diff options
Diffstat (limited to 'packages')
| -rw-r--r-- | packages/docker/README.md | 3 | ||||
| -rw-r--r-- | packages/docker/pom.xml | 71 | ||||
| -rw-r--r-- | packages/docker/src/main/docker/Dockerfile | 13 | ||||
| -rw-r--r-- | packages/docker/src/main/docker/do-start.sh | 94 | ||||
| -rw-r--r-- | packages/docker/src/main/docker/docker-install.sh | 740 | ||||
| -rw-r--r-- | packages/docker/src/main/docker/wait-for-port.sh | 18 | ||||
| -rw-r--r-- | packages/pom.xml | 2 |
7 files changed, 941 insertions, 0 deletions
diff --git a/packages/docker/README.md b/packages/docker/README.md new file mode 100644 index 000000000..519f31216 --- /dev/null +++ b/packages/docker/README.md @@ -0,0 +1,3 @@ +To build the policy-pe docker image: +1. Build the policy-pe repository +2. Run: policy-pe/docker-verify.sh or policy-pe/docker-build.sh or policy-pe/docker-merge.sh as required. diff --git a/packages/docker/pom.xml b/packages/docker/pom.xml new file mode 100644 index 000000000..02b1d871b --- /dev/null +++ b/packages/docker/pom.xml @@ -0,0 +1,71 @@ +<!-- + ============LICENSE_START======================================================= + ONAP Policy Engine - Docker files + ================================================================================ + Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. + ================================================================================ + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + ============LICENSE_END========================================================= + --> + +<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" + xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> + + <modelVersion>4.0.0</modelVersion> + + <parent> + <groupId>org.onap.policy.engine</groupId> + <artifactId>packages</artifactId> + <version>1.2.0-SNAPSHOT</version> + </parent> + + <groupId>org.onap.policy.engine</groupId> + <artifactId>docker</artifactId> + <version>1.2.0-SNAPSHOT</version> + <packaging>pom</packaging> + <name>Policy Engine - Docker build</name> + <description>ONAP Policy Docker Build</description> + + <properties> + <nexusproxy>https://nexus.onap.org</nexusproxy> + </properties> + + <build> + <plugins> + <plugin> + <groupId>org.codehaus.mojo</groupId> + <artifactId>exec-maven-plugin</artifactId> + <version>1.6.0</version> + <executions> + <execution> + <id>get-target-version</id> + <phase>prepare-package</phase> + <goals> + <goal>exec</goal> + </goals> + </execution> + </executions> + <configuration> + <executable>echo</executable> + <workingDirectory>${project.build.directory}</workingDirectory> + <arguments> + <argument>${project.version}</argument> + </arguments> + <outputFile>${project.build.directory}/version</outputFile> + </configuration> + </plugin> + + </plugins> + </build> + +</project> diff --git a/packages/docker/src/main/docker/Dockerfile b/packages/docker/src/main/docker/Dockerfile new file mode 100644 index 000000000..fe568082d --- /dev/null +++ b/packages/docker/src/main/docker/Dockerfile @@ -0,0 +1,13 @@ +FROM onap/policy/policy-base + +RUN mkdir -p /opt/app/policy /tmp/policy-install && chown policy /opt/app/policy /tmp/policy-install + +WORKDIR /tmp/policy-install + +COPY install.zip docker-install.sh do-start.sh wait-for-port.sh ./ +RUN unzip install.zip && rm install.zip && chown policy * && chmod +x *.sh + +USER policy + +ENTRYPOINT [ "bash", "./do-start.sh" ] + diff --git a/packages/docker/src/main/docker/do-start.sh b/packages/docker/src/main/docker/do-start.sh new file mode 100644 index 000000000..614ad1e89 --- /dev/null +++ b/packages/docker/src/main/docker/do-start.sh @@ -0,0 +1,94 @@ +#!/bin/bash + +# Script to configure and start the Policy components that are to run in the designated container, +# It is intended to be used as the entrypoint in the Dockerfile, so the last statement of the +# script just goes into a long sleep so that the script does not exit (which would cause the +# container to be torn down). + +container=$1 + +case $container in +pap) + comps="base pap paplp console mysql elk" + ;; +pdp) + comps="base pdp pdplp" + ;; +brmsgw) + comps="base brmsgw" + ;; +*) + echo "Usage: do-start.sh pap|pdp|brmsgw" >&2 + exit 1 +esac + + +# skip installation if build.info file is present (restarting an existing container) +if [[ -f /opt/app/policy/etc/build.info ]]; then + echo "Found existing installation, will not reinstall" + . /opt/app/policy/etc/profile.d/env.sh + +else + if [[ -d config ]]; then + cp config/*.conf . + fi + + for comp in $comps; do + echo "Installing component: $comp" + ./docker-install.sh --install $comp + done + for comp in $comps; do + echo "Configuring component: $comp" + ./docker-install.sh --configure $comp + done + + . /opt/app/policy/etc/profile.d/env.sh + + # install policy keystore + mkdir -p $POLICY_HOME/etc/ssl + cp config/policy-keystore $POLICY_HOME/etc/ssl + + if [[ -f config/$container-tweaks.sh ]] ; then + # file may not be executable; running it as an + # argument to bash avoids needing execute perms. + bash config/$container-tweaks.sh + fi + + if [[ $container == pap ]]; then + # wait for DB up + ./wait-for-port.sh mariadb 3306 + # now that DB is up, invoke database upgrade + # (which does nothing if the db is already up-to-date) + dbuser=$(echo $(grep '^JDBC_USER=' base.conf | cut -f2 -d=)) + dbpw=$(echo $(grep '^JDBC_PASSWORD=' base.conf | cut -f2 -d=)) + db_upgrade_remote.sh $dbuser $dbpw mariadb + fi + +fi + +# pap needs to wait for mariadb up before starting; +# others need to wait for pap up (in case it had to do db upgrade) +if [[ $container == pap ]]; then + # we may have already done this above, but doesn't hurt to repeat + ./wait-for-port.sh mariadb 3306 +else + ./wait-for-port.sh pap 9091 +fi + +policy.sh start + +# on pap, wait for pap, pdp, brmsgw, nexus and drools up, +# then push the initial default policies +if [[ $container == pap ]]; then + ./wait-for-port.sh pap 9091 + ./wait-for-port.sh pdp 8081 + # brmsgw doesn't have a REST API, so check for JMX port instead + ./wait-for-port.sh brmsgw 9989 + ./wait-for-port.sh nexus 8081 + ./wait-for-port.sh drools 6969 + # wait addional 1 minute for all processes to get fully initialized and synched up + sleep 60 + bash -xv config/push-policies.sh +fi + +sleep 1000d diff --git a/packages/docker/src/main/docker/docker-install.sh b/packages/docker/src/main/docker/docker-install.sh new file mode 100644 index 000000000..e8b9aaf14 --- /dev/null +++ b/packages/docker/src/main/docker/docker-install.sh @@ -0,0 +1,740 @@ +#!/bin/bash + +######################################################################### +## +## Functions +## +######################################################################### + +function usage() { + echo -n "syntax: $(basename $0) " + echo -n "--debug (" + echo -n "[--install base|pap|pdp|console|mysql|elk|brmsgw|paplp|pdplp] | " + echo -n "[--configure base|pap|pdp|console|mysql|elk|brmsgw|paplp|pdplp] | " +} + +function check_java() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + TARGET_JAVA_VERSION=$1 + + if [[ -z ${JAVA_HOME} ]]; then + echo "error: ${JAVA_HOME} is not set" + return 1 + fi + + if ! check_x_file "${JAVA_HOME}/bin/java"; then + echo "error: ${JAVA_HOME}/bin/java is not accessible" + return 1 + fi + + INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}') + if [[ -z $INSTALLED_JAVA_VERSION ]]; then + echo "error: ${JAVA_HOME}/bin/java is invalid" + return 1 + fi + + if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then + echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\ + "march desired version ${TARGET_JAVA_VERSION}" + return 1 + fi + + echo "OK: java ${INSTALLED_JAVA_VERSION} installed" + +} + +function process_configuration() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + CONF_FILE=$1 + while read line || [ -n "${line}" ]; do + if [[ -n ${line} ]] && [[ ${line} != \#* ]]; then + name=$(echo "${line%%=*}") + value=$(echo "${line#*=}") + # escape ampersand so that sed does not replace it with the search string + value=${value//&/\\&} + if [[ -z ${name} ]] || [[ -z $value ]]; then + echo "WARNING: ${line} missing name or value" + fi + export ${name}="${value}" + eval "${name}" "${value}" 2> /dev/null + fi + done < "${CONF_FILE}" + return 0 +} + +function component_preconfigure() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \ + -e 's!${{FQDN}}!'"${FQDN}!g" \ + *.conf > /dev/null 2>&1 +} + +function tomcat_component() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + TOMCAT_TARGET_INSTALL_DIR=${POLICY_HOME}/servers/${COMPONENT_TYPE} + if [[ -d ${TOMCAT_TARGET_INSTALL_DIR} ]]; then + echo "error: ${TOMCAT_TARGET_INSTALL_DIR} exists." + return 1 + fi + + TOMCAT_INSTALL_DIR=${POLICY_HOME}/install/3rdparty/${TOMCAT_PACKAGE_NAME}/ + if [[ -d ${TOMCAT_INSTALL_DIR} ]]; then + echo "error: ${TOMCAT_INSTALL_DIR} exists." + return 1 + fi + + tar -C "${POLICY_HOME}/servers" -xf "${POLICY_HOME}/install/3rdparty/${TOMCAT_PACKAGE_NAME}.tar.gz" + + mv "${POLICY_HOME}/servers/${TOMCAT_PACKAGE_NAME}" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + /bin/cp "${POLICY_HOME}"/install/servers/common/tomcat/bin/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin" + /bin/cp "${POLICY_HOME}"/install/servers/common/tomcat/conf/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/conf" + + /bin/cp "${POLICY_HOME}/install/servers/common/tomcat/init.d/tomcatd" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}" + /bin/sed -i -e "s!\${{COMPONENT_TYPE}}!${COMPONENT_TYPE}!g" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}" >/dev/null 2>&1 + + + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/webapps/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps" + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/bin/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin" >/dev/null 2>&1 + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/conf/* "${POLICY_HOME}/servers/${COMPONENT_TYPE}/conf" >/dev/null 2>&1 + + /bin/rm -fr "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/docs" \ + "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/examples" \ + "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/ROOT" \ + "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/manager" \ + "${POLICY_HOME}/servers/${COMPONENT_TYPE}/webapps/host-manager" + + if [[ ${COMPONENT_TYPE} == console ]]; then + install_onap_portal_settings + fi + + return 0 +} + +function configure_tomcat_component() { + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" +} + +function configure_component() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + if ! process_configuration "${COMPONENT_TYPE}.conf"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf" + exit 1 + fi + + CONF_FILE=$1 + COMPONENT_ROOT_DIR=$2 + + SED_LINE="sed -i" + SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' " + SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' " + SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' " + SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' " + SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' " + SED_LINE+=" -e 's!\${{COMPONENT_TYPE}}!${COMPONENT_TYPE}!g' " + + while read line || [ -n "${line}" ]; do + if [[ -n $line ]] && [[ $line != \#* ]]; then + name=$(echo "${line%%=*}") + value=$(echo "${line#*=}") + # escape ampersand so that sed does not replace it with the search string + value=${value//&/\\&} + if [[ -z ${name} ]] || [[ -z ${value} ]]; then + echo "WARNING: ${line} missing name or value" + fi + SED_LINE+=" -e 's!\${{${name}}}!${value}!g' " + + fi + done < "$CONF_FILE" + + SED_FILES="" + for sed_file in $(find "${COMPONENT_ROOT_DIR}" -name '*.xml' -o -name '*.sh' -o -name '*.properties' -o -name '*.conf' -o -name '*.cfg' -o -name '*.template' -o -name '*.conf' -o -name '*.cron' -o -name '*.json' | grep -v /backup/); do + if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then + SED_FILES+="${sed_file} " + fi + done + + if [[ -f $HOME/.m2/settings.xml ]]; then + SED_FILES+="$HOME/.m2/settings.xml " + fi + + + if [[ -z ${SED_FILES} ]]; then + echo "WARNING: no xml, sh, properties, or conf files to perform configuration expansion" + else + SED_LINE+=${SED_FILES} + eval "${SED_LINE}" + fi + + list_unexpanded_files ${POLICY_HOME} +} + +function install_onap_portal_settings() { + echo "Install onap portal settings" + + # unpack onap war file + mkdir -p "${POLICY_HOME}"/servers/console/webapps/onap + cd "${POLICY_HOME}"/servers/console/webapps/onap + unzip -q ../onap.war + cd ${INSTALL_DIR} + + # copy over the configured settings + /bin/cp -fr "${POLICY_HOME}"/install/servers/onap/* "${POLICY_HOME}/servers/console/webapps/onap" +} + +function check_r_file() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + FILE=$1 + if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then + return 1 + fi + + return 0 +} + +function check_x_file() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + FILE=$1 + if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then + return 1 + fi + + return 0 +} + +function install_prereqs() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + CONF_FILE=$1 + + if ! check_r_file "${CONF_FILE}"; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible" + exit 1 + fi + + if ! process_configuration "${CONF_FILE}"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}" + exit 1 + fi + +# if ! check_java "1.8"; then +# echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version" +# exit 1 +# fi + + if [[ -z ${POLICY_HOME} ]]; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set" + exit 1 + fi + + HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}') + if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory" + exit 1 + fi + + echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} " + echo "ownership with umask $(umask)." +} + +function list_unexpanded_files() { + ROOT_DIR=$1 + SEARCH_LIST=$(find ${ROOT_DIR} -type f -name '*.properties' -o -name '*.sh' -o -name '*.conf' -o -name '*.yml' -o -name '*.template' -o -name '*.xml' -o -name '*.cfg' -o -name '*.json' -o -path "${ROOT_DIR}/etc/init.d/*" | egrep -v '/m2/|/install/|/logs/') + NOT_EXPANDED_BASE_FILES=$(grep -l '${{' ${SEARCH_LIST} 2> /dev/null) + if [[ -n ${NOT_EXPANDED_BASE_FILES} ]]; then + echo "error: component installation has completed but some base files have not been expanded:" + echo "${NOT_EXPANDED_BASE_FILES}" + return 1 + fi + return 0 +} + +function install_base() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + install_prereqs "${BASE_CONF}" + + if [[ -z ${POLICY_HOME} ]]; then + echo "error: ${POLICY_HOME} is not set" + exit 1 + fi + + POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null) + if [[ -n ${POLICY_HOME_CONTENTS} ]]; then + echo "error: aborting base installation: ${POLICY_HOME} directory is not empty" + exit 1 + fi + + if [[ ! -d ${POLICY_HOME} ]]; then + echo "error: aborting base installation: ${POLICY_HOME} is not a directory." + exit 1 + fi + + if ! /bin/mkdir -p "${POLICY_HOME}/servers/" > /dev/null 2>&1; then + echo "error: aborting base installation: cannot create ${POLICY_HOME}/servers/" + exit 1 + fi + + if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then + echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/" + exit 1 + fi + + BASE_TGZ=$(ls base-*.tar.gz) + if [ ! -r ${BASE_TGZ} ]; then + echo "error: aborting base installation: ${POLICY_USER} cannot access tar file: ${BASE_TGZ}" + exit 1 + fi + + tar -tzf ${BASE_TGZ} > /dev/null 2>&1 + if [[ $? != 0 ]]; then + echo >&2 "error: aborting base installation: invalid base package tar file: ${BASE_TGZ}" + exit 1 + fi + + BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" + PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" + + tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner + if [[ $? != 0 ]]; then + # this should not happened + echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}" + exit 1 + fi + + /bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1 + /bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1 + /bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1 + /bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1 + + #list_unexpanded_files ${POLICY_HOME} +} + + +function configure_base() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + # check if fqdn is set in base.conf and use that value if set + if [[ -z ${INSTALL_FQDN} ]] + then + echo "FQDN not set in config...using the default FQDN ${FQDN}" + else + echo "Using FQDN ${INSTALL_FQDN} from config" + FQDN=${INSTALL_FQDN} + fi + + configure_component "${BASE_CONF}" "${POLICY_HOME}" + + BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" + PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" + + if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bash_profile" >/dev/null 2>&1; then + echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bash_profile" + fi + + if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then + echo "${PROFILE_LINE}" >> "${HOME}/.profile" + fi +} + +function install_tomcat_component() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + install_prereqs "${BASE_CONF}" + + if ! process_configuration "${COMPONENT_TYPE}.conf"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf" + exit 1 + fi + + if ! tomcat_component; then + echo "error: aborting ${COMPONENT_TYPE} installation: tomcat installation failed." + exit 1 + fi + +} + +# This function installs mysql related shell scripts and sql files in the proper locations +# under $POLICY_HOME. It also adds the MySQL client bin to the PATH based on configuration. +# +function install_mysql() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + install_prereqs "${BASE_CONF}" + + if ! process_configuration "${COMPONENT_TYPE}.conf"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf" + exit 1 + fi + + MYSQL_DATA_PATH=${POLICY_HOME}/data/mysql + /bin/mkdir -p ${MYSQL_DATA_PATH} > /dev/null 2>&1 + + /bin/cp -f "${POLICY_HOME}"/install/mysql/data/* "${MYSQL_DATA_PATH}" + /bin/chmod 555 "${MYSQL_DATA_PATH}"/* + + MYSQL_BIN_SOURCE=${POLICY_HOME}/install/mysql/bin + /bin/mkdir -p ${POLICY_HOME}/bin > /dev/null 2>&1 + for script in $(/bin/ls "${MYSQL_BIN_SOURCE}"); do + /bin/cp ${MYSQL_BIN_SOURCE}/${script} ${POLICY_HOME}/bin + /bin/chmod 555 "${POLICY_HOME}/bin/${script}" + done +} + +function configure_mysql() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + # nothing to do +} + +# This function installs elk related shell scripts and sql files in the proper locations +# under $POLICY_HOME. It also adds the Elk to the PATH based on configuration. +# +function configure_elk() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + # nothing to do +} + +function install_elk() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + if [[ -f "${HOME}/.bash_profile" ]]; then + source "${HOME}/.bash_profile" + fi + + if [[ -f "${HOME}/.profile" ]]; then + source "${HOME}/.profile" + fi + + ELK_TARGET_INSTALL_DIR="${POLICY_HOME}"/elk + + if [[ -d ${ELK_TARGET_INSTALL_DIR} ]]; then + echo "WARNING: ${ELK_TARGET_INSTALL_DIR} exists." + return 1 + fi + + /bin/mkdir -p "${ELK_TARGET_INSTALL_DIR}" > /dev/null 2>&1 + + if [[ ! -d ${ELK_TARGET_INSTALL_DIR} ]]; then + echo "WARNING: ${ELK_TARGET_INSTALL_DIR} doesn't exist." + return 1 + fi + + cd ${ELK_TARGET_INSTALL_DIR} + curl -L -O https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-5.4.0.tar.gz + + tar xvzf elasticsearch-5.4.0.tar.gz -C . + /bin/rm -fr elasticsearch-5.4.0.tar.gz + /bin/mv ${ELK_TARGET_INSTALL_DIR}/elasticsearch-5.4.0/* . + /bin/rm -fr ${ELK_TARGET_INSTALL_DIR}/elasticsearch-5.4.0 + + /bin/cp "${POLICY_HOME}"/install/elk/bin/* "${POLICY_HOME}/bin" + /bin/cp -f "${POLICY_HOME}"/install/elk/config/* "${ELK_TARGET_INSTALL_DIR}/config" + /bin/cp -f "${POLICY_HOME}/install/elk/init.d/elkd" "${POLICY_HOME}/etc/init.d/elk" + + install_prereqs "${COMPONENT_TYPE}.conf" + + /bin/sed -i -e "s!\${{POLICY_HOME}}!${POLICY_HOME}!g" \ + -e "s!\${{FQDN}}!${FQDN}!g" \ + -e "s!\${{ELK_JMX_PORT}}!${ELK_JMX_PORT}!g" \ + "${ELK_TARGET_INSTALL_DIR}"/config/* "${POLICY_HOME}/etc/init.d/elk" > /dev/null 2>&1 + + + list_unexpanded_files ${POLICY_HOME} + + return $? +} + +# This function installs brmsgw related shell scripts and config files in the proper +# locations under $POLICY_HOME. +# + +function install_brmsgw() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + install_prereqs "${BASE_CONF}" + + if ! process_configuration "${COMPONENT_TYPE}.conf"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf" + exit 1 + fi + + if [ -z "$M2_HOME" ]; then + echo "error: aborting ${COMPONENT_TYPE} installation: M2_HOME must be set in brmsgw.conf" + exit 1 + fi + + echo "export M2_HOME=$M2_HOME" >>$POLICY_HOME/etc/profile.d/env.sh + + /bin/cp -f "${POLICY_HOME}/install/servers/brmsgw/init.d/brmsgw" "${POLICY_HOME}/etc/init.d/brmsgw" + + if ! /bin/mkdir -p "${POLICY_HOME}/servers/${COMPONENT_TYPE}" > /dev/null 2>&1; then + echo "error: aborting base installation: cannot create ${POLICY_HOME}/servers/${COMPONENT_TYPE}" + exit 1 + fi + + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/BRMSGateway.jar "${POLICY_HOME}/servers/${COMPONENT_TYPE}" + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/*.properties "${POLICY_HOME}/servers/${COMPONENT_TYPE}" + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/config "${POLICY_HOME}/servers/${COMPONENT_TYPE}" + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/dependency.json "${POLICY_HOME}/servers/${COMPONENT_TYPE}" + + /bin/mv $POLICY_HOME/m2 $HOME/.m2 + + return 0 +} + + +function install_logparser() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + install_prereqs "${BASE_CONF}" + + if ! process_configuration "${COMPONENT_TYPE}.conf"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${COMPONENT_TYPE}.conf" + exit 1 + fi + + LP_TARGET_DIR=${POLICY_HOME}/servers/${COMPONENT_TYPE} + /bin/mkdir -p ${LP_TARGET_DIR}/bin > /dev/null 2>&1 + /bin/mkdir -p ${LP_TARGET_DIR}/logs > /dev/null 2>&1 + + # copy binaries, initialization script and configuration + /bin/cp "${POLICY_HOME}"/install/servers/common/logparser/bin/*jar "${LP_TARGET_DIR}/bin" + /bin/cp "${POLICY_HOME}/install/servers/common/logparser/init.d/logparserd" "${POLICY_HOME}/etc/init.d/${COMPONENT_TYPE}" + /bin/cp "${POLICY_HOME}/install/servers/${COMPONENT_TYPE}/bin/parserlog.properties" "${LP_TARGET_DIR}/bin" + /bin/cp -fr "${POLICY_HOME}"/install/servers/${COMPONENT_TYPE}/bin/config "${POLICY_HOME}/servers/${COMPONENT_TYPE}/bin" + +} + +######################################################################### +## +## script execution body +## +######################################################################### + + +OPERATION=none +COMPONENT_TYPE=none +DEBUG=n + +BASE_CONF=base.conf + +TOMCAT_PACKAGE_NAME=apache-tomcat-8.0.23 + +INSTALL_DIR="$(pwd)" + +export POLICY_USER=$(/usr/bin/id -un) + +# command line options parsing +until [[ -z "$1" ]]; do + case $1 in + -d|--debug) DEBUG=y + set -x + ;; + -i|--install) OPERATION=install + shift + COMPONENT_TYPE=$1 + ;; + -c|--configure) OPERATION=configure + shift + COMPONENT_TYPE=$1 + ;; + *) usage + exit 1 + ;; + esac + shift +done + +# component-type validation +case $COMPONENT_TYPE in + base) ;; + pdp) ;; + pap) ;; + console) ;; + mysql) ;; + elk) ;; + brmsgw) ;; + paplp) ;; + pdplp) ;; + skip) ;; + *) echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}"; + usage + exit 1 + ;; +esac + +# operation validation +case $OPERATION in + install|configure) ;; + *) echo "invalid operation (${OPERATION}): must be in {install|configure}"; + usage + exit 1 + ;; +esac + +if [[ -n ${POLICY_GROUP} ]]; then + groups=$(groups) + if ! echo ${groups} | grep -qP "\b${POLICY_GROUP}"; then + echo "error: ${POLICY_GROUP} is not a valid group for account ${POLICY_USER}" + exit 1 + fi +fi + +if [[ -z ${POLICY_GROUP} ]]; then + numGroups=$(groups | sed "s/^.*: *//g" | wc -w) + if [ ${numGroups} -eq 1 ]; then + export POLICY_GROUP=$(groups ${POLICY_USER} | sed "s/^.*: *//g") + else + echo "error: ${POLICY_USER} belongs to multiple groups, one group \ + must be provided for the installation" + usage + exit 1 + fi +fi + +if [[ -z ${POLICY_GROUP} ]]; then + echo "error: installation of root section must not provide the \ + installation group owner argument." + usage + exit 1 +fi + +FQDN=$(hostname -f 2> /dev/null) +if [[ $? != 0 || -z ${FQDN} ]]; then + echo "error: cannot determine the FQDN for this host $(hostname)." + exit 1 +fi + +if [[ ${OPERATION} == install ]]; then + case $COMPONENT_TYPE in + base) + install_base + ;; + pdp) + install_tomcat_component + ;; + pap) + install_tomcat_component + ;; + console) + install_tomcat_component + ;; + mysql) + install_mysql + ;; + elk) + install_elk + ;; + brmsgw) + install_brmsgw + ;; + paplp|pdplp) + install_logparser + ;; + *) + echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}"; + usage + exit 1 + ;; + esac +fi +if [[ ${OPERATION} == configure ]]; then + + install_prereqs "${BASE_CONF}" + + case $COMPONENT_TYPE in + base) + configure_base + component_preconfigure + ;; + pdp) + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + ;; + pap) + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + ;; + console) + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + ;; + mysql) + configure_mysql + ;; + elk) + configure_elk + ;; + brmsgw) + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + ;; + paplp|pdplp) + configure_component "${COMPONENT_TYPE}.conf" "${POLICY_HOME}/servers/${COMPONENT_TYPE}/" + ;; + *) + echo "invalid component type (${COMPONENT_TYPE}): must be in {base|pdp|pap|console|mysql|elk|brmsgw|paplp|pdplp}"; + usage + exit 1 + ;; + esac +fi + + +echo -n "Successful ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} " +echo "ownership with umask $(umask)." diff --git a/packages/docker/src/main/docker/wait-for-port.sh b/packages/docker/src/main/docker/wait-for-port.sh new file mode 100644 index 000000000..10f08ded1 --- /dev/null +++ b/packages/docker/src/main/docker/wait-for-port.sh @@ -0,0 +1,18 @@ +#!/bin/bash + +if [[ $# -ne 2 ]]; then + echo "Usage: wait-for-port hostname port" >&2 + exit 1 +fi + +host=$1 +port=$2 + +echo "Waiting for $host port $port open" +until telnet $host $port </dev/null 2>/dev/null | grep -q '^Connected'; do + sleep 1 +done + +echo "$host port $port is open" + +exit 0 diff --git a/packages/pom.xml b/packages/pom.xml index e8f81638e..4e2885e22 100644 --- a/packages/pom.xml +++ b/packages/pom.xml @@ -46,6 +46,7 @@ <modules> <module>base</module> <module>install</module> + <module>docker</module> </modules> </profile> @@ -61,5 +62,6 @@ <modules> <module>base</module> <module>install</module> + <module>docker</module> </modules> </project> |