diff options
author | 2020-10-29 12:53:26 -0400 | |
---|---|---|
committer | 2020-10-29 13:17:14 -0400 | |
commit | 91f91bb6181e0f7629f46aa6d8bb3816d1f63108 (patch) | |
tree | c91778d197d993f98d37461bf2e3f96760698426 /testsuites/stability/src/main/resources/generate_performance_report.sh | |
parent | 00be5ecb85483ee9309ac8f87c36f5c223c30b5b (diff) |
correct filename and restructure directories for s3p
move s3p jmx and shell script under resources
remove old jmx files from the previous release
Issue-ID: POLICY-2832
Change-Id: I2c1d4f2137655bc096b402b12625fa4add15ecf5
Signed-off-by: Taka Cho <takamune.cho@att.com>
Diffstat (limited to 'testsuites/stability/src/main/resources/generate_performance_report.sh')
-rwxr-xr-x | testsuites/stability/src/main/resources/generate_performance_report.sh | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/testsuites/stability/src/main/resources/generate_performance_report.sh b/testsuites/stability/src/main/resources/generate_performance_report.sh new file mode 100755 index 000000000..f8745e179 --- /dev/null +++ b/testsuites/stability/src/main/resources/generate_performance_report.sh @@ -0,0 +1,240 @@ +#!/bin/bash + +# Copyright (C) 2020 AT&T. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# The aim of this script is to collect performance metric for policies running in PDP-D. +# +# Pre-requisites: +# +# Run the JMeter Stability test plan on the PDP-D for at least few hours so that enough samples +# are collected and used for performance calculation. +# +# Recommendation: +# Run for 72 hours +# +# How to run: +# 1: Copy this script to drools container +# 2: Pass following parameters to run the script +# - log-dir : the complete directory location of audit.log file. +# - wait : the wait time configured in JMeter test plan. (in Guilin Release is no wait time) +# +# Sample command for running the script: ./generate_performance_report -l /var/log/onap/policy/pdpd -w 500 +# Note: -h or --help can be used to display details about input parameters. +# +# How it works +# The script will parse the audit.log file at the specified location and fetch the running time of each policy. +# Take enough samples and then calculate the average time taken for policies to complete. + +usage() +{ +_msg_="$@" +scriptname=$(basename $0) + +cat<<-EOF + +Command Arguments: + +-l, --log-dir + Mandatory argument. Directory location of audit logs. + +-w, --wait + Mandatory argument. Wait time between onset and appc for vCPE and vFW (in milliseconds) + +-h, --help + Optional argument. Display this usage. + +EOF +exit 1 + +} + +process_vCPE_FAIL() { + # vCPE use case + vcpe0_perf_list=($(ls -lrth $LOG_DIR/audit.* | awk '{print $9}'| xargs -n1 zgrep ControlLoop-vCPE-Fail | grep "FINAL.FAILURE.ACCEPTED" | awk -F'|' '{print $7 }'| tail -200000)) + + vcpe0Total=0 + vcpe0Sum=0 + vcpe0Max=0 + vcpe0Min=10000 + for count in "${vcpe0_perf_list[@]}" + do + if [ "$count" -gt "$vcpe0Max" ]; then + vcpe0Max=$count + fi + if [ "$count" -lt "$vcpe0Min" ]; then + vcpe0Min=$count + fi + vcpe0Sum=$(($vcpe0Sum + $count)) + vcpe0Total=$(($vcpe0Total + 1)) + done + # Multiplying by 2 because stability test waits after onset and abatement + average=$((($vcpe0Sum / $vcpe0Total)-(2*$WAIT))) + echo "vCPE Failure cuse case ==> Max: $vcpe0Max, Min: $vcpe0Min, Average: $average ms [samples taken for average: $vcpe0Total]" +} + +process_vCPE_OK() { + # vCPE use case + vcpe_perf_list=($(ls -lrth $LOG_DIR/audit.* | awk '{print $9}'| xargs -n1 zgrep ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e | grep COMPLETE | grep FINAL | awk -F'|' '{print $7 }' | tail -200000)) + + vcpeTotal=0 + vcpeSum=0 + vcpeMax=0 + vcpeMin=10000 + for count in "${vcpe_perf_list[@]}" + do + if [ "$count" -gt "$vcpeMax" ]; then + vcpeMax=$count + fi + if [ "$count" -lt "$vcpeMin" ]; then + vcpeMin=$count + fi + vcpeSum=$(($vcpeSum + $count)) + vcpeTotal=$(($vcpeTotal + 1)) + done + # Multiplying by 2 because stability test waits after onset and abatement + average=$((($vcpeSum / $vcpeTotal)-(2*$WAIT))) + echo "vCPE Success cuse case ==> Max: $vcpeMax, Min: $vcpeMin, Average: $average ms [samples taken for average: $vcpeTotal]" +} + +process_vFW() { + # vFirewall use case + vfw_perf_list=($(ls -lrth $LOG_DIR/audit.* | awk '{print $9}'| xargs -n1 zgrep ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a | grep COMPLETE | grep FINAL | awk -F'|' '{print $7 }' | tail -200000)) + + vfwTotal=0 + vfwSum=0 + vfwMax=0 + vfwMin=10000 + for count in "${vfw_perf_list[@]}" + do + if [ "$count" -gt "$vfwMax" ]; then + vfwMax=$count + fi + if [ "$count" -lt "$vfwMin" ]; then + vfwMin=$count + fi + vfwSum=$(($vfwSum + $count)) + vfwTotal=$(($vfwTotal + 1)) + done + # Substracting wait as stability test waits after onset + average=$((($vfwSum / $vfwTotal)-$WAIT)) + echo "vFirewall Success use case => Max: $vfwMax, Min: $vfwMin, Average: $average ms [samples taken for average: $vfwTotal]" +} + +process_vDNS_OK() { + # vDNS use case + vdns_perf_list=($(ls -lrth $LOG_DIR/audit.* | awk '{print $9}'| xargs -n1 zgrep ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3 | grep COMPLETE | grep FINAL | awk -F'|' '{print $7 }' | tail -200000)) + + vdnsTotal=0 + vdnsSum=0 + vdnsMax=0 + vdnsMin=10000 + for count in "${vdns_perf_list[@]}" + do + if [ "$count" -gt "$vdnsMax" ]; then + vdnsMax=$count + fi + if [ "$count" -lt "$vdnsMin" ]; then + vdnsMin=$count + fi + vdnsSum=$(($vdnsSum + $count)) + vdnsTotal=$(($vdnsTotal + 1)) + done + average=$(($vdnsSum / $vdnsTotal)) + echo "vDNS Success use case => Max: $vdnsMax, Min: $vdnsMin, Average: $average ms [samples taken for average: $vdnsTotal]" +} + +process_vDNS_FAIL() { + # vDNS use case + vdns_perf_list=($(ls -lrth $LOG_DIR/audit.* | awk '{print $9}'| xargs -n1 zgrep ControlLoop-vDNS-Fail | grep "failed to execute the next step" | awk -F'|' '{print $7 }' | tail -200000)) + + vdns0Total=0 + vdns0Sum=0 + vdns0Max=0 + vdns0Min=10000 + for count in "${vdns_perf_list[@]}" + do + if [ "$count" -gt "$vdns0Max" ]; then + vdns0Max=$count + fi + if [ "$count" -lt "$vdns0Min" ]; then + vdns0Min=$count + fi + vdns0Sum=$(($vdns0Sum + $count)) + vdns0Total=$(($vdns0Total + 1)) + done + average=$(($vdns0Sum / $vdns0Total)) + echo "vDNS Failure use case => Max: $vdns0Max, Min: $vdns0Min, Average: $average ms [samples taken for average: $vdns0Total]" +} + +# Called when script is executed with invalid arguments +invalid_arguments() { +echo "Missing or invalid option(s):" +echo "$@" +echo "Try -help for more information" + exit 1 +} + +# Process the arguments passed to the script +process_arguments() { +short_args="hl:w:" +long_args="help,log-dir:wait:" + +args=$(getopt -o $short_args -l $long_args -n "$0" -- "$@" 2>&1 ) +[[ $? -ne 0 ]] && invalid_arguments $( echo " $args"| head -1 ) +[[ $# -eq 0 ]] && invalid_arguments "No options provided" +eval set -- "$args" +cmd_arg="$0" + +while true; do + case "$1" in + -l|--log-dir) + LOG_DIR=$2 + shift 2 ;; + -w|--wait) + WAIT=$2 + shift 2 ;; + -h|--help) + usage + exit 0 + ;; + --) + shift + break ;; + *) + echo BAD ARGUMENTS # perhaps error + break ;; + esac +done + +if ! [[ -d $LOG_DIR ]]; then + echo "$LOG_DIR does not exists" >&2; exit 1 +fi + +re='^[0-9]+$' +if ! [[ $WAIT =~ $re ]] ; then + echo "error: WAIT must be number " >&2; exit 1 +fi + +} + + +# main body +process_arguments $@ +process_vCPE_OK +process_vCPE_FAIL +process_vDNS_OK +process_vDNS_FAIL +process_vFW + |