diff options
Diffstat (limited to 'csit/run-k8s-csit-enable.sh')
| -rwxr-xr-x | csit/run-k8s-csit-enable.sh | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/csit/run-k8s-csit-enable.sh b/csit/run-k8s-csit-enable.sh deleted file mode 100755 index f8c56678..00000000 --- a/csit/run-k8s-csit-enable.sh +++ /dev/null @@ -1,313 +0,0 @@ -#!/bin/bash -# -# ============LICENSE_START==================================================== -# Copyright (C) 2022-2023 Nordix Foundation. -# ============================================================================= -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# SPDX-License-Identifier: Apache-2.0 -# ============LICENSE_END====================================================== - -# This script spins up kubernetes cluster in Microk8s for deploying policy helm charts. -# Runs CSITs in kubernetes. - -if [ -z "${WORKSPACE}" ]; then - WORKSPACE=$(git rev-parse --show-toplevel) - export WORKSPACE -fi - -export GERRIT_BRANCH=$(awk -F= '$1 == "defaultbranch" { print $2 }' "${WORKSPACE}"/.gitreview) - -CSIT_SCRIPT="scripts/run-test.sh" -ROBOT_DOCKER_IMAGE="policy-csit-robot" -POLICY_CLAMP_ROBOT="policy-clamp-test.robot" -POLICY_API_ROBOT="api-test.robot api-slas.robot" -POLICY_PAP_ROBOT="pap-test.robot pap-slas.robot" -POLICY_APEX_PDP_ROBOT="apex-pdp-test.robot apex-slas.robot" -POLICY_XACML_PDP_ROBOT="xacml-pdp-test.robot" -POLICY_DROOLS_PDP_ROBOT="drools-pdp-test.robot" -POLICY_DISTRIBUTION_ROBOT="distribution-test.robot" - -POLICY_API_CONTAINER="policy-api" -POLICY_PAP_CONTAINER="policy-pap" -POLICY_CLAMP_CONTAINER="policy-clamp-runtime-acm" -POLICY_APEX_CONTAINER="policy-apex-pdp" -POLICY_DROOLS_CONTAINER="policy-drools-pdp" -POLICY_XACML_CONTAINER="policy-xacml-pdp" -POLICY_DISTRIBUTION_CONTAINER="policy-distribution" -POLICY_K8S_PPNT_CONTAINER="policy-clamp-ac-k8s-ppnt" -POLICY_HTTP_PPNT_CONTAINER="policy-clamp-ac-http-ppnt" -POLICY_PF_PPNT_CONTAINER="policy-clamp-ac-pf-ppnt" -SET_VALUES="" - -DISTRIBUTION_CSAR=${WORKSPACE}/csit/resources/tests/data/csar -DIST_TEMP_FOLDER=/tmp/distribution - -export PROJECT="" -export ROBOT_FILE="" -export ROBOT_LOG_DIR=${WORKSPACE}/csit/archives -export READINESS_CONTAINERS=() - -function spin_microk8s_cluster() { - echo "Verify if Microk8s cluster is running.." - microk8s version - exitcode="${?}" - - if [ "$exitcode" -ne 0 ]; then - echo "Microk8s cluster not available, Spinning up the cluster.." - sudo snap install microk8s --classic --channel=1.25/stable - - if [ "${?}" -ne 0 ]; then - echo "Failed to install kubernetes cluster. Aborting.." - return 1 - fi - echo "Microk8s cluster installed successfully" - sudo usermod -a -G microk8s $USER - echo "Enabling DNS and helm3 plugins" - sudo microk8s.enable dns helm3 hostpath-storage - echo "Creating configuration file for Microk8s" - sudo mkdir -p $HOME/.kube - sudo chown -R $USER:$USER $HOME/.kube - sudo microk8s kubectl config view --raw >$HOME/.kube/config - sudo chmod 600 $HOME/.kube/config - echo "K8s installation completed" - echo "----------------------------------------" - else - echo "K8s cluster is already running" - echo "----------------------------------------" - return 0 - fi - -} - -function uninstall_policy() { - echo "Removing the policy helm deployment" - sudo microk8s helm uninstall csit-policy - sudo microk8s helm uninstall prometheus - sudo microk8s helm uninstall csit-robot - rm -rf ${WORKSPACE}/helm/policy/Chart.lock - sudo rm -rf /dockerdata-nfs/mariadb-galera/ - echo "Policy deployment deleted" - echo "Clean up docker" - docker image prune -f -} - -function teardown_cluster() { - echo "Removing k8s cluster and k8s configuration file" - sudo snap remove microk8s;rm -rf $HOME/.kube/config - echo "MicroK8s Cluster removed" -} - -function build_robot_image() { - echo "Build docker image for robot framework" - cd ${WORKSPACE}/csit/resources || exit - clone_models - if [ "${PROJECT}" == "distribution" ] || [ "${PROJECT}" == "policy-distribution" ]; then - copy_csar_file - fi - echo "Build robot framework docker image" - docker login -u docker -p docker nexus3.onap.org:10001 - docker build . --file Dockerfile \ - --build-arg CSIT_SCRIPT="$CSIT_SCRIPT" \ - --build-arg ROBOT_FILE="$ROBOT_FILE" \ - --tag "${ROBOT_DOCKER_IMAGE}" --no-cache - echo "---------------------------------------------" -} - -function start_csit() { - build_robot_image - if [ "${?}" -eq 0 ]; then - echo "Importing robot image into microk8s registry" - docker save -o policy-csit-robot.tar ${ROBOT_DOCKER_IMAGE}:latest - sudo microk8s ctr image import policy-csit-robot.tar - rm -rf ${WORKSPACE}/csit/resources/policy-csit-robot.tar - rm -rf ${WORKSPACE}/csit/resources/tests/models/ - echo "---------------------------------------------" - if [ $PROJECT == "clamp" ] || [ $PROJECT == "policy-clamp" ]; then - POD_READY_STATUS="0/1" - while [[ ${POD_READY_STATUS} != "1/1" ]]; do - echo "Waiting for chartmuseum pod to come up..." - sleep 5 - POD_READY_STATUS=$(microk8s kubectl get pods | grep -e "policy-chartmuseum" | awk '{print $2}') - done - push_acelement_chart - fi - echo "Installing Robot framework pod for running CSIT" - cd ${WORKSPACE}/helm - mkdir -p ${ROBOT_LOG_DIR} - sudo microk8s helm install csit-robot robot --set robot="$ROBOT_FILE" --set "readiness={${READINESS_CONTAINERS[*]}}" --set robotLogDir=$ROBOT_LOG_DIR - print_robot_log - teardown_cluster - fi -} - -function print_robot_log() { - count_pods=0 - while [[ ${count_pods} -eq 0 ]]; do - echo "Waiting for pods to come up..." - sleep 5 - count_pods=$(sudo microk8s kubectl get pods --output name | wc -l) - done - sudo microk8s kubectl get po - robotpod=$(sudo microk8s kubectl get po | grep policy-csit) - podName=$(echo "$robotpod" | awk '{print $1}') - echo "The robot tests will begin once the policy components {${READINESS_CONTAINERS[*]}} are up and running..." - sudo microk8s kubectl wait --for=jsonpath='{.status.phase}'=Running --timeout=10m pod/"$podName" - sudo microk8s kubectl logs -f "$podName" - echo "Please check the logs of policy-csit-robot pod for the test execution results" -} - - -function clone_models () { - # download models examples - git clone -b "${GERRIT_BRANCH}" --single-branch https://github.com/onap/policy-models.git "${WORKSPACE}"/csit/resources/tests/models - - # create a couple of variations of the policy definitions - sed -e 's!Measurement_vGMUX!ADifferentValue!' \ - tests/models/models-examples/src/main/resources/policies/vCPE.policy.monitoring.input.tosca.json \ - >tests/models/models-examples/src/main/resources/policies/vCPE.policy.monitoring.input.tosca.v1_2.json - - sed -e 's!"version": "1.0.0"!"version": "2.0.0"!' \ - -e 's!"policy-version": 1!"policy-version": 2!' \ - tests/models/models-examples/src/main/resources/policies/vCPE.policy.monitoring.input.tosca.json \ - >tests/models/models-examples/src/main/resources/policies/vCPE.policy.monitoring.input.tosca.v2.json -} - -function copy_csar_file() { - zip -F ${DISTRIBUTION_CSAR}/sample_csar_with_apex_policy.csar \ - --out ${DISTRIBUTION_CSAR}/csar_temp.csar -q - # Remake temp directory - sudo rm -rf "${DIST_TEMP_FOLDER}" - sudo mkdir "${DIST_TEMP_FOLDER}" - sudo cp ${DISTRIBUTION_CSAR}/csar_temp.csar ${DISTRIBUTION_CSAR}/temp.csar - sudo mv ${DISTRIBUTION_CSAR}/temp.csar ${DIST_TEMP_FOLDER}/sample_csar_with_apex_policy.csar -} - - -function set_project_config() { - echo "Setting project configuration for: $PROJECT" - case $PROJECT in - - clamp | policy-clamp) - export ROBOT_FILE=$POLICY_CLAMP_ROBOT - export READINESS_CONTAINERS=($POLICY_CLAMP_CONTAINER,$POLICY_APEX_CONTAINER,$POLICY_PF_PPNT_CONTAINER,$POLICY_K8S_PPNT_CONTAINER, - $POLICY_HTTP_PPNT_CONTAINER) - export SET_VALUES="--set $POLICY_CLAMP_CONTAINER.enabled=true --set $POLICY_APEX_CONTAINER.enabled=true - --set $POLICY_PF_PPNT_CONTAINER.enabled=true --set $POLICY_K8S_PPNT_CONTAINER.enabled=true --set $POLICY_HTTP_PPNT_CONTAINER.enabled=true" - ;; - - api | policy-api) - export ROBOT_FILE=$POLICY_API_ROBOT - export READINESS_CONTAINERS=($POLICY_API_CONTAINER) - ;; - - pap | policy-pap) - export ROBOT_FILE=$POLICY_PAP_ROBOT - export READINESS_CONTAINERS=($POLICY_APEX_CONTAINER,$POLICY_PAP_CONTAINER,$POLICY_API_CONTAINER,$POLICY_DROOLS_CONTAINER, - $POLICY_XACML_CONTAINER) - export SET_VALUES="--set $POLICY_APEX_CONTAINER.enabled=true --set $POLICY_DROOLS_CONTAINER.enabled=true --set $POLICY_XACML_CONTAINER.enabled=true" - ;; - - apex-pdp | policy-apex-pdp) - export ROBOT_FILE=$POLICY_APEX_PDP_ROBOT - export READINESS_CONTAINERS=($POLICY_APEX_CONTAINER,$POLICY_API_CONTAINER,$POLICY_PAP_CONTAINER) - export SET_VALUES="--set $POLICY_APEX_CONTAINER.enabled=true" - ;; - - xacml-pdp | policy-xacml-pdp) - export ROBOT_FILE=($POLICY_XACML_PDP_ROBOT) - export READINESS_CONTAINERS=($POLICY_API_CONTAINER,$POLICY_PAP_CONTAINER,$POLICY_XACML_CONTAINER) - export SET_VALUES="--set $POLICY_XACML_CONTAINER.enabled=true" - ;; - - drools-pdp | policy-drools-pdp) - export ROBOT_FILE=($POLICY_DROOLS_PDP_ROBOT) - export READINESS_CONTAINERS=($POLICY_DROOLS_CONTAINER) - export SET_VALUES="--set $POLICY_DROOLS_CONTAINER.enabled=true" - ;; - - distribution | policy-distribution) - export ROBOT_FILE=($POLICY_DISTRIBUTION_ROBOT) - export READINESS_CONTAINERS=($POLICY_APEX_CONTAINER,$POLICY_API_CONTAINER,$POLICY_PAP_CONTAINER, - $POLICY_DISTRIBUTION_CONTAINER) - export SET_VALUES="--set $POLICY_APEX_CONTAINER.enabled=true --set $POLICY_DISTRIBUTION_CONTAINER.enabled=true" - ;; - - *) - echo "Unknown project supplied. Enabling all policy charts for the deployment" - export SET_VALUES="--set $POLICY_APEX_CONTAINER.enabled=true --set $POLICY_XACML_CONTAINER.enabled=true - --set $POLICY_DISTRIBUTION_CONTAINER.enabled=true --set $POLICY_POLICY_DROOLS_CONTAINER.enabled=true - --set $POLICY_CLAMP_CONTAINER.enabled=true --set $POLICY_PF_PPNT_CONTAINER.enabled=true - --set $POLICY_K8S_PPNT_CONTAINER.enabled=true --set $POLICY_HTTP_PPNT_CONTAINER.enabled=true" - ;; - esac - -} - -function install_chartmuseum () { - echo "Installing Chartmuseum helm repository..." - sudo microk8s helm repo add chartmuseum-git https://chartmuseum.github.io/charts - sudo microk8s helm repo update - sudo microk8s helm install policy-chartmuseum chartmuseum-git/chartmuseum --set env.open.DISABLE_API=false --set service.type=NodePort --set service.nodePort=30208 - sudo microk8s helm plugin install https://github.com/chartmuseum/helm-push -} - -function push_acelement_chart() { - echo "Pushing acelement chart to the chartmuseum repo..." - sudo microk8s helm repo add policy-chartmuseum http://localhost:30208 - - # download clamp repo - git clone -b "${GERRIT_BRANCH}" --single-branch https://github.com/onap/policy-clamp.git "${WORKSPACE}"/csit/resources/tests/clamp - ACELEMENT_CHART=${WORKSPACE}/csit/resources/tests/clamp/examples/src/main/resources/clamp/acm/acelement-helm/acelement - sudo microk8s helm cm-push $ACELEMENT_CHART policy-chartmuseum - sudo microk8s helm repo update - echo "-------------------------------------------" -} - - -OPERATION="$1" -PROJECT="$2" - -if [ $OPERATION == "install" ]; then - spin_microk8s_cluster - if [ "${?}" -eq 0 ]; then - set_project_config - echo "Installing policy helm charts in the default namespace" - cd ${WORKSPACE}/helm || exit - sudo microk8s helm dependency build policy - sudo microk8s helm install csit-policy policy ${SET_VALUES} - sudo microk8s helm install prometheus prometheus - echo "Policy chart installation completed" - echo "-------------------------------------------" - fi - - if [ "$PROJECT" ]; then - export $PROJECT - export ROBOT_LOG_DIR=${WORKSPACE}/csit/archives/${PROJECT} - get_robot_file - echo "CSIT will be invoked from $ROBOT_FILE" - echo "Readiness containers: ${READINESS_CONTAINERS[*]}" - echo "-------------------------------------------" - start_csit - else - echo "No project supplied for running CSIT" - fi - -elif [ $OPERATION == "uninstall" ]; then - uninstall_policy - -elif [ $OPERATION == "clean" ]; then - teardown_cluster -else - echo "Invalid arguments provided. Usage: $0 [option..] {install {project} | uninstall} | {clean}" -fi |