System Level Dialogues for CL docs.

- added a new page for system level dialogues
- fixed few missed hyperlinks on controlloops main page

Issue-ID: POLICY-3363
Change-Id: Iccc1a1493f594ed8f7d55da247d637567abff4ec
Signed-off-by: adheli.tavares <adheli.tavares@est.tech>

1 files changed, 198 insertions, 0 deletions

diff --git a/docs/clamp/controlloop/system-level-dialogues.rst b/docs/clamp/controlloop/system-level-dialogues.rst
new file mode 100644
index 00000000..4392e1e8
--- /dev/null
+++ b/docs/clamp/controlloop/system-level-dialogues.rst
@@ -0,0 +1,198 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+
+.. _system-level-label:
+
+System Level Dialogues
+######################
+
+
+.. contents::
+    :depth: 4
+
+
+The CLAMP Control Loop Runtime Lifecycle Management uses the following system level dialogues.
+These dialogues enable the CLAMP runtime capabilities described in :ref:`Section 2 of
+TOSCA Defined Control Loops: Architecture and Design <controlloop-capabilities>`.
+Design Time dialogues will be described in future releases of the system.
+
+
+1 Commissioning Dialogues
+=========================
+
+Commissioning dialogues are used to commission and decommission Control Loop Type definitions
+and to set the values of Common Parameters.
+
+Commissioning a Control Loop Type is a three-step process:
+
+#. The Control Loop Type must be created, that is the Control Loop Type definition must be
+   loaded and stored in the database. This step may be carried out over the REST interface or
+   using SDC distribution.
+
+#. The Common Properties of the Control Loop type must be assigned values and those values
+   must be stored in the database. This step is optional only if all mandatory common properties
+   have default values. The Common Property values may be set and amended over and over again
+   in multiple sessions until the Control Loop Type is primed.
+
+#. The Control Loop Type Definition and the Common Property values must be primed, that is
+   sent to the concerned participants. Once a Control Loop Type is primed, its Common Property
+   values can no longer be changed. To change Common Properties on a primed Control Loop Type,
+   all instances of the Control Loop Type must be removed and the Control Loop Type must be
+   de-primed.
+
+1.1 Commissioning a Control Loop Type Definition using the CLAMP GUI
+--------------------------------------------------------------------
+
+This dialogue corresponds to a "File → Import" menu on the CLAMP GUI. The documentation of
+future releases of the system will describe how the Design Time functionality interacts
+with the Runtime commissioning API.
+
+.. image:: images/system-dialogues/comissioning-clamp-gui.png
+
+1.2 Commissioning a Control Loop Type Definition using SDC
+----------------------------------------------------------
+
+.. image:: images/system-dialogues/comissioning-sdc.png
+
+1.3 Setting Common Properties for a Control Loop Type Definition
+----------------------------------------------------------------
+
+This dialogue sets the values of common properties. The values of the common properties
+may be set, updated, or deleted at will, as this dialogue saves the properties to the
+database but does not send the definitions or properties to the participants. However,
+once a Control Loop Type Definition and its properties are primed (See :ref:`Section 1.4
+<_priming-cl-label>`), the properties cannot be changed until the control loop type
+definition is de-primed (See :ref:`Section 1.5 <depriming-cl-label>`).
+
+.. image:: images/system-dialogues/common-properties-type-definition.png
+
+.. _priming-cl-label:
+
+1.4 Priming a Control Loop Type Definition on Participants
+----------------------------------------------------------
+The Priming operation sends Control Loop Type definitions and common property values
+to participants. Once a Control Loop Type definition is primed, its property values
+can on longer be changed until it is de-primed.
+
+.. image:: images/system-dialogues/priming-cl-type-definition.png
+
+.. _depriming-cl-label:
+
+1.5 De-Prime a Control Loop Type Definition on Participants
+-----------------------------------------------------------
+
+This dialogue allows a Control Loop Type Definition to be de-primed so that it can be
+deleted or its common parameter values can be altered.
+
+.. image:: images/system-dialogues/depriming-cl-type-definition.png
+
+1.6 Decommissioning a Control Loop Type Definition in CLAMP
+-----------------------------------------------------------
+
+.. image:: images/system-dialogues/decommission-cl-type-definition.png
+
+1.7 Reading Commissioned Control Loop Type Definitions
+------------------------------------------------------
+
+.. image:: images/system-dialogues/read-commision-cl-type-definition.png
+
+
+2. Instantiation Dialogues
+==========================
+
+Instantiation dialogues are used to create, set parameters on, instantiate, update,
+and remove Control Loop instances.
+
+Assume a suitable Control Loop Definition exists in the Commissioned Control Loop Inventory.
+To get a Control Loop instance running one would, for example, execute dialogues
+:ref:`2.1 <creating-cl-instance>`, :ref:`2.3 <updating-cl-instance-config>`, and
+:ref:`2.4 <changing-cl-instance-state>`.
+
+.. _creating-cl-instance:
+
+2.1 Creating a Control Loop Instance
+------------------------------------
+
+.. image:: images/system-dialogues/create-cl-instance.png
+
+.. note::
+    This dialogue creates the Control Loop Instance in the Instantiated Control Loop Inventory.
+    The instance is sent to the participants using the process described in the dialogue in
+    :ref:`Section 2.3 <updating-cl-instance-config>`.
+
+2.2 Updating Instance Specific Parameters on a Control Loop Instance
+--------------------------------------------------------------------
+
+.. image:: images/system-dialogues/update-instance-params-cl.png
+
+.. _updating-cl-instance-config:
+
+2.3 Updating a Control Loop Instance with a Configuration on Participants
+-------------------------------------------------------------------------
+
+.. image:: images/system-dialogues/update-cl-instance-config-participants.png
+
+.. _changing-cl-instance-state:
+
+2.4 Changing the state of a Control Loop Instance on Participants
+-----------------------------------------------------------------
+
+.. image:: images/system-dialogues/change-cl-instance-state-participants.png
+
+2.5 De-instantiating a Control Loop Instance from Participants
+--------------------------------------------------------------
+
+.. image:: images/system-dialogues/deinstantiate-cl-from-participants.png
+
+2.6 Deleting a Control Loop Instance
+------------------------------------
+
+.. image:: images/system-dialogues/delete-cl-instance.png
+
+2.7 Reading Control Loop Instances
+----------------------------------
+
+.. image:: images/system-dialogues/read-cl-instance.png
+
+
+1. Monitoring Dialogues
+=======================
+
+Monitoring dialogues are used to monitor and to read statistics on Control Loop Instances.
+
+3.1 Reporting of Monitoring Information and Statistics by Participants
+----------------------------------------------------------------------
+
+.. image:: images/system-dialogues/monitoring-by-participants.png
+
+3.2 Viewing of Monitoring Information
+-------------------------------------
+
+.. image:: images/system-dialogues/view-monitoring-info.png
+
+3.2 Viewing of Statistics
+-------------------------
+
+.. image:: images/system-dialogues/view-statistics.png
+
+3.3 Statistics Housekeeping
+---------------------------
+
+.. image:: images/system-dialogues/statistics-housekeeping.png
+
+
+4. Supervision Dialogues
+========================
+
+Supervision dialogues are used to check the state of Control Loop Instances and Participants.
+
+4.1 Supervise Participants
+--------------------------
+
+.. image:: images/system-dialogues/supervise-participants.png
+
+4.2 Supervise Control Loops
+---------------------------
+
+.. image:: images/system-dialogues/supervise-controlloops.png
+
+End of Document