs/development/devtools/drools-s3p.rst
+++ b/docs/development/devtools/drools-s3p.rst
@@ -10,31 +10,34 @@
Policy Drools PDP component
~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Both the Performance and the Stability tests were executed against a default ONAP installation in the policy-k8s tenant in the windriver lab, from an independent VM running the jmeter tool to inject the load.
+Both the Performance and the Stability tests were executed against an ONAP installation in the policy-k8s tenant
+in the windriver lab, from an independent VM running the jmeter tool to inject the load.
General Setup
*************
-The kubernetes installation allocated all policy components in the same worker node VM and some additional ones.
-The worker VM hosting the policy components has the following spec:
+The installation runs the following components in a single VM:
-- 16GB RAM
-- 8 VCPU
-- 160GB Ephemeral Disk
+- AAF
+- AAI
+- DMAAP
+- POLICY
-The standalone VM designated to run jmeter has the same configuration. The jmeter JVM
-was instantiated with a max heap configuration of 12G.
+The VM has the following hardware spec:
-The drools-pdp container uses the default JVM memory settings from a default OOM installation:
+- 126GB RAM
+- 12 VCPUs
+- 155GB Ephemeral Disk
-.. code-block:: bash
+Jmeter is run from a different VM with the following configuration:
- VM settings:
- Max. Heap Size (Estimated): 989.88M
- Using VM: OpenJDK 64-Bit Server VM
+- 16GB RAM
+- 8 VCPUs
+- 155GB Ephemeral Disk
+The drools-pdp container uses the JVM memory settings from a default OOM installation.
-Other ONAP components used during the stability tests are:
+Other ONAP components exercised during the stability tests were:
- Policy XACML PDP to process guard queries for each transaction.
- DMaaP to carry PDP-D and jmeter initiated traffic to complete transactions.
@@ -48,19 +51,14 @@ The following components are simulated during the tests.
- APPC responses for the vCPE and vFW use cases.
- AAI to answer queries for the use cases under test.
-In order to avoid interferences with the APPC component while running the tests,
-the APPC component was disabled.
-
SO, and AAI actors were simulated within the PDP-D JVM by enabling the
feature-controlloop-utils before running the tests.
PDP-D Setup
***********
-The kubernetes charts were modified previous to the installation with
-the changes below.
-
-The feature-controlloop-utils was started by adding the following script:
+The kubernetes charts were modified previous to the installation
+to add the following script that enables the controlloop-utils feature:
.. code-block:: bash
@@ -75,7 +73,7 @@ Stability Test of Policy PDP-D
PDP-D performance
=================
-The test set focused on the following use cases:
+The tests focused on the following use cases:
- vCPE
- vDNS
@@ -86,23 +84,20 @@ For 72 hours the following 5 scenarios ran in parallel:
- vCPE success scenario
- vCPE failure scenario (failure returned by simulated APPC recipient through DMaaP).
- vDNS success scenario.
-- vDNS failure scenario.
+- vDNS failure scenario (failure by introducing in the DCAE ONSET a non-existant vserver-name reference).
- vFirewall success scenario.
-Five threads ran in parallel, one for each scenario. The transactions were initiated
+Five threads ran in parallel, one for each scenario, back to back with no pauses. The transactions were initiated
by each jmeter thread group. Each thread initiated a transaction, monitored the transaction, and
-as soon as the transaction ending was detected, it initiated the next one, so back to back with no
-pauses.
+as soon as the transaction ending was detected, it initiated the next one.
-All transactions completed successfully as it was expected in each scenario, with no failures.
-
-The command executed was
+JMeter was run in a docker container with the following command:
.. code-block:: bash
- ./jmeter -n -t /home/ubuntu/drools-applications/testsuites/stability/src/main/resources/s3p.jmx -l /home/ubuntu/jmeter_result/jmeter.jtl -e -o /home/ubuntu/jmeter_result > /dev/null 2>&1
+ docker run --interactive --tty --name jmeter --rm --volume $PWD:/jmeter -e VERBOSE_GC="" egaillardon/jmeter-plugins --nongui --testfile s3p.jmx --loglevel WARN
-The results were computed by monitoring the statistics REST endpoint accessible through the telemetry shell or APIs.
+The results were accessed by using the telemetry API to gather statistics:
vCPE Success scenario
@@ -114,20 +109,11 @@ ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e:
# Times are in milliseconds
- # Previous to the run, there was 1 failure as a consequence of testing
- # the flows before the stability load was initiated. There was
- # an additional failure encountered during the execution.
-
- "ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e": {
- "policyExecutedCount": 161328,
- "policyExecutedSuccessCount": 161326,
- "totalElapsedTime": 44932780,
- "averageExecutionTime": 278.5181741545175,
- "birthTime": 1616092087842,
- "lastStart": 1616356511841,
- "lastExecutionTime": 1616356541972,
- "policyExecutedFailCount": 2
- }
+ Control Loop Name: ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e
+ Number of Transactions Executed: 114007
+ Number of Successful Transactions: 112727
+ Number of Failure Transactions: 1280
+ Average Execution Time: 434.9942021103967 ms.
vCPE Failure scenario
@@ -139,16 +125,12 @@ ControlLoop-vCPE-Fail:
# Times are in milliseconds
- "ControlLoop-vCPE-Fail": {
- "policyExecutedCount": 250172,
- "policyExecutedSuccessCount": 0,
- "totalElapsedTime": 63258856,
- "averageExecutionTime": 252.8614553187407,
- "birthTime": 1616092143137,
- "lastStart": 1616440688824,
- "lastExecutionTime": 1616440689010,
- "policyExecutedFailCount": 250172
- }
+ Control Loop Name: ControlLoop-vCPE-Fail
+ Number of Transactions Executed: 114367
+ Number of Successful Transactions: 114367 (failure transactions are expected)
+ Number of Failure Transactions: 0 (success transactions are not expected)
+ Average Execution Time: 433.61750330077734 ms.
+
vDNS Success scenario
=====================
@@ -159,16 +141,12 @@ ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3:
# Times are in milliseconds
- "ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3": {
- "policyExecutedCount": 235438,
- "policyExecutedSuccessCount": 235438,
- "totalElapsedTime": 37564263,
- "averageExecutionTime": 159.550552587093,
- "birthTime": 1616092578063,
- "lastStart": 1616356511253,
- "lastExecutionTime": 1616356511653,
- "policyExecutedFailCount": 0
- }
+ Control Loop Name: ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3
+ Number of Transactions Executed: 237512
+ Number of Successful Transactions: 229532
+ Number of Failure Transactions: 7980
+ Average Execution Time: 268.028794334602 ms.
+
vDNS Failure scenario
=====================
@@ -179,16 +157,11 @@ ControlLoop-vDNS-Fail:
# Times are in milliseconds
- "ControlLoop-vDNS-Fail": {
- "policyExecutedCount": 2754574,
- "policyExecutedSuccessCount": 0,
- "totalElapsedTime": 14396495,
- "averageExecutionTime": 5.22639616869977,
- "birthTime": 1616092659237,
- "lastStart": 1616440696444,
- "lastExecutionTime": 1616440696444,
- "policyExecutedFailCount": 2754574
- }
+ Control Loop Name: ControlLoop-vDNS-Fail
+ Number of Transactions Executed: 1957987
+ Number of Successful Transactions: 1957987 (failure transactions are expected)
+ Number of Failure Transactions: 0 (success transactions are not expected)
+ Average Execution Time: 39.369322166081794
vFirewall Success scenario
@@ -200,17 +173,41 @@ ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a:
# Times are in milliseconds
- # Previous to the run, there were 2 failures as a consequence of testing
- # the flows before the stability load was initiated. There was
- # an additional failure encountered during the execution.
-
- "ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a": {
- "policyExecutedCount": 145197,
- "policyExecutedSuccessCount": 145194,
- "totalElapsedTime": 33100249,
- "averageExecutionTime": 227.96785746261975,
- "birthTime": 1616092985229,
- "lastStart": 1616356511732,
- "lastExecutionTime": 1616356541972,
- "policyExecutedFailCount": 3
- }
+ Control Loop Name: ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a
+ Number of Transactions Executed: 120308
+ Number of Successful Transactions: 118895
+ Number of Failure Transactions: 1413
+ Average Execution Time: 394.8609236293513 ms.
+
+
+Commentary
+==========
+
+There has been a degradation of performance observed in this release
+when compared with the previous one.
+Approximately 1% of transactions were not completed as expected for
+some use cases. Average Execution Times are extended as well.
+The unexpected results seem to point in the direction of the
+interactions of the distributed locking feature with the database.
+These areas as well as the conditions for the test need to be investigated
+further.
+
+.. code-block:: bash
+
+ # Common pattern in the audit.log for unexpected transaction completions
+
+ a8d637fc-a2d5-49f9-868b-5b39f7befe25||ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a|
+ policy:usecases:[org.onap.policy.drools-applications.controlloop.common:controller-usecases:1.9.0:usecases]|
+ 2021-10-12T19:48:02.052+00:00|2021-10-12T19:48:02.052+00:00|0|
+ null:operational.modifyconfig.EVENT.MANAGER.FINAL:1.0.0|dev-policy-drools-pdp-0|
+ ERROR|400|Target Lock was lost|||VNF.generic-vnf.vnf-name||dev-policy-drools-pdp-0||
+ dev-policy-drools-pdp-0|microservice.stringmatcher|
+ {vserver.prov-status=ACTIVE, vserver.is-closed-loop-disabled=false,
+ generic-vnf.vnf-name=fw0002vm002fw002, vserver.vserver-name=OzVServer}||||
+ INFO|Session org.onap.policy.drools-applications.controlloop.common:controller-usecases:1.9.0:usecases|
+
+ # The "Target Lock was lost" is a common message error in the unexpected results.
+
+
+END-OF-DOCUMENT
+