diff options
Diffstat (limited to 'policy-drools/docker-install.sh')
| -rw-r--r-- | policy-drools/docker-install.sh | 910 |
1 files changed, 0 insertions, 910 deletions
diff --git a/policy-drools/docker-install.sh b/policy-drools/docker-install.sh deleted file mode 100644 index e65329da..00000000 --- a/policy-drools/docker-install.sh +++ /dev/null @@ -1,910 +0,0 @@ -#!/bin/bash - -### -# ============LICENSE_START======================================================= -# Installation Package -# ================================================================================ -# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved. -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= -### - - -function JAVA_HOME() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ -z ${JAVA_HOME} ]]; then - echo "error: aborting installation: JAVA_HOME variable must be present in base.conf" - exit 1; - fi - - echo "JAVA_HOME is ${JAVA_HOME}" -} - -function POLICY_HOME() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local POLICY_HOME_ABS - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting installation: the installation directory POLICY_HOME must be set" - exit 1 - fi - - POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}") - if [[ -n ${POLICY_HOME_ABS} ]]; then - export POLICY_HOME=${POLICY_HOME_ABS} - fi - - echo "POLICY_HOME is ${POLICY_HOME}" - - # Do not allow installations from within POLICY_HOME dir or sub-dirs - if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then - echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. " - exit 1 - fi -} - -function check_java() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local TARGET_JAVA_VERSION INSTALLED_JAVA_VERSION - - TARGET_JAVA_VERSION=$1 - - if [[ -z ${JAVA_HOME} ]]; then - echo "error: ${JAVA_HOME} is not set" - return 1 - fi - - if ! check_x_file "${JAVA_HOME}/bin/java"; then - echo "error: ${JAVA_HOME}/bin/java is not accessible" - return 1 - fi - - INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}') - if [[ -z $INSTALLED_JAVA_VERSION ]]; then - echo "error: ${JAVA_HOME}/bin/java is invalid" - return 1 - fi - - if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then - echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\ - "march desired version ${TARGET_JAVA_VERSION}" - return 1 - fi - - echo "OK: java ${INSTALLED_JAVA_VERSION} installed" - - if ! type -p "${JAVA_HOME}/bin/keytool" > /dev/null 2>&1; then - echo "error: {JAVA_HOME}/bin/keytool is not installed" - return 1 - fi -} - -function process_configuration() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE name value - - CONF_FILE=$1 - while read line || [ -n "${line}" ]; do - if [[ -n ${line} ]] && [[ ${line} != *#* ]]; then - name=$(echo "${line%%=*}") - value=$(echo "${line#*=}") - # escape ampersand so that sed does not replace it with the search string - value=${value//&/\\&} - if [[ -z ${name} ]] || [[ -z $value ]]; then - echo "WARNING: ${line} missing name or value" - fi - export ${name}="${value}" - eval "${name}" "${value}" 2> /dev/null - fi - done < "${CONF_FILE}" - return 0 -} - -function component_preinstall() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \ - -e 's!${{FQDN}}!'"${FQDN}!g" \ - *.conf > /dev/null 2>&1 -} - -function configure_component() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE COMPONENT_ROOT_DIR SED_LINE SED_FILES name value - - CONF_FILE=$1 - COMPONENT_ROOT_DIR=$2 - - SED_LINE="sed -i" - SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' " - SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' " - SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' " - SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' " - SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' " - - while read line || [ -n "${line}" ]; do - if [[ -n ${line} ]] && [[ ${line:0:1} != \# ]]; then - name=$(echo "${line%%=*}") - value=$(echo "${line#*=}") - # escape ampersand so that sed does not replace it with the search string - value=$(echo "${value}" | sed -e 's/[\/&]/\\&/g') - if [[ -z ${name} ]] || [[ -z ${value} ]]; then - echo "WARNING: ${line} missing name or value" - fi - SED_LINE+=" -e 's/\${{${name}}}/${value}/g' " - fi - done < "$CONF_FILE" - - SED_FILES="" - for sed_file in $(find "${COMPONENT_ROOT_DIR}" -type f -exec grep -Iq . {} \; -print 2> /dev/null); do - if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then - SED_FILES+="${sed_file} " - fi - done - - if [[ -z ${SED_FILES} ]]; then - echo "WARNING: no files to perform variable expansion" - else - SED_LINE+=${SED_FILES} - eval "${SED_LINE}" - fi -} - -function configure_settings() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - # The goal is to have repositories for both 'release' and 'snapshot' - # artifacts. These may either be remote (e.g. Nexus) repositories, or - # a local file-based repository. - local fileRepoID=file-repository - local fileRepoUrl=file:$HOME_M2/file-repository - mkdir -p "${fileRepoUrl#file:}" - - # The following parameters are also used outside of this function. - # if snapshotRepositoryUrl and/or releaseRepositoryUrl is defined, - # the corresponding ID and url will be updated below - releaseRepoID=${fileRepoID} - releaseRepoUrl=${fileRepoUrl} - snapshotRepoID=${fileRepoID} - snapshotRepoUrl=${fileRepoUrl} - - # if both snapshotRepositoryUrl and releaseRepositoryUrl are null, - # use standalone-settings.xml that just defines the file-based repo. - # if only one of them is specified, use file-based repo for the other. - if [[ -z "$snapshotRepositoryUrl" && -z $releaseRepositoryUrl ]]; then - echo "snapshotRepositoryUrl and releaseRepositoryUrl properties not set, configuring settings.xml for standalone operation" - mv $HOME_M2/standalone-settings.xml $HOME_M2/settings.xml - else - rm $HOME_M2/standalone-settings.xml - - if [[ -n "${snapshotRepositoryUrl}" ]] ; then - snapshotRepoID=${snapshotRepositoryID} - snapshotRepoUrl=${snapshotRepositoryUrl} - fi - if [[ -n "${releaseRepositoryUrl}" ]] ; then - releaseRepoID=${releaseRepositoryID} - releaseRepoUrl=${releaseRepositoryUrl} - fi - fi - - SED_LINE="sed -i" - SED_LINE+=" -e 's!\${{snapshotRepositoryID}}!${snapshotRepoID}!g' " - SED_LINE+=" -e 's!\${{snapshotRepositoryUrl}}!${snapshotRepoUrl}!g' " - SED_LINE+=" -e 's!\${{releaseRepositoryID}}!${releaseRepoID}!g' " - SED_LINE+=" -e 's!\${{releaseRepositoryUrl}}!${releaseRepoUrl}!g' " - SED_LINE+=" -e 's!\${{repositoryUsername}}!${repositoryUsername}!g' " - SED_LINE+=" -e 's!\${{repositoryPassword}}!${repositoryPassword}!g' " - SED_LINE+=" -e 's!\${{fileRepoID}}!${fileRepoID}!g' " - SED_LINE+=" -e 's!\${{fileRepoUrl}}!${fileRepoUrl}!g' " - - SED_LINE+="$HOME_M2/settings.xml" - eval "${SED_LINE}" - -} - - -function check_r_file() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - FILE=$1 - if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then - return 1 - fi - - return 0 -} - -function check_x_file() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - FILE=$1 - if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then - return 1 - fi - - return 0 -} - -function install_prereqs() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE HOME_OWNER - - CONF_FILE=$1 - - if ! check_r_file "${CONF_FILE}"; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible" - exit 1 - fi - - if ! process_configuration "${CONF_FILE}"; then - echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}" - exit 1 - fi - - if ! check_java "1.8"; then - echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version" - exit 1 - fi - - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set" - exit 1 - fi - - HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}') - if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory" - exit 1 - fi - - echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} " - echo "ownership with umask $(umask)." -} - -function configure_base() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local BASH_PROFILE_LINE PROFILE_LINE - - # check if fqdn is set in base.conf and use that value if set - if [[ -z ${INSTALL_FQDN} ]] - then - echo "FQDN not set in config...using the default FQDN ${FQDN}" - else - echo "Using FQDN ${INSTALL_FQDN} from config" - FQDN=${INSTALL_FQDN} - fi - - configure_component "${BASE_CONF}" "${POLICY_HOME}" - - configure_settings - - BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" - PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" - - # Note: adding to .bashrc instead of .bash_profile - if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then - echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bashrc" - fi - - if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then - echo "${PROFILE_LINE}" >> "${HOME}/.profile" - fi - - . "${POLICY_HOME}/etc/profile.d/env.sh" - - cat "${POLICY_HOME}"/etc/cron.d/* | crontab -} - -function install_base() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local POLICY_HOME_CONTENTS BASE_TGZ BASEX_TGZ BASH_PROFILE_LINE - - install_prereqs "${BASE_CONF}" - - # following properties must be set: - # POLICY_HOME - installation directory, must exist and be writable - - # test that all required properties are set - for var in POLICY_HOME JAVA_HOME - do - if [[ -z $(eval echo \$$var) ]]; then - echo "ERROR: $var must be set in $BASE_CONF" - exit 1 - fi - done - - if [[ ! ( -d "$POLICY_HOME" && -w "$POLICY_HOME" ) ]]; then - echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable" - exit 1 - fi - - if ! /bin/rm -fr "${POLICY_HOME}"/* > /dev/null 2>&1; then - echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files" - exit 1 - fi - - POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null) - if [[ -n ${POLICY_HOME_CONTENTS} ]]; then - echo "error: aborting base installation: ${POLICY_HOME} directory is not empty" - exit 1 - fi - - if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then - echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/" - exit 1 - fi - - BASE_TGZ=$(ls base-*.tar.gz) - if [ ! -r ${BASE_TGZ} ]; then - echo "error: aborting: base package is not accessible" - exit 1 - fi - - tar -tzf ${BASE_TGZ} > /dev/null 2>&1 - if [[ $? != 0 ]]; then - echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}" - exit 1 - fi - - BASEX_TGZ=$(ls basex-*.tar.gz 2> /dev/null) - if [ -z ${BASEX_TGZ} ]; then - echo "warning: no basex application package present" - BASEX_TGZ= - else - tar -tzf ${BASEX_TGZ} > /dev/null 2>&1 - if [[ $? != 0 ]]; then - echo >&2 "warning: invalid basex application package tar file: ${BASEX_TGZ}" - BASEX_TGZ= - fi - fi - - # Undo any changes in the $HOME directory if any - - BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" -# PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" - - # Note: using .bashrc instead of .bash_profile - if [[ -f ${HOME}/.bashrc ]]; then - /bin/sed -i.bak "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc" - fi - -# if [[ -f ${HOME}/.profile ]]; then -# /bin/sed -i.bak "\:${PROFILE_LINE}:d" "${HOME}/.profile" -# fi - - tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner - if [[ $? != 0 ]]; then - # this should not happened - echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}" - exit 1 - fi - - if [ ! -z ${BASEX_TGZ} ]; then - tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner - if [[ $? != 0 ]]; then - # this should not happened - echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}" - fi - fi - -# /bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1 -# /bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1 -# /bin/mkdir -p ${POLICY_HOME}/nagios/tmp > /dev/null 2>&1 -# /bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1 -# /bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1 - -# chmod -R 755 ${POLICY_HOME}/nagios > /dev/null 2>&1 - - if [[ -d $HOME_M2 ]]; then - echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP" - mv $HOME_M2 $HOME/m2.$TIMESTAMP - if [[ $? != 0 ]]; then - echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory" - fi - fi - if [[ ! -d $HOME_M2 ]]; then - echo "Moving m2 directory to $HOME_M2" - mv $POLICY_HOME/m2 $HOME_M2 - if [[ $? != 0 ]]; then - echo "ERROR: Error in moving m2 directory" - exit 1 - fi - fi - - configure_base - - # save ${BASE_CONF} in PDP-D installation - cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d - -# if ! create_keystore; then -# echo "error: aborting base installation: creating keystore" -# exit 1 -# fi - -# list_unexpanded_files ${POLICY_HOME} - -} - -function install_controller() -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ -f "${HOME}/.bashrc" ]]; then - source "${HOME}/.bashrc" - fi - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting installation: POLICY_HOME environment variable is not set." - exit 1 - fi - - if ! check_r_file ${POLICY_HOME}/etc/profile.d/env.sh; then - echo "error: aborting installation: ${POLICY_HOME}/etc/profile.d/env.sh is not accessible" - exit 1 - fi - - local CONTROLLER_CONF CONTROLLER_ZIP RULES_JAR SOURCE_DIR CONTROLLER_DIR AAAA BBBB PORT UTOPIC ARTIFACT_VERSION - - CONTROLLER_CONF=$COMPONENT_TYPE.conf - install_prereqs "${CONTROLLER_CONF}" - - # following properties must be set in conf file: - # CONTROLLER_ARTIFACT_ID - Maven artifactId for controller - # CONTROLLER_NAME - directory name for the controller; controller will be installed to - # $POLICY_HOME/controllers/$CONTROLLER_NAME - # CONTROLLER_PORT - port number for the controller REST interface - # RULES_ARTIFACT - rules artifact specifier: groupId:artifactId:version - - # test that all required properties are set - for var in CONTROLLER_ARTIFACT_ID CONTROLLER_NAME CONTROLLER_PORT RULES_ARTIFACT UEB_TOPIC - do - if [[ -z $(eval echo \$$var) ]]; then - echo "ERROR: $var must be set in $CONTROLLER_CONF" - exit 1 - fi - done - - CONTROLLER_ZIP=$(ls $CONTROLLER_ARTIFACT_ID*.zip 2>&-) - if [[ -z $CONTROLLER_ZIP ]]; then - echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)" - exit 1 - fi - - if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then - echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters" - exit 1 - fi - - if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then - echo "ERROR: CONTROLLER_PORT is not a valid integer" - exit 1 - fi - - # split artifact string into parts - IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT - if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then - echo "ERROR: Invalid setting for RULES_ARTIFACT property" - exit 1 - fi - - #RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar - RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar) - if ! check_r_file $RULES_JAR; then - echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually" - RULES_JAR= - fi - - - SOURCE_DIR=$PWD - CONTROLLER_DIR=$POLICY_HOME - - cd $CONTROLLER_DIR - - echo "Unpacking controller zip file" - # use jar command in case unzip not present on system - jar xf $SOURCE_DIR/$CONTROLLER_ZIP - if [[ $? != 0 ]]; then - echo "ERROR: unpack of controller zip file failed, install aborted" - exit 1 - fi - - chmod +x bin/* - - # Perform base variable replacement in controller config file - configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}" - - # Perform variable replacements in config files. - # config files may contain the following strings that need to be replaced with - # real values: - # AAAA - artifactId - # BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-") - # PORT - Port number for REST server - - echo "Performing variable replacement in config files" - AAAA=$CONTROLLER_ARTIFACT_ID - BBBB=${AAAA#[a-z]*-} - PORT=$CONTROLLER_PORT - UTOPIC=${UEB_TOPIC} - - for file in config/* - do - sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file - if [[ $? != 0 ]]; then - echo "ERROR: variable replacement failed for file $file, install aborted" - exit 1 - fi - done - - # append properties for rules artifact to server properties - cat >>config/server.properties <<EOF - -rules.groupId=$RULES_GROUPID -rules.artifactId=$RULES_ARTIFACTID -rules.version=$RULES_VERSION -EOF - - # TODO: run pw.sh script to set passwords - - # return to directory where we started - cd $SOURCE_DIR - - # install rules jar into repository if present - if [[ -n $RULES_JAR ]]; then - # can't use RULES_VERSION because may be set to "LATEST", - # so extract version from the jar filename - ARTIFACT_VERSION=$(sed -e "s/${RULES_ARTIFACTID}-//" -e "s/\.jar//" <<<${RULES_JAR}) - if [[ -n $repositoryUrl ]]; then - echo "Deploying rules artifact to Policy Repository" - mvn deploy:deploy-file -Dfile=$RULES_JAR \ - -DgroupId=$RULES_GROUPID -DartifactId=$RULES_ARTIFACTID -Dversion=$ARTIFACT_VERSION \ - -DrepositoryId=${repositoryID} -Durl=${repositoryUrl} \ - -DgeneratePom=true -DupdateReleaseInfo=true - else - echo "Installing rules artifact into local .m2 repository" - mvn --offline org.apache.maven.plugins:maven-install-plugin:2.5.2:install-file \ - -Dfile=$RULES_JAR -DgeneratePom=true -DupdateReleaseInfo=true - fi - fi - - update_monitor $CONTROLLER_NAME - - # save install configuration as an environment file - ln -s -f "${POLICY_HOME}/etc/profile.d/${BASE_CONF}" "${POLICY_HOME}/config/${BASE_CONF}.environment" -} - - -function update_monitor() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local NAME lastline - - NAME=$1 - - if [[ -f ${POLICY_HOME}/etc/monitor/monitor.cfg ]]; then - if grep -q "^${NAME}=" ${POLICY_HOME}/etc/monitor/monitor.cfg; then - echo "OK: updating monitoring entry for ${NAME}" - /bin/sed -i.bak \ - -e "s/^${NAME}=.*/${NAME}=off/g" \ - ${POLICY_HOME}/etc/monitor/monitor.cfg - else - # make sure file ends with newline - lastline=$(tail -n 1 ${POLICY_HOME}/etc/monitor/monitor.cfg; echo x) - lastline=${lastline%x} - if [ "${lastline: -1}" = $'\n' ]; then - echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg" - else - echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg (with newline)" - echo "" >> ${POLICY_HOME}/etc/monitor/monitor.cfg - fi - - - echo "${NAME}=off" >> ${POLICY_HOME}/etc/monitor/monitor.cfg - fi - else - echo "WARNING: ${POLICY_HOME}/etc/monitor/monitor.cfg does not exist. No monitoring enabled." - fi -} - -# Usage: getPomAttributes <pom-file> <attribute> ... -# -# This function performs simplistic parsing of a 'pom.xml' file, extracting -# the specified attributes (e.g. 'groupId', 'artifactId', 'version'). The -# attributes are returned as environment variables with the associated name. - -function getPomAttributes -{ - local tab=$'\t' - local rval=0 - local file="$1" - local attr - local value - shift - for attr in "$@" ; do - # Try to fetch the parameter associated with the 'pom.xml' file. - # Initially, the 'parent' element is excluded. If the desired - # parameter is not found, the 'parent' element is included in the - # second attempt. - value=$(sed -n \ - -e '/<parent>/,/<\/parent>/d' \ - -e '/<dependencies>/,/<\/dependencies>/d' \ - -e '/<build>/,/<\/build>/d' \ - -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ - <"${file}") - - if [[ "${value}" == "" ]] ; then - # need to check parent for parameter - value=$(sed -n \ - -e '/<dependencies>/,/<\/dependencies>/d' \ - -e '/<build>/,/<\/build>/d' \ - -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ - <"${file}") - if [[ "${value}" == "" ]] ; then - echo "${file}: Can't determine ${attr}" >&2 - rval=1 - fi - fi - # the following sets an environment variable with the name referred - # to by ${attr} - read ${attr} <<<"${value}" - done - return ${rval} -} - - -# Usage: installPom <pom-file> -# -# This function installs a 'pom.xml' file in the local repository - -function installPom -{ - # need to extract attributes from POM file - if getPomAttributes "${1}" artifactId groupId version ; then - local repoID repoUrl - if [[ "${version}" =~ SNAPSHOT ]] ; then - repoID=${snapshotRepoID} - repoUrl=${snapshotRepoUrl} - else - repoID=${releaseRepoID} - repoUrl=${releaseRepoUrl} - fi - echo "${1}: Deploying POM artifact to remote repository" - mvn deploy:deploy-file -Dfile="$1" \ - -Dpackaging=pom -DgeneratePom=false \ - -DgroupId=${groupId} \ - -DartifactId=${artifactId} \ - -Dversion=${version} \ - -DrepositoryId=${repoID} -Durl=${repoUrl} \ - -DupdateReleaseInfo=true - else - echo "${1}: Can't install pom due to missing attributes" >&2 - return 1 - fi -} - -# Usage: installJar <jar-file> -# -# This function installs a JAR file in the local repository, as well as -# the 'pom.xml' member it contains. - -function installJar -{ - local dir=$(mktemp -d) - local jar="${1##*/}" - cp -p "${1}" "${dir}/${jar}" - - ( - local rval=0 - cd "${dir}" - # determine name of 'pom' file within JAR - local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1) - if [[ "${pom}" ]] ; then - # extract pom file - jar xf ${jar} "${pom}" - - # determine version from pom file - if getPomAttributes "${pom}" version ; then - local repoID repoUrl - if [[ "${version}" =~ SNAPSHOT ]] ; then - repoID=${snapshotRepoID} - repoUrl=${snapshotRepoUrl} - else - repoID=${releaseRepoID} - repoUrl=${releaseRepoUrl} - fi - echo "${1}: Deploying JAR artifact to remote repository" - mvn deploy:deploy-file \ - -Dfile=${jar} \ - -Dversion=${version} \ - -Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \ - -DrepositoryId=${repoID} -Durl=${repoUrl} \ - -DupdateReleaseInfo=true - else - echo "${1}: Can't determine version from 'pom.xml'" >&2 - rval=1 - fi - else - echo "${1}: Can't find 'pom.xml'" >&2 - rval=1 - fi - rm -rf ${dir} - return ${rval} - ) -} - -# Unzip the 'artifacts-*.zip' file, and install all of the associated -# artifacts into the local repository. - -function installArtifacts -{ - local file - if [[ -f $(echo artifacts-*.zip) ]] ; then - # use jar command in case unzip not present on system - jar xf artifacts-*.zip - for file in artifacts/* ; do - case "${file}" in - *pom.xml|*.pom) installPom "${file}";; - *.jar) installJar "${file}";; - *) echo "${file}: Don't know how to install artifact" >&2;; - esac - done - fi -} - -function installFeatures -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local name featureConf - export FEATURES_HOME="${POLICY_HOME}/${FEATURES_DIR}" - echo "FEATURES_HOME is ${FEATURES_HOME}" - - mkdir -p "${FEATURES_HOME}" > /dev/null 2>&1 - if [[ -d "${FEATURES_HOME}" && -x "${FEATURES_HOME}" ]]; then - SOURCE_DIR=$PWD - for feature in feature-*.zip ; do - name="${feature#feature-}" - name="${name%-[0-9]*\.zip}" - mkdir -p "${FEATURES_HOME}/${name}" > /dev/null 2>&1 - (cd "${FEATURES_HOME}/${name}"; jar xf ${SOURCE_DIR}/${feature}) - featureConf="feature-${name}.conf" - if [[ -r "${featureConf}" ]]; then - configure_component "${featureConf}" "${FEATURES_HOME}" - cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d - echo "feature ${name} has been installed (configuration present)" - else - echo "feature ${name} has been installed (no configuration present)" - fi - done - - echo "applying base configuration to features" - configure_component "${BASE_CONF}" "${FEATURES_HOME}" - else - echo "error: aborting ${FEATURES_HOME} is not accessible" - exit 1 - fi -} - -function do_install() -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - echo "Starting installation at $(date)" - echo - - COMPONENT_TYPE=base - BASE_CONF=base.conf - install_base - component_preinstall - - COMPONENT_TYPE=policy-management - install_controller - - installFeatures - installArtifacts - - - if [[ -f apps-installer ]]; then - # if exists, any customizations to the - # base drools installation from the drools apps - # is executed here - - ./apps-installer - fi - - echo - echo "Installation complete" - echo "Please logoff and login again to update shell environment" - -} - -export POLICY_USER=$(/usr/bin/id -un) -export POLICY_GROUP=$POLICY_USER - -FQDN=$(hostname -f 2> /dev/null) -if [[ $? != 0 || -z ${FQDN} ]]; then - echo "error: cannot determine the FQDN for this host $(hostname)." - exit 1 -fi - -TIMESTAMP=$(date "+%Y%m%d-%H%M%S") -LOGFILE=$PWD/install.log.$TIMESTAMP - -OPERATION=install -BASE_CONF=base.conf -HOME_M2=$HOME/.m2 -FEATURES_DIR="features" - -do_install 2>&1 | tee $LOGFILE |