Add tooling for drools policy developers

This commit adds tooling to better support development activities
for drools developers.

1. deploy artifacts to nexus or to local file repository on demand.
   It also allows to test on a single drools instance without the
   dependency on a nexus repo.

2. make installation configuration files conform to same
   convention (all upper case).

Change-Id: Ia0a2fc25db2ef21b774a9eee4ed51d4b876a1993
Issue-ID: POLICY-1367
Signed-off-by: Jorge Hernandez <jorge.hernandez-herrero@att.com>

2 files changed, 43 insertions, 54 deletions

diff --git a/packages/docker/src/main/docker/do-start.sh b/packages/docker/src/main/docker/do-start.sh
index af7b3d9c..91402e62 100644
--- a/packages/docker/src/main/docker/do-start.sh
+++ b/packages/docker/src/main/docker/do-start.sh
@@ -3,7 +3,7 @@
 # ============LICENSE_START=======================================================
 # 
 # ================================================================================
-# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights reserved.
 # ================================================================================
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -50,11 +50,18 @@ else
 	    unzip -o ${app}
 	done
 
+    feats=$(ls config/feature*.zip 2> /dev/null)
+    for feat in $feats
+    do
+        echo "Feature found: ${feat}"
+        cp ${feat} .
+    done
+
 	echo "docker install at ${PWD}"
 
 	./docker-install.sh
 
-	. /opt/app/policy/etc/profile.d/env.sh
+	. ${POLICY_HOME}/etc/profile.d/env.sh
 
 	# allow user to override the key or/and the trust stores
 
diff --git a/packages/docker/src/main/docker/docker-install.sh b/packages/docker/src/main/docker/docker-install.sh
index 98560202..76f8fb27 100644
--- a/packages/docker/src/main/docker/docker-install.sh
+++ b/packages/docker/src/main/docker/docker-install.sh
@@ -199,39 +199,39 @@ function configure_settings() {
 	mkdir -p "${fileRepoUrl#file:}"
 		
 	# The following parameters are also used outside of this function.
-	# if snapshotRepositoryUrl and/or releaseRepositoryUrl is defined,
+	# if SNAPSHOT_REPOSITORY_URL and/or RELEASE_REPOSITORY_URL is defined,
 	# the corresponding ID and url will be updated below
 	releaseRepoID=${fileRepoID}
 	releaseRepoUrl=${fileRepoUrl}
 	snapshotRepoID=${fileRepoID}
 	snapshotRepoUrl=${fileRepoUrl}
 
-	# if both snapshotRepositoryUrl and releaseRepositoryUrl are null,
+	# if both SNAPSHOT_REPOSITORY_URL and RELEASE_REPOSITORY_URL are null,
 	# use standalone-settings.xml that just defines the file-based repo.
 	# if only one of them is specified, use file-based repo for the other.
-	if [[ -z "$snapshotRepositoryUrl" && -z $releaseRepositoryUrl ]]; then
-		echo "snapshotRepositoryUrl and releaseRepositoryUrl properties not set, configuring settings.xml for standalone operation"
-		mv $HOME_M2/standalone-settings.xml $HOME_M2/settings.xml
+	if [[ -z "${SNAPSHOT_REPOSITORY_URL}" && -z "${RELEASE_REPOSITORY_URL}" ]]; then
+		echo "SNAPSHOT_REPOSITORY_URL and RELEASE_REPOSITORY_URL properties not set, configuring settings.xml for standalone operation"
+		mv ${HOME_M2}/standalone-settings.xml ${HOME_M2}/settings.xml
 	else
 		rm $HOME_M2/standalone-settings.xml
 
-		if [[ -n "${snapshotRepositoryUrl}" ]] ; then
-			snapshotRepoID=${snapshotRepositoryID}
-			snapshotRepoUrl=${snapshotRepositoryUrl}
+		if [[ -n "${SNAPSHOT_REPOSITORY_URL}" ]] ; then
+			snapshotRepoID=${SNAPSHOT_REPOSITORY_ID}
+			snapshotRepoUrl=${SNAPSHOT_REPOSITORY_URL}
 		fi
-		if [[ -n "${releaseRepositoryUrl}" ]] ; then
-			releaseRepoID=${releaseRepositoryID}
-			releaseRepoUrl=${releaseRepositoryUrl}
+		if [[ -n "${RELEASE_REPOSITORY_URL}" ]] ; then
+			releaseRepoID=${RELEASE_REPOSITORY_ID}
+			releaseRepoUrl=${RELEASE_REPOSITORY_URL}
 		fi
 	fi
 
 	SED_LINE="sed -i"
-	SED_LINE+=" -e 's!\${{snapshotRepositoryID}}!${snapshotRepoID}!g' "
-	SED_LINE+=" -e 's!\${{snapshotRepositoryUrl}}!${snapshotRepoUrl}!g' "
-	SED_LINE+=" -e 's!\${{releaseRepositoryID}}!${releaseRepoID}!g' "
-	SED_LINE+=" -e 's!\${{releaseRepositoryUrl}}!${releaseRepoUrl}!g' "
-	SED_LINE+=" -e 's!\${{repositoryUsername}}!${repositoryUsername}!g' "
-	SED_LINE+=" -e 's!\${{repositoryPassword}}!${repositoryPassword}!g' "
+	SED_LINE+=" -e 's!\${{SNAPSHOT_REPOSITORY_ID}}!${snapshotRepoID}!g' "
+	SED_LINE+=" -e 's!\${{SNAPSHOT_REPOSITORY_URL}}!${snapshotRepoUrl}!g' "
+	SED_LINE+=" -e 's!\${{RELEASE_REPOSITORY_ID}}!${releaseRepoID}!g' "
+	SED_LINE+=" -e 's!\${{RELEASE_REPOSITORY_URL}}!${releaseRepoUrl}!g' "
+	SED_LINE+=" -e 's!\${{REPOSITORY_USERNAME}}!${REPOSITORY_USERNAME}!g' "
+	SED_LINE+=" -e 's!\${{REPOSITORY_PASSWORD}}!${REPOSITORY_PASSWORD}!g' "
 	SED_LINE+=" -e 's!\${{fileRepoID}}!${fileRepoID}!g' "
 	SED_LINE+=" -e 's!\${{fileRepoUrl}}!${fileRepoUrl}!g' "
 	
@@ -364,7 +364,7 @@ function configure_base() {
 		echo "${PROFILE_LINE}" >> "${HOME}/.profile"
 	fi
 
-	. "${POLICY_HOME}/etc/profile.d/env.sh"
+	source "${POLICY_HOME}/etc/profile.d/env.sh"
 	
 	cat "${POLICY_HOME}"/etc/cron.d/* | crontab
 }
@@ -445,17 +445,12 @@ function install_base() {
 	# Undo any changes in the $HOME directory if any
 	
 	BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
-#	PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
-		
+
 	# Note: using .bashrc instead of .bash_profile
 	if [[ -f ${HOME}/.bashrc ]]; then
-		/bin/sed -i.bak "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc"
+		/bin/sed -i "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc"
 	fi
-	
-#	if [[ -f ${HOME}/.profile ]]; then
-#		/bin/sed -i.bak "\:${PROFILE_LINE}:d" "${HOME}/.profile"
-#	fi
-	
+
 	tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner
 	if [[ $? != 0 ]]; then
 		# this should not happened
@@ -471,14 +466,6 @@ function install_base() {
 		fi
 	fi
 
-#	/bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/nagios/tmp > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1
-			
-#	chmod -R 755 ${POLICY_HOME}/nagios > /dev/null 2>&1
-	
 	if [[ -d $HOME_M2 ]]; then
 		echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP"
 		mv $HOME_M2 $HOME/m2.$TIMESTAMP
@@ -494,19 +481,16 @@ function install_base() {
 			exit 1
 		fi
 	fi
-	
-	configure_base
-	
+
+    # base.conf properties may have characters with special meaning to bash,
+    # so wrap all the values in quotes in the profile.d version so it can
+    # be sourced into scripts that need the values. Also remove any blanks
+    # that may be present around the = sign.
 	# save ${BASE_CONF} in PDP-D installation
 	cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d
-	
-#	if ! create_keystore; then
-#		echo "error: aborting base installation: creating keystore"
-#		exit 1
-#	fi
-	
-#	list_unexpanded_files ${POLICY_HOME}
+    sed -i -e "s/ *= */=/" -e "s/=\(.*$\)/='\1'/" ${POLICY_HOME}/etc/profile.d/base.conf
 
+	configure_base
 }
 
 function install_controller()
@@ -868,6 +852,7 @@ function installFeatures
 			if [[ -r "${featureConf}" ]]; then
 				configure_component "${featureConf}" "${FEATURES_HOME}"
 				cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d
+				sed -i -e "s/ *= */=/" -e "s/=\(.*$\)/='\1'/" "${POLICY_HOME}/etc/profile.d/${featureConf}"
 				echo "feature ${name} has been installed (configuration present)"
 			else
 				echo "feature ${name} has been installed (no configuration present)"
@@ -903,15 +888,12 @@ function do_install()
 	installFeatures
 	installArtifacts
 
+    appInstallers=$(ls apps*installer 2> /dev/null)
+    for appInstaller in ${appInstallers}; do
+        echo "Executing application installer ${appInstaller} .."
+        source ${appInstaller}
+    done
 
-	if [[ -f apps-controlloop-installer ]]; then
-		# if exists, any customizations to the 
-		# base drools installation from the drools apps
-		# is executed here
-
-		./apps-controlloop-installer
-	fi
-	
 	echo
 	echo "Installation complete"
 	echo "Please logoff and login again to update shell environment"