summaryrefslogtreecommitdiffstats
path: root/packages/base
diff options
context:
space:
mode:
Diffstat (limited to 'packages/base')
-rw-r--r--packages/base/src/assembly/zip.xml6
-rw-r--r--packages/base/src/files/bin/backup.sh1
-rw-r--r--packages/base/src/files/bin/policy.sh12
-rw-r--r--packages/base/src/files/etc/cron.d/audit.cron1
-rw-r--r--packages/base/src/files/etc/cron.d/logrotate.cron2
-rw-r--r--packages/base/src/files/etc/logrotate.d/elk.conf7
-rw-r--r--packages/base/src/files/etc/monitor/monitor.cfg4
-rw-r--r--packages/base/src/files/install/elk/bin/elk.sh166
-rw-r--r--packages/base/src/files/install/elk/config/elasticsearch.yml392
-rw-r--r--packages/base/src/files/install/elk/init.d/elkd76
-rw-r--r--packages/base/src/files/install/servers/brmsgw/client.properties3
-rw-r--r--packages/base/src/files/install/servers/pdp/bin/client.properties21
12 files changed, 667 insertions, 24 deletions
diff --git a/packages/base/src/assembly/zip.xml b/packages/base/src/assembly/zip.xml
index 60731cb98..28ab2d7d7 100644
--- a/packages/base/src/assembly/zip.xml
+++ b/packages/base/src/assembly/zip.xml
@@ -45,12 +45,6 @@
<directoryMode>700</directoryMode>
</fileSet>
<fileSet>
- <directory>${project.build.directory}/pypdp/webapps</directory>
- <outputDirectory>install/servers/pypdp/webapps</outputDirectory>
- <fileMode>700</fileMode>
- <directoryMode>700</directoryMode>
- </fileSet>
- <fileSet>
<directory>${project.build.directory}/pdp/webapps</directory>
<outputDirectory>install/servers/pdp/webapps</outputDirectory>
<fileMode>700</fileMode>
diff --git a/packages/base/src/files/bin/backup.sh b/packages/base/src/files/bin/backup.sh
index 75cca7388..a40638cab 100644
--- a/packages/base/src/files/bin/backup.sh
+++ b/packages/base/src/files/bin/backup.sh
@@ -74,7 +74,6 @@ function backup() {
--exclude backup \
--exclude servers/pap/webapps/pap \
--exclude servers/pdp/webapps/pdp \
- --exclude servers/pypdp/webapps/PyPDPServer \
--exclude servers/console/webapps/policy \
${POLICY_HOME}/* \
${BACKUP_DIR}
diff --git a/packages/base/src/files/bin/policy.sh b/packages/base/src/files/bin/policy.sh
index 0b061a46e..a7500947a 100644
--- a/packages/base/src/files/bin/policy.sh
+++ b/packages/base/src/files/bin/policy.sh
@@ -104,10 +104,6 @@ function policy_status() {
component_status configs
fi
- if check_x_file "${POLICY_HOME}/etc/init.d/pypdp"; then
- component_status pypdp
- fi
-
if check_x_file "${POLICY_HOME}/etc/init.d/console"; then
component_status console
fi
@@ -147,10 +143,6 @@ function policy_start() {
component_start configs
fi
- if check_x_file "${POLICY_HOME}/etc/init.d/pypdp"; then
- component_start pypdp
- fi
-
if check_x_file "${POLICY_HOME}/etc/init.d/console"; then
component_start console
fi
@@ -195,10 +187,6 @@ function policy_stop() {
if check_x_file "${POLICY_HOME}/etc/init.d/console"; then
component_stop console
fi
-
- if check_x_file "${POLICY_HOME}/etc/init.d/pypdp"; then
- component_stop pypdp
- fi
if check_x_file "${POLICY_HOME}/etc/init.d/configs"; then
component_stop configs
diff --git a/packages/base/src/files/etc/cron.d/audit.cron b/packages/base/src/files/etc/cron.d/audit.cron
new file mode 100644
index 000000000..1e6bbee1b
--- /dev/null
+++ b/packages/base/src/files/etc/cron.d/audit.cron
@@ -0,0 +1 @@
+0 0 * * * . ${{POLICY_HOME}}/etc/profile.d/env.sh; elk.sh --audit < /dev/null > /dev/null 2>&1
diff --git a/packages/base/src/files/etc/cron.d/logrotate.cron b/packages/base/src/files/etc/cron.d/logrotate.cron
index aa78eed24..32301443b 100644
--- a/packages/base/src/files/etc/cron.d/logrotate.cron
+++ b/packages/base/src/files/etc/cron.d/logrotate.cron
@@ -1 +1 @@
-5 1 * * * /usr/sbin/logrotate -s ${{POLICY_HOME}}/var/logrotate.status ${{POLICY_HOME}}/etc/logrotate.d/monitor.conf
+5 1 * * * /usr/sbin/logrotate -s ${{POLICY_HOME}}/var/logrotate.status ${{POLICY_HOME}}/etc/logrotate.d/elk.conf ${{POLICY_HOME}}/etc/logrotate.d/monitor.conf
diff --git a/packages/base/src/files/etc/logrotate.d/elk.conf b/packages/base/src/files/etc/logrotate.d/elk.conf
new file mode 100644
index 000000000..3bc69b87e
--- /dev/null
+++ b/packages/base/src/files/etc/logrotate.d/elk.conf
@@ -0,0 +1,7 @@
+${{POLICY_HOME}}/logs/elk.log {
+ daily
+ rotate 10
+ compress
+ missingok
+ copytruncate
+}
diff --git a/packages/base/src/files/etc/monitor/monitor.cfg b/packages/base/src/files/etc/monitor/monitor.cfg
index 5314839e1..bc2642b64 100644
--- a/packages/base/src/files/etc/monitor/monitor.cfg
+++ b/packages/base/src/files/etc/monitor/monitor.cfg
@@ -1,5 +1,5 @@
# Line Format: component=status where
-# component=pap|pdp|pypdp|configs|console|paplp|pdplp and
+# component=pap|pdp|configs|console|elk|paplp|pdplp and
# status=on|off|uninstalled where
# on: component is to be monitored and should started
# off: component is to be monitored and should stopped
@@ -9,8 +9,8 @@
pap=uninstalled
pdp=uninstalled
configs=uninstalled
-pypdp=uninstalled
console=uninstalled
+elk=uninstalled
paplp=uninstalled
pdplp=uninstalled
brmsgw=uninstalled
diff --git a/packages/base/src/files/install/elk/bin/elk.sh b/packages/base/src/files/install/elk/bin/elk.sh
new file mode 100644
index 000000000..5011aa61e
--- /dev/null
+++ b/packages/base/src/files/install/elk/bin/elk.sh
@@ -0,0 +1,166 @@
+#!/bin/bash
+
+ELK_MAP_SUCCESS_RE="\"acknowledged\": *true"
+
+function usage() {
+ echo -n "syntax: $(basename $0) "
+ echo -n "[--debug] "
+ echo -n "([--audit] |"
+}
+
+function log() {
+ echo "$(date +"%Y-%m-%d_%H-%M-%S") $1" >> ${POLICY_HOME}/logs/elk.log
+ echo "$1"
+}
+
+function delete_index() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ COMMAND="curl --silent -X DELETE http://localhost:9200/policy"
+ OUTPUT="$(${COMMAND} 2>&1)"
+ RC=$?
+
+ log "${RC}: ${COMMAND}"
+ log "${OUTPUT}"
+
+ if [[ ${RC} != 0 ]] || [[ ! ${OUTPUT} =~ ${ELK_MAP_SUCCESS_RE} ]]; then
+ log "WARNING: curl: delete /policy: ${RC}"
+ return 1
+ fi
+
+ log "OK: curl: delete /policy: ${OUTPUT}"
+ return 0
+}
+
+function create_index() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ COMMAND="curl --silent -X PUT http://localhost:9200/policy"
+ OUTPUT="$(${COMMAND} 2>&1)"
+ RC=$?
+
+ log "${RC}: ${COMMAND}"
+ log "${OUTPUT}"
+
+ if [[ ${RC} != 0 ]] || [[ ! ${OUTPUT} =~ ${ELK_MAP_SUCCESS_RE} ]]; then
+ log "ERROR: curl: put /policy: ${RC}"
+ return 1
+ fi
+
+ log "OK: curl: put /policy."
+ return 0
+}
+
+function check_elk_status() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ ${POLICY_HOME}/etc/init.d/elk status
+ if [[ $? != 0 ]]; then
+ log "ERROR: elk is down. Aborting .."
+ exit 1
+ fi
+}
+
+function check_elk_policy_index() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ COMMAND="curl --silent -X GET http://localhost:9200/policy"
+ OUTPUT="$(${COMMAND} 2>&1)"
+ RC=$?
+
+ log "${RC}: ${COMMAND}"
+
+ if [[ ${RC} != 0 ]] || [[ ! ${OUTPUT} =~ policy ]]; then
+ log "ERROR: curl: get /policy: ${RC}"
+ return 1
+ fi
+
+ log "OK: curl: get /policy."
+ return 0
+}
+
+#The Script will update the policy data on querying from database as a bulk to Elastic Database
+function audit() {
+ if [[ $DEBUG == y ]]; then
+ echo "-- ${FUNCNAME[0]} $@ --"
+ set -x
+ fi
+
+ check_elk_status
+
+ if ! check_elk_policy_index; then
+ echo "policy index does not exist. So, Policy Index is created."
+ if ! create_index; then
+ echo "abort: policy index creation failed."
+ exit 1
+ fi
+ fi
+
+ $JAVA_HOME/bin/java -cp $POLICY_HOME/servers/pap/webapps/pap/WEB-INF/lib/ECOMP-PAP-REST-*.jar:$POLICY_HOME/servers/pap/webapps/pap/WEB-INF/lib/*: -DPROPERTY_FILE=$POLICY_HOME/servers/pap/bin/policyelk.properties org.openecomp.policy.pap.xacml.rest.elk.client.ElasticSearchPolicyUpdate
+}
+
+#########################################################################
+##
+## script execution body
+##
+#########################################################################
+
+DEBUG=n
+OPERATION=none
+
+until [[ -z "$1" ]]; do
+ case $1 in
+ -d|--debug|debug) DEBUG=y
+ set -x
+ ;;
+ -a|--audit|audit) OPERATION=audit
+ ;;
+ *) usage
+ exit 1
+ ;;
+ esac
+ shift
+done
+
+# operation validation
+case $OPERATION in
+ audit) ;;
+ *) echo "invalid operation (${OPERATION}).";
+ usage
+ exit 1
+ ;;
+esac
+
+if [[ -z ${POLICY_HOME} ]]; then
+ echo "error: POLICY_HOME is unset."
+ exit 1
+fi
+
+log "**** $OPERATION ****"
+
+if pidof -o %PPID -x $(basename $0) > /dev/null 2>&1; then
+ echo "WARNING: an $(basename $0) process is already running. Exiting."
+ exit 1
+fi
+
+case $OPERATION in
+ audit)
+ audit
+ ;;
+ *) echo "invalid operation (${OPERATION}).";
+ usage
+ exit 1
+ ;;
+esac \ No newline at end of file
diff --git a/packages/base/src/files/install/elk/config/elasticsearch.yml b/packages/base/src/files/install/elk/config/elasticsearch.yml
new file mode 100644
index 000000000..618f2a241
--- /dev/null
+++ b/packages/base/src/files/install/elk/config/elasticsearch.yml
@@ -0,0 +1,392 @@
+##################### Elasticsearch Configuration Example #####################
+
+# This file contains an overview of various configuration settings,
+# targeted at operations staff. Application developers should
+# consult the guide at <http://elasticsearch.org/guide>.
+#
+# The installation procedure is covered at
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup.html>.
+#
+# Elasticsearch comes with reasonable defaults for most settings,
+# so you can try it out without bothering with configuration.
+#
+# Most of the time, these defaults are just fine for running a production
+# cluster. If you're fine-tuning your cluster, or wondering about the
+# effect of certain configuration option, please _do ask_ on the
+# mailing list or IRC channel [http://elasticsearch.org/community].
+
+# Any element in the configuration can be replaced with environment variables
+# by placing them in ${...} notation. For example:
+#
+#node.rack: ${RACK_ENV_VAR}
+
+# For information on supported formats and syntax for the config file, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/setup-configuration.html>
+
+
+################################### Cluster ###################################
+
+# Cluster name identifies your cluster for auto-discovery. If you're running
+# multiple clusters on the same network, make sure you're using unique names.
+#
+#cluster.name: elasticsearch
+cluster.name: ${{FQDN}}-policy-sa
+
+
+#################################### Node #####################################
+
+# Node names are generated dynamically on startup, so you're relieved
+# from configuring them manually. You can tie this node to a specific name:
+#
+#node.name: "Franz Kafka"
+node.name: "${{FQDN}}"
+
+# Every node can be configured to allow or deny being eligible as the master,
+# and to allow or deny to store the data.
+#
+# Allow this node to be eligible as a master node (enabled by default):
+#
+#node.master: true
+#
+# Allow this node to store data (enabled by default):
+#
+#node.data: true
+
+# You can exploit these settings to design advanced cluster topologies.
+#
+# 1. You want this node to never become a master node, only to hold data.
+# This will be the "workhorse" of your cluster.
+#
+#node.master: false
+#node.data: true
+#
+# 2. You want this node to only serve as a master: to not store any data and
+# to have free resources. This will be the "coordinator" of your cluster.
+#
+#node.master: true
+#node.data: false
+#
+# 3. You want this node to be neither master nor data node, but
+# to act as a "search load balancer" (fetching data from nodes,
+# aggregating results, etc.)
+#
+#node.master: false
+#node.data: false
+
+# Use the Cluster Health API [http://localhost:9200/_cluster/health], the
+# Node Info API [http://localhost:9200/_nodes] or GUI tools
+# such as <http://www.elasticsearch.org/overview/marvel/>,
+# <http://github.com/karmi/elasticsearch-paramedic>,
+# <http://github.com/lukas-vlcek/bigdesk> and
+# <http://mobz.github.com/elasticsearch-head> to inspect the cluster state.
+
+# A node can have generic attributes associated with it, which can later be used
+# for customized shard allocation filtering, or allocation awareness. An attribute
+# is a simple key value pair, similar to node.key: value, here is an example:
+#
+#node.rack: rack314
+
+# By default, multiple nodes are allowed to start from the same installation location
+# to disable it, set the following:
+node.max_local_storage_nodes: 1
+
+
+#################################### Index ####################################
+
+# You can set a number of options (such as shard/replica options, mapping
+# or analyzer definitions, translog settings, ...) for indices globally,
+# in this file.
+#
+# Note, that it makes more sense to configure index settings specifically for
+# a certain index, either when creating it or by using the index templates API.
+#
+# See <http://elasticsearch.org/guide/en/elasticsearch/reference/current/index-modules.html> and
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/indices-create-index.html>
+# for more information.
+
+# Set the number of shards (splits) of an index (5 by default):
+#
+#index.number_of_shards: 5
+
+# Set the number of replicas (additional copies) of an index (1 by default):
+#
+#index.number_of_replicas: 1
+
+# Note, that for development on a local machine, with small indices, it usually
+# makes sense to "disable" the distributed features:
+#
+index.number_of_shards: 1
+index.number_of_replicas: 0
+
+# These settings directly affect the performance of index and search operations
+# in your cluster. Assuming you have enough machines to hold shards and
+# replicas, the rule of thumb is:
+#
+# 1. Having more *shards* enhances the _indexing_ performance and allows to
+# _distribute_ a big index across machines.
+# 2. Having more *replicas* enhances the _search_ performance and improves the
+# cluster _availability_.
+#
+# The "number_of_shards" is a one-time setting for an index.
+#
+# The "number_of_replicas" can be increased or decreased anytime,
+# by using the Index Update Settings API.
+#
+# Elasticsearch takes care about load balancing, relocating, gathering the
+# results from nodes, etc. Experiment with different settings to fine-tune
+# your setup.
+
+# Use the Index Status API (<http://localhost:9200/A/_status>) to inspect
+# the index status.
+
+
+#################################### Paths ####################################
+
+# Path to directory containing configuration (this file and logging.yml):
+#
+#path.conf: /path/to/conf
+
+# Path to directory where to store index data allocated for this node.
+#
+#path.data: /path/to/data
+#
+# Can optionally include more than one location, causing data to be striped across
+# the locations (a la RAID 0) on a file level, favouring locations with most free
+# space on creation. For example:
+#
+#path.data: /path/to/data1,/path/to/data2
+
+# Path to temporary files:
+#
+#path.work: /path/to/work
+
+# Path to log files:
+#
+#path.logs: /path/to/logs
+path.logs: ${{POLICY_HOME}}/logs
+
+# Path to where plugins are installed:
+#
+#path.plugins: /path/to/plugins
+
+
+#################################### Plugin ###################################
+
+# If a plugin listed here is not installed for current node, the node will not start.
+#
+#plugin.mandatory: mapper-attachments,lang-groovy
+
+
+################################### Memory ####################################
+
+# Elasticsearch performs poorly when JVM starts swapping: you should ensure that
+# it _never_ swaps.
+#
+# Set this property to true to lock the memory:
+#
+#bootstrap.mlockall: true
+
+# Make sure that the ES_MIN_MEM and ES_MAX_MEM environment variables are set
+# to the same value, and that the machine has enough memory to allocate
+# for Elasticsearch, leaving enough memory for the operating system itself.
+#
+# You should also make sure that the Elasticsearch process is allowed to lock
+# the memory, eg. by using `ulimit -l unlimited`.
+
+
+############################## Network And HTTP ###############################
+
+# Elasticsearch, by default, binds itself to the 0.0.0.0 address, and listens
+# on port [9200-9300] for HTTP traffic and on port [9300-9400] for node-to-node
+# communication. (the range means that if the port is busy, it will automatically
+# try the next port).
+
+# Set the bind address specifically (IPv4 or IPv6):
+#
+#network.bind_host: 10.00.10.00
+
+# Set the address other nodes will use to communicate with this node. If not
+# set, it is automatically derived. It must point to an actual IP address.
+#
+#network.publish_host: 10.00.10.00
+
+# Set both 'bind_host' and 'publish_host':
+#
+#network.host: 10.00.10.00
+
+# Set a custom port for the node to node communication (9300 by default):
+#
+#transport.tcp.port: 9300
+
+# Enable compression for all communication between nodes (disabled by default):
+#
+#transport.tcp.compress: true
+
+# Set a custom port to listen for HTTP traffic:
+#
+#http.port: 9200
+
+# Set a custom allowed content length:
+#
+#http.max_content_length: 100mb
+
+# Disable HTTP completely:
+#
+#http.enabled: false
+
+
+################################### Gateway ###################################
+
+# The gateway allows for persisting the cluster state between full cluster
+# restarts. Every change to the state (such as adding an index) will be stored
+# in the gateway, and when the cluster starts up for the first time,
+# it will read its state from the gateway.
+
+# There are several types of gateway implementations. For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-gateway.html>.
+
+# The default gateway type is the "local" gateway (recommended):
+#
+#gateway.type: local
+
+# Settings below control how and when to start the initial recovery process on
+# a full cluster restart (to reuse as much local data as possible when using shared
+# gateway).
+
+# Allow recovery process after N nodes in a cluster are up:
+#
+#gateway.recover_after_nodes: 1
+
+# Set the timeout to initiate the recovery process, once the N nodes
+# from previous setting are up (accepts time value):
+#
+#gateway.recover_after_time: 5m
+
+# Set how many nodes are expected in this cluster. Once these N nodes
+# are up (and recover_after_nodes is met), begin recovery process immediately
+# (without waiting for recover_after_time to expire):
+#
+#gateway.expected_nodes: 2
+
+
+############################# Recovery Throttling #############################
+
+# These settings allow to control the process of shards allocation between
+# nodes during initial recovery, replica allocation, rebalancing,
+# or when adding and removing nodes.
+
+# Set the number of concurrent recoveries happening on a node:
+#
+# 1. During the initial recovery
+#
+#cluster.routing.allocation.node_initial_primaries_recoveries: 4
+#
+# 2. During adding/removing nodes, rebalancing, etc
+#
+#cluster.routing.allocation.node_concurrent_recoveries: 2
+
+# Set to throttle throughput when recovering (eg. 100mb, by default 20mb):
+#
+#indices.recovery.max_bytes_per_sec: 20mb
+
+# Set to limit the number of open concurrent streams when
+# recovering a shard from a peer:
+#
+#indices.recovery.concurrent_streams: 5
+
+
+################################## Discovery ##################################
+
+# Discovery infrastructure ensures nodes can be found within a cluster
+# and master node is elected. Multicast discovery is the default.
+
+# Set to ensure a node sees N other master eligible nodes to be considered
+# operational within the cluster. This should be set to a quorum/majority of
+# the master-eligible nodes in the cluster.
+#
+#discovery.zen.minimum_master_nodes: 1
+
+# Set the time to wait for ping responses from other nodes when discovering.
+# Set this option to a higher value on a slow or congested network
+# to minimize discovery failures:
+#
+#discovery.zen.ping.timeout: 3s
+
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-zen.html>
+
+# Unicast discovery allows to explicitly control which nodes will be used
+# to discover the cluster. It can be used when multicast is not present,
+# or to restrict the cluster communication-wise.
+#
+# 1. Disable multicast discovery (enabled by default):
+#
+#discovery.zen.ping.multicast.enabled: false
+#
+# 2. Configure an initial list of master nodes in the cluster
+# to perform discovery when new nodes (master or data) are started:
+#
+#discovery.zen.ping.unicast.hosts: ["host1", "host2:port"]
+
+# EC2 discovery allows to use AWS EC2 API in order to perform discovery.
+#
+# You have to install the cloud-aws plugin for enabling the EC2 discovery.
+#
+# For more information, see
+# <http://elasticsearch.org/guide/en/elasticsearch/reference/current/modules-discovery-ec2.html>
+#
+# See <http://elasticsearch.org/tutorials/elasticsearch-on-ec2/>
+# for a step-by-step tutorial.
+
+# GCE discovery allows to use Google Compute Engine API in order to perform discovery.
+#
+# You have to install the cloud-gce plugin for enabling the GCE discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-gce>.
+
+# Azure discovery allows to use Azure API in order to perform discovery.
+#
+# You have to install the cloud-azure plugin for enabling the Azure discovery.
+#
+# For more information, see <https://github.com/elasticsearch/elasticsearch-cloud-azure>.
+
+################################## Slow Log ##################################
+
+# Shard level query and fetch threshold logging.
+
+#index.search.slowlog.threshold.query.warn: 10s
+#index.search.slowlog.threshold.query.info: 5s
+#index.search.slowlog.threshold.query.debug: 2s
+#index.search.slowlog.threshold.query.trace: 500ms
+
+#index.search.slowlog.threshold.fetch.warn: 1s
+#index.search.slowlog.threshold.fetch.info: 800ms
+#index.search.slowlog.threshold.fetch.debug: 500ms
+#index.search.slowlog.threshold.fetch.trace: 200ms
+
+#index.indexing.slowlog.threshold.index.warn: 10s
+#index.indexing.slowlog.threshold.index.info: 5s
+#index.indexing.slowlog.threshold.index.debug: 2s
+#index.indexing.slowlog.threshold.index.trace: 500ms
+
+################################## GC Logging ################################
+
+#monitor.jvm.gc.young.warn: 1000ms
+#monitor.jvm.gc.young.info: 700ms
+#monitor.jvm.gc.young.debug: 400ms
+
+#monitor.jvm.gc.old.warn: 10s
+#monitor.jvm.gc.old.info: 5s
+#monitor.jvm.gc.old.debug: 2s
+
+################################## Security ################################
+
+# Uncomment if you want to enable JSONP as a valid return transport on the
+# http server. With this enabled, it may pose a security risk, so disabling
+# it unless you need it is recommended (it is disabled by default).
+#
+#http.jsonp.enable: true
+
+discovery.zen.ping.multicast.enabled: false
+node.local: true
+action.auto_create_index: false
diff --git a/packages/base/src/files/install/elk/init.d/elkd b/packages/base/src/files/install/elk/init.d/elkd
new file mode 100644
index 000000000..539b4be3e
--- /dev/null
+++ b/packages/base/src/files/install/elk/init.d/elkd
@@ -0,0 +1,76 @@
+#!/bin/bash
+
+ELK_BASE=${POLICY_HOME}/elk/
+ELK_RUNNING="^$JAVA_HOME/bin/java .* -cp.* org.elasticsearch.bootstrap.Elasticsearch$"
+COMPONENT=elk
+
+JMX_JAVA_OPTS="${JMX_JAVA_OPTS} -Dcom.sun.management.jmxremote"
+JMX_JAVA_OPTS="${JMX_JAVA_OPTS} -Dcom.sun.management.jmxremote.port=${{ELK_JMX_PORT}}"
+JMX_JAVA_OPTS="${JMX_JAVA_OPTS} -Dcom.sun.management.jmxremote.ssl=false"
+JMX_JAVA_OPTS="${JMX_JAVA_OPTS} -Dcom.sun.management.jmxremote.authenticate=false"
+
+RETVAL=0
+
+function update_monitor() {
+ COMPONENT=$1
+ STATUS=$2
+ if [[ -f ${POLICY_HOME}/etc/monitor/monitor.cfg ]]; then
+ /bin/sed -i.bak \
+ -e "s/^${COMPONENT}=.*/${COMPONENT}=${STATUS}/g" \
+ ${POLICY_HOME}/etc/monitor/monitor.cfg
+ fi
+}
+
+function stop() {
+ pkill -u ${POLICY_USER} -f "${ELK_RUNNING}" -TERM
+ RETVAL=$?
+ if [[ ${RETVAL} != 0 ]]; then
+ sleep 2
+ pkill -u ${POLICY_USER} -f "${ELK_RUNNING}" -KILL
+ RETVAL=$?
+ fi
+ update_monitor ${COMPONENT} off
+ sleep 1
+}
+
+function start() {
+ export JAVA_OPTS="${JAVA_OPTS} ${JMX_JAVA_OPTS}"
+ $POLICY_HOME/elk/bin/elasticsearch -d
+ RETVAL=$?
+ if [[ ${RETVAL} != 0 ]]; then
+ update_monitor ${COMPONENT} off
+ else
+ update_monitor ${COMPONENT} on
+ fi
+}
+
+# main
+
+case "$1" in
+ status)
+ pid=$(pgrep -f -u ${POLICY_USER} "${ELK_RUNNING}" 2> /dev/null)
+ RETVAL=$?
+ if [ $RETVAL -eq 0 ]; then
+ echo "running with pid ${pid}"
+ else
+ echo "stopped"
+ fi
+ ;;
+ restart)
+ stop
+ sleep 2
+ start
+ ;;
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ *)
+ echo "error: invalid option $@"
+ RETVAL=1
+ ;;
+esac
+
+exit ${RETVAL} \ No newline at end of file
diff --git a/packages/base/src/files/install/servers/brmsgw/client.properties b/packages/base/src/files/install/servers/brmsgw/client.properties
index 0b8dc258e..97156b66e 100644
--- a/packages/base/src/files/install/servers/brmsgw/client.properties
+++ b/packages/base/src/files/install/servers/brmsgw/client.properties
@@ -18,5 +18,4 @@
# ============LICENSE_END=========================================================
###
-python=test,MASTER
-PyPDPServer=test,MASTER \ No newline at end of file
+python=test,MASTER \ No newline at end of file
diff --git a/packages/base/src/files/install/servers/pdp/bin/client.properties b/packages/base/src/files/install/servers/pdp/bin/client.properties
new file mode 100644
index 000000000..97156b66e
--- /dev/null
+++ b/packages/base/src/files/install/servers/pdp/bin/client.properties
@@ -0,0 +1,21 @@
+###
+# ============LICENSE_START=======================================================
+# ECOMP Policy Engine
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+python=test,MASTER \ No newline at end of file