aboutsummaryrefslogtreecommitdiffstats
path: root/kubernetes/common/postgres
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/common/postgres')
-rw-r--r--kubernetes/common/postgres/charts/pgpool/Chart.yaml18
-rw-r--r--kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf677
-rw-r--r--kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf67
-rw-r--r--kubernetes/common/postgres/charts/pgpool/configs/pool_passwd2
-rw-r--r--kubernetes/common/postgres/charts/pgpool/requirements.yaml18
-rwxr-xr-xkubernetes/common/postgres/charts/pgpool/templates/configmap.yaml26
-rw-r--r--kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml68
-rw-r--r--kubernetes/common/postgres/charts/pgpool/templates/service.yaml26
-rw-r--r--kubernetes/common/postgres/charts/pgpool/values.yaml44
9 files changed, 946 insertions, 0 deletions
diff --git a/kubernetes/common/postgres/charts/pgpool/Chart.yaml b/kubernetes/common/postgres/charts/pgpool/Chart.yaml
new file mode 100644
index 0000000000..b57e72a6ee
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/Chart.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Postgres Server
+name: pgpool
+version: 3.0.0
diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf
new file mode 100644
index 0000000000..f335174f40
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf
@@ -0,0 +1,677 @@
+# ----------------------------
+# pgPool-II configuration file a custom version
+# ----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# Whitespace may be used. Comments are introduced with "#" anywhere on a line.
+# The complete list of parameter names and allowed values can be found in the
+# pgPool-II documentation.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pgpool reload". Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS
+#------------------------------------------------------------------------------
+
+# - pgpool Connection Settings -
+
+listen_addresses = '*'
+ # Host name or IP address to listen on:
+ # '*' for all, '' for no TCP/IP connections
+ # (change requires restart)
+#port = 9999
+port = 5432
+ # Port number
+ # (change requires restart)
+socket_dir = '/tmp'
+ # Unix domain socket path
+ # The Debian package defaults to
+ # /var/run/postgresql
+ # (change requires restart)
+
+
+# - pgpool Communication Manager Connection Settings -
+
+pcp_port = 9898
+ # Port number for pcp
+ # (change requires restart)
+pcp_socket_dir = '/tmp'
+ # Unix domain socket path for pcp
+ # The Debian package defaults to
+ # /var/run/postgresql
+ # (change requires restart)
+
+# - Backend Connection Settings -
+
+backend_hostname0 = '{{.Values.container.name.primary}}'
+backend_port0 = 5432
+backend_weight0= 1
+backend_flag0= 'DISALLOW_TO_FAILOVER'
+
+backend_hostname1 = '{{.Values.container.name.replica}}'
+backend_port1 = 5432
+backend_weight1= 1
+backend_flag1= 'DISALLOW_TO_FAILOVER'
+
+#backend_hostname0 = 'master'
+ # Host name or IP address to connect to for backend 0
+#backend_port0 = 5432
+ # Port number for backend 0
+#backend_weight0 = 1
+ # Weight for backend 0 (only in load balancing mode)
+#backend_data_directory0 = '/data'
+ # Data directory for backend 0
+#backend_flag0 = 'ALLOW_TO_FAILOVER'
+ # Controls various backend behavior
+ # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
+#backend_hostname1 = 'standby'
+#backend_port1 = 5432
+#backend_weight1 = 1
+#backend_data_directory1 = '/data1'
+#backend_flag1 = 'ALLOW_TO_FAILOVER'
+
+# - Authentication -
+
+enable_pool_hba = on
+ # Use pool_hba.conf for client authentication
+pool_passwd = 'pool_passwd'
+ # File name of pool_passwd for md5 authentication.
+ # "" disables pool_passwd.
+ # (change requires restart)
+authentication_timeout = 60
+ # Delay in seconds to complete client authentication
+ # 0 means no timeout.
+
+# - SSL Connections -
+
+ssl = off
+ # Enable SSL support
+ # (change requires restart)
+#ssl_key = './server.key'
+ # Path to }
<!--
  ============LICENSE_START=======================================================
  eventmanager
  ================================================================================
  Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
  ================================================================================
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
  
       http://www.apache.org/licenses/LICENSE-2.0
  
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
  ============LICENSE_END=========================================================
  -->

<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
	<modelVersion>4.0.0</modelVersion>
	<parent>
		<groupId>org.onap.policy.drools-applications</groupId>
		<artifactId>common</artifactId>
		<version>1.1.1-SNAPSHOT</version>
	</parent>
	<artifactId>eventmanager</artifactId>
	<dependencies>
		<dependency>
			<groupId>org.eclipse.persistence</groupId>
			<artifactId>org.eclipse.persistence.jpa</artifactId>
			<version>2.7.0</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>commons-io</groupId>
			<artifactId>commons-io</artifactId>
			<version>2.5</version>
			<scope>provided</scope>
	  	</dependency>
		<dependency>
			<groupId>com.att.research.xacml</groupId>
			<artifactId>xacml</artifactId>
			<version>1.0.0</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>actorServiceProvider</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>actor.appc</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>actor.so</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
                <dependency>
                        <groupId>org.onap.policy.drools-applications</groupId>
                        <artifactId>actor.vfc</artifactId>
                        <version>${project.version}</version>
                        <scope>provided</scope>
                </dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>actor.appclcm</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>guard</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>events</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>appc</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
                <dependency>
                        <groupId>org.onap.policy.drools-applications</groupId>
                        <artifactId>vfc</artifactId>
                        <version>${project.version}</version>
                        <scope>provided</scope>
                </dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>appclcm</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>trafficgenerator</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>junit</groupId>
			<artifactId>junit</artifactId>
			<version>4.12</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>com.google.code.gson</groupId>
			<artifactId>gson</artifactId>
			<version>2.5</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>sdc</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>aai</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>so</artifactId>
			<version>${project.version}</version>
			<scope>provided</scope>
		</dependency>
                <dependency>
                        <groupId>org.onap.policy.drools-applications</groupId>
                        <artifactId>vfc</artifactId>
                        <version>${project.version}</version>
                        <scope>provided</scope>
                </dependency>

	    <dependency>
	    <groupId>org.apache.httpcomponents</groupId>
	    <artifactId>httpclient</artifactId>
	    <version>4.5.2</version>
	    <scope>provided</scope>
	    </dependency>
	    <dependency>
	    <groupId>org.onap.policy.drools-pdp</groupId>
	    <artifactId>policy-management</artifactId>
	    <version>${project.version}</version>
	    <scope>provided</scope>
	    </dependency>
		<dependency>
			<groupId>org.onap.policy.drools-applications</groupId>
			<artifactId>simulators</artifactId>
			<version>${project.version}</version>
			<scope>test</scope>
		</dependency>
	</dependencies>
</project>
v>
+health_check_period = 20
+ # Health check period
+ # Disabled (0) by default
+health_check_timeout = 10
+ # Health check timeout
+ # 0 means no timeout
+health_check_user = '{{.Values.credentials.pgusername}}'
+ # Health check user
+health_check_password = '{{.Values.credentials.pgpassword}}'
+ # Password for health check user
+health_check_max_retries = 3
+connect_timeout = 10000 # Timeout value in milliseconds before giving up to connect to backend.
+
+ # Maximum number of times to retry a failed health check before giving up.
+health_check_retry_delay = 1
+ # Amount of time to wait (in seconds) between retries.
+
+
+#------------------------------------------------------------------------------
+# FAILOVER AND FAILBACK
+#------------------------------------------------------------------------------
+
+failover_command = ''
+ # Executes this command at failover
+ # Special values:
+ # %d = node id
+ # %h = host name
+ # %p = port number
+ # %D = database cluster path
+ # %m = new master node id
+ # %H = hostname of the new master node
+ # %M = old master node id
+ # %P = old primary node id
+ # %r = new master port number
+ # %R = new master database cluster path
+ # %% = '%' character
+failback_command = ''
+ # Executes this command at failback.
+ # Special values:
+ # %d = node id
+ # %h = host name
+ # %p = port number
+ # %D = database cluster path
+ # %m = new master node id
+ # %H = hostname of the new master node
+ # %M = old master node id
+ # %P = old primary node id
+ # %r = new master port number
+ # %R = new master database cluster path
+ # %% = '%' character
+
+fail_over_on_backend_error = off
+ # Initiates failover when reading/writing to the
+ # backend communication socket fails
+ # If set to off, pgpool will report an
+ # error and disconnect the session.
+
+search_primary_node_timeout = 10
+ # Timeout in seconds to search for the
+ # primary node when a failover occurs.
+ # 0 means no timeout, keep searching
+ # for a primary node forever.
+
+#------------------------------------------------------------------------------
+# ONLINE RECOVERY
+#------------------------------------------------------------------------------
+
+recovery_user = '{{.Values.credentials.pgusername}}'
+ # Online recovery user
+recovery_password = '{{.Values.credentials.pgpassword}}'
+ # Online recovery password
+recovery_1st_stage_command = ''
+ # Executes a command in first stage
+recovery_2nd_stage_command = ''
+ # Executes a command in second stage
+recovery_timeout = 90
+ # Timeout in seconds to wait for the
+ # recovering node's postmaster to start up
+ # 0 means no wait
+client_idle_limit_in_recovery = 0
+ # Client is disconnected after being idle
+ # for that many seconds in the second stage
+ # of online recovery
+ # 0 means no disconnection
+ # -1 means immediate disconnection
+
+
+#------------------------------------------------------------------------------
+# WATCHDOG
+#------------------------------------------------------------------------------
+
+# - Enabling -
+
+use_watchdog = off
+ # Activates watchdog
+ # (change requires restart)
+
+# -Connection to up stream servers -
+
+trusted_servers = ''
+ # trusted server list which are used
+ # to confirm network connection
+ # (hostA,hostB,hostC,...)
+ # (change requires restart)
+ping_path = '/bin'
+ # ping command path
+ # (change requires restart)
+
+# - Watchdog communication Settings -
+
+wd_hostname = ''
+ # Host name or IP address of this watchdog
+ # (change requires restart)
+wd_port = 9000
+ # port number for watchdog service
+ # (change requires restart)
+wd_authkey = ''
+ # Authentication key for watchdog communication
+ # (change requires restart)
+
+# - Virtual IP control Setting -
+
+delegate_IP = ''
+ # delegate IP address
+ # If this is empty, virtual IP never bring up.
+ # (change requires restart)
+ifconfig_path = '/sbin'
+ # ifconfig command path
+ # (change requires restart)
+if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
+ # startup delegate IP command
+ # (change requires restart)
+if_down_cmd = 'ifconfig eth0:0 down'
+ # shutdown delegate IP command
+ # (change requires restart)
+
+arping_path = '/usr/sbin' # arping command path
+ # (change requires restart)
+
+arping_cmd = 'arping -U $_IP_$ -w 1'
+ # arping command
+ # (change requires restart)
+
+# - Behaivor on escalation Setting -
+
+clear_memqcache_on_escalation = on
+ # Clear all the query cache on shared memory
+ # when standby pgpool escalate to active pgpool
+ # (= virtual IP holder).
+ # This should be off if client connects to pgpool
+ # not using virtual IP.
+ # (change requires restart)
+wd_escalation_command = ''
+ # Executes this command at escalation on new active pgpool.
+ # (change requires restart)
+
+# - Lifecheck Setting -
+
+# -- common --
+
+wd_lifecheck_method = 'heartbeat'
+ # Method of watchdog lifecheck ('heartbeat' or 'query')
+ # (change requires restart)
+wd_interval = 10
+ # lifecheck interval (sec) > 0
+ # (change requires restart)
+
+# -- heartbeat mode --
+
+wd_heartbeat_port = 9694
+ # Port number for receiving heartbeat signal
+ # (change requires restart)
+wd_heartbeat_keepalive = 2
+ # Interval time of sending heartbeat signal (sec)
+ # (change requires restart)
+wd_heartbeat_deadtime = 30
+ # Deadtime interval for heartbeat signal (sec)
+ # (change requires restart)
+heartbeat_destination0 = 'host0_ip1'
+ # Host name or IP address of destination 0
+ # for sending heartbeat signal.
+ # (change requires restart)
+heartbeat_destination_port0 = 9694
+ # Port number of destination 0 for sending
+ # heartbeat signal. Usually this is the
+ # same as wd_heartbeat_port.
+ # (change requires restart)
+heartbeat_device0 = ''
+ # Name of NIC device (such like 'eth0')
+ # used for sending/receiving heartbeat
+ # signal to/from destination 0.
+ # This works only when this is not empty
+ # and pgpool has root privilege.
+ # (change requires restart)
+
+#heartbeat_destination1 = 'host0_ip2'
+#heartbeat_destination_port1 = 9694
+#heartbeat_device1 = ''
+
+# -- query mode --
+
+wd_life_point = 3
+ # lifecheck retry times
+ # (change requires restart)
+wd_lifecheck_query = 'SELECT 1'
+ # lifecheck query to pgpool from watchdog
+ # (change requires restart)
+wd_lifecheck_dbname = 'template1'
+ # Database name connected for lifecheck
+ # (change requires restart)
+wd_lifecheck_user = 'nobody'
+ # watchdog user monitoring pgpools in lifecheck
+ # (change requires restart)
+wd_lifecheck_password = ''
+ # Password for watchdog user in lifecheck
+ # (change requires restart)
+
+# - Other pgpool Connection Settings -
+
+#other_pgpool_hostname0 = 'host0'
+ # Host name or IP address to connect to for other pgpool 0
+ # (change requires restart)
+#other_pgpool_port0 = 5432
+ # Port number for othet pgpool 0
+ # (change requires restart)
+#other_wd_port0 = 9000
+ # Port number for othet watchdog 0
+ # (change requires restart)
+#other_pgpool_hostname1 = 'host1'
+#other_pgpool_port1 = 5432
+#other_wd_port1 = 9000
+
+
+#------------------------------------------------------------------------------
+# OTHERS
+#------------------------------------------------------------------------------
+relcache_expire = 0
+ # Life time of relation cache in seconds.
+ # 0 means no cache expiration(the default).
+ # The relation cache is used for cache the
+ # query result against PostgreSQL system
+ # catalog to obtain various information
+ # including table structures or if it's a
+ # temporary table or not. The cache is
+ # maintained in a pgpool child local memory
+ # and being kept as long as it survives.
+ # If someone modify the table by using
+ # ALTER TABLE or some such, the relcache is
+ # not consistent anymore.
+ # For this purpose, cache_expiration
+ # controls the life time of the cache.
+relcache_size = 256
+ # Number of relation cache
+ # entry. If you see frequently:
+ # "pool_search_relcache: cache replacement happend"
+ # in the pgpool log, you might want to increate this number.
+
+check_temp_table = on
+ # If on, enable temporary table check in SELECT statements.
+ # This initiates queries against system catalog of primary/master
+ # thus increases load of master.
+ # If you are absolutely sure that your system never uses temporary tables
+ # and you want to save access to primary/master, you could turn this off.
+ # Default is on.
+
+
+#------------------------------------------------------------------------------
+# ON MEMORY QUERY MEMORY CACHE
+#------------------------------------------------------------------------------
+memory_cache_enabled = off
+ # If on, use the memory cache functionality, off by default
+memqcache_method = 'shmem'
+ # Cache storage method. either 'shmem'(shared memory) or
+ # 'memcached'. 'shmem' by default
+ # (change requires restart)
+memqcache_memcached_host = 'localhost'
+ # Memcached host name or IP address. Mandatory if
+ # memqcache_method = 'memcached'.
+ # Defaults to localhost.
+ # (change requires restart)
+memqcache_memcached_port = 11211
+ # Memcached port number. Mondatory if memqcache_method = 'memcached'.
+ # Defaults to 11211.
+ # (change requires restart)
+memqcache_total_size = 67108864
+ # Total memory size in bytes for storing memory cache.
+ # Mandatory if memqcache_method = 'shmem'.
+ # Defaults to 64MB.
+ # (change requires restart)
+memqcache_max_num_cache = 1000000
+ # Total number of cache entries. Mandatory
+ # if memqcache_method = 'shmem'.
+ # Each cache entry consumes 48 bytes on shared memory.
+ # Defaults to 1,000,000(45.8MB).
+ # (change requires restart)
+memqcache_expire = 0
+ # Memory cache entry life time specified in seconds.
+ # 0 means infinite life time. 0 by default.
+ # (change requires restart)
+memqcache_auto_cache_invalidation = on
+ # If on, invalidation of query cache is triggered by corresponding
+ # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered
+ # by memqcache_expire. on by default.
+ # (change requires restart)
+memqcache_maxcache = 409600
+ # Maximum SELECT result size in bytes.
+ # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
+ # (change requires restart)
+memqcache_cache_block_size = 1048576
+ # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
+ # Defaults to 1MB.
+ # (change requires restart)
+memqcache_oiddir = '/var/log/pgpool/oiddir'
+ # Temporary work directory to record table oids
+ # (change requires restart)
+white_memqcache_table_list = ''
+ # Comma separated list of table names to memcache
+ # that don't write to database
+ # Regexp are accepted
+black_memqcache_table_list = ''
+ # Comma separated list of table names not to memcache
+ # that don't write to database
+ # Regexp are accepted
diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf
new file mode 100644
index 0000000000..d8918409e8
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf
@@ -0,0 +1,67 @@
+# pgpool Client Authentication Configuration File a custom version
+# ===============================================
+#
+# The format rule in this file follows the rules in the PostgreSQL
+# Administrator's Guide. Refer to chapter "Client Authentication" for a
+# complete description. A short synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which user names they can use, which databases they
+# can access. Records take one of these forms:
+#
+# local DATABASE USER METHOD [OPTION]
+# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", a database name, or a comma-separated
+# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf
+# file is not supported, since pgpool does not know which group a user
+# belongs to. Also note that the database specified here may not exist in
+# the backend PostgreSQL. pgpool will authenticate based on the database's
+# name, not based on whether it exists or not.
+#
+# USER can be "all", a user name, or a comma-separated list thereof. In
+# both the DATABASE and USER fields you can also write a file name prefixed
+# with "@" to include names from a separate file. Note that a group name
+# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported
+# because of the same reason as "samegroup" token. Also note that a user
+# name specified here may not exist in the backend PostgreSQL. pgpool will
+# authenticate based on the user's name, not based on whether he/she exists.
+#
+# CIDR-ADDRESS specifies the set of hosts the record matches.
+# It is made up of an IP address and a CIDR mask that is an integer
+# (between 0 and 32 (IPv4) that specifies the number of significant bits in
+# the mask. Alternatively, you can write an IP address and netmask in
+# separate columns to specify the set of hosts.
+#
+# METHOD can be "trust", "reject", "md5" or "pam". Note that "pam" sends passwords
+# in clear text.
+#
+# OPTION is the name of the PAM service. Default service name is "pgpool"
+#
+# Database and user names containing spaces, commas, quotes and other special
+# characters must be quoted. Quoting one of the keywords "all" or "sameuser"
+# makes the name lose its special character, and just match a database or
+# username with that name.
+#
+# This file is read on pgpool startup. If you edit the file on a running
+# system, you have to restart the pgpool for the changes to take effect.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make pgpool listen
+# on a non-local interface via the listen_addresses configuration parameter.
+#
+
+# TYPE DATABASE USER CIDR-ADDRESS METHOD
+
+# "local" is for Unix domain socket connections only
+#local all all trust
+# IPv4 local connections:
+host all all 0.0.0.0/0 md5
diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pool_passwd b/kubernetes/common/postgres/charts/pgpool/configs/pool_passwd
new file mode 100644
index 0000000000..3636d1de74
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/configs/pool_passwd
@@ -0,0 +1,2 @@
+testuser:md599e8713364988502fa6189781bcf648f
+postgres:md53175bce1d3201d16594cebf9d7eb3f9d
diff --git a/kubernetes/common/postgres/charts/pgpool/requirements.yaml b/kubernetes/common/postgres/charts/pgpool/requirements.yaml
new file mode 100644
index 0000000000..9f44c6df28
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/requirements.yaml
@@ -0,0 +1,18 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+ - name: common
+ version: ~3.0.0
+ repository: '@local'
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml b/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml
new file mode 100755
index 0000000000..10ebd7fd7f
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml
@@ -0,0 +1,26 @@
+# Copyright © 2017 Amdocs, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+ name: {{ .Release.Name }}-pgpool-configmap
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "configs/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml b/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml
new file mode 100644
index 0000000000..a05bed4b5f
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml
@@ -0,0 +1,68 @@
+{{/*
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# # http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+*/}}
+kind: Deployment
+apiVersion: extensions/v1beta1
+metadata:
+ name: {{ include "common.fullname" . }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+spec:
+ replicas: 2
+ template:
+ metadata:
+ labels:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
+ spec:
+ containers:
+ - image: "{{.Values.repository}}/{{.Values.image}}"
+ imagePullPolicy: {{ .Values.pullPolicy | default .Values.global.pullPolicy }}
+ name: {{ include "common.name" . }}
+ env:
+ - name: PG_PRIMARY_SERVICE_NAME
+ value: {{.Values.container.name.primary}}
+ - name: PG_REPLICA_SERVICE_NAME
+ value: {{.Values.container.name.replica}}
+ - name: PG_USERNAME
+ value: {{.Values.credentials.pgusername}}
+ - name: PG_PASSWORD
+ value: {{.Values.credentials.pgpassword}}
+ ports:
+ - containerPort: 5432
+ name: pgpool
+ protocol: TCP
+ readinessProbe:
+ tcpSocket:
+ port: 5432
+ initialDelaySeconds: 20
+ periodSeconds: 10
+ livenessProbe:
+ tcpSocket:
+ port: 5432
+ initialDelaySeconds: 15
+ periodSeconds: 20
+ volumeMounts:
+ - name: pgpool-pgconf
+ mountPath: /pgconf/pgpoolconfigdir
+ readOnly: false
+ volumes:
+ - name: pgpool-pgconf
+ configMap:
+ name: {{ .Release.Name }}-pgpool-configmap
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/service.yaml b/kubernetes/common/postgres/charts/pgpool/templates/service.yaml
new file mode 100644
index 0000000000..86442a2740
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/templates/service.yaml
@@ -0,0 +1,26 @@
+apiVersion: v1
+kind: Service
+metadata:
+ name: {{ .Values.service.name }}
+ namespace: {{ include "common.namespace" . }}
+ labels:
+ app: {{ include "common.name" . }}
+ chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+ release: {{ .Release.Name }}
+ heritage: {{ .Release.Service }}
+ annotations:
+spec:
+ type: {{ .Values.service.type }}
+ ports:
+ {{if eq .Values.service.type "NodePort" -}}
+ - port: {{ .Values.service.externalPort }}
+ nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+ name: {{ .Values.service.name }}
+ {{- else -}}
+ - port: {{ .Values.service.externalPort }}
+ targetPort: {{ .Values.service.internalPort }}
+ name: {{ .Values.service.name }}
+ {{- end}}
+ selector:
+ app: {{ include "common.name" . }}
+ release: {{ .Release.Name }}
diff --git a/kubernetes/common/postgres/charts/pgpool/values.yaml b/kubernetes/common/postgres/charts/pgpool/values.yaml
new file mode 100644
index 0000000000..cb732b7cd7
--- /dev/null
+++ b/kubernetes/common/postgres/charts/pgpool/values.yaml
@@ -0,0 +1,44 @@
+# Copyright © 2018 Amdocs, AT&T, Bell Canada
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global:
+ nodePortPrefix: 302
+ persistence: {}
+ readinessRepository: oomk8s
+ readinessImage: readiness-check:2.0.0
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+# application image
+repository: crunchydata
+image: crunchy-pgpool:centos7-10.4-2.0.0
+pullPolicy: Always
+
+container:
+ port: 5432
+ name:
+ primary: pgset-primary
+ replica: pgset-replica
+credentials:
+ pgusername: testuser
+ pgpassword: password
+service:
+ name: pgpool
+ type: ClusterIP
+ externalPort: 5432
+ internalPort: 5432