aboutsummaryrefslogtreecommitdiffstats
path: root/config
diff options
context:
space:
mode:
Diffstat (limited to 'config')
-rw-r--r--config/pe/ClosedLoopControlName.drl1227
-rw-r--r--config/pe/push-policies.sh217
2 files changed, 1376 insertions, 68 deletions
diff --git a/config/pe/ClosedLoopControlName.drl b/config/pe/ClosedLoopControlName.drl
new file mode 100644
index 00000000..c1af5cb1
--- /dev/null
+++ b/config/pe/ClosedLoopControlName.drl
@@ -0,0 +1,1227 @@
+/*-
+ * ============LICENSE_START=======================================================
+ * ONAP
+ * ================================================================================
+ * Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+ * ================================================================================
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ * ============LICENSE_END=========================================================
+ */
+
+package org.onap.policy.controlloop;
+
+import org.onap.policy.controlloop.VirtualControlLoopEvent;
+import org.onap.policy.controlloop.VirtualControlLoopNotification;
+import org.onap.policy.controlloop.ControlLoopEventStatus;
+import org.onap.policy.controlloop.ControlLoopNotificationType;
+import org.onap.policy.controlloop.ControlLoopLogger;
+import org.onap.policy.controlloop.policy.PolicyResult;
+import org.onap.policy.controlloop.policy.ControlLoopPolicy;
+import org.onap.policy.controlloop.policy.Policy;
+import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager;
+import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager.NEW_EVENT_STATUS;
+import org.onap.policy.controlloop.eventmanager.ControlLoopOperationManager;
+import org.onap.policy.controlloop.actor.so.SOActorServiceProvider;
+import org.onap.policy.appc.Request;
+import org.onap.policy.appc.Response;
+import org.onap.policy.appc.CommonHeader;
+import org.onap.policy.appclcm.LCMRequestWrapper;
+import org.onap.policy.appclcm.LCMResponseWrapper;
+import org.onap.policy.appclcm.LCMRequest;
+import org.onap.policy.appclcm.LCMResponse;
+import org.onap.policy.appclcm.LCMCommonHeader;
+import org.onap.policy.vfc.VFCRequest;
+import org.onap.policy.vfc.VFCResponse;
+import org.onap.policy.vfc.VFCManager;
+import org.onap.policy.so.SOManager;
+import org.onap.policy.so.SORequest;
+import org.onap.policy.so.SORequestStatus;
+import org.onap.policy.so.SORequestDetails;
+import org.onap.policy.so.SOModelInfo;
+import org.onap.policy.so.SOCloudConfiguration;
+import org.onap.policy.so.SORequestInfo;
+import org.onap.policy.so.SORequestParameters;
+import org.onap.policy.so.SORelatedInstanceListElement;
+import org.onap.policy.so.SORelatedInstance;
+import org.onap.policy.so.SOResponse;
+import org.onap.policy.guard.PolicyGuard;
+import org.onap.policy.guard.PolicyGuard.LockResult;
+import org.onap.policy.guard.TargetLock;
+import org.onap.policy.guard.GuardResult;
+import org.onap.policy.guard.PolicyGuardRequest;
+import org.onap.policy.guard.PolicyGuardResponse;
+import org.onap.policy.guard.PolicyGuardXacmlRequestAttributes;
+import org.onap.policy.guard.PolicyGuardXacmlHelper;
+
+import org.yaml.snakeyaml.Yaml;
+import org.yaml.snakeyaml.constructor.Constructor;
+
+import org.slf4j.LoggerFactory;
+import org.slf4j.Logger;
+
+import java.time.Instant;
+import java.util.LinkedList;
+import java.util.Iterator;
+
+import org.onap.policy.drools.system.PolicyEngine;
+
+declare Params
+ closedLoopControlName : String
+ controlLoopYaml : String
+end
+
+
+declare OperationTimer
+ closedLoopControlName : String
+ requestID : String
+ delay : String
+end
+
+declare ControlLoopTimer
+ closedLoopControlName : String
+ requestID : String
+ delay : String
+end
+
+/*
+*
+* Called once and only once to insert the parameters into working memory for this Closed Loop policy.
+*
+*/
+rule "${policyName}.SETUP"
+ when
+ then
+
+ Params params = new Params();
+ params.setClosedLoopControlName("${closedLoopControlName}");
+ params.setControlLoopYaml("${controlLoopYaml}");
+ insert(params);
+
+ // Note: globals have bad behavior when persistence is used,
+ // hence explicitly getting the logger vs using a global
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {} : YAML=[{}]", params.getClosedLoopControlName(), drools.getRule().getName(), params.getControlLoopYaml());
+
+ String sqlDbUsername = PolicyEngine.manager.getEnvironmentProperty("sql.db.username");
+ String sqlDbPassword = PolicyEngine.manager.getEnvironmentProperty("sql.db.password");
+
+ String aaiUrl = PolicyEngine.manager.getEnvironmentProperty("aai.url");
+ String aaiUsername = PolicyEngine.manager.getEnvironmentProperty("aai.username");
+ String aaiPassword = PolicyEngine.manager.getEnvironmentProperty("aai.password");
+
+ String soUrl =PolicyEngine.manager.getEnvironmentProperty("so.url");
+ String soUsername = PolicyEngine.manager.getEnvironmentProperty("so.username");
+ String soPassword = PolicyEngine.manager.getEnvironmentProperty("so.password");
+
+ String vfcUrl =PolicyEngine.manager.getEnvironmentProperty("vfc.url");
+ String vfcUsername = PolicyEngine.manager.getEnvironmentProperty("vfc.username");
+ String vfcPassword = PolicyEngine.manager.getEnvironmentProperty("vfc.password");
+
+ String guardUrl = PolicyEngine.manager.getEnvironmentProperty("guard.url");
+ String guardUsername = PolicyEngine.manager.getEnvironmentProperty("guard.username");
+ String guardPassword = PolicyEngine.manager.getEnvironmentProperty("guard.password");
+ String guardJdbcUrl = PolicyEngine.manager.getEnvironmentProperty("guard.jdbc.url");
+
+ logger.info("{}: {} : AAI=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), aaiUrl, aaiUsername);
+ logger.info("{}: {} : SO=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), soUrl, soUsername);
+ logger.info("{}: {} : VFC=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), vfcUrl, vfcUsername);
+ logger.info("{}: {} : GUARD=[{}:{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), guardUrl, guardUsername, guardJdbcUrl);
+ logger.info("{}: {} : DB=[{}:{}]", params.getClosedLoopControlName(), drools.getRule().getName(), sqlDbUsername, sqlDbPassword);
+end
+
+/*
+*
+* This rule responds to DCAE Events where there is no manager yet. Either it is
+* the first ONSET, or a subsequent badly formed Event (i.e. Syntax error, or is-closed-loop-disabled)
+*
+*/
+rule "${policyName}.EVENT"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ not ( ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID ) )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+
+ try {
+
+ //
+ // Check the event, because we need it to not be null when
+ // we create the ControlLoopEventManager. The ControlLoopEventManager
+ // will do extra syntax checking as well check if the closed loop is disabled.
+ //
+ if ($event.requestID == null) {
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.notification = ControlLoopNotificationType.REJECTED;
+ notification.from = "policy";
+ notification.message = "Missing requestID";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+
+ //
+ // Retract it from memory
+ //
+ retract($event);
+ } else {
+ //
+ // Create an EventManager
+ //
+ ControlLoopEventManager manager = new ControlLoopEventManager($params.getClosedLoopControlName(), $event.requestID);
+ //
+ // Determine if EventManager can actively process the event (i.e. syntax, is_closed_loop_disabled checks etc.)
+ //
+ VirtualControlLoopNotification notification = manager.activate($params.getControlLoopYaml(), $event);
+ notification.from = "pdp-0001-controller=controlloop"; // Engine.getInstanceName()
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ //
+ // Are we actively pursuing this event?
+ //
+ if (notification.notification == ControlLoopNotificationType.ACTIVE) {
+ //
+ // Insert Event Manager into memory, this will now kick off processing.
+ //
+ insert(manager);
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Setup the Overall Control Loop timer
+ //
+ ControlLoopTimer clTimer = new ControlLoopTimer();
+ clTimer.setClosedLoopControlName($event.closedLoopControlName);
+ clTimer.setRequestID($event.requestID.toString());
+ clTimer.setDelay(manager.getControlLoopTimeout(1500) + "s");
+ //
+ // Insert it
+ //
+ insert(clTimer);
+ } else {
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Retract it from memory
+ //
+ retract($event);
+ }
+
+ //
+ // Now that the manager is inserted into Drools working memory, we'll wait for
+ // another rule to fire in order to continue processing. This way we can also
+ // then screen for additional ONSET and ABATED events for this RequestID.
+ //
+ }
+ } catch (Exception e) {
+ logger.warn("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName(), e);
+
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.notification = ControlLoopNotificationType.REJECTED;
+ notification.message = "Exception occurred " + e.getMessage();
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ //
+ //
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Retract the event
+ //
+ retract($event);
+ }
+end
+
+/*
+*
+* This rule happens when we got a valid ONSET, closed loop is enabled and an Event Manager
+* is now created. We can start processing the yaml specification via the Event Manager.
+*
+*/
+rule "${policyName}.EVENT.MANAGER"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $clTimer : ControlLoopTimer ( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}: event={} manager={} clTimer={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $clTimer);
+ //
+ // Check which event this is.
+ //
+ ControlLoopEventManager.NEW_EVENT_STATUS eventStatus = $manager.onNewEvent($event);
+
+ //
+ // Check what kind of event this is
+ //
+ if (eventStatus == NEW_EVENT_STATUS.SUBSEQUENT_ONSET) {
+ //
+ // We don't care about subsequent onsets
+ //
+ logger.info("{}: {}: subsequent onset",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ retract($event);
+ return;
+ }
+ if (eventStatus == NEW_EVENT_STATUS.SYNTAX_ERROR) {
+ //
+ // Ignore any bad syntax events
+ //
+ logger.warn("{}: {}: syntax error",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ retract($event);
+ return;
+ }
+ //
+ // We only want the initial ONSET event in memory,
+ // all the other events need to be retracted to support
+ // cleanup and avoid the other rules being fired for this event.
+ //
+ if (eventStatus != NEW_EVENT_STATUS.FIRST_ONSET) {
+ logger.warn("{}: {}: no first onset",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ retract($event);
+ }
+
+ logger.debug("{}: {}: target={}", $params.getClosedLoopControlName(),
+ drools.getRule().getName(), $event.target);
+ //
+ // Now start seeing if we need to process this event
+ //
+ try {
+ //
+ // Check if this is a Final Event
+ //
+ VirtualControlLoopNotification notification = $manager.isControlLoopFinal();
+
+
+ if (notification != null) {
+ //
+ // Its final, but are we waiting for abatement?
+ //
+ if ($manager.getNumAbatements() > 0) {
+ logger.info("{}: {}: abatement received for {}. Closing the control loop",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event.requestID);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ //
+ // In this case, we are done
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Unlock the target
+ //
+ TargetLock lock = $manager.unlockCurrentOperation();
+ if (lock != null) {
+ logger.debug("{}: {}: retracting lock=", $params.getClosedLoopControlName(),
+ drools.getRule().getName(), lock);
+ retract(lock);
+ }
+ //
+ // Retract everything from memory
+ //
+ logger.info("{}: {}: retracting onset, manager, and timer",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+
+ retract($manager.getOnsetEvent());
+ retract($manager);
+ retract($clTimer);
+ //
+ // TODO - what if we get subsequent Events for this RequestID?
+ // By default, it will all start over again. May be confusing for Ruby.
+ // Or, we could track this and then subsequently ignore the events
+ //
+ } else {
+ //
+ // Check whether we need to wait for abatement
+ //
+ if ($manager.getProcessor().getControlLoop().getAbatement() == true && notification.notification == ControlLoopNotificationType.FINAL_SUCCESS) {
+ logger.info("{}: {}: waiting for abatement ..",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ } else {
+ logger.info("{}: {}: no abatement expect for {}. Closing the control loop",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event.requestID);
+
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+
+ //
+ // In this case, we are done
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Unlock the target
+ //
+ TargetLock lock = $manager.unlockCurrentOperation();
+ if (lock != null) {
+ logger.debug("{}: {}: retracting lock=", $params.getClosedLoopControlName(),
+ drools.getRule().getName(), lock);
+ retract(lock);
+ }
+ //
+ // Retract everything from memory
+ //
+ logger.info("{}: {}: retracting onset, manager, and timer",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+
+ retract($manager.getOnsetEvent());
+ retract($manager);
+ retract($clTimer);
+ }
+ }
+ } else {
+ //
+ // NOT final, so let's ask for the next operation
+ //
+ ControlLoopOperationManager operation = $manager.processControlLoop();
+ if (operation != null) {
+ logger.info("{}: {}: starting operation={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ operation);
+ //
+ // insert into memory
+ //
+ insert(operation);
+ //
+ // insert operation timeout object
+ //
+ OperationTimer opTimer = new OperationTimer();
+ opTimer.setClosedLoopControlName($event.closedLoopControlName);
+ opTimer.setRequestID($event.requestID.toString());
+ opTimer.setDelay(operation.getOperationTimeout().toString() + "s");
+ insert(opTimer);
+
+ //
+ // Let's ask for a lock right away
+ //
+ LockResult<GuardResult, TargetLock> result = $manager.lockCurrentOperation();
+ if (result.getA().equals(GuardResult.LOCK_ACQUIRED)) {
+ logger.info("{}: {}: guard lock acquired={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ result.getB());
+
+ //
+ // Insert into memory
+ //
+ insert(result.getB());
+ }
+ } else {
+ //
+ // Probably waiting for abatement
+ //
+ logger.info("{}: {}: no operation, probably waiting for abatement",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ }
+ }
+ } catch (Exception e) {
+ logger.warn("{}: {}: unexpected",
+ $params.getClosedLoopControlName(),
+ drools.getRule().getName(), e);
+
+ //
+ // TODO should we abort if we get an exception?
+ //
+ }
+
+end
+
+
+
+/*
+*
+*
+*
+*/
+rule "${policyName}.EVENT.MANAGER.OPERATION.NOT_LOCKED.TIMEOUT"
+ timer (int: 5s 5s)
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ not ( TargetLock (requestID == $event.requestID) )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}: event={} manager={} operation={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation);
+
+ //
+ // Need to ask for a Lock
+ //
+ LockResult<GuardResult, TargetLock> result = $manager.lockCurrentOperation();
+ if (result.getA().equals(GuardResult.LOCK_ACQUIRED)) {
+ logger.info("{}: {}: guard lock acquired={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ result.getB());
+
+ //
+ // Insert into memory
+ //
+ insert(result.getB());
+ }
+
+end
+
+/*
+*
+* Guard Permitted, let's send request to the actor.
+*
+*/
+rule "${policyName}.EVENT.MANAGER.OPERATION.LOCKED.GUARD_PERMITTED"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID, getGuardApprovalStatus() == "Permit" )
+ $lock : TargetLock (requestID == $event.requestID)
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}: event={} manager={} operation={} lock={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock);
+
+ Object request = $operation.getOperationRequest();
+
+ if (request != null) {
+ logger.debug("{}: {}: starting operation ..",
+ $params.getClosedLoopControlName(), drools.getRule().getName());
+ //
+ // Tell interested parties we are performing this Operation
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.notification = ControlLoopNotificationType.OPERATION;
+ notification.message = $operation.getOperationMessage();
+ notification.history = $operation.getHistory();
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+
+ switch ($operation.policy.getActor()){
+
+ case "APPC":
+
+ if (request instanceof Request) {
+ PolicyEngine.manager.deliver("APPC-CL", request);
+ }
+ else if (request instanceof LCMRequestWrapper) {
+ PolicyEngine.manager.deliver("APPC-LCM-READ", request);
+ }
+ break;
+ case "SO":
+ // at this point the AAI named query request should have already been made, the response recieved and used
+ // in the construction of the SO Request which is stored in operationRequest
+
+ if(request instanceof SORequest) {
+ // Call SO. The response will be inserted into memory once it's received
+ SOActorServiceProvider.sendRequest(drools.getWorkingMemory(), request);
+ }
+ break;
+ case "VFC":
+ if (request instanceof VFCRequest) {
+ // Start VFC thread
+ Thread t = new Thread(new VFCManager(drools.getWorkingMemory(), (VFCRequest)request));
+ t.start();
+ }
+ break;
+ }
+ } else {
+ //
+ // What happens if its null?
+ //
+ logger.warn("{}: {}: unexpected null operation request",
+ $params.getClosedLoopControlName(),
+ drools.getRule().getName());
+ }
+end
+
+
+/*
+*
+* We were able to acquire a lock so now let's ask Xacml Guard whether
+* we are allowed to proceed with the request to the actor.
+*
+*/
+rule "${policyName}.EVENT.MANAGER.OPERATION.LOCKED.GUARD_NOT_YET_QUERIED"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID, getGuardApprovalStatus() == "NONE" )
+ $lock : TargetLock (requestID == $event.requestID)
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}: event={} manager={} operation={} lock={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock);
+
+ //
+ // We are starting the operation but the actor won't be contacted until Guard is queried and permitted.
+ //
+ $operation.startOperation($event);
+
+ //
+ // Sending notification that we are about to query Guard ("DB write - start operation")
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.notification = ControlLoopNotificationType.OPERATION;
+ notification.message = $operation.getOperationMessage();
+ notification.history = $operation.getHistory();
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+
+ //
+ // Now send Guard Request to XACML Guard. In order to bypass the call to Guard,
+ // just change guardEnabled to false.
+ //
+ // In order to use REST XACML, provide a URL instead of "" as a second argument
+ // to the CallGuardTask() and set the first argument to null
+ // (instead of XacmlPdpEngine).
+ //
+ boolean guardEnabled = false;
+
+ if(guardEnabled){
+
+ Thread t = new Thread(new org.onap.policy.guard.CallGuardTask(
+ PolicyEngine.manager.getEnvironmentProperty("guard.url"),
+ drools.getWorkingMemory(),
+ $event.closedLoopControlName,
+ $operation.policy.getActor().toString(),
+ $operation.policy.getRecipe(),
+ $manager.getTargetInstance($operation.policy),
+ //$event.target,
+ $event.requestID.toString()
+ ));
+ t.start();
+ }
+ else{
+ insert(new PolicyGuardResponse("Permit", $event.requestID, $operation.policy.getRecipe()));
+ }
+
+end
+
+//
+// This rule will be triggered when a thread talking to the XACML Guard inserts a
+// guardResponse object into the working memory
+//
+rule "${policyName}.GUARD.RESPONSE"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $lock : TargetLock (requestID == $event.requestID)
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ $guardResponse : PolicyGuardResponse(requestID == $event.requestID, $operation.policy.recipe == operation)
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}: event={} manager={} operation={} lock={} opTimer={} guardResponse={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $opTimer, $guardResponse);
+
+
+ //we will permit the operation if there was no Guard for it
+ if("Indeterminate".equals($guardResponse.result)){
+ $guardResponse.result = "Permit";
+ }
+
+ //
+ // This notification has Guard result in "message". ("DB write - end operation in case of Guard Deny")
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.notification = ControlLoopNotificationType.OPERATION;
+ notification.message = $operation.getOperationMessage($guardResponse.result);
+ notification.history = $operation.getHistory();
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+
+ if("Permit".equals($guardResponse.result)){
+
+ modify($operation){setGuardApprovalStatus($guardResponse.result)};
+ }
+ else {
+ //This is the Deny case
+ $operation.setOperationHasGuardDeny();
+ retract($opTimer);
+ retract($operation);
+ modify($manager) {finishOperation($operation)};
+ }
+
+ retract($guardResponse);
+
+end
+
+/*
+*
+* This rule responds to APPC Response Events
+*
+* I would have like to be consistent and write the Response like this:
+* $response : Response( CommonHeader.RequestID == $onset.requestID )
+*
+* However, no compile error was given. But a runtime error was given. I think
+* because drools is confused between the classname CommonHeader vs the property CommonHeader.
+*
+*/
+rule "${policyName}.APPC.RESPONSE"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ $lock : TargetLock (requestID == $event.requestID)
+ $response : Response( getCommonHeader().RequestID == $event.requestID )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $opTimer, $response);
+ //
+ // Get the result of the operation
+ //
+ PolicyResult policyResult = $operation.onResponse($response);
+ if (policyResult != null) {
+ logger.debug("{}: {}: operation finished - result={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ policyResult);
+ //
+ // This Operation has completed, construct a notification showing our results. (DB write - end operation)
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ notification.message = $operation.getOperationHistory();
+ notification.history = $operation.getHistory();
+ if (policyResult.equals(PolicyResult.SUCCESS)) {
+ notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS;
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ } else {
+ notification.notification = ControlLoopNotificationType.OPERATION_FAILURE;
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ }
+ //
+ // Ensure the operation is complete
+ //
+ if ($operation.isOperationComplete() == true) {
+ //
+ // It is complete, remove it from memory
+ //
+ retract($operation);
+ //
+ // We must also retract the timer object
+ // NOTE: We could write a Rule to do this
+ //
+ retract($opTimer);
+ //
+ // Complete the operation
+ //
+ modify($manager) {finishOperation($operation)};
+ } else {
+ //
+ // Just doing this will kick off the LOCKED rule again
+ //
+ modify($operation) {};
+ }
+ } else {
+ //
+ // Its not finished yet (i.e. expecting more Response objects)
+ //
+ // Or possibly it is a leftover response that we timed the request out previously
+ //
+ }
+ //
+ // We are going to retract these objects from memory
+ //
+ retract($response);
+end
+
+/*
+*
+* The problem with Responses is that they don't have a controlLoopControlName
+* field in them, so the only way to attach them is via RequestID. If we have multiple
+* control loop .drl's loaded in the same container, we need to be sure the cleanup
+* rules don't remove Responses for other control loops.
+*
+*/
+rule "${policyName}.APPC.RESPONSE.CLEANUP"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $response : Response($id : getCommonHeader().RequestID )
+ not ( VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), requestID == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: orphan appc response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(), $id);
+
+ //
+ // Retract it
+ //
+ retract($response);
+end
+
+/*
+*
+* This rule responds to APPC Response Events using the new LCM interface provided by appc
+*
+*/
+rule "${policyName}.APPC.LCM.RESPONSE"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ $lock : TargetLock (requestID == $event.requestID)
+ $response : LCMResponseWrapper( getBody().getCommonHeader().getRequestId() == $event.requestID )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $operation, $opTimer, $response);
+
+ //
+ // Get the result of the operation
+ //
+ PolicyResult policyResult = $operation.onResponse($response);
+ if (policyResult != null) {
+ logger.debug("{}: {}: operation finished - result={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ policyResult);
+
+ //
+ // This Operation has completed, construct a notification showing our results. (DB write - end operation)
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ notification.message = $operation.getOperationHistory();
+ notification.history = $operation.getHistory();
+ if (policyResult.equals(PolicyResult.SUCCESS)) {
+ notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS;
+ } else {
+ notification.notification = ControlLoopNotificationType.OPERATION_FAILURE;
+ }
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Ensure the operation is complete
+ //
+ if ($operation.isOperationComplete() == true) {
+ //
+ // It is complete, remove it from memory
+ //
+ retract($operation);
+ //
+ // We must also retract the timer object
+ // NOTE: We could write a Rule to do this
+ //
+ retract($opTimer);
+ //
+ // Complete the operation
+ //
+ modify($manager) {finishOperation($operation)};
+ } else {
+ //
+ // Just doing this will kick off the LOCKED rule again
+ //
+ modify($operation) {};
+ }
+ } else {
+ //
+ // Its not finished yet (i.e. expecting more Response objects)
+ //
+ // Or possibly it is a leftover response that we timed the request out previously
+ //
+ }
+ //
+ // We are going to retract these objects from memory
+ //
+ retract($response);
+end
+
+/*
+*
+* Clean Up any lingering LCM reponses
+*
+*/
+rule "${policyName}.APPC.LCM.RESPONSE.CLEANUP"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $response : LCMResponseWrapper($id : getBody().getCommonHeader().getRequestId )
+ not ( VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), requestID == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: orphan appc response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(), $id);
+ //
+ // Retract it
+ //
+ retract($response);
+end
+
+/*
+*
+* This rule responds to SO Response Events
+*
+*/
+rule "${policyName}.SO.RESPONSE"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ $lock : TargetLock (requestID == $event.requestID)
+ $response : SOResponse( request.requestId == $event.requestID.toString() )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $operation, $opTimer, $response);
+
+ // Get the result of the operation
+ //
+ PolicyResult policyResult = $operation.onResponse($response);
+ if (policyResult != null) {
+ logger.debug("{}: {}: operation finished - result={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ policyResult);
+
+ //
+ // This Operation has completed, construct a notification showing our results
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ notification.message = $operation.getOperationHistory();
+ notification.history = $operation.getHistory();
+ if (policyResult.equals(PolicyResult.SUCCESS)) {
+ notification.notification = ControlLoopNotificationType.OPERATION_SUCCESS;
+ } else {
+ notification.notification = ControlLoopNotificationType.OPERATION_FAILURE;
+
+ }
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Ensure the operation is complete
+ //
+ if ($operation.isOperationComplete() == true) {
+ //
+ // It is complete, remove it from memory
+ //
+ retract($operation);
+ //
+ // We must also retract the timer object
+ // NOTE: We could write a Rule to do this
+ //
+ retract($opTimer);
+ //
+ // Complete the operation
+ //
+ modify($manager) {finishOperation($operation)};
+ } else {
+ //
+ // Just doing this will kick off the LOCKED rule again
+ //
+ modify($operation) {};
+ }
+ } else {
+ //
+ // Its not finished yet (i.e. expecting more Response objects)
+ //
+ // Or possibly it is a leftover response that we timed the request out previously
+ //
+ }
+ //
+ // We are going to retract these objects from memory
+ //
+ retract($response);
+
+end
+
+/*
+*
+* This rule responds to VFC Response Events
+*
+*/
+rule "${policyName}.VFC.RESPONSE"
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName(), closedLoopEventStatus == ControlLoopEventStatus.ONSET )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() )
+ $lock : TargetLock (requestID == $event.requestID)
+ $response : VFCResponse( requestId.toString() == $event.requestID.toString() )
+ then
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $operation, $opTimer, $response);
+
+ // Get the result of the operation
+ //
+ PolicyResult policyResult = $operation.onResponse($response);
+ if (policyResult != null) {
+ //
+ // This Operation has completed, construct a notification showing our results
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ notification.message = $operation.getOperationHistory();
+ notification.history = $operation.getHistory();
+ //
+ // Ensure the operation is complete
+ //
+ if ($operation.isOperationComplete() == true) {
+ //
+ // It is complete, remove it from memory
+ //
+ retract($operation);
+ //
+ // We must also retract the timer object
+ // NOTE: We could write a Rule to do this
+ //
+ retract($opTimer);
+ //
+ // Complete the operation
+ //
+ modify($manager) {finishOperation($operation)};
+ } else {
+ //
+ // Just doing this will kick off the LOCKED rule again
+ //
+ modify($operation) {};
+ }
+ } else {
+ //
+ // Its not finished yet (i.e. expecting more Response objects)
+ //
+ // Or possibly it is a leftover response that we timed the request out previously
+ //
+ }
+ //
+ // We are going to retract these objects from memory
+ //
+ retract($response);
+
+end
+
+/*
+*
+* This is the timer that manages the timeout for an individual operation.
+*
+*/
+rule "${policyName}.EVENT.MANAGER.OPERATION.TIMEOUT"
+ timer (expr: $to )
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID )
+ $opTimer : OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString(), $to : getDelay() )
+ $lock : TargetLock (requestID == $event.requestID)
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+ logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $operation, $lock, $operation, $opTimer);
+
+ //
+ // Tell it its timed out
+ //
+ $operation.setOperationHasTimedOut();
+ //
+ // Create a notification for it ("DB Write - end operation")
+ //
+ VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event);
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ notification.notification = ControlLoopNotificationType.OPERATION_FAILURE;
+ notification.message = $operation.getOperationHistory();
+ notification.history = $operation.getHistory();
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ //
+ // Get rid of the timer
+ //
+ retract($opTimer);
+ //
+ // Ensure the operation is complete
+ //
+ if ($operation.isOperationComplete() == true) {
+ //
+ // It is complete, remove it from memory
+ //
+ retract($operation);
+ //
+ // Complete the operation
+ //
+ modify($manager) {finishOperation($operation)};
+ } else {
+ //
+ // Just doing this will kick off the LOCKED rule again
+ //
+ modify($operation) {};
+ }
+end
+
+/*
+*
+* This is the timer that manages the overall control loop timeout.
+*
+*/
+rule "${policyName}.EVENT.MANAGER.TIMEOUT"
+ timer (expr: $to )
+ when
+ $params : Params( getClosedLoopControlName() == "${closedLoopControlName}" )
+ $event : VirtualControlLoopEvent( closedLoopControlName == $params.getClosedLoopControlName() )
+ $manager : ControlLoopEventManager( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID )
+ $clTimer : ControlLoopTimer ( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString(), $to : getDelay() )
+ $operations : LinkedList()
+ from collect( ControlLoopOperationManager( onset.closedLoopControlName == $event.closedLoopControlName, onset.requestID == $event.requestID ) )
+ $opTimers : LinkedList()
+ from collect( OperationTimer( closedLoopControlName == $event.closedLoopControlName, requestID == $event.requestID.toString() ) )
+ $locks : LinkedList()
+ from collect( TargetLock (requestID == $event.requestID) )
+ then
+
+ Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage());
+ logger.info("{}: {}", $params.getClosedLoopControlName(), drools.getRule().getName());
+
+ if ($operations == null) {
+ logger.debug("{}: {}: event={} manager={} clTimer={} operations=0",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $clTimer);
+ } else {
+ logger.debug("{}: {}: event={} manager={} clTimer={} operations={}",
+ $params.getClosedLoopControlName(), drools.getRule().getName(),
+ $event, $manager, $clTimer, $operations.size());
+ }
+ //
+ // Tell the Event Manager it has timed out
+ //
+ VirtualControlLoopNotification notification = $manager.setControlLoopTimedOut();
+ if (notification != null) {
+ notification.from = "policy";
+ notification.policyName = drools.getRule().getName();
+ notification.policyScope = "${policyScope}";
+ notification.policyVersion = "${policyVersion}";
+ //
+ // Let interested parties know
+ //
+ PolicyEngine.manager.deliver("POLICY-CL-MGT", notification);
+ }
+ //
+ // Retract EVERYTHING
+ //
+ retract($event);
+ retract($manager);
+ retract($clTimer);
+ if ($operations != null && $operations.size() > 0) {
+ Iterator<ControlLoopOperationManager> iter = $operations.iterator();
+ while (iter.hasNext()) {
+ ControlLoopOperationManager manager = iter.next();
+ retract(manager);
+ }
+ }
+ if ($opTimers != null && $opTimers.size() > 0) {
+ Iterator<OperationTimer> iter = $opTimers.iterator();
+ while (iter.hasNext()) {
+ OperationTimer opTimer = iter.next();
+ retract(opTimer);
+ }
+ }
+ if ($locks != null && $locks.size() > 0) {
+ Iterator<TargetLock> iter = $locks.iterator();
+ while (iter.hasNext()) {
+ TargetLock lock = iter.next();
+ //
+ // Ensure we release the lock
+ //
+ PolicyGuard.unlockTarget(lock);
+ //
+ //
+ //
+ retract(lock);
+ }
+ }
+end \ No newline at end of file
diff --git a/config/pe/push-policies.sh b/config/pe/push-policies.sh
index 02d1f254..a64c8e17 100644
--- a/config/pe/push-policies.sh
+++ b/config/pe/push-policies.sh
@@ -1,121 +1,202 @@
#! /bin/bash
+#########################################Upload BRMS Param Template##########################################
-echo "Pushing default policies"
+echo "Upload BRMS Param Template"
-# Sometimes brmsgw gets an error when trying to retrieve the policies on initial push,
-# so for the BRMS policies we will do a push, then delete from the pdp group, then push again.
-# Second push should be successful.
+curl -v --silent -X POST --header 'Content-Type: multipart/form-data' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST'
+-F "file=@ClosedLoopControlName.drl"
+'http://pdp:8081/pdp/api/policyEngineImport?importParametersJson=%7B%22serviceName%22%3A%ClosedLoopControlName%22%2C%20%22serviceType%22%20%3A%20%22BRMSPARAM%22%20%7D'
-echo "pushPolicy : PUT : com.vFirewall"
-curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
- "pdpGroup": "default",
- "policyName": "com.vFirewall",
- "policyType": "MicroService"
-}' 'http://pdp:8081/pdp/api/pushPolicy'
+#########################################Create BRMS Param policies##########################################
+
+echo "Create BRMSParam Operational Policies"
sleep 2
-echo "pushPolicy : PUT : com.vLoadBalancer"
-curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
- "pdpGroup": "default",
- "policyName": "com.vLoadBalancer",
- "policyType": "MicroService"
-}' 'http://pdp:8081/pdp/api/pushPolicy'
+echo "Create BRMSParamvFirewall Policy"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "policyConfigType": "BRMS_PARAM",
+ "policyName": "com.BRMSParamvFirewall",
+ "policyDescription": "BRMS Param vFirewall policy",
+ "policyScope": "com",
+ "attributes": {
+ "MATCHING": {
+ "controller" : "amsterdam"
+ },
+ "RULE": {
+ "templateName": "ClosedLoopControlName",
+ "closedLoopControlName": "ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a",
+ "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a%0D%0A++services%3A%0D%0A++++-+serviceInvariantUUID%3A+5cfe6f4a-41bc-4247-8674-ebd4b98e35cc%0D%0A++++++serviceUUID%3A+0f40bba5-986e-4b3c-803f-ddd1b7b25f24%0D%0A++++++serviceName%3A+57e66ea7-0ed6-45c7-970f%0D%0A++trigger_policy%3A+unique-policy-id-1-modifyConfig%0D%0A++timeout%3A+1200%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-modifyConfig%0D%0A++++name%3A+modify+packet+gen+config%0D%0A++++description%3A%0D%0A++++actor%3A+APPC%0D%0A++++recipe%3A+ModifyConfig%0D%0A++++target%3A%0D%0A++++++resourceID%3A+Eace933104d443b496b8.nodes.heat.vpg%0D%0A++++++type%3A+VNF%0D%0A++++retry%3A+0%0D%0A++++timeout%3A+300%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard"
+ }
+ }
+}' 'http://pdp:8081/pdp/api/createPolicy'
sleep 2
-echo "pushPolicy : PUT : com.BRMSParamvLBDemoPolicy"
-curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
- "pdpGroup": "default",
- "policyName": "com.BRMSParamvLBDemoPolicy",
- "policyType": "BRMS_Param"
-}' 'http://pdp:8081/pdp/api/pushPolicy'
+echo "Create BRMSParamvDNS Policy"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "policyConfigType": "BRMS_PARAM",
+ "policyName": "com.BRMSParamvDNS",
+ "policyDescription": "BRMS Param vDNS policy",
+ "policyScope": "com",
+ "attributes": {
+ "MATCHING": {
+ "controller" : "amsterdam"
+ },
+ "RULE": {
+ "templateName": "ClosedLoopControlName",
+ "closedLoopControlName": "ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3",
+ "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3%0D%0A++services%3A%0D%0A++++-+serviceName%3A+d4738992-6497-4dca-9db9%0D%0A++++++serviceInvariantUUID%3A+dc112d6e-7e73-4777-9c6f-1a7fb5fd1b6f%0D%0A++++++serviceUUID%3A+2eea06c6-e1d3-4c3a-b9c4-478c506eeedf%0D%0A++trigger_policy%3A+unique-policy-id-1-scale-up%0D%0A++timeout%3A+1200%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-scale-up%0D%0A++++name%3A+Create+a+new+VF+Module%0D%0A++++description%3A%0D%0A++++actor%3A+MSO%0D%0A++++recipe%3A+VF+Module+Create%0D%0A++++target%3A%0D%0A++++++type%3A+VNF%0D%0A++++retry%3A+0%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard"
+ }
+ }
+}' 'http://pdp:8081/pdp/api/createPolicy'
sleep 2
-echo "pushPolicy : PUT : com.BRMSParamvFWDemoPolicy"
-curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
- "pdpGroup": "default",
- "policyName": "com.BRMSParamvFWDemoPolicy",
- "policyType": "BRMS_Param"
-}' 'http://pdp:8081/pdp/api/pushPolicy'
+echo "Create BRMSParamVOLTE Policy"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "policyConfigType": "BRMS_PARAM",
+ "policyName": "com.BRMSParamVOLTE",
+ "policyDescription": "BRMS Param VOLTE policy",
+ "policyScope": "com",
+ "attributes": {
+ "MATCHING": {
+ "controller" : "amsterdam"
+ },
+ "RULE": {
+ "templateName": "ClosedLoopControlName",
+ "closedLoopControlName": "ControlLoop-VOLTE-2179b738-fd36-4843-a71a-a8c24c70c55b",
+ "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-VOLTE-2179b738-fd36-4843-a71a-a8c24c70c55b%0D%0A++trigger_policy%3A+unique-policy-id-1-restart%0D%0A++timeout%3A+3600%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-restart%0D%0A++++name%3A+Restart+the+VM%0D%0A++++description%3A%0D%0A++++actor%3A+VFC%0D%0A++++recipe%3A+Restart%0D%0A++++target%3A%0D%0A++++++type%3A+VM%0D%0A++++retry%3A+3%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard"
+ }
+ }
+}' 'http://pdp:8081/pdp/api/createPolicy'
sleep 2
-echo "deletePolicy : DELETE : com.vFirewall"
-curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
-"pdpGroup": "default",
-"policyComponent": "PDP",
-"policyName": "com.vFirewall",
-"policyType": "MicroService"
-}' 'http://pdp:8081/pdp/api/deletePolicy'
-
+echo "Create BRMSParamvCPE Policy"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/html' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "policyConfigType": "BRMS_PARAM",
+ "policyName": "com.BRMSParamvCPE",
+ "policyDescription": "BRMS Param vCPE policy",
+ "policyScope": "com",
+ "attributes": {
+ "MATCHING": {
+ "controller" : "amsterdam"
+ },
+ "RULE": {
+ "templateName": "ClosedLoopControlName",
+ "closedLoopControlName": "ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e",
+ "controlLoopYaml": "controlLoop%3A%0D%0A++version%3A+2.0.0%0D%0A++controlLoopName%3A+ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e%0D%0A++trigger_policy%3A+unique-policy-id-1-restart%0D%0A++timeout%3A+3600%0D%0A+%0D%0Apolicies%3A%0D%0A++-+id%3A+unique-policy-id-1-restart%0D%0A++++name%3A+Restart+the+VM%0D%0A++++description%3A%0D%0A++++actor%3A+APPC%0D%0A++++recipe%3A+Restart%0D%0A++++target%3A%0D%0A++++++type%3A+VM%0D%0A++++retry%3A+3%0D%0A++++timeout%3A+1200%0D%0A++++success%3A+final_success%0D%0A++++failure%3A+final_failure%0D%0A++++failure_timeout%3A+final_failure_timeout%0D%0A++++failure_retries%3A+final_failure_retries%0D%0A++++failure_exception%3A+final_failure_exception%0D%0A++++failure_guard%3A+final_failure_guard"
+ }
+ }
+}' 'http://pdp:8081/pdp/api/createPolicy'
+
+#########################################Create Micro Service Config policies##########################################
+
+echo "Create MicroService Config Policies"
sleep 2
-echo "deletePolicy : DELETE : com.vLoadBalancer"
-curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
-"pdpGroup": "default",
-"policyComponent": "PDP",
-"policyName": "com.vLoadBalancer",
-"policyType": "MicroService"
-}' 'http://pdp:8081/pdp/api/deletePolicy'
+echo "Create MicroServicevFirewall Policy"
+curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{
+ "configBody": "{\"service\": \"policy_tosca_tca\",\"location\": \"SampleServiceLocation\",\"uuid\": \"test\",\"policyName\": \"MicroServicevFirewall\",\"description\": \"MicroService vFirewall Policy\",\"configName\": \"SampleConfigName\",\"templateVersion\": \"OpenSource.version.1\",\"version\": \"1.0.0\",\"priority\": \"1\",\"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\",\"riskType\": \"SampleRiskType\",\"riskLevel\": \"1\",\"guard\": \"False\",\"content\": {\"policyVersion\": \"v0.0.1\",\"threshholds\": [{\"severity\": \"MAJOR\",\"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\",\"thresholdValue\": \"4000\",\"closedLoopEventStatus\": \"ONSET\",\"closedLoopControlName\": \"CL-FRWL-LOW-TRAFFIC-SIG-d925ed73-8231-4d02-9545-db4e101f88f8\",\"version\": \"1.0.2\",\"direction\": \"LESS_OR_EQUAL\"}, {\"severity\": \"CRITICAL\",\"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\",\"thresholdValue\": \"20000\",\"closedLoopEventStatus\": \"ONSET\",\"closedLoopControlName\": \"CL-FRWL-HIGH-TRAFFIC-SIG-EA36FE84-9342-5E13-A656-EC5F21309A09\",\"version\": \"1.0.2\",\"direction\": \"GREATER_OR_EQUAL\"}],\"policyName\": \"DCAE.Config_tca-hi-lo\",\"controlLoopSchemaType\": \"VNF\",\"policyScope\": \"DCAE\",\"eventName\": \"vFirewallBroadcastPackets\"}}",
+ "policyConfigType": "MicroService",
+ "policyName": "com.MicroServicevFirewall",
+ "onapName": "DCAE"
+}' 'http://pdp:8081/pdp/api/createPolicy'
+
sleep 2
-echo "deletePolicy : DELETE : com.BRMSParamvFWDemoPolicy"
-curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
-"pdpGroup": "default",
-"policyComponent": "PDP",
-"policyName": "com.BRMSParamvFWDemoPolicy",
-"policyType": "BRMS_Param"
-}' 'http://pdp:8081/pdp/api/deletePolicy'
+echo "Create MicroServicevDNS Policy"
+curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{
+ "configBody": "{ \"service\": \"policy_tosca_tca\", \"location\": \"SampleServiceLocation\", \"uuid\": \"test\", \"policyName\": \"MicroServicevDNS\", \"description\": \"MicroService vDNS Policy\", \"configName\": \"SampleConfigName\", \"templateVersion\": \"OpenSource.version.1\", \"version\": \"1.0.0\", \"priority\": \"1\", \"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\", \"riskType\": \"SampleRiskType\", \"riskLevel\": \"1\", \"guard\": \"False\", \"content\": { \"policyVersion\": \"v0.0.1\", \"threshholds\": [{ \"severity\": \"MAJOR\", \"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\", \"thresholdValue\": \"500\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-LBAL-LOW-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241AB1A\", \"version\": \"1.0.2\", \"direction\": \"LESS_OR_EQUAL\" }, { \"severity\": \"CRITICAL\", \"fieldPath\": \"$$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedBroadcastPacketsAccumulated\", \"thresholdValue\": \"5000\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-LBAL-HIGH-TRAFFIC-SIG-0C5920A6-B564-8035-C878-0E814352BC2B\", \"version\": \"1.0.2\", \"direction\": \"GREATER_OR_EQUAL\" }], \"policyName\": \"DCAE.Config_tca-hi-lo\", \"controlLoopSchemaType\": \"VM\", \"policyScope\": \"DCAE\", \"eventName\": \"vLoadBalancer\" } }",
+ "policyConfigType": "MicroService",
+ "policyName": "com.MicroServicevDNS",
+ "onapName": "DCAE"
+}' 'http://pdp:8081/pdp/api/createPolicy'
sleep 2
-echo "deletePolicy : DELETE : com.BRMSParamvLBDemoPolicy"
-curl -v --silent -X DELETE --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
-"pdpGroup": "default",
-"policyComponent": "PDP",
-"policyName": "com.BRMSParamvLBDemoPolicy",
-"policyType": "BRMS_Param"
-}' 'http://pdp:8081/pdp/api/deletePolicy'
+echo "Create MicroServicevCPE Policy"
+curl -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: DEVL' -d '{
+ "configBody": "{ \"service\": \"policy_tosca_tca\", \"location\": \"SampleServiceLocation\", \"uuid\": \"test\", \"policyName\": \"MicroServicevCPE\", \"description\": \"MicroService vCPE Policy\", \"configName\": \"SampleConfigName\", \"templateVersion\": \"OpenSource.version.1\", \"version\": \"1.0.0\", \"priority\": \"1\", \"policyScope\": \"resource=SampleResource,service=SampleService,type=SampleType,closedLoopControlName=SampleClosedLoop\", \"riskType\": \"SampleRiskType\", \"riskLevel\": \"1\", \"guard\": \"False\", \"content\": { \"policyVersion\": \"v0.0.1\", \"threshholds\": [{ \"severity\": \"MAJOR\", \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsDelta\", \"thresholdValue\": \"0\", \"closedLoopEventStatus\": \"ABATED\", \"closedLoopControlName\": \"CL-vCPEvGMUX-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241ABA1\", \"version\": \"1.0.2\", \"direction\": \"EQUAL\" }, { \"severity\": \"CRITICAL\", \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicPerformanceArray[*].receivedDiscardedPacketsDelta\", \"thresholdValue\": \"1000\", \"closedLoopEventStatus\": \"ONSET\", \"closedLoopControlName\": \"CL-vCPEvGMUX-TRAFFIC-SIG-FB480F95-A453-6F24-B767-FD703241ABA1\", \"version\": \"1.0.2\", \"direction\": \"GREATER_OR_EQUAL\" }], \"policyName\": \"DCAE.Config_tca-hi-lo\", \"controlLoopSchemaType\": \"VM\", \"policyScope\": \"DCAE\", \"eventName\": \"vCPEvGMUXPacketLoss\" } }",
+ "policyConfigType": "MicroService",
+ "policyName": "com.MicroServicevCPE",
+ "onapName": "DCAE"
+}' 'http://pdp:8081/pdp/api/createPolicy'
+
+
+
+#########################################Pushing BRMS Param policies##########################################
+
+echo "Pushing BRMSParam Operational policies"
sleep 2
-echo "pushPolicy : PUT : com.vFirewall"
+echo "pushPolicy : PUT : com.BRMSParamvFirewall"
curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
"pdpGroup": "default",
- "policyName": "com.vFirewall",
- "policyType": "MicroService"
+ "policyName": "com.BRMSParamvFirewall",
+ "policyType": "BRMS_Param"
}' 'http://pdp:8081/pdp/api/pushPolicy'
sleep 2
-echo "pushPolicy : PUT : com.vLoadBalancer"
+echo "pushPolicy : PUT : com.BRMSParamvDNS"
curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
"pdpGroup": "default",
- "policyName": "com.vLoadBalancer",
- "policyType": "MicroService"
-}' 'http://pdp:8081/pdp/api/pushPolicy'
+ "policyName": "com.BRMSParamvDNS",
+ "policyType": "BRMS_Param"
+}' 'http://pdp:8081/pdp/api/pushPolicy'
sleep 2
-echo "pushPolicy : PUT : com.BRMSParamvLBDemoPolicy"
+echo "pushPolicy : PUT : com.BRMSParamVOLTE"
curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
"pdpGroup": "default",
- "policyName": "com.BRMSParamvLBDemoPolicy",
+ "policyName": "com.BRMSParamVOLTE",
"policyType": "BRMS_Param"
}' 'http://pdp:8081/pdp/api/pushPolicy'
sleep 2
-echo "pushPolicy : PUT : com.BRMSParamvFWDemoPolicy"
+echo "pushPolicy : PUT : com.BRMSParamvCPE"
curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
"pdpGroup": "default",
- "policyName": "com.BRMSParamvFWDemoPolicy",
+ "policyName": "com.BRMSParamvCPE",
"policyType": "BRMS_Param"
}' 'http://pdp:8081/pdp/api/pushPolicy'
+#########################################Pushing MicroService Config policies##########################################
+
+echo "Pushing MicroService Config policies"
+
+sleep 2
+
+echo "pushPolicy : PUT : com.MicroServicevFirewall"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyName": "com.MicroServicevFirewall",
+ "policyType": "MicroService"
+}' 'http://pdp:8081/pdp/api/pushPolicy'
+
+sleep 2
+
+echo "pushPolicy : PUT : com.MicroServicevDNS"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyName": "com.MicroServicevDNS",
+ "policyType": "MicroService"
+}' 'http://pdp: 8081/pdp/api/pushPolicy'
+
+sleep 2
+
+echo "pushPolicy : PUT : com.MicroServicevCPE"
+curl -v --silent -X PUT --header 'Content-Type: application/json' --header 'Accept: text/plain' --header 'ClientAuth: cHl0aG9uOnRlc3Q=' --header 'Authorization: Basic dGVzdHBkcDphbHBoYTEyMw==' --header 'Environment: TEST' -d '{
+ "pdpGroup": "default",
+ "policyName": "com.MicroServicevCPE",
+ "policyType": "MicroService"
+}' 'http://pdp: 8081/pdp/api/pushPolicy' \ No newline at end of file